Correction: Revealing instability and irreversibility in nonaqueous sodium-O2 battery chemistry.

Correction for 'Revealing instability and irreversibility in nonaqueous sodium-O2 battery chemistry' by Sayed Youssef Sayed et al., Chem. Commun., 2016, 52, 9691-9694.

Evaluation and Stability of PEDOT Polymer Electrodes for Li-O2 Batteries.

Lithium-air (O2) batteries have shown great promise because of their high gravimetric energy density-an order of magnitude greater than Li-ion-but challenges such as electrolyte and electrode instability have led to poor capacity retention and low cycle life. Positive electrodes such as carbon and inorganic metal oxides have been heavily explored, but the degradation of carbon and the limited surface area of the metal oxides limit their practical use. In this work, we study the electron-conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and show it can support oxygen reduction to form Li2O2 in a nonaqueous environment. We also propose a degradation mechanism and show that the formation of sulfone functionalities on the PEDOT surface and cleavage of the polymer repeat unit impairs electron conductivity and leads to poor cycling. Our findings are important in the search for new Li-O2 electrodes, and the physical insights provided are significant and timely.

The effect of water on discharge product growth and chemistry in Li-O2 batteries.

Understanding what controls Li-O2 battery discharge product chemistry and morphology is key to enabling its practical deployment as a low-cost, high-specific-energy energy conversion technology. Several studies have recently shown that the addition of substantial quantities (hundreds to thousands ppm) of water and weak acids to dimethoxyethane (DME)-based electrolytes can significantly increase Li-O2 battery discharge capacity, without substantially changing the discharge product chemistry, which remains Li2O2. The exact mechanisms behind these device-level improvements, however, are not yet understood. In this study, we show that the presence of water in a DME-based electrolyte decreases the rate of Li2O2 nucleation on the electrode surface during Li-O2 battery discharge, using potentiostatic electrochemical measurements, and direct, ex situ observations of Li2O2 particles. We also show that adding water to an acetonitrile (MeCN)-based electrolyte results in LiOH upon discharge, as opposed to only Li2O2. Using first principles calculations, we propose that this change in discharge product chemistry is attributable to increased proton availability, as shown by a lower pKa for water in MeCN than in DME. This study combines kinetic and morphological analyses with first principles calculations, and elucidates relationships among electrolyte composition, discharge product chemistry and growth mechanisms for the rational design of efficient metal-air batteries.

Revealing instability and irreversibility in nonaqueous sodium-O2 battery chemistry.

Charging kinetics and reversibility of Na-O2 batteries can be influenced greatly by the particle size of NaO2 formed upon discharge, and exposure time (reactivity) of NaO2 to the electrolyte. Micrometer-sized NaO2 cubes formed at high discharge rates were charged at smaller overpotentials compared to nanometer-sized counterparts formed at low rates.

Experimental and Computational Analysis of the Solvent-Dependent O2/Li(+)-O2(-) Redox Couple: Standard Potentials, Coupling Strength, and Implications for Lithium-Oxygen Batteries.

Understanding and controlling the kinetics of O2 reduction in the presence of Li(+)-containing aprotic solvents, to either Li(+)-O2(-) by one-electron reduction or Li2 O2 by two-electron reduction, is instrumental to enhance the discharge voltage and capacity of aprotic Li-O2 batteries. Standard potentials of O2 /Li(+)-O2(-) and O2/O2(-) were experimentally measured and computed using a mixed cluster-continuum model of ion solvation. Increasing combined solvation of Li(+) and O2(-) was found to lower the coupling of Li(+)-O2(-) and the difference between O2/Li(+)-O2(-) and O2/O2(-) potentials. The solvation energy of Li(+) trended with donor number (DN), and varied greater than that of O2 (-) ions, which correlated with acceptor number (AN), explaining a previously reported correlation between Li(+)-O2(-) solubility and DN. These results highlight the importance of the interplay between ion-solvent and ion-ion interactions for manipulating the energetics of intermediate species produced in aprotic metal-oxygen batteries.

Rate-Dependent Nucleation and Growth of NaO2 in Na-O2 Batteries.

Understanding the oxygen reduction reaction kinetics in the presence of Na ions and the formation mechanism of discharge product(s) is key to enhancing Na-O2 battery performance. Here we show NaO2 as the only discharge product from Na-O2 cells with carbon nanotubes in 1,2-dimethoxyethane from X-ray diffraction and Raman spectroscopy. Sodium peroxide dihydrate was not detected in the discharged electrode with up to 6000 ppm of H2O added to the electrolyte, but it was detected with ambient air exposure. In addition, we show that the sizes and distributions of NaO2 can be highly dependent on the discharge rate, and we discuss the formation mechanisms responsible for this rate dependence. Micron-sized (∼500 nm) and nanometer-scale (∼50 nm) cubes were found on the top and bottom of a carbon nanotube (CNT) carpet electrode and along CNT sidewalls at 10 mA/g, while only micron-scale cubes (∼2 µm) were found on the top and bottom of the CNT carpet at 1000 mA/g, respectively.

Chemical Instability of Dimethyl Sulfoxide in Lithium-Air Batteries.

Although dimethyl sulfoxide (DMSO) has emerged as a promising solvent for Li-air batteries, enabling reversible oxygen reduction and evolution (2Li + O2 ⇔ Li2O2), DMSO is well known to react with superoxide-like species, which are intermediates in the Li-O2 reaction, and LiOH has been detected upon discharge in addition to Li2O2. Here we show that toroidal Li2O2 particles formed upon discharge gradually convert into flake-like LiOH particles upon prolonged exposure to a DMSO-based electrolyte, and the amount of LiOH detectable increases with increasing rest time in the electrolyte. Such time-dependent electrode changes upon and after discharge are not typically monitored and can explain vastly different amounts of Li2O2 and LiOH reported in oxygen cathodes discharged in DMSO-based electrolytes. The formation of LiOH is attributable to the chemical reactivity of DMSO with Li2O2 and superoxide-like species, which is supported by our findings that commercial Li2O2 powder can decompose DMSO to DMSO2, and that the presence of KO2 accelerates both DMSO decomposition and conversion of Li2O2 into LiOH.