Continuous stationary phase gradient preparation on planar chromatographic media using vapor phase deposition of silane.

A new, versatile, and straightforward vapor phase deposition (VPD) approach was used to prepare continuous stationary phase gradients (cSPGs) on silica thin-layer chromatography (TLC) plates using phenyldimethylchlorosilane (PDCS) as a precursor. A mixture of paraffin oil and PDCS was placed at the bottom of an open-ended rectangular chamber, allowing the reactive silanes to evaporate and freely diffuse under a controlled atmosphere. As the volatile silane diffused across the length of the TLC plate, it reacted with the surface silanol groups thus functionalizing the surface in a gradient fashion. Characterization of the gradient TLC plates was done through UV visualization and diffuse reflectance spectroscopy (DRS). Visualizing the fluorescent gradient plates under UV radiation shows the clear presence of a gradient with the side closest to the vapor source undergoing the most modification. More quantitative characterization of the shape of the gradient was provided by DRS. The DRS showed that the degree of modification and shape of the gradient was dependent on the concentration of silane, VPD time, and relative humidity. To evaluate the chromatographic performance, a mixture of three aromatic compounds (acetaminophen (A), aspirin (As), and 3-hydroxy-2-naphthoic acid (3H)) was spotted on the high (GHP) and low phenyl (GLP) ends of the gradient TLC plates and the results compared to the separations carried out on unmodified and uniformly modified plates. The GHP TLC plates showed retention factors (Rf) of 0.060 ± 0.006, 0.391 ± 0.006, and 0.544 ± 0.006, whereas the unmodified plate displayed Rf values of 0.059 ± 0.006, 0.092 ± 0.003, and 0.037 ± 0.002 for the analytes A, As, and 3H, respectively. From the Rf values, it was observed that each modified plate exhibited different selectivity for the analytes. The GHP TLC plates exhibited better separation performance, and improved resolution compared to the GLP, unmodified, and uniformly modified plates. Overall, VPD is a new, cost-effective method for creating a gradient on the stationary phase which has the potential to advance chromatographic separation capabilities.

Preparation and characterization of stationary phase gradients on C8 liquid chromatography columns.

Continuous C8 stationary phase gradients are created on commercial Waters Symmetry Shield RP8 columns by strategically cleaving the C8 moieties in a time-dependent fashion. The method relies on the controlled infusion of a trifluoroacetic acid/water/acetonitrile solution through the column to cleave the organic functionality (e.g., C8) from the siloxane framework. The bond cleavage solution is reactive enough to cleave the functional groups, even with polar groups embedded within the stationary phase to protect the silica. Both the longitudinal and radial heterogeneity were evaluated by extruding the silica powder into polyethylene tubing and evaluating the percent carbon content in the different sections using thermogravimetric analysis (TGA). TGA analysis shows the presence of a stationary phase gradient in the longitudinal direction but not in the radial direction. Two different gradient profiles were formed with good reproducibility by modifying the infusion method: one exhibited an 'S'-shaped gradient while the other exhibited a steep exponential-like gradient. The gradients were characterized chromatographically using test mixtures, and the results showed varied retention characteristics and an enhanced ability to resolve nicotine analytes.

Use graphene coated silica core shell particles to provide rapid, precise, and equivalent chemical composition distribution analysis for polyolefin materials by high temperature thermal gradient interaction chromatography.

High temperature thermal gradient interaction chromatography (HT-TGIC) has been widely used to measure chemical composition distribution due to its applicability to separate crystalline and non-crystalline amorphous polyolefin materials. The compatibility of HT-TGIC with various detectors (infrared (IR), light scattering (LS), and viscometer) has also allowed a comprehensive analysis of molecular architecture of polyolefin and recycled plastics. The introduction of an easy-to-fabricate graphene coated onto non-porous silica particles as HT-TGIC column in 2020 showed a superior chromatographic performance over the traditional graphite column. A reduction in peak broadness (∼47 %) under identical experimental conditions was demonstrated in that research. This paper similarly uses a graphene column but with the focus on optimization of experimental parameters (concentration, and thermal cooling and heating rates etc.). Equivalent chemical composition distribution (CCD) data to that obtained by the incumbent graphite column over a wide range of polyolefins products was achieved, in addition to a shortened analysis time from 120 min down to 88 min per sample. The materials studied included semicrystalline linear low-density polyethylene (LLDPE), elastomers, terpolymers, model blends to mimic recycled plastics. The results also suggest that the elimination of substrate pores enable a better HT-TGIC separation. Coupling the ease and reproducibility of the graphene column fabrication process enables long term chromatographic robustness. This not only results in equivalent CCD data compared to the traditional graphite column but also a 27 % reduction in analysis time. These results demonstrate a substantial advancement of technology in the high throughput industrial laboratory setting where fast testing turnaround time is critical. In addition, simple fabrication with commercially available silica particles and graphene nanopowder provides a cost-effective approach to make HT-TGIC columns reproducibly.