Lanthanide sorbent based on magnetite nanoparticles functionalized with organophosphorus extractants.

In this work, an adsorbent was prepared based on the attachment of organophosphorus acid extractants, namely, D2EHPA, CYANEX 272, and CYANEX 301, to the surface of superparamagnetic magnetite (Fe3O4) nanoparticles. The synthesized nanoparticles were coated with oleic acid, first by a chemisorption mechanism and later by the respective extractant via physical adsorption. The obtained core-shell functionalized magnetite nanoparticle composites were characterized by dynamic light scattering, scanning electron microscopy, transmission electron microscopy, thermogravimetry, infrared absorption and vibrating sample magnetometry. All the prepared nanoparticles exhibited a high saturation magnetization capacity that varied between 72 and 46 emu g-1 and decreased as the magnetite nanoparticle was coated with oleic acid and functionalized. The scope of this study also included adsorption tests for lanthanum, cerium, praseodymium, and neodymium and the corresponding analysis of their results. Sorption tests indicated that the functionalized nanoparticles were able to extract the four studied lanthanide metal ions, although the best extraction performance was observed when the sorbent was functionalized with CYANEX 272, which resulted in a loading capacity of approximately 12-14 mgLa/gMNP. The magnetization of the synthesized nanoparticles was verified during the separation of the lanthanide-loaded sorbent from the raffinate by using a conventional magnet.

Cr(VI) sorption behavior from aqueous solutions onto polymeric microcapsules containing a long-chain quaternary ammonium salt: kinetics and thermodynamics analysis.

This work studies the adsorption of Cr(VI) ions from an aqueous acid solution on hydrophobic polymeric microcapsules containing a long-chain quaternary ammonium salt-type extractant immobilized in their pore structure. The microcapsules were synthesized by adding the extractant Aliquat 336 during the in situ radical copolymerization of the monomers styrene (ST) and ethylene glycol dimethacrylate (EGDMA). The microcapsules, which had a spherical shape with a rough surface, behaved as efficient adsorbents for Cr(VI) at the tested temperatures. The results of kinetics experiments carried out at different temperatures showed that the adsorption process fits well to a pseudo-second-order with an activation energy of 82.7 kJ mol(-1), confirming that the sorption process is controlled by a chemisorption mechanism. Langmuir's isotherms were found to represent well the experimentally observed sorption data. Thermodynamics parameters, namely, changes in standard free energy (DeltaG(0)), enthalpy (DeltaH(0)), and entropy (DeltaS(0)), are also calculated. The results indicate that the chemisorption process is spontaneous and exothermic. The entropy change value measured in this study shows that metal adsorbed on microcapsules leads to a less chaotic system than a liquid-liquid extraction system.

Comparative studies on polyelectrolyte complexes and mixtures of chitosan-alginate and chitosan-carrageenan as prolonged diltiazem clorhydrate release systems.

The aim of this work was to evaluate the possibility of using mixtures and/or polyelectrolyte complexes from both chitosan-alginate and chitosan-carrageenan as prolonged drug release systems. Different dissolution profiles were obtained by changing the polymer matrix system (chitosan-alginate or chitosan-carrageenan) and the method used to include these polymers into the formulation (physical mixture or polyelectrolyte complex). Drug dissolution profiles from the matrices have been discussed by considering the swelling behavior of the polymers used. The swelling behavior of the chitosan-carrageenan and chitosan-alginate systems was analyzed by using the Hopfenberg model which permits to separate the diffusional contribution, kf, from the relaxational contribution, kr, involved in solvent penetration/sorption in glassy polymers. The chitosan-alginate system is better than the chitosan-carrageenan system as prolonged drug release matrix because the drug release is controlled at low percentage of the polymers in the formulation, the mean dissolution time is high, and different dissolution profiles could be obtained by changing the mode of inclusion of the polymers. Good agreement between td and kf/kr values for the system chitosan-alginate was found, which means that the swelling behavior of the polymers controlled the drug release from the matrix. In the case of the system chitosan-carrageenan, the high capacity of carrageenan promotes the entry of water into the tablet and therefore the main mechanism of drug release would be the disintegration instead of the swelling of the matrix.

Extraction of molybdenum by a supported liquid membrane method.

This is a report on the extraction of molybdenum(VI) ions using a supported liquid membrane, prepared by dissolving in kerosene, the extractant Alamine 336 (a long-chain tertiary amine) employed as mobile carrier. A flat hydrophobic microporous membrane was utilised as solid support. Appropriate conditions for Mo(VI) extraction through the liquid membrane were obtained from the results of liquid-liquid extraction and stripping partition experiments. The influence of feed solution acidity, the carrier extractant concentration in the organic liquid film and the content of strip agent on the metal flux through membrane were investigated. It was established that maximal extraction of metal is achieved at a pH 2.0 if sulphuric acid is used in the feed solution and at a pH value over 11.0 if Na(2)CO(3) is used as strip agent. Moreover, the molybdenum extraction through membrane is enhanced when a 0.02 mol l(-1) content of the amine carrier in the organic phase is used. The present paper deals with an equilibrium investigation of the extraction of Mo(VI) by Alamine 336 and its permeation conditions through the liquid membrane, and examines a possible mechanism of extraction.