Carbon monoxide release from ultrasound-sensitive microbubbles improves endothelial cell growth.

Carbon monoxide is a gasotransmitter that may be beneficial for vascular tissue engineering and regenerative medicine strategies because it can promote endothelial cell (EC) proliferation and migration by binding to heme-containing compounds within cells. For example, CO may be beneficial for vascular cognitive impairment and dementia because many patients' disrupted blood-brain barriers do not heal naturally. However, control of the CO dose is critical, and new controlled delivery methods need to be developed. This study developed ultrasound-sensitive microbubbles with a carefully controlled precipitation technique, loaded them with CO, and assessed their ability to promote EC proliferation and function. Microbubbles fabricated with perfluoropentane exhibited good stability at room temperature, but they could still be ruptured and release CO in culture with application of ultrasound. Microbubbles synthesized from the higher boiling point compound, perfluorohexane, were too stable at physiological temperature. The lower-boiling point perfluoropentane microbubbles had good biocompatibility and appeared to improve VE-cadherin expression when CO was loaded in the bubbles. Finally, tissue phantoms were used to show that an imaging ultrasound probe can efficiently rupture the microbubbles and that the CO-loaded microbubbles can improve EC spreading and proliferation compared to control conditions without microbubbles as well as microbubbles without application of ultrasound. Overall, this study demonstrated the potential for use of these ultrasound-sensitive microbubbles for improving blood vessel endothelialization.

Modeling Gasotransmitter Availability to Brain Capillary Endothelial Cells with Ultrasound-sensitive Microbubbles.

BACKGROUND: Vascular cognitive impairment and dementia results from blood components passing through disrupted blood brain barriers (BBBs). Current treatments can reduce further progress of neuronal damage but do not treat the primary cause. Instead, these treatments typically aim to temporarily disrupt the BBB. Alternatively, this study computationally assessed the feasibility of delivering carbon monoxide (CO) from ultrasound-sensitive microbubbles (MBs) as a strategy to promote BBB repair and integrity. CO can interact with heme-containing compounds within cells and promote cell growth. However, careful dose control is critical for safety and efficacy because CO also binds at high affinity to hemoglobin (Hb). METHODS: Ultrasound activation was simulated at the internal carotid artery, and CO released from the resulting MB rupture was tracked along the shortest path to the BBB for several activation times and doses. The CO dose available to brain capillary endothelial cells (BCECs) was predicted by considering hemodynamics, mass transport, and binding kinetics. RESULTS: The half-life of CO binding to Hb indicated that CO is available to interact with BCECs for several cardiac cycles. Further, MB and COHb concentrations would not be near toxic levels and free Hb would be available. The axisymmetric model indicated that biologically-relevant CO concentrations will be available to BCECs, and these levels can be sustained with controlled ultrasound activation. A patient-specific geometry shows that while vessel tortuosity provides a heterogeneous response, a relevant CO concentration could still be achieved. CONCLUSIONS: This computational study demonstrates feasibility of the CO / MB strategy, and that controlled delivery is important for viability of this strategy.

Epsin Mimetic UPI Peptide Delivery Strategies to Improve Endothelization of Vascular Grafts.

Endothelialization of engineered vascular grafts for replacement of small-diameter coronary arteries remains a critical challenge. The ability for an acellular vascular graft to promote endothelial cell (EC) recruitment in the body would be very beneficial. This study investigated epsins as a target since they are involved in internalization of vascular endothelial growth factor receptor 2. Specifically, epsin-mimetic UPI peptides are delivered locally from vascular grafts to block epsin activity and promote endothelialization. The peptide delivery from fibrin coatings allowed for controlled loading and provided a significant improvement in EC attachment, migration, and growth in vitro. The peptides have even more important impacts after grafting into rat abdominal aortae. The peptides prevented graft thrombosis and failure that is observed with a fibrin coating alone. They also modulated the in vivo remodeling. The grafts are able to remodel without the formation of a thick fibrous capsule on the adventitia with the 100 µg mL-1 peptide-loaded condition, and this condition enabled the formation of a functional EC monolayer in the graft lumen after only 1 week. Overall, this study demonstrated that the local delivery of UPI peptides is a promising strategy to improve the performance of vascular grafts.

Peritoneal pre-conditioning impacts long-term vascular graft patency and remodeling.

There are questions about how well small-animal models for tissue-engineered vascular grafts (TEVGs) translate to clinical patients. Most TEVG studies used grafting times ≤6 months where conduits from generally biocompatible materials like poly(ε-caprolactone) (PCL) perform well. However, longer grafting times can result in significant intimal hyperplasia and calcification. This study tests the hypothesis that differences in pro-inflammatory response from pure PCL conduits will be consequential after long-term grafting. It also tests the long-term benefits of a peritoneal pre-implantation strategy on rodent outcomes. Electrospun conduits with and without peritoneal pre-implantation, and with 0 % and 10 % (w/w) collagen/PCL, were grafted into abdominal aortae of rats for 10 months. This study found that viability of control grafts without pre-implantation was reduced unlike prior studies with shorter grafting times, confirming the relevance of this model. Importantly, pre-implanted grafts had a 100 % patency rate. Further, pre-implantation reduced intimal hyperplasia within the graft. Differences in response between pure PCL and collagen/PCL conduits were observed (e.g., fewer CD80+ and CD3+ cells for collagen/PCL), but only pre-implantation had an effect on the overall graft viability. This study demonstrates how long-term grafting in rodent models can better evaluate viability of different TEVGs, and the benefits of the peritoneal pre-implantation step.

Reduced Platelet Adhesion for Blended Electrospun Meshes with Low Amounts of Collagen Type I.

A clinically approved, tissue engineered graft is needed as an alternative for small-diameter artery replacement. Collagen type I is commonly investigated for naturally derived grafts. However, collagen promotes thrombosis, currently requiring a graft pre-seeding step. This study investigates unique impacts of blending low collagen amounts with synthetic polymers on scaffold platelet response, which would allow for viable acellular grafts that can endothelialize in vivo. While platelet adhesion and activation are confirmed to be high with 50% collagen samples, low collagen ratios surprisingly exhibit the opposite, anti-thrombogenic effect. Different platelet interactions in these blended materials can be related to collagen structure. Low collagen ratios show homogenous distribution of the components within individual fibers. Importantly, blended collagen scaffolds exhibit significant differences from gelatin scaffolds, including retaining percentage of collagen after incubation. These findings correlate with functional benefits including better endothelial cell spreading on collagen versus gelatin blended materials. This appears to differ from the current paradigm that processing with harsh solvents will irreversibly denature collagen into less desirable gelatin, but an important distinction is the interaction between collagen and synthetic materials during processing. Overall, excellent anti-thrombogenic properties of low collagen blends and benefits after grafting show promise for this vascular graft strategy.

Three-dimensional printing of cell-laden microporous constructs using blended bioinks.

Hydrogels such as alginate and gelatin have shown potential as biomaterials in various three-dimensional (3D) bioprinting applications. However, parameters such as viscosity, porosity, and printability influence the performance of hydrogel-based biomaterials, and there are limited characterization studies conducted on the behavior of these constructs. In this work, a syringe-based extrusion bioprinter was used to print 3D constructs with bioink composed of various concentrations of alginate and gelatin along with fibrinogen and human umbilical vein endothelial cells. Instead of crosslinking the gelatin, the gelatin was left uncrosslinked to provide microporosity within the system that can impact the cellular response. Mechanical and biochemical characterization was performed to evaluate the structural stability and integrity of the printed constructs along with viability of embedded cells. Bioprinted constructs of a higher total concentration of alginate and gelatin yielded better stability and structural integrity after culture. More importantly, higher amounts of gelatin (i.e., 1:9 instead of 2:3 alginate:gelatin) were shown to improve printability, which is different than most studies that instead use alginate to improve printability. In addition, higher amounts of gelatin impacted the changes in surface morphological features of the constructs after incubation, and ultimately improved biocompatibility with our system. Overall, this study demonstrated that an uncrosslinked gelatin system can provide flexible printing parameters and surface morphologies, but careful control over the printing parameters may be required. The bioink concentration of 10% (w/v) with minimum alginate and higher gelatin concentration exhibited the best printability, cell survival, and viability.

Peritoneal Pre-conditioning Method for In Vivo Vascular Graft Maturation Utilizing a Porous Pouch.

Tissue-engineered vascular grafts (TEVGs) require strategies to allow graft remodeling but avoid stenosis and loss of graft mechanics. A variety of promising biomaterials and methods to incorporate cells have been tested, but intimal hyperplasia and graft thrombosis are still concerning when grafting in small-diameter arteries. Here, we describe a strategy using the peritoneal cavity as an "in vivo" bioreactor to recruit autologous cells to electrospun conduits, which can improve the in vivo response after aortic grafting. We focus on the methods for a novel hydrogel pouch design to enclose the electrospun conduits that can avoid peritoneal adhesion but still allow infiltration of peritoneal fluid and cells needed to provide benefits when subsequently grafting in the aorta.

Design and characterization of a porous pouch to prevent peritoneal adhesions during in vivo vascular graft maturation.

Vein grafts for coronary artery bypass are not available in more than 30% of patients due to prior use or systemic vascular diseases. Tissue engineered vascular grafts (TEVGs) have shown promise, but intimal hyperplasia and graft thrombosis are still concerns when grafted in small-diameter arteries. In this study, we utilized the peritoneal cavity as an "in vivo" bioreactor to recruit autologous cells to electrospun conduits enclosed within porous pouches to improve the response after grafting. Specifically, we designed a new poly (ethylene glycol)-based pouch to avoid adhesion to the peritoneal wall and still allow the necessary peritoneal fluid to reach the enclosed conduit. The pouch mechanics in compression and bending were determined through experiments and finite element simulations to optimize the pouch design. This included poly (ethylene glycol) concentration, pore density, and pouch size. We demonstrated that the optimized pouch was able to withstand the estimated forces applied in the rat peritoneal cavity and it allowed maturation of the enclosed electrospun conduit. This pouch significantly reduced peritoneal adhesion formation compared to polytetrafluoroethylene pouches that have been used previously, which overcomes this potential limitation to clinical translation. After aortic grafting of pre-conditioned conduits, patent grafts with limited intimal hyperplasia were observed. Overall, this study demonstrated a new pouch design that allows the in vivo bioreactor strategy to be used for vascular tissue engineering without the potential side effect of peritoneal adhesion formation.

Electrochemical fabrication of a biomimetic elastin-containing bi-layered scaffold for vascular tissue engineering.

Biomimetic tissue-engineered vascular grafts (TEVGs) have immense potential to replace diseased small-diameter arteries (<4 mm) for the treatment of cardiovascular diseases. However, biomimetic approaches developed thus far only partially recapitulate the physicochemical properties of the native vessel. While it is feasible to fabricate scaffolds that are compositionally similar to native vessels (collagen and insoluble elastic matrix) using freeze-drying, these scaffolds do not mimic the aligned topography of collagen and elastic fibers found in native vessels. Extrusion-based scaffolds exhibit anisotropic collagen orientation but these scaffolds are compositionally dissimilar (cannot incorporate insoluble elastic matrix). In this study, an electrochemical fabrication technique was employed to develop a biomimetic elastin-containing bi-layered collagen scaffold which is compositionally and structurally similar to native vessels and the effect of insoluble elastin incorporation on scaffold mechanics and smooth muscle cell (SMC) response was investigated. Further, the functionality of human umbilical vein endothelial cells (HUVECs) on the scaffold lumen surface was assessed via immunofluorescence. Results showed that incorporation of insoluble elastin maintained the overall collagen alignment within electrochemically aligned collagen (ELAC) fibers and this underlying aligned topography can direct cellular orientation. Ring test results showed that circumferential orientation of ELAC fibers significantly improved scaffold mechanics. Real-time PCR revealed that the expression of α-smooth muscle actin (Acta2) and myosin heavy chain (MyhII) was significantly higher on elastin containing scaffolds suggesting that the presence of insoluble elastin can promote contractility in SMCs. Further, mechanical properties of the scaffolds significantly improved post-culture indicating the presence of a mature cell-synthesized and remodeled matrix. Finally, HUVECs expressed functional markers on collagen lumen scaffolds. In conclusion, electrochemical fabrication is a viable method for the generation of a functional biomimetic TEVG with the potential to be used in bypass surgery.

Temporal changes in peritoneal cell phenotype and neoelastic matrix induction with hyaluronan oligomers and TGF-ß1 after implantation of engineered conduits.

The neoassembly and maturation of elastic matrix is an important challenge for engineering small-diameter grafts for patients with peripheral artery disease. We have previously shown that hyaluronan oligomers and transforming growth factor-ß (elastogenic factors or EFs) promote elastogenesis in smooth muscle cell (SMC) culture. However, their combined effects on macrophages and inflammatory cells in vivo are unknown. This information is needed to use the body (e.g., peritoneal cavity) as an "in vivo bioreactor" to recruit autologous cells to implanted EF-functionalized scaffolds. In this study, we determined if peritoneal fluid cells respond to EFs like smooth muscle cells and if these responses differ between cells sourced during different stages of inflammation triggered by scaffold implantation. Electrospun poly(ε-caprolactone)/collagen conduits were implanted in the peritoneal cavity prior to peritoneal fluid collection at 3-42 days postimplantation. Cells from the fluid were cultured in vitro with and without EFs to determine their response. Their phenotype/behaviour was assessed with a DNA assay, quantitative real-time PCR, and immunofluorescence. The EFs reduced peritoneal cell proliferation, maintained cell contractility, and unexpectedly did not exhibit proelastic effects, which we attributed to differences in cell density. We found the greatest elastin deposition in regions containing a high cell density. Further, we found that cells isolated from the peritoneal cavity at longer times after conduit implantation responded better to the EFs and exhibited more CD31 expression than cells at an earlier time point. Overall, this study provides information about the potential use of EFs in vivo and can guide the design of future tissue-engineered vascular grafts.

Rapid generation of three-dimensional microchannels for vascularization using a subtractive printing technique.

The development of tissue-engineered products has been limited by lack of a perfused microvasculature that delivers nutrients and maintains cell viability. Current strategies to promote vascularization such as additive three-dimensional printing techniques have limitations. This study validates the use of an ultra-fast laser subtractive printing technique to generate capillary-sized channels in hydrogels prepopulated with cells by demonstrating cell viability relative to the photodisrupted channels in the gel. The system can move the focal spot laterally in the gel at a rate of 2500 mm/s by using a galvanometric scanner to raster the in plane focal spot. A Galilean telescope allows z-axis movement. Blended hydrogels of polyethylene glycol and collagen with a range of optical clarities, mechanical properties and swelling behavior were tested to demonstrate that the subtractive printing process for writing vascular channels is compatible with all of the blended hydrogels tested. Channel width and patterns were controlled by adjusting the laser energy and focal spot positioning, respectively. After treatment, high cell viability was observed at distances greater than or equal to 18 µm from the fabricated channels. Overall, this study demonstrates a flexible technique that has the potential to rapidly generate channels in tissue-engineered constructs.

Peritoneal pre-conditioning reduces macrophage marker expression in collagen-containing engineered vascular grafts.

Engineered vascular grafts have shown promise as arteriovenous shunts, but they have not yet progressed to clinical trials for coronary arteries <4 mm in diameter such as the coronary arteries. Control over initial biomaterial properties and remodeling are necessary to generate viable grafts. In this study, we blended collagen with a synthetic material, poly(ε-caprolactone), to modulate the post-grafting inflammatory response while avoiding aneurysmal-like dilation and failure that can occur with pure collagen grafts. We also used pre-implantation in an "in vivo bioreactor" to recruit autologous cells and improve patency after grafting. Electrospun conduits were pre-implanted within rat peritoneal cavities and then grafted autologously into abdominal aortae. Conduit collagen percentages and pre-implantation were tested for their impact on graft remodeling and patency. Burst pressures >2000 mmHg, reproducible expansion with systole/diastole, and maintenance of mechanical integrity were observed. More importantly, peritoneal pre-implantation reduced overall lipid oxidation, intimal layer thickness, and expression of an M1 macrophage marker. The condition with the most collagen, 25%, exhibited the lowest expression of macrophage markers but also resulted in a thicker intimal layer. Overall, the 10% collagen/PCL with peritoneal pre-implantation condition appeared to exhibit the best combination of responses, and may result in improved clinical graft viability. STATEMENT OF SIGNIFICANCE: This manuscript describes a rodent study to systematically determine the benefits of both pre-implantation in the peritoneal cavity and specific ratios of collagen on engineered vascular graft viability. We show that pre-implantation had a significant benefit, including decreasing the expression of macrophage markers and reducing lipid oxidation after grafting. This study is the first time that the benefits of peritoneal pre-implantation have been compared to an "off the shelf," directly grafted control condition. We also demonstrated the importance of specific collagen ratio on the response after grafting. Overall, we feel that this article will be of interest to the field and it has the potential to address a significant clinical need: a graft for coronary arteries <4 mm in diameter.

Delivery of Antioxidant and Anti-inflammatory Agents for Tissue Engineered Vascular Grafts.

The treatment of patients with severe coronary and peripheral artery disease represents a significant clinical need, especially for those patients that require a bypass graft and do not have viable veins for autologous grafting. Tissue engineering is being investigated to generate an alternative graft. While tissue engineering requires surgical intervention, the release of pharmacological agents is also an important part of many tissue engineering strategies. Delivery of these agents offers the potential to overcome the major concerns for graft patency and viability. These concerns are related to an extended inflammatory response and its impact on vascular cells such as endothelial cells. This review discusses the drugs that have been released from vascular tissue engineering scaffolds and some of the non-traditional ways that the drugs are presented to the cells. The impact of antioxidant compounds and gasotransmitters, such as nitric oxide and carbon monoxide, are discussed in detail. The application of tissue engineering and drug delivery principles to biodegradable stents is also briefly discussed. Overall, there are scaffold-based drug delivery techniques that have shown promise for vascular tissue engineering, but much of this work is in the early stages and there are still opportunities to incorporate additional drugs to modulate the inflammatory process.

Compositions Including Synthetic and Natural Blends for Integration and Structural Integrity: Engineered for Different Vascular Graft Applications.

Tissue engineering approaches for small-diameter arteries require a scaffold that simultaneously maintains patency by preventing thrombosis and intimal hyperplasia, maintains its structural integrity after grafting, and allows integration. While synthetic and extracellular matrix-derived materials can provide some of these properties individually, developing a scaffold that provides the balanced properties needed for vascular graft survival in the clinic has been particularly challenging. After 30 years of research, there are now several scaffolds currently in clinical trials. However, these products are either being investigated for large-diameter applications or they require pre-seeding of endothelial cells. This progress report identifies important challenges unique to engineering vascular grafts for high pressure arteries less than 4 mm in diameter (e.g., coronary artery), and discusses limitations with the current usage of the term "small-diameter." Next, the composition and processing techniques used for generating tissue engineered vascular grafts (TEVGs) are discussed, with a focus on the benefits of blended materials. Other scaffolds for non-tissue engineering approaches and stents are also briefly mentioned for comparison. Overall, this progress report discusses the importance of defining the most critical challenges for small diameter TEVGs, developing new scaffolds to provide these properties, and determining acceptable benchmarks for scaffold responses in the body.

Collagen incorporation within electrospun conduits reduces lipid oxidation and impacts conduit mechanics.

Modulating the host response, including the accumulation of oxidized lipid species, is important for improving tissue engineered vascular graft (TEVG) viability. Accumulation of oxidized lipids promotes smooth muscle cell (SMC) hyper-proliferation and inhibits endothelial cell migration, which can lead to several of the current challenges for small-diameter TEVGs. Generating biomaterials that reduce lipid oxidation is important for graft survival and this assessment can provide a reliable correlation to clinical situations. In this study, we determined the collagen to poly(ε-caprolactone) (PCL) ratio required to limit the production of pro-inflammatory species, while maintaining the required mechanical strength for the graft. Electrospun conduits were prepared from 0%, 10%, and 25% blends of collagen/PCL (w/w) and implanted in the rat peritoneal cavity for four weeks. The results showed that adding collagen to the PCL conduits reduced the accumulation of oxidized lipid species within the implanted conduits. In addition, the ratio of collagen had a significant impact on the recruited cell phenotype and construct mechanics. All conduits exhibited greater than 44% yield strain and sufficient tensile strength post-implantation. In conclusion, these results demonstrate that incorporating collagen into synthetic electrospun scaffolds, both 10% and 25% blend conditions, appears to limit the pro-inflammatory characteristics after in vivo implantation.

Incorporation of photo-carbon monoxide releasing materials into electrospun scaffolds for vascular tissue engineering.

Hyper-proliferation of smooth muscle cells (SMCs) and a reduction in endothelial cell function are reasons for poor patency rates of current tissue engineered small-diameter vascular grafts. The controlled delivery of carbon monoxide (CO), a gasotransmitter involved in cell signaling, could improve vascular cell function in these grafts. Current CO releasing molecules (CORMs) can improve endothelialization of injured vessels with appropriate doses, but they still have limitations. The goal of this project was to generate a novel tissue engineered scaffold that includes a non-toxic and photoactivatable CORM. This is the first use of a CORM for tissue engineering. The results demonstrated that CORM-loaded, electrospun poly(ɛ-caprolactone) scaffolds can be photo-activated and release CO. The fluorescence that develops after CO release can be used to non-destructively track the extent of reaction. Further, activation can occur when both dry and incubated in cell culture conditions. However, incubation in serum protein-containing media decreases the time frame for activation, demonstrating the importance of testing the release profile in culture conditions. Rat SMCs were able to attach, grow, and express contractile SMC markers on activated CORM-loaded meshes and controls. Overall, these findings demonstrate that CORM-loaded electrospun scaffolds provide a promising delivery system for vascular tissue engineering.

Impact of elastin incorporation into electrochemically aligned collagen fibers on mechanical properties and smooth muscle cell phenotype.

Application of tissue-engineered vascular grafts (TEVGs) for the replacement of small-diameter arteries is limited due to thrombosis and intimal hyperplasia. Previous studies have attempted to address the limitations of TEVGs by developing scaffolds that mimic the composition (collagen and elastin) of native arteries to better match the mechanical properties of the graft with the native tissue. However, most existing scaffolds do not recapitulate the aligned topography of the collagen fibers found in native vessels. In the current study, based on the principles of isoelectric focusing, two different types of elastin (soluble and insoluble) were incorporated into highly oriented electrochemically aligned collagen (ELAC) fibers and the effect of elastin incorporation on the mechanical properties of the ELAC fibers and smooth muscle cell (SMC) phenotype was investigated. The results indicate that elastin incorporation significantly decreased the modulus of ELAC fibers to converge upon that of native vessels. Further, a significant increase in yield strain and decrease in Young's modulus was observed on all fibers post SMC culture compared with before the culture. Real-time polymerase chain reaction results showed a significant increase in the expression of α-smooth muscle actin and calponin on ELAC fibers with insoluble elastin, suggesting that incorporation of insoluble elastin induces a contractile phenotype in SMCs after two weeks of culture on ELAC fibers. Immunofluorescence results showed that calponin expression increased with time on all fibers. In conclusion, insoluble elastin incorporated ELAC fibers have the potential to be used for the development of functional TEVGs for the repair and replacement of small-diameter arteries.

Composition of intraperitoneally implanted electrospun conduits modulates cellular elastic matrix generation.

Improving elastic matrix generation is critical to developing functional tissue engineered vascular grafts. Therefore, this study pursued a strategy to grow autologous tissue in vivo by recruiting potentially more elastogenic cells to conduits implanted within the peritoneal cavity. The goal was to determine the impacts of electrospun conduit composition and hyaluronan oligomer (HA-o) modification on the recruitment of peritoneal cells, and their phenotype and ability to synthesize elastic matrix. These responses were assessed as a function of conduit intra-peritoneal implantation time. This study showed that the blending of collagen with poly(ε-caprolactone) (PCL) promotes a faster wound healing response, as assessed by trends in expression of macrophage and smooth muscle cell (SMC) contractile markers and in matrix deposition, compared to the more chronic response for PCL alone. This result, along with the increase in elastic matrix production, demonstrates the benefits of incorporating as little as 25% w/w collagen into the conduit. In addition, PCR analysis demonstrated the challenges in differentiating between a myofibroblast and an SMC using traditional phenotypic markers. Finally, the impact of the tethered HA-o is limited within the inflammatory environment, unlike the significant response found previously in vitro. In conclusion, these results demonstrate the importance of both careful control of implanted scaffold composition and the development of appropriate delivery methods for HA-o.