Recent advancements in polyurethane-based membranes for gas separation.

Gas separation membranes are critical in a variety of environmental research and industrial applications. These membranes are designed to selectively allow some gases to flow while blocking others, allowing for the separation and purification of gases for a variety of applications. Therefore, the demand for fast and energy-efficient gas separation techniques is of central interest for many chemical and energy production diligences due to the intensified levels of greenhouse and industrial gases. This encourages the researchers to innovate techniques for capturing and separating these gases, including membrane separation techniques. Polymeric membranes play a significant role in gas separations by capturing gases from the fuel combustion process, purifying chemical raw material used for plastic production, and isolating pure and noncombustible gases. Polyurethane-based membrane technology offers an excellent knack for gas separation applications and has also been considered more energy-efficient than conventional phase change separation methodologies. This review article reveals a thorough delineation of the current developments and efforts made for PU membranes. It further explains its uses for the separation of valuable gases such as carbon dioxide (CO2), hydrogen (H2), nitrogen (N2), methane (CH4), or a mixture of gases from a variety of gas spillages. Polyurethane (PU) is an excellent choice of material and a leading candidate for producing gas-separating membranes because of its outstanding chemical chemistry, good mechanical abilities, higher permeability, and variable microstructure. The presence of PU improves several characteristics of gas-separating membranes. Selectivity and separation efficiency of PU-centered membranes are enhanced through modifications such as blending with other polymers, use of nanoparticles (silica, metal oxides, alumina, zeolite), and interpenetrating polymer networks (IPNs) formation. This manuscript critically analyzes the various gas transport methods and selection criteria for the fabrication of PU membranes. It also covers the challenges facing the development of PU-membrane-based separation procedures.

Preparation, properties, and applications of gelatin-based hydrogels (GHs) in the environmental, technological, and biomedical sectors.

Gelatin's versatile functionalization offers prospects of facile and effective crosslinking as well as combining with other materials (e.g., metal nanoparticles, carbonaceous, minerals, and polymeric materials exhibiting desired functional properties) to form hybrid materials of improved thermo-mechanical, physio-chemical and biological characteristics. Gelatin-based hydrogels (GHs) and (nano)composite hydrogels possess unique functional features that make them appropriate for a wide range of environmental, technical, and biomedical applications. The properties of GHs could be balanced by optimizing the hydrogel design. The current review explores the various crosslinking techniques of GHs, their properties, composite types, and ultimately their end-use applications. GH's ability to absorb a large volume of water within the gel network via hydrogen bonding is frequently used for water retention (e.g., agricultural additives), and absorbency towards targeted chemicals from the environment (e.g., as wound dressings for absorbing exudates and in water treatment for absorbing pollutants). GH's controllable porosity makes its way to be used to restrict access to chemicals entrapped within the gel phase (e.g., cell encapsulation), regulate the release of encapsulated cargoes within the GH (e.g., drug delivery, agrochemicals release). GH's soft mechanics closely resembling biological tissues, make its use in tissue engineering to deliver suitable mechanical signals to neighboring cells. This review discussed the GHs as potential materials for the creation of biosensors, drug delivery systems, antimicrobials, modified electrodes, water adsorbents, fertilizers and packaging systems, among many others. The future research outlooks are also highlighted.

Chitosan-anthracene hydrogels as controlled stiffening networks.

In this study, we report the synthesis of single and dual-crosslinked anthracene-functional chitosan-based hydrogels in the absence of toxic initiators. Single crosslinking was achieved through dimerization of anthracene, whereas dual-crosslinked hydrogel was formed through dimerization of anthracene and free radical photopolymerization of methacrylated-chitosan in the presence of non-toxic initiator riboflavin, a well-known vitamin B2. Both single and dual-crosslinked hydrogels were found to be elastic, as was determined through rheological analysis. We observed that the dual-crosslinked hydrogels exhibited higher Young's modulus than the single-crosslinked hydrogels, where the modulus for single and dual-crosslinked hydrogels were measured as 9.2 ± 1.0 kPa and 26 ± 2.8 kPa, respectively resulting in significantly high volume of cells in dual-crosslinked hydrogel (2.2 × 107 µm3) compared to single-crosslinked (4.9 × 106 µm3). Furthermore, we investigated the cytotoxicity of both hydrogels towards 3T3-J2 fibroblast cells through CellTiter-Glo assay. Finally, immunofluorescence staining was carried out to evaluate the impact of hydrogel modulus on cell morphology. This study comprehensively presents functionalization of chitosan with anthracene, uses nontoxic initiator riboflavin, modulates the degree of crosslinking through dimerization of anthracene and free radical photopolymerization, and further modulates cell behavior through the alterations of hydrogel properties.

3D Printing of Cytocompatible Gelatin-Cellulose-Alginate Blend Hydrogels.

3D bioprinting of hydrogels has gained great attention due to its potential to manufacture intricate and customized scaffolds that provide favored conditions for cell proliferation. Nevertheless, plain natural hydrogels can be easily disintegrated, and their mechanical strengths are usually insufficient for printing process. Hence, composite hydrogels are developed for 3D printing. This study aims to develop a hydrogel ink for extrusion-based 3D printing which is entirely composed of natural polymers, gelatin, alginate, and cellulose. Physicochemical interactions between the components of the intertwined gelatin-cellulose-alginate network are studied via altering copolymer ratios. The structure of the materials and porosity are assessed using infrared spectroscopy, swelling, and degradation experiments. The utility of this approach is examined with two different crosslinking strategies using glutaraldehyde or CaCl2 . Multilayer cylindrical structures are successfully 3D printed, and their porous structure is confirmed by scanning electron microscopy and Brunauer-Emmett-Teller surface area analyses. Moreover, cytocompatibility of the hydrogel scaffolds is confirmed on fibroblast cells. The developed material is completely natural, biocompatible, economical, and the method is facile. Thus, this study is important for the development of advanced functional 3D hydrogels that have considerable potential for biomedical devices and artificial tissues.

Multifunctional alginate-based hydrogel with reversible crosslinking for controlled therapeutics delivery.

Glycan-based alginate hydrogels have great potential in creating new vehicles with responsive behavior and tunable properties for biomedicine. However, precise control and tunability in properties present major barrier for clinical translation of these materials. Here, we report the synthesis of pH responsive anthracene modified glycan-based hydrogels for selective release of therapeutic molecules. Hydrogels were crosslinked through simultaneous photopolymerization of vinyl groups and photodimerization of anthracene. Incorporation of anthracene into these gels leads to reversible control on crosslinking and transition between gel/sol states through dimerization/dedimerization of anthracene groups. Chemotherapeutic drug doxorubicin-loaded hydrogels were then tested in a cancer mimetic microenvironment where 85% of the drug was released from anthracene-conjugated hydrogels at pH 2 for 6 days. Control on gelation with anthracene incorporation was observed through alterations in modulus, where storage modulus was increased two-fold with anthracene conjugation during photopolymerization and photodimerization. Furthermore, cell survival analysis revealed that anthracene conjugation could selectively compromise cancer cell viability without inducing significant toxicity on healthy fibroblasts. This study combines light-induced control of crosslink density due to anthracene and pH-triggered therapeutics delivery with alginate. The approach would be applicable for systems where multiple control is required with high precision.