ABSTRACT
Mine tailings are the discarded materials resulting from mining processes after minerals have been extracted. They consist of leftover mineral fragments, excavated land masses, and disrupted ecosystems. The uncontrolled handling or discharge of tailings from abandoned mine lands (AMLs) poses a threat to the surrounding environment. Numerous untreated mine tailings have been abandoned globally, necessitating immediate reclamation and restoration efforts. The limited feasibility of conventional reclamation methods, such as cost and acceptability, presents challenges in reclaiming tailings around AMLs. This study focuses on phytorestoration as a sustainable method for treating mine tailings. Phytorestoration utilizes existing native plants on the mine sites while applying advanced principles of environmental biotechnology. These approaches can remediate toxic elements and simultaneously improve soil quality. The current study provides a global overview of phytorestoration methods, emphasizing the specifics of mine tailings and the research on native plant species to enhance restoration ecosystem services.
Subject(s)
Mining , Plants , Soil , Biodegradation, Environmental , Ecosystem , Soil PollutantsABSTRACT
Abandoned bauxite mine (ABM) soil generally contains an unacceptable number of heavy metals (HMs), causing several ecological and environmental issues. The present study was conducted with a similar objective to assess the HM accumulation potential of the naturally growing plant species from Pakhar ABM site. Vegetation communities were studied using quadrat methods for plant species at both ABM and the control site (near the ABM site). A total of 21 (9 at the ABM site and 12 at the control site) plant species were recorded in the present study belonging to 10 families. Vegetation study revealed that the dominant plant species were Ammophila arenaria and Lantana camara at ABM site and Lantana camara at the control site. The concentration of HMs in soil at the ABM site, were 66180.00 mg kg-1 Al, 62.20 mg kg-1 Cr, 22.60 mg kg-1 Cu, 346800.00 mg kg-1 Fe, 780.80 mg kg-1 Mn, and 39.80 mg kg-1 Zn while in the soil of site located nearby taken as the control showed 56500.00 mg kg-1 Al, 4.40 mg kg-1 Cu, 51120.00 mg kg-1 Fe, 58.20 mg kg-1 Mn, 13.00 mg kg-1 Zn. Ammophila arenaria, Miscanthus sinensis, Acacia drepanolobium and Rumex pulcher exhibited the highest metal accumulation at the ABM site, while Ocimum campechianum, Lantana camara, Panicum virgatum L., Euphorbia hirta and Holcus lanatus, Cerastium glomeratum thuill and Shorea robusta exhibited the highest metal accumulation at control site. Plant Lantana camara showed considerable TF values for Pb, Al and Fe, from the ABM soil while Shorea robusta showed high TF values for Al, Cu, Zn, and Fe from the control soil. The BAF for Cu, Mn and Zn from ABM soil were observed in Acacia drepanolobium whereas Cerastium glomeratum thuill exhibited maximum BAF values for Zn and Cu from control soil.
Subject(s)
Metals, Heavy , Soil Pollutants , Humans , Soil Pollutants/analysis , Metals, Heavy/analysis , Plants , Soil , Poaceae , India , Environmental MonitoringABSTRACT
Air pollution is one of the major global environmental issues urgently needed attention for its control through sustainable approaches. The release of air pollutants from various anthropogenic and natural processes imposes serious threats to the environment and human health. The green belt development using air pollution-tolerant plant species has become popular approach for air pollution remediation. Plants' biochemical and physiological attributes, especially relative water content, pH, ascorbic acid, and total chlorophyll content, are taken into account for assessing air pollution tolerance index (APTI). In contrast, anticipated performance index (API) is assessed based on socio-economic characteristics including "canopy structure, type, habit, laminar structure, economic value and APTI score" of plant species. Based on previous work, plants with high dust-capturing capacity are identified in Ficus benghalensis L. (0.95 to 7.58 mg/cm2), and highest overall PM accumulation capacity was observed in Ulmus pumila L. (PM10 = 72 µg/cm2 and PM2.5 = 70 µg/cm2) in the study from different regions. According to APTI, the plant species such as M. indica (11 to 29), Alstonia scholaris (L.) R. Br. (6 to 24), and F. benghalensis (17 to 26) have been widely reported as high air pollution-tolerant species and good to best performer in terms of API at different study sites. Statistically, previous studies show that ascorbic acid (R2 = 0.90) has good correlation with APTI among all the parameters. The plant species with high pollution tolerance capacity can be recommended for future plantation and green belt development.
Subject(s)
Air Pollutants , Air Pollution , Environmental Restoration and Remediation , Humans , Environmental Monitoring , Plant Leaves/chemistry , Air Pollution/analysis , Air Pollutants/analysis , Plants , Ascorbic Acid/pharmacologyABSTRACT
Soil pollution and heavy metals (HMs) contamination caused by the improper management of mine soil is a major concern for the environment and the associated living beings. The present study was carried out for 90 days with iron mine soil (MS) amendment with different ratios of garden soil (GS) (0, 25, 50, 75 and 100%). The study investigates the growth performance, metal tolerance, metal accumulation (Fe, Pb, Cu and Ni) ability of R. communis L. and the improvement in soil health after harvesting the plants. The MS had a high level of Fe, Pb, Cu and Ni (2017.17, 65.34, 34.02 and 69.15 mg kg-1 respectively) with significantly low pH, water holding capacity (WHC), organic carbon (OC), organic matter (OM) and nutrients along with microbial biomass carbon and nitrogen (Cmic and Nmic). The study found that there are higher growth rates and biomass for plants grown in all GS treatments compared to 100% MS. The relative water content (%), tolerance index and carotenoid content exhibit upwards trends with the increasing growing period. The HMs accumulation in shoot and root was found highest for Fe (1354.44 and 3989.61 mg kg-1) and Pb (31.88 and 34.83 mg kg-1). The metal extraction ratio for all studied metals was found maximum in 50 and 75% GS treatment plants. Further, the HMs removal percentage was recorded between 14.82 and 54.86%. The soil physicochemical and biological properties like electrical conductivity, total nitrogen, Cmic and Nmic increased up to 50% and the OC and OM improved manyfold in 100% MS. Based on the findings, it is concluded that R. communis L. has the potential to easily cultivate in mine abandoned soil and tolerate high concentrations of HMs.
Subject(s)
Metals, Heavy , Soil Pollutants , Soil/chemistry , Iron , Gardens , Lead , Soil Pollutants/analysis , Metals, Heavy/analysis , Carbon , RicinusABSTRACT
Soil contamination by geogenic contaminants (GCs) represents an imperative environmental problem. Various soil remediation methods have been successfully employed to ameliorate the health risks associated with GCs. Phytoremediation is considered as an eco-friendly and economical approach to revegetate GC-contaminated soils. However, it is a very slow process, as plants take a considerable amount of time to gain biomass. Also, the process is limited only to the depth and surface area of the root. Inoculation of arbuscular mycorrhizal fungi (AMF) with remediating plants has been found to accelerate the phytoremediation process by enhancing plant biomass and their metal accumulation potential while improving the soil physicochemical and biological characteristics. Progress in the field application is hindered by a lack of understanding of complex interactions between host plant and AMF that contribute to metal detoxification/(im)mobilization/accumulation/translocation. Thus, this review is an attempt to reveal the underlying mechanisms of plant-AMF interactions in phytoremediation.
ABSTRACT
The coronavirus disease 2019 (COVID-19) was declared a pandemic by the World Health Organization (WHO) on March 11, 2020. As a preventive measure, the majority of countries adopted partial or complete lockdown to fight the novel coronavirus. The lockdown was considered the most effective tool to break the spread of the coronavirus infection worldwide. Although lockdown damaged national economies, it has given a new dimension and opportunity to reduce environmental contamination, especially air pollution. In this study, we reviewed, analyzed and discussed the available recent literature and highlighted the impact of lockdown on the level of prominent air pollutants and consequent effects on air quality. The levels of air contaminants like nitrogen dioxide (NO2), sulphur dioxide (SO2), carbon monoxide (CO), and particulate matter (PM) decreased globally compared to levels in the past few decades. In many megacities of the world, the concentration of PM and NO2 declined by > 60% during the lockdown period. The air quality index (AQI) also improved substantially throughout the world during the lockdown. Overall, the air quality of many urban areas improved slightly to significantly during the lockdown period. It has been observed that COVID-19 transmission and mortality rate also decreased in correlation to reduced pollution level in many cities.
ABSTRACT
Polycyclic aromatic hydrocarbons (PAHs) are persistent toxic substances that have ubiquitous presence in water, air, soil, and sediment environments. The growth of PAH toxicities and related ecotoxicology risk in estuary sediment has a serious concern. Present study examined the PAHs concentration, sources, and ecological risk from selected sites in Subarnarekha River estuary (SRE) sediment deposits. The sum of toxic 16 PAHs was ranged from 36.8 to 670.8 ng/g (mean = 223.46 ± 196.35 ng/g). The total PAH concentration varied significantly among the sampling sites (range 511.3 ng/g to 233.8 ng/g) based on allochthonous contaminant loads. Among the 16 compounds, Phen had the highest concentration (40.18 ng/g), followed by Pye (31.86 ng/g), Flur (29.36 ng/g), and NA (19.33 ng/g). Most of the sampling sites contained abundant 3-ring and 4-5-ring PAHs. Based on diagnostic ratios and PCA analysis petroleum combustion, biomass, and coal-burning have been identified as the major sources. The PAHs had high mutagenic equivalent factor and toxic equivalent factor values posing great ecological threats and health risks.
Subject(s)
Polycyclic Aromatic Hydrocarbons , Water Pollutants, Chemical , China , Environmental Monitoring , Estuaries , Geologic Sediments , Polycyclic Aromatic Hydrocarbons/analysis , Risk Assessment , Rivers , Water Pollutants, Chemical/analysisABSTRACT
The present paper designed to understand the variations in the atmospheric pollutants viz. PM10, PM2.5, SO2, NO2, and CO during the COVID-19 pandemic over eight most polluted Indian cities (Mumbai, Delhi, Bangalore, Hyderabad, Lucknow, Chandigarh, Kolkata, and Ahmedabad). A significant reduction in the PM2.5 (63%), PM10 (56%), NO2 (50%), SO2 (9%), and CO (59%) were observed over Major Dhyan Chand Stadium. At Chhatrapati Shivaji International Airport, a decline of 44% in PM2.5 and 50% in PM10 was seen just a week during the initial phase of the lockdown. Gaseous pollutants (NO2, SO2 & CO) dropped up-to 36, 16, and 41%, respectively. The Air Quality Index (AQI) shows a dramatic change from 7% to 67% during observation at Chandigarh and Ballygunge during the inspection. Whereas, Ahmedabad, Worli, Income Tax Office, Talkatora, Lalbagh, and Ballygaunge have showed a significant change in AQI from 25.76% to 68.55%. However, Zoo Park, CST, Central School, and Victoria show relatively low variation in AQI in the range of 3.0% to 14.50% as compare to 2019 after lockdown. Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) analysis suggested that long range transportation of pollutants were also a part and parcel contributing to changes in AQI which were majorly coming from the regions of Iran, Afghanistan, Saudi Arabia, as well as a regional grant from Indian Gangatic plains and Delhi Non-capital region.
ABSTRACT
Coronavirus disease 2019 (COVID-19) has emerged as a significant public health emergency in recent times. It is a respiratory illness caused by the novel virus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which was initially reported in late December 2019. In a span of 6 months, this pandemic spread across the globe leading to high morbidity and mortality rates. Soon after the identification of the causative virus, questions concerning the impact of environmental factors on the dissemination and transmission of the virus, its persistence in environmental matrices, and infectivity potential begin to emerge. As the environmental factors could have far-reaching consequences on infection dissemination and severity, it is essential to understand the linkage between these factors and the COVID-19 outbreak. In order to improve our current understanding over this topic, the present article summarizes topical and substantial observations made regarding the influences of abiotic environmental factors such as climate, temperature, humidity, wind speed, air, and water quality, solid surfaces/interfaces, frozen food, and biotic factors like age, sex, gender, blood type, population density, behavioural characteristics, etc. on the transmission, persistence, and infectivity of this newly recognized SARS-CoV-2 virus. Further, the potential pathways of virus transmission that could pose risk to population health have been discussed, and the critical areas have been identified which merits urgent research for the assessment and management of the COVID-19 outbreak. Where possible, the knowledge gaps requiring further investigation have been highlighted.
Subject(s)
COVID-19 , SARS-CoV-2 , Humans , Humidity , Pandemics , RNA, ViralABSTRACT
Soil contamination with heavy metals (HMs) is a serious concern for the developing world due to its non-biodegradability and significant potential to damage the ecosystem and associated services. Rapid industrialization and activities such as mining, manufacturing, and construction are generating a huge quantity of toxic waste which causes environmental hazards. There are various traditional physicochemical techniques such as electro-remediation, immobilization, stabilization, and chemical reduction to clean the contaminants from the soil. However, these methods require high energy, trained manpower, and hazardous chemicals make these techniques costly and non-environment friendly. Bioremediation, which includes microorganism-based, plant-based, microorganism-plant associated, and other innovative methods, is employed to restore the contaminated soils. This review covers some new aspects and dimensions of bioremediation of heavy metal-polluted soils. The bioremediation potential of bacteria and fungi individually and in association with plants has been reviewed and critically examined. It is reported that microbes such as Pseudomonas spp., Bacillus spp., and Aspergillus spp., have high metal tolerance, and bioremediation potential up to 98% both individually and when associated with plants such as Trifolium repens, Helianthus annuus, and Vallisneria denseserrulata. The mechanism of microbe's detoxification of metals depends upon various aspects which include the internal structure, cell surface properties of microorganisms, and the surrounding environmental conditions have been covered. Further, factors affecting the bioremediation efficiency and their possible solution, along with challenges and future prospects, are also discussed.
ABSTRACT
Due to fast and deadly spread of corona virus (COVID-19), the Government of India implemented lockdown in the entire country from 25 April 2020. So, we studied the differences in the air quality index (AQI) of Delhi (DTU, Okhla and Patparganj), Haryana (Jind, Palwal and Hisar) and Uttar Pradesh (Agra, Kanpur and Greater Noida) from 17 February 2020 to 4 May 2020. The AQI was calculated by combination of individual sub-indices of seven pollutants, namely PM2.5, PM10, NO2, NH3, SO2, CO and O3, collected from the Central Pollution Control Board website. The AQI has improved by up to 30-46.67% after lockdown. The AQI slope values - 1.87, - 1.70 and - 1.35 were reported for Delhi, - 1.11, - 1.31 and - 1.04 were observed for Haryana and - 1.48, - 1.79 and - 1.78 were found for Uttar Pradesh (UP), which may be attributed to limited access of transportation and industrial facilities due to lockdown. The ozone (O3) concentration was high at Delhi because of lesser greenery as compared to UP and Haryana, which provides higher atmospheric temperature favourable for O3 formation. The air mass back trajectory (AMBT) analysis reveals the contribution of air mass from Europe, Africa and Gulf countries as well as local emissions from Indo-Gangetic Plain, Madhya Pradesh and Maharashtra states of India.
ABSTRACT
Coronaviruses are the well-known cause of severe respiratory, enteric and systemic infections in a wide range of animal hosts including man. The scientific interest on coronaviruses has increased since the outbreak of COVID-19 (SARS-CoV-2) that initiated in Wuhan, China. This was soon declared a 'Public Health Emergency of International Concern' by World Health Organisation (WHO). Presently, the best strategy against this pandemic is prevention through regular hand and face washes, use of masks, gloves and personal protective equipment and social distancing. At the government level, the task is to perform as many tests as possible to identify coronavirus infected people and to isolate them to avoid the uncontrollable spread of the virus. The ongoing and future strategies against coronavirus ensue that huge quantity of masks, plastic products (personal protective equipment (PPE) kits, face shields, etc.) and chemicals (chloroxylenol, chlorine, H2O2, etc.) would be generated as waste in near future. Further, the amount of water consumption per person shall also increase. These effects can have unforeseen impacts on the environment. Apart from this, the ecological impacts on human-animal interactions can also be seen, such as people avoiding pets in coming future as a health and safety measure. The present review gives an overview of coronavirus, its current state of spread and environmental and ecological risks ensuing from the pandemic.
ABSTRACT
In December 2019, the outbreak of viral disease labeled as Novel Coronavirus started in Wuhan, China, which later came to be known as Covid-19. The disease has spread in almost every part of the world and has been declared a global pandemic in March 2020 by World Health Organization (WHO). The corona virus outbreak has emerged as one of the deadliest pandemics of all time in human history. The ongoing pandemic of COVID-19 has forced several countries of the world to observe complete lockdown forcing people to live in their homes. India also faced the phase of total lockdown for 21 days (in first phase) to avoid the spread of coronavirus to the maximum possible extent. This lockdown impacted the pollution levels of environment and improved air and water quality in the short span owing to very less human activities. The present work scientifically analyzed the available data for primary air pollutants (PM2.5, NO2, SO2 and CO) from two major Indian cities, Lucknow and New Delhi. The analysis was based on air quality data for before lockdown and after lockdown (first phase of 21 days) periods of 21 days each. The results showed significant decline in the studied air pollution indices and demonstrated improvement of air quality in both the cities. The major impact was seen in the levels of PM2.5, NO2 and CO. The levels of SO2 showed less significant decline during the lockdown period. The results are presented with future perspectives to mitigate air pollution in near future by adopting the short and periodical lockdown as a tool.
Subject(s)
Air Pollutants/analysis , Communicable Disease Control/statistics & numerical data , Coronavirus Infections/prevention & control , Environmental Monitoring , Pandemics/prevention & control , Pneumonia, Viral/prevention & control , COVID-19 , Cities/statistics & numerical data , Human Activities/statistics & numerical data , Humans , India , Particulate Matter/analysisABSTRACT
Heavy metal pollution of soil is a global environmental problem and therefore its remediation is of paramount importance. Cadmium (Cd) is a potential toxicant to living organisms and even at very low concentrations. This study was aimed to assess the effectiveness of Ricinus communis for remediation of Cd contaminated soils. For this, growth and biomass of R. communis and Cd accumulation, translocation and partitioning in different plant parts were investigated after 8 months of plant growth in Cd contaminated soil (17.50 mg Cd kg−1 soil). Eight months old plants stabilized 51 % Cd in its roots and rest of the metal was transferred to the stem and leaves. There were no significant differences in growth, biomass and yield between control and Cd treated plants, except fresh weight of shoots. The seed yield per plant was reduced only by 5 % of Cd contaminated plants than control. The amount of Cd translocated to the castor seeds was nominal i.e. 0.007 µg Cd g−1 seeds. The bioconcentration factor reduced significantly in shoots and seeds in comparison to roots. The data indicates that R. communis is highly tolerant to Cd contamination and can be used for remediation of heavy metal polluted sites.
Subject(s)
Cadmium/metabolism , Crops, Agricultural/metabolism , Ricinus/metabolism , Soil Pollutants/metabolism , Biodegradation, Environmental , Biomass , Cadmium/analysis , Plant Leaves/metabolism , Plant Roots/metabolism , Plant Stems/metabolism , Ricinus/growth & development , Seeds/metabolism , Soil/chemistry , Soil Pollutants/analysisABSTRACT
A rapid bioassay test was conducted to study heavy metal accumulation and biochemical changes in Trigonella foenumgracum (methi) irrigated with 25, 50, 75 and 100% of effluent from flash light manufacturing industry at 60 days after sowing. Total metal concentration in effluent samples was: Cr = 0.12 < Cd = 0.18 < Pb = 0.24 < Cu = 2.68 mg l(-1) whereas, metals were not detected in control. An increase in photosynthetic pigments of exposed plant was noticed up to 50% concentrations of the effluent followed by a decrease at higher concentration as compared to their respective control.An enhanced lipid peroxidation in the treated plants was observed, which was evident by increased level of antioxidants: proline, cysteine, malondialdehyde and ascorbic acid content. The treated plants accumulated metals in the following order: Cu > Pb > Cr > Cd in the roots and shoots.
Subject(s)
Biological Assay , Toxicity Tests/methods , Trigonella/drug effects , Waste Disposal, Fluid/methods , Industrial Waste , Metals/chemistry , Metals/toxicity , Plant Leaves/drug effectsABSTRACT
Field experiments were conducted during two consequent years in semi-arid, subtropical climate of Rohtak district situated in North-West Indian state Haryana to evaluate the effects of eco-friendly organic matrix entrapped urea (OMEU) on wheat (Triticum aestivum L. cv. WH-711). The OMEU prepared in granular form contained cow dung, rice bran (grain cover of Oryza sativa), neem (Azadirachta indica) leaves and clay soil (diameter of particles < 0.002 mm) in 1:1:1:1 ratios and saresh (plant gum of Acacia sp.) as binder entrapping half of the recommended dose of urea. A basal application of organic matrix entrapped urea showed increase in plant growth in terms of fresh and dry weights, root length, root number, leaf number, tillers, plant height earlet number, earlet length and productivity in terms of grain yield and straw yield over free form of urea (FU) and no fertilizer (NF) application. The OMEU increased total soluble proteins, organic N and free ammonium content in the leaves at 45 and 60 days. The nutritional status of wheat grains in OMEU applied plants was almost similar to that observed for FU applied plants. An increase in organic carbon and available phosphorus (P) was observed in OMEU applied plots on harvest whereas pH was slightly decreased over FU applied plots. The microbial population and activity in terms of fungal and bacterial colony count and activities soil dehydrogenase and alkaline phosphatase were significantly higher in OMEU applied plots as compared to the FU applied plots. Our data indicate that OMEU which are low cost, biodegradable and non-toxic can be used to replace the expensive chemical fertilizers for wheat cultivation in semi-arid, subtropical climate.
Subject(s)
Soil/chemistry , Triticum/growth & development , Triticum/physiology , Urea/chemistry , Urea/pharmacology , Fertilizers/analysis , India , Organic Chemicals/chemistry , Quaternary Ammonium Compounds/chemistry , WaterABSTRACT
We have previously reported that Ricinus communis (castor) is more tolerant to soil cadmium (Cd) and more efficient for Cd phytoremediation than Brassica juncea (Indian mustard) (Bauddh and Singh, 2012). In the present study, R. communis was found more tolerant to salinity and drought in presence of Cd and removed more Cd in a given time than Indian mustard. R. communis produced 23 and twelve folds higher biomass in terms of fresh weight and dry weight, respectively than that in B. juncea during three months when grown in Cd contaminated soil in presence of 100mM NaCl salinity and ten day water withdrawal based drought at 90 day after sowing (DAS). Castor plants showed stronger self-protection ability in form of proline bioaccumulation (r(2)=0.949) than Indian mustard (r(2)=0.932), whereas a lower r(2) for malondialdehyde (MDA) and total soluble protein in R. communis (r(2)=0.914 and r(2)=0.915, respectively) than that of B. juncea (r(2)=0.947 and r(2)=0.927, respectively) indicated a greater damage to cell membrane in Indian mustard during the multiple stress conditions. Though, the amount of Cd accumulated in the roots and shoots of Indian mustard was higher as per unit biomass than that in castor, total removal of the metal from soil was much higher in castor on per plant basis in the same period in presence of the stresses. R. communis accumulated about seventeen and 1.5 fold higher Cd in their roots and shoots, respectively than that of B. juncea in 90 DAS under the multiple stresses. Salinity alone enhanced Cd uptake, whereas drought stress reduced its uptake in both the plants.
Subject(s)
Cadmium/metabolism , Droughts , Mustard Plant/metabolism , Ricinus communis/metabolism , Salinity , Soil Pollutants/metabolism , Biodegradation, Environmental , Biomass , Ricinus communis/drug effects , Ricinus communis/growth & development , Malondialdehyde/analysis , Mustard Plant/drug effects , Mustard Plant/growth & development , Plant Proteins/analysis , Plant Roots/growth & development , Plant Roots/metabolism , Plant Shoots/growth & development , Plant Shoots/metabolism , Proline/analysis , Sodium Chloride/pharmacology , Soil/chemistryABSTRACT
The effect of increasing level of cadmium in soil was investigated on biomass production, antioxidants, Cd bioaccumulation and translocation in Ricinus communis vis-à-vis a commonly studied oil crop Brassica juncea. The plants were exposed to 25, 50, 75, 100, and 150 mg Cd/Kg soil for up to 60 days. It was found that R. communis produced higher biomass at all the contamination levels than that of B. juncea. Proline and malondialdehyde in the leaves increased with increase in Cd level in both the species, whereas soluble protein decreased. The bioaccumulation of Cd was higher in B. juncea on the basis of the per unit biomass, total metal accumulation per plant was higher in R. communis. The translocation of Cdfrom roots to shoot was also higher in B. juncea at all Cd concentrations. R. communis appeared more tolerant and capable to clean Cd contaminated soil for longer period in one sowing than B. juncea and the former can grow in wasteland soil also in which later cannot be cultivated.
Subject(s)
Biodegradation, Environmental , Cadmium/toxicity , Mustard Plant/drug effects , Ricinus/drug effects , Soil Pollutants/toxicity , Biomass , Cadmium/chemistry , Gene Expression Regulation, Plant/drug effects , Lipid Peroxidation/drug effects , Mustard Plant/chemistry , Mustard Plant/growth & development , Mustard Plant/metabolism , Plant Oils/metabolism , Plant Proteins/metabolism , Plant Roots/drug effects , Plant Roots/growth & development , Plant Shoots/drug effects , Plant Shoots/growth & development , Proline , Ricinus/chemistry , Ricinus/growth & development , Ricinus/metabolism , Soil/chemistry , Soil Pollutants/chemistry , Time FactorsABSTRACT
Phytoremediation is an emerging, ecofriendly and economically feasible technique for the restoration of heavy metals contaminated environment. In the present investigation, five native macrophytes growing naturally in a drain receiving tannery effluent viz Bacopa monnieri, Eichhornia crassipes, Hydrilla verticillata, Ipomoea aquatica and Marsilea minuta were evaluated for their heavy metal (Cr, Cu, Ni and Pb) accumulation potential in field conditions at Unnao, U.P., India. The results showed that metal accumulation by these macrophytes differed among species and tissue parts. The concentration of Cr, Cu, Ni and Pb in the root tissues were estimated in the range 3.38-45.59,1.01-16.85,1.81-4.43 and 1.02-4.24 microg g(-1) d.wt., whereas the corresponding shoot values were 8.79-48.81, 1.01-8.67, 0.84-2.89 and 1.02-2.84 for Cr, Cu, Ni and Pb respectively. Among the studied plants the translocation factor (TF) ranged between 1.07-2.60, 0.75-3.83, 1.44-2.57 and 0.49-3.76 for Cr, Cu, Ni and Pb, respectively. The highest metal TF was found in M. minuta (2.60, 3.83 and 2.57) for Cr, Cu and Ni respectively, whereas Pb was best translocated (3.76) by B. monnieri. Roots and shoots of the studied macrophytes showed a value of greater than 1 for metal enrichment coefficient. Findings suggest that E. crassipes can be used for phytoremediation of Cu and Ni whereas M. minuta and H. verticillata can be applied for the removal of Cr and Pb respectively from the contaminated water bodies.
Subject(s)
Biodegradation, Environmental , Magnoliopsida/metabolism , Metals, Heavy/pharmacokinetics , Wastewater/chemistry , Water Pollutants, Chemical/pharmacokinetics , Bacopa/metabolism , Eichhornia/metabolism , Hydrocharitaceae/metabolism , India , Industrial Waste , Ipomoea/metabolism , Metals, Heavy/analysis , Plant Roots , Plant Shoots , Species Specificity , Water Pollutants, Chemical/analysisABSTRACT
Cadmium application inhibited various growth and biochemical parameters in seedlings of five cultivars of Brassicajuncia L. with different magnitude at lower Cd supply, however, at higher metal applications the variation in Cd toxicity ranged with minor differences. The seedling vigour index (SVI) was inhibited more severely in Gangotri (62.25% over control) and least in Pusa Jai Kisan (8.95%) at 1.0 mM CdCI2. The SVI of all five mustard cultivars, however, severely inhibited (84.29-91.80%) at 5.0 mM Cd. The root and shoot elongation in 7 days old seedlings were inhibited by 32.39-40.38 and 11.83-56.40% respectively at 1.0 mM CdCI2. whereas the varietal differences in root and shoot elongation were 76.71-82.47 and 71.57-78.91 respectively at 5.0 mM CdCI2 The genotypic differences at lower Cd level were more pronounced in shoot elongation than that in the root elongation. The dry weight and moisture content of the seedlings, however, does notshow much varietal differences even at lower Cd level, though the Cd toxicity increased at higher level of Cd application. The metal tolerance index (MTI) and % phytotoxicity of 3 days old seedlings ranged between 43.30-98.37 and 1.63-56.70% respectively at 1.0 mM CdCI2 for different mustard genotypes, whereas at 5.0 mM CdCI2 these factors ranged between 12.26-20.92 and 80.08-87.74% respectively. The varietal differences of MTI and % phytotoxicity was, however, less pronounced at all the metal levels when the seedling attained an age of 7 days. Asimilar trend of genotypic variation was noticed in Cd accumulation in the seedlings at lower and higher levels of Cd supply to the seedlings.Amongst some biochemical parameters e.g. photosynthetic pigments, carbohydrates and proteins in the leaves, the photosynthetic pigments i.e. chlorophylls and carotenoids were decreased more drastically. The carbohydrate content of leaves, however, was the least affected component. Our data indicate that the differential toxicity of cadmium to Indian mustard genotypes was dependent on the level of contamination and growth phases.