Structural Toughness of Fluorinated-Nitrided Interphase Passivation Layers for Lithium-Ion Batteries: A Reactive Molecular Dynamics Study.

The performance of lithium-ion batteries largely depends on the stability of the solid electrolyte interphase (SEI) layer formed on the anode surface. Strategies to improve SEI robustness often rely on optimizing its composition through electrolytic additives. Recently, the amalgamation of fluorinated cosolvents with nitride sources as additives has been shown to enable the construction of sustainable fluorinated-nitrided SEI layers (FN-SEI). Furthermore, the presence of lithiophilic nitrides embedded in lithium fluoride (LiF) was found to contribute toward stability of a beneficial amorphous phase for interfacial passivation. However, there is a lack of understanding on how key indicators of mechanical longevity, like plasticity and fracture resistance, may evolve in such multiphase SEI building blocks. Herein, in conjunction with first-principles calculations, a reactive force field (ReaxFF) has been developed for deriving new mechanistic insights into the intriguing FN-SEI. Our studies demonstrate that owing to a significant elasticity mismatch, the hard nitride phases have a propensity to affect the native deformation modes when embedded in a soft amorphous LiF-rich matrix. Impact of the volume fraction and distribution of the nitride (Li3N) phases are discussed from the perspective of how they interfere with the propagation of shear bands. Interestingly, brittle-ductile-brittle regimes are recognized along the nitride infusion window, providing a glimpse into the effect of phase distribution on the structural toughness of the LiF-Li3N-enhanced SEI.

Amorphization of Inorganic Solid Electrolyte Interphase Components and Its Impact on Enhancing Their Transport and Mechanical Properties.

The safety and cycle life of lithium-ion batteries (LIBs) are largely determined by the solid electrolyte interphase (SEI) formed on the surface of the anode. However, there is still a lack of understanding regarding the structure and properties of the individual SEI components. Among others, lithium oxide (Li2O), lithium carbonate (Li2CO3), and lithium fluoride (LiF) are known to be the main components of the inorganic SEI layer in conventional LIBs, but their intrinsic protective roles remain controversial. Herein, we present the transformational effects of their amorphous phase on the mechanical and transport characteristics, based on first-principles calculations. Our studies clearly demonstrate that their amorphous phases exhibit significantly improved Li-ion conductivity when compared to the crystalline structures. Additionally, among them, amorphous LiF emerges as a frontrunner for fast Li+ ion transportation, reversing the conventionally understood hierarchy. Under ambient conditions, the amorphous phases of LiF, Li2O, and Li2CO3 are thermodynamically unstable and tend to undergo recrystallization. However, this work highlights that exceptionally ductile and resilient amorphous phases can form if SEI formation and growth would involve some admixing of lithiophilic impurities like nitrogen (N) within the host matrices.

Highly Selective, Defect-Induced Photocatalytic CO2 Reduction to Acetaldehyde by the Nb-Doped TiO2 Nanotube Array under Simulated Solar Illumination.

The adsorption and activation of CO2 molecules on the surface of photocatalysts are critical steps to realize efficient solar energy-induced CO2 conversion to valuable chemicals. In this work, a defect engineering approach of a high-valence cation Nb-doping into TiO2 was developed, which effectively enhanced the adsorption and activation of CO2 molecules on the Nb-doped TiO2 surface. A highly ordered Nb-doped TiO2 nanotube array was prepared by anodization of the Ti-Nb alloy foil and subsequent annealing at 550 °C in air for 2 h for its crystallization. Our sample showed a superior photocatalytic CO2 reduction performance under simulated solar illumination. The main CO2 reduction product was a higher-energy compound of acetaldehyde, which could be easily transported and stored and used to produce various key chemicals as intermediates. The acetaldehyde production rate was over ∼500 µmol·g-1·h-1 with good stability for repeated long-time uses, and it also demonstrated a superior product selectivity to acetaldehyde of over 99%. Our work reveals that the Nb-doped TiO2 nanotube array could be a promising candidate with high efficiency and good product selectivity for the photocatalytic CO2 reduction with solar energy.

Stable Potassium Metal Anodes with an All-Aluminum Current Collector through Improved Electrolyte Wetting.

This is the first report of successful potassium metal battery anode cycling with an aluminum-based rather than copper-based current collector. Dendrite-free plating/stripping is achieved through improved electrolyte wetting, employing an aluminum-powder-coated aluminum foil "Al@Al," without any modification of the support surface chemistry or electrolyte additives. The reservoir-free Al@Al half-cell is stable at 1000 cycles (1950 h) at 0.5 mA cm-2 , with 98.9% cycling Coulombic efficiency and 0.085 V overpotential. The pre-potassiated cell is stable through a wide current range, including 130 cycles (2600 min) at 3.0 mA cm-2 , with 0.178 V overpotential. Al@Al is fully wetted by a 4 m potassium bis(fluorosulfonyl)imide-dimethoxyethane electrolyte (θCA  = 0°), producing a uniform solid electrolyte interphase (SEI) during the initial galvanostatic formation cycles. On planar aluminum foil with a nearly identical surface oxide, the electrolyte wets poorly (θCA  = 52°). This correlates with coarse irregular SEI clumps at formation, 3D potassium islands with further SEI coarsening during plating/stripping, possibly dead potassium metal on stripped surfaces, and rapid failure. The electrochemical stability of Al@Al versus planar Al is not related to differences in potassiophilicity (nearly identical) as obtained from thermal wetting experiments. Planar Cu foils are also poorly electrolyte-wetted and become dendritic. The key fundamental takeaway is that the incomplete electrolyte wetting of collectors results in early onset of SEI instability and dendrites.

In situ healing of dendrites in a potassium metal battery.

The use of potassium (K) metal anodes could result in high-performance K-ion batteries that offer a sustainable and low-cost alternative to lithium (Li)-ion technology. However, formation of dendrites on such K-metal surfaces is inevitable, which prevents their utilization. Here, we report that K dendrites can be healed in situ in a K-metal battery. The healing is triggered by current-controlled, self-heating at the electrolyte/dendrite interface, which causes migration of surface atoms away from the dendrite tips, thereby smoothening the dendritic surface. We discover that this process is strikingly more efficient for K as compared to Li metal. We show that the reason for this is the far greater mobility of surface atoms in K relative to Li metal, which enables dendrite healing to take place at an order-of-magnitude lower current density. We demonstrate that the K-metal anode can be coupled with a potassium cobalt oxide cathode to achieve dendrite healing in a practical full-cell device.

Effect of cobalt content on the electrochemical properties and structural stability of NCA type cathode materials.

At present, the most common type of cathode materials, NCA (Li1-xNi0.80Co0.15Al0.05O2, x = 0 to 1), have a very high concentration of cobalt. Since cobalt is toxic and expensive, the existing design of cathode materials is neither cost-effective nor environmentally benign. We have performed density functional theory (DFT) calculations to investigate electrochemical, electronic, and structural properties of four types of NCA cathode materials with the simultaneous decrease in Co content along with the increase in Ni content. Our results show that even if the cobalt concentration is significantly decreased from 16.70% (NCA_I) to 4.20% (NCA_IV), variation in intercalation potential and specific capacity is not significant. For example, in the case of 50% Li concentration, the voltage drop is only ∼17% while the change in specific capacity is negligible. Moreover, we have also explored the influence of sodium doping in the intercalation site on the electrochemical, electronic, and structural properties. By considering two extreme cases of NCAs (i.e., with highest and lowest Co content: NCA_I and NCA_IV, respectively), we have demonstrated the importance of Na doping from the structural and electronic point of view. Our results provide insight into the design of environmentally benign, low-cost cathode materials with reduced cobalt concentration.

Utilizing van der Waals Slippery Interfaces to Enhance the Electrochemical Stability of Silicon Film Anodes in Lithium-Ion Batteries.

High specific capacity anode materials such as silicon (Si) are increasingly being explored for next-generation, high performance lithium (Li)-ion batteries. In this context, Si films are advantageous compared to Si nanoparticle based anodes since in films the free volume between nanoparticles is eliminated, resulting in very high volumetric energy density. However, Si undergoes volume expansion (contraction) under lithiation (delithiation) of up to 300%. This large volume expansion leads to stress build-up at the interface between the Si film and the current collector, leading to delamination of Si from the surface of the current collector. To prevent this, adhesion promotors (such as chromium interlayers) are often used to strengthen the interface between the Si and the current collector. Here, we show that such approaches are in fact counter-productive and that far better electrochemical stability can be obtained by engineering a van der Waals "slippery" interface between the Si film and the current collector. This can be accomplished by simply coating the current collector surface with graphene sheets. For such an interface, the Si film slips with respect to the current collector under lithiation/delithiation, while retaining electrical contact with the current collector. Molecular dynamics simulations indicate (i) less stress build-up and (ii) less stress "cycling" on a van der Waals slippery substrate as opposed to a fixed interface. Electrochemical testing confirms more stable performance and much higher Coulombic efficiency for Si films deposited on graphene-coated nickel (i.e., slippery interface) as compared to conventional nickel current collectors.

Self-heating-induced healing of lithium dendrites.

Lithium (Li) metal electrodes are not deployable in rechargeable batteries because electrochemical plating and stripping invariably leads to growth of dendrites that reduce coulombic efficiency and eventually short the battery. It is generally accepted that the dendrite problem is exacerbated at high current densities. Here, we report a regime for dendrite evolution in which the reverse is true. In our experiments, we found that when the plating and stripping current density is raised above ~9 milliamperes per square centimeter, there is substantial self-heating of the dendrites, which triggers extensive surface migration of Li. This surface diffusion heals the dendrites and smoothens the Li metal surface. We show that repeated doses of high-current-density healing treatment enables the safe cycling of Li-sulfur batteries with high coulombic efficiency.

Protecting Silicon Film Anodes in Lithium-Ion Batteries Using an Atomically Thin Graphene Drape.

Silicon (Si) shows promise as an anode material in lithium-ion batteries due to its very high specific capacity. However, Si is highly brittle, and in an effort to prevent Si from fracturing, the research community has migrated from the use of Si films to Si nanoparticle based electrodes. However, such a strategy significantly reduces volumetric energy density due to the porosity of Si nanoparticle electrodes. Here we show that contrary to conventional wisdom, Si films can be stabilized by two strategies: (a) anchoring the Si films to a carbon nanotube macrofilm (CNM) current collector and (b) draping the films with a graphene monolayer. After electrochemical cycling, the graphene-coated Si films on CNM resembled a tough mud-cracked surface in which the graphene capping layer suppresses delamination and stabilizes the solid electrolyte interface. The graphene-draped Si films on CNM exhibit long cycle life (>1000 charge/discharge steps) with an average specific capacity of ∼806 mAh g-1. The volumetric capacity averaged over 1000 cycles of charge/discharge is ∼2821 mAh cm-3, which is 2 to 5 times higher than what is reported in the literature for Si nanoparticle based electrodes. The graphene-draped Si anode could also be successfully cycled against commercial cathodes in a full-cell configuration.