Biodegradable Polymer Matrix Composites Containing Graphene-Related Materials for Antibacterial Applications: A Critical Review.

For the first time, the present review critically evaluates biodegradable polymer matrix composites containing graphene-related materials (GRMs) for antibacterial applications while discussing their development, processing routes, mechanical properties, and antibacterial activity. Due to its suitable biological properties and processability, chitosan has been the most widely used biodegradable polymer for the fabrication of GRM-containing composites with antibacterial properties. The majority of biodegradable polymers (including cellulose-, gelatine-, PVA-, PCL-, and PHA-based polymers) exhibit little to no antibacterial effect alone; however, they show significant antibacterial activity (>70%) when combined with GRMs. In vitro and in vivo studies indicate that GRMs functionalization with biodegradable polymers also reduces potential GRM cytotoxicity. Overall, GRMs in biodegradable polymer matrices provide attractive antibacterial activity against a broad spectrum of bacteria (>30 different bacteria) along with improved mechanical properties over pristine polymers, where the type and the degree of improvement provided by GRMs depend on the specific matrix. For example, the addition of GRMs into chitosan, PVA, and PCL matrices increases their tensile strength by 80%, 180%, and 40%, respectively. Challenges remain in understanding the effects of processing routes and post-processing methods on the antibacterial activity and biocompatibility of biodegradable polymer/GRM composites. Given their promising properties and functionality, research on these composites is expected to further increase along with the implementation of new composite systems. These would include a wide range of applications, e.g., wound dressings, tissue engineering, drug delivery, biosensing, and photo-thermal therapy, as well as non-medical use, e.g., antibacterial food packaging, water treatment, and antibacterial fabrics. STATEMENT OF SIGNIFICANCE: Graphene-related materials (GRMs) in polymer matrices can provide excellent antibacterial activity against a broad spectrum of bacteria together with improved mechanical properties (e.g., tensile strength and elastic modulus) over pristine polymers; thus, research efforts and applications of biodegradable polymer matrix composites containing GRMs have increased notably in the last ten years. For the first time, the present review critically evaluates biodegradable polymer matrix composites containing GRMs for antibacterial applications while discussing their development, processing routes, mechanical properties, and antibacterial activity. Future research directions for each composite system are proposed to shed light on overcoming the existing challenges in composite performance (e.g., mechanical properties, toxicity) reported in the literature.

Electrophoretic co-deposition of PEEK-hydroxyapatite composite coatings for biomedical applications.

This study focuses on the optimization of electrophoretic deposition (EPD) and suspension parameters for producing PEEK-hydroxyapatite (HA) coatings with feasible microstructure, adhesion strength, and in-vitro bioactivity. Nanostructured hydroxyapatite (HA) micro-granules were incorporated with PEEK to form PEEK-hydroxyapatite composite coatings via EPD. After EPD, a heat-treatment at 375 °C was applied for densification of the coatings and for enhancing the adhesion between the coatings and the substrates. It was found that both adhesion strength and in-vitro bioactivity of the coatings were dependent on the PEEK and HA relative contents. Thus, increasing the amount of HA improved the bioactivity while decreased the adhesion strength of the coatings. Apatite-like layer formation was observed on coatings with high HA content after incubation for three days in simulated body fluid (SBF). Finally, a deposition mechanism was proposed for the EPD of the PEEK-hydroxyapatite composite system.