Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 71
Filter
Add more filters










Publication year range
1.
Sci Rep ; 14(1): 10988, 2024 May 14.
Article in English | MEDLINE | ID: mdl-38744852

ABSTRACT

Investigating biodegradable and biocompatible materials for electronic applications can lead to tangible outcomes such as developing green-electronic devices and reducing the amount of e-waste. The proposed emulsion-based conducting ink formulation takes into consideration circular economy and green principles throughout the entire process, from the selection of materials to the production process. The ink is formulated using the biopolymer polylactic acid dissolved in a sustainable solvent mixed with water, along with conductive carbon nanotubes (CNTs) and silver flakes as fillers. Hybrid conductive fillers can lower the percolation threshold of the ink and the production costs, while maintaining excellent electrical properties. The coating formed after the deposition of the ink, undergoes isothermal treatment at different temperatures and durations to improve its adhesion and electrical properties. The coating's performance was evaluated by creating an eight-finger interdigitated sensor using a Voltera PCB printer. The sensor demonstrates exceptional performance when exposed to various loading and unloading pressures within the 0.2-500.0 kPa range. The results show a consistent correlation between the change in electrical resistance and the stress caused by the applied load. The ink is biodegradable in marine environments, which helps avoiding its accumulation in the ecosystem over time.

2.
Toxics ; 11(11)2023 Nov 17.
Article in English | MEDLINE | ID: mdl-37999590

ABSTRACT

In light of the global health crisis triggered by the COVID-19 pandemic, numerous experts have deemed the utilization of hand sanitizers imperative as a precautionary measure against the virus. Consequently, the demand for hand sanitizers has experienced a substantial surge. Since the beginning of 2020, the utilization of alcohol-free hand sanitizers has been increasingly favored due to the potential risks associated with alcohol poisoning, flammability, as well as the adverse effects on skin lipid dissolution, dehydration, and sebum reduction, which can lead to severe cases of eczema and norovirus infections. In this study, we developed an aqueous hand sanitizer that does not contain alcohol. The sanitizer consists of naturally occurring, food-grade organic acids, including lactic, citric, and azelaic acids. Additionally, food-grade ammonium sulfate and a small amount of povidone-iodine (PVPI) were included in the formulation to create a synergistic and potent antibacterial effect. The effectiveness of the hand sanitizer was evaluated against four common foodborne pathogens, namely Clostridium botulinum, Escherichia coli, Listeria monocytogenes, and Staphylococcus aureus, via in vitro testing. The organic acids exhibited a synergistic inhibitory function, resulting in a 3-log reduction in CFU/mL. Furthermore, the presence of povidone-iodine and ammonium sulfate enhanced their antibacterial effect, leading to a 4-log reduction in CFU/mL. The hand sanitizer solution remained stable even after 60 days of storage. During this period, the detection of additional triiodide (I3-) ions occurred, which have the ability to release broad-spectrum molecular iodine upon penetrating the cell walls. This alcohol-free hand sanitizer may offer extended protection and is anticipated to be gentle on the skin. This is attributed to the presence of citric and lactic acids, which possess cosmetic properties that soften and smoothen the skin, along with antioxidant properties.

3.
Pharmaceutics ; 15(7)2023 Jul 03.
Article in English | MEDLINE | ID: mdl-37514062

ABSTRACT

Bacterial infections are a constant challenge in the management of acute and chronic wounds. Chronic wounds, such as diabetic foot ulcers, have increased significantly in the last few years due to the rise of an aging population. A better understanding of the infectious pathophysiological mechanisms is urgently needed along with new options for the treatment of wound infections and wound-healing disorders. New advances in the preparation of biocompatible dressing materials that can be loaded with antimicrobial drugs may improve the topical treatment of infected wounds. In this study, we investigated the antimicrobial activity of polyvinylpyrrolidone (PVP) foils loaded with ciprofloxacin (Cipro-foils) in the presence of acetic acid as a co-solvent. We used ex vivo human wounds that were infected with two bacterial strains: methicillin-resistant Staphylococcus aureus (MRSA) or Pseudomonas aeruginosa (PAO1). The effectiveness of the treatment was demonstrated by the quantification of the living bacteria extracted from the wound and the detection of released immunological mediators in skin extracts and in the skin culture media. We found that Cipro-foils effectively treated the infection with both PAO1 and MRSA. Other than PAO1, MRSA had no lytic activity toward skin proteins. MRSA infections increased cytokines' expression and release. Interestingly, treatment with Cipro-foils could partially counteract these effects.

4.
Pharmaceutics ; 15(5)2023 Apr 28.
Article in English | MEDLINE | ID: mdl-37242606

ABSTRACT

Polysaccharides are naturally occurring complex molecules with exceptional physicochemical properties and bioactivities. They originate from plant, animal, and microbial-based resources and processes and can be chemically modified. The biocompatibility and biodegradability of polysaccharides enable their increased use in nanoscale synthesis and engineering for drug encapsulation and release. This review focuses on sustained drug release studies from nanoscale polysaccharides in the fields of nanotechnology and biomedical sciences. Particular emphasis is placed on drug release kinetics and relevant mathematical models. An effective release model can be used to envision the behavior of specific nanoscale polysaccharide matrices and reduce impending experimental trial and error, saving time and resources. A robust model can also assist in translating from in vitro to in vivo experiments. The main aim of this review is to demonstrate that any study that establishes sustained release from nanoscale polysaccharide matrices should be accompanied by a detailed analysis of drug release kinetics by modeling since sustained release from polysaccharides not only involves diffusion and degradation but also surface erosion, complicated swelling dynamics, crosslinking, and drug-polymer interactions. As such, in the first part, we discuss the classification and role of polysaccharides in various applications and later elaborate on the specific pharmaceutical processes of polysaccharides in ionic gelling, stabilization, cross-linking, grafting, and encapsulation of drugs. We also document several drug release models applied to nanoscale hydrogels, nanofibers, and nanoparticles of polysaccharides and conclude that, at times, more than one model can accurately describe the sustained release profiles, indicating the existence of release mechanisms running in parallel. Finally, we conclude with the future opportunities and advanced applications of nanoengineered polysaccharides and their theranostic aptitudes for future clinical applications.

5.
Micromachines (Basel) ; 13(12)2022 Nov 23.
Article in English | MEDLINE | ID: mdl-36557349

ABSTRACT

Commonly encountered problems in the manipulation of objects with robotic hands are the contact force control and the setting of approaching motion. Microelectromechanical systems (MEMS) sensors on robots offer several solutions to these problems along with new capabilities. In this review, we analyze tactile, force and/or pressure sensors produced by MEMS technologies including off-the-shelf products such as MEMS barometric sensors. Alone or in conjunction with other sensors, MEMS platforms are considered very promising for robots to detect the contact forces, slippage and the distance to the objects for effective dexterous manipulation. We briefly reviewed several sensing mechanisms and principles, such as capacitive, resistive, piezoresistive and triboelectric, combined with new flexible materials technologies including polymers processing and MEMS-embedded textiles for flexible and snake robots. We demonstrated that without taking up extra space and at the same time remaining lightweight, several MEMS sensors can be integrated into robotic hands to simulate human fingers, gripping, hardness and stiffness sensations. MEMS have high potential of enabling new generation microactuators, microsensors, micro miniature motion-systems (e.g., microrobots) that will be indispensable for health, security, safety and environmental protection.

6.
Molecules ; 27(14)2022 Jul 14.
Article in English | MEDLINE | ID: mdl-35889381

ABSTRACT

The first bioprocess that occurs in response to wounding is the deterrence of local hemorrhage. This is accomplished by platelet aggregation and initiation of the hemostasis cascade. The resulting blood clot immediately enables the cessation of bleeding and then functions as a provisional matrix for wound healing, which begins a few days after injury. Here, fibrinogen and fibrin fibers are the key players, because they literally serve as scaffolds for tissue regeneration and promote the migration of cells, as well as the ingrowth of tissues. Fibrin is also an important modulator of healing and a host defense system against microbes that effectively maintains incoming leukocytes and acts as reservoir for growth factors. This review presents recent advances in the understanding and applications of fibrin and fibrin-fiber-incorporated biomedical materials applied to wound healing and subsequent tissue repair. It also discusses how fibrin-based materials function through several wound healing stages including physical barrier formation, the entrapment of bacteria, drug and cell delivery, and eventual degradation. Pure fibrin is not mechanically strong and stable enough to act as a singular wound repair material. To alleviate this problem, this paper will demonstrate recent advances in the modification of fibrin with next-generation materials exhibiting enhanced stability and medical efficacy, along with a detailed look at the mechanical properties of fibrin and fibrin-laden materials. Specifically, fibrin-based nanocomposites and their role in wound repair, sustained drug release, cell delivery to wound sites, skin reconstruction, and biomedical applications of drug-loaded fibrin-based materials will be demonstrated and discussed.


Subject(s)
Fibrin , Wound Healing , Fibrinogen , Hemostasis , Skin/metabolism
7.
Polymers (Basel) ; 14(6)2022 Mar 16.
Article in English | MEDLINE | ID: mdl-35335530

ABSTRACT

Waterborne polyurethane dispersions can be designed to generate highly functional and environmentally friendly polymer systems. The use of water as the main dispersion medium is very advantageous for the environment and the introduction of linear and aliphatic polyols such as polyether and polyesters in the formulations can make them highly biocompatible and susceptible to biodegradation. In this study, we fabricated biodegradable, flexible and transparent plastic films by hybridizing a waterborne aliphatic polyester polyurethane (PU) suspension with polyvinylpyrrolidone (PVP) using mechanical homogenization in water. Films were cast containing different concentrations of PVP. The hybrids containing 50 wt.% PVP (PU/PVP_50/50) were hydrophobic, stretchable, highly transparent and ductile beyond 100% strain compared to highly brittle PVP. The mechanical properties of the PU/PVP_50/50 film remained stable after repeated immersion wet-dry cycles, each lasting 2 days, and the dried films recovered their mechanical properties after each cycle. Based on a 28-day biochemical oxygen demand (BOD) test, the hybrid PU/PVP_50/50 film underwent extensive biodegradation. This simple but effective process can be very suitable in producing biodegradable ductile films with very good transparency that can serve a number of applications such as agricultural mulches, food and pharmaceutical packaging and biomedical field.

8.
Biotechnol Adv ; 54: 107785, 2022.
Article in English | MEDLINE | ID: mdl-34111517

ABSTRACT

The concept of 4D printing of phase change materials is gaining attention in the potential development of self-healing materials for tissue engineering and manufacturing applications, but there has been limited utilization of the technology in agriculture/farm-based applications. The temperature-responsiveness, magneto-responsiveness, pH-responsiveness, and osmotic pressure-responsiveness of shape-memory materials have potential applications in green/compostable plastics for agricultural applications such as food packaging and mulching films, shade nets, and greenhouse polymer covers. The application of 4D printing in augmenting the biodegradability, environmental, economic, and production benefits of polymers in agriculture is the main focus of this review. So far,; little scholarly and industry attention have been directed to agricultural applications even though shape memory polymers are ideal for such applications compared to existing materials due to smart/intelligent behavior, optimized performance through fiber/nanomaterial reinforcement and multilayered composites. The practical constraints relate to the newness of the 4D printing process, customized synthetic routes for application-specific materials. The constraints can be resolved using novel and customized processes such as fused deposition modeling (FDM) and stereo-lithography and ink-jet printing, which are facile, scalable and affordable 4D printing techniques, that are highly effective compared to powder bed printing, and other droplet-based printing technologies, and photo-polymerization methods. FDM has led to the generation of PLA and other polymers with self-deformation and controllable shape memory effects. Future applications should overcome constraints linked to machine workload limitations and 3D/4D printing constraints.


Subject(s)
Plastics , Printing, Three-Dimensional , Agriculture , Polymers , Tissue Engineering/methods
9.
Biomedicines ; 9(11)2021 Nov 04.
Article in English | MEDLINE | ID: mdl-34829843

ABSTRACT

Polymer nanofibers have exceptionally high surface area. This is advantageous compared to bulk polymeric structures, as nanofibrils increase the area over which materials can be transported into and out of a system, via diffusion and active transport. On the other hand, since hydrogels possess a degree of flexibility very similar to natural tissue, due to their significant water content, hydrogels made from natural or biodegradable macromolecular systems can even be injectable into the human body. Due to unique interactions with water, hydrogel transport properties can be easily modified and tailored. As a result, combining nanofibers with hydrogels would truly advance biomedical applications of hydrogels, particularly in the area of sustained drug delivery. In fact, certain nanofiber networks can be transformed into hydrogels directly without the need for a hydrogel enclosure. This review discusses recent advances in the fabrication and application of biomedical nanofiber hydrogels with a strong emphasis on drug release. Most of the drug release studies and recent advances have so far focused on self-gelling nanofiber systems made from peptides or other natural proteins loaded with cancer drugs. Secondly, polysaccharide nanofiber hydrogels are being investigated, and thirdly, electrospun biodegradable polymer networks embedded in polysaccharide-based hydrogels are becoming increasingly popular. This review shows that a major outcome from these works is that nanofiber hydrogels can maintain drug release rates exceeding a few days, even extending into months, which is an extremely difficult task to achieve without the nanofiber texture. This review also demonstrates that some publications still lack careful rheological studies on nanofiber hydrogels; however, rheological properties of hydrogels can influence cell function, mechano-transduction, and cellular interactions such as growth, migration, adhesion, proliferation, differentiation, and morphology. Nanofiber hydrogel rheology becomes even more critical for 3D or 4D printable systems that should maintain sustained drug delivery rates.

10.
Polymers (Basel) ; 13(15)2021 Jul 27.
Article in English | MEDLINE | ID: mdl-34372069

ABSTRACT

Advances in technology have led to the production of sustainable antioxidants and natural monomers for food packaging and targeted drug delivery applications. Of particular importance is the synthesis of lignin polymers, and graft polymers, dopamine, and polydopamine, inulin, quercetin, limonene, and vitamins, due to their free radical scavenging ability, chemical potency, ideal functional groups for polymerization, abundance in the natural environment, ease of production, and activation of biological mechanisms such as the inhibition of the cellular activation of various signaling pathways, including NF-κB and MAPK. The radical oxygen species are responsible for oxidative damage and increased susceptibility to cancer, cardiovascular, degenerative musculoskeletal, and neurodegenerative conditions and diabetes; such biological mechanisms are inhibited by both synthetic and naturally occurring antioxidants. The orientation of macromolecules in the presence of the plasticizing agent increases the suitability of quercetin in food packaging, while the commercial viability of terpenes in the replacement of existing non-renewable polymers is reinforced by the recyclability of the precursors (thyme, cannabis, and lemon, orange, mandarin) and marginal ecological effect and antioxidant properties. Emerging antioxidant nanoparticle polymers have a broad range of applications in tumor-targeted drug delivery, food fortification, biodegradation of synthetic polymers, and antimicrobial treatment and corrosion inhibition. The aim of the review is to present state-of-the-art polymers with intrinsic antioxidant properties, including synthesis scavenging activity, potential applications, and future directions. This review is distinct from other works given that it integrates different advances in antioxidant polymer synthesis and applications such as inulin, quercetin polymers, their conjugates, antioxidant-graft-polysaccharides, and polymerization vitamins and essential oils. One of the most comprehensive reviews of antioxidant polymers was published by Cirillo and Iemma in 2012. Since then, significant progress has been made in improving the synthesis, techniques, properties, and applications. The review builds upon existing research by presenting new findings that were excluded from previous reviews.

11.
Polymers (Basel) ; 12(9)2020 Sep 03.
Article in English | MEDLINE | ID: mdl-32899256

ABSTRACT

Applications of cyanoacrylate monomers are generally limited to adhesives/glues (instant or superglues) and forensic sciences. They tend to polymerize rapidly into rigid structures when exposed to trace amounts of moisture. Transforming cyanoacrylate monomers into transparent polymeric films or coatings can open up several new applications, as they are biocompatible, biodegradable and have surgical uses. Like other acrylics, cyanoacrylate polymers are glassy and rigid. To circumvent this, we prepared transparent cyanoacrylate films by solvent casting from a readily biodegrade solvent, cyclopentanone. To improve the ductility of the films, poly(propylene carbonate) (PPC) biopolymer was used as an additive (maximum 5 wt.%) while maintaining transparency. Additionally, ductile films were functionalized with caffeic acid (maximum 2 wt.%), with no loss of transparency while establishing highly effective double functionality, i.e., antioxidant effect and effective UV-absorbing capability. Less than 25 mg antioxidant caffeic acid release per gram film was achieved within a 24-h period, conforming to food safety regulations. Within 2 h, films achieved 100% radical inhibition levels. Films displayed zero UVC (100-280 nm) and UVB (280-315 nm), and ~15% UVA (315-400 nm) radiation transmittance comparable to advanced sunscreen materials containing ZnO nanoparticles or quantum dots. Transparent films also exhibited promising water vapor and oxygen barrier properties, outperforming low-density polyethylene (LPDE) films. Several potential applications can be envisioned such as films for fatty food preservation, biofilms for sun screening, and biomedical films for free-radical inhibition.

12.
Molecules ; 25(11)2020 Jun 06.
Article in English | MEDLINE | ID: mdl-32517278

ABSTRACT

Hyaluronic acid (HA) also known as hyaluronan, is a natural polysaccharide-an anionic, non-sulfated glycosaminoglycan-commonly found in our bodies. It occurs in the highest concentrations in the eyes and joints. Today HA is used during certain eye surgeries and in the treatment of dry eye disease. It is a remarkable natural lubricant that can be injected into the knee for patients with knee osteoarthritis. HA has also excellent gelling properties due to its capability to bind water very quickly. As such, it is one the most attractive controlled drug release matrices and as such, it is frequently used in various biomedical applications. Due to its reactivity, HA can be cross-linked or conjugated with assorted bio-macromolecules and it can effectively encapsulate several different types of drugs, even at nanoscale. Moreover, the physiological significance of the interactions between HA and its main membrane receptor, CD44 (a cell-surface glycoprotein that modulates cell-cell interactions, cell adhesion and migration), in pathological processes, e.g. cancer, is well recognized and this has resulted in an extensive amount of studies on cancer drug delivery and tumor targeting. HA acts as a therapeutic but also as a tunable matrix for drug release. Thus, this review focuses on controlled or sustained drug release systems assembled from HA and its derivatives. More specifically, recent advances in controlled release of proteins, antiseptics, antibiotics and cancer targeting drugs from HA and its derivatives were reviewed. It was shown that controlled release from HA has many benefits such as optimum drug concentration maintenance, enhanced therapeutic effects, improved efficiency of treatment with less drug, very low or insignificant toxicity and prolonged in vivo release rates.


Subject(s)
Antineoplastic Agents/metabolism , Delayed-Action Preparations/chemistry , Drug Delivery Systems , Drug Liberation , Hyaluronic Acid/chemistry , Macromolecular Substances/chemistry , Animals , Humans
13.
J Colloid Interface Sci ; 574: 20-32, 2020 Aug 15.
Article in English | MEDLINE | ID: mdl-32298978

ABSTRACT

HYPOTHESIS: Certain biobased polymers or natural compounds can be effectively used in superhydrophobic coating formulations to reduce environmental impact of fluorinated compounds and related bioaccumulation and toxicity problems. Many environmental concerns have thus far been raised in relation to toxicity of solvents and C8 fluorine chemicals. Elimination of these important elements from non-wettable coating formulations can jeopardize non-wetting performance significantly. However, intelligent and innovative approaches that introduce ecofriendly resins and compounds in superhydrophobic coating formulations without significantly altering self-cleaning superhydrophobicity are possible and being reported. EXPERIMENTS: Superhydrophobic coatings based on a biomass-derived bioresin polyfurfuryl alcohol (PFA) were prepared. The coatings were made by blending PFA resin with a C6 perfluorinated acrylic copolymer PFAC in solution and subsequent spray coating. Silica nanoparticles were also added in order to repel some common oils. Coating morphology, chemical and thermal properties, biocompatibility and bacterial adhesion properties were studied in detail. FINDINGS: Coatings having 50 wt% bioresin revealed equal water-repellency performance comapred to 100% PFAC-based coatings. Healthy cell growth was maintained on the coatings with no cell toxicity using human cell line, HeLa cells. Superhydrophobic coatings demonstrated very low bacterial adhesion to E. coli, S. aureus and Ps. aeruginosa indicating promising biofouling resistance. The coatings did not require any post thermal annealing. This would cause significant energy savings for large-scale adaptation.


Subject(s)
Anti-Bacterial Agents/pharmacology , Bacterial Adhesion/drug effects , Escherichia coli/drug effects , Furans/pharmacology , Polymers/pharmacology , Pseudomonas aeruginosa/drug effects , Staphylococcus aureus/drug effects , Anti-Bacterial Agents/chemical synthesis , Anti-Bacterial Agents/chemistry , Biofouling/prevention & control , Furans/chemical synthesis , Furans/chemistry , HeLa Cells , Humans , Hydrophobic and Hydrophilic Interactions , Microbial Sensitivity Tests , Particle Size , Polymers/chemical synthesis , Polymers/chemistry , Surface Properties
14.
Sci Rep ; 10(1): 988, 2020 01 22.
Article in English | MEDLINE | ID: mdl-31969660

ABSTRACT

Coral reefs are vital for the marine ecosystem and their potential disappearance can have unequivocal consequences on our environment. Aside from pollution-related threats (changes in water temperature, plastics, and acidity), corals can be injured by diseases, predators, humans and other invasive species. Diseases play an important role in this decline, but so far very few mitigation strategies have been proposed and developed to control this threat. In this work, we demonstrate that recently developed bi-layer human skin wound treatment patches containing antiseptics and natural antioxidants with controlled-release capacity can be adapted to treat scleractinian coral wounds effectively. A hydrophilic bilayer film based on polyvinylpyrrolidone (PVP) and hyaluronic acid was used to cover the open wounds while delivering the antiseptics for rapid action. Afterwards, the hydrophilic bi-layer covered wound was sealed with an antioxidant and hydrophobic ε-caprolactone-p-coumaric acid copolymer by melt injection at low temperatures. Treated coral injuries were monitored both in aquaria system and in natural environment in Maldives for over 4 months to reduce the number of entry points for organisms that could lead to diseases. The corals well-tolerated both biomaterials as well as the antiseptics incorporated in these materials. The treatments displayed self-adhering properties, tuneable dissolution time, and biocompatibility and stimulated regeneration properties within the coral wound. As such, this work demonstrates that certain human skin wound treatment materials can be successfully adapted to the curing of coral wounds and delivery of specific drugs to slow down, reduce or even stop the spread of diseases in scleractinian corals as well as in all other benthic organisms affected by uncontrolled pathologies.


Subject(s)
Anthozoa/drug effects , Anti-Infective Agents, Local/pharmacology , Antioxidants/pharmacology , Conservation of Natural Resources/methods , Coral Reefs , Animals , Biopolymers
15.
Pharmaceutics ; 11(10)2019 Oct 12.
Article in English | MEDLINE | ID: mdl-31614886

ABSTRACT

Topical treatment of wound infections is often a challenge due to limited drug availability at the site of infection. Topical drug delivery is an attractive option for reducing systemic side effects, provided that a more selective and sustained local drug delivery is achieved. In this study, a poorly water-soluble antibiotic, ciprofloxacin, was loaded on polyvinylpyrrolidone (PVP)-based foils and nanofiber mats using acetic acid as a solubilizer. Drug delivery kinetics, local toxicity, and antimicrobial activity were tested on an ex vivo wound model based on full-thickness human skin. Wounds of 5 mm in diameter were created on 1.5 × 1.5 cm skin blocks and treated with the investigated materials. While nanofiber mats reached the highest amount of delivered drug after 6 h, foils rapidly achieved a maximum drug concentration and maintained it over 24 h. The treatment had no effect on the overall skin metabolic activity but influenced the wound healing process, as observed using histological analysis. Both delivery systems were efficient in preventing the growth of Pseudomonas aeruginosa biofilms in ex vivo human skin. Interestingly, foils loaded with 500 µg of ciprofloxacin accomplished the complete eradication of biofilm infections with 1 × 109 bacteria/wound. We conclude that antimicrobial-loaded resorbable PVP foils and nanofiber mats are promising delivery systems for the prevention or topical treatment of infected wounds.

16.
Adv Colloid Interface Sci ; 270: 216-250, 2019 Aug.
Article in English | MEDLINE | ID: mdl-31277037

ABSTRACT

Among superhydrophobic materials, non-wettable textiles are probably the ones that come in contact or interact with the human body most frequently. Hence, textile treatments for water or oil repellency should be non-toxic, biocompatible, and comply with stringent health standards. Moreover, considering the volume of the worldwide textile industry, these treatments should be scalable, sustainable, and eco-friendly. Due to this awareness, more and more non-wettable textile treatments with eco-friendly processes and green or non-toxic chemicals are being adopted and reported. Although fluorinated alkylsilanes or fluorinated polymers with C8 chemistry (with ≥ 8 fluorinated carbon atoms) are the best performing materials to render textiles water or oil repellent, they pose substantial health and environmental problems and are being banned. For this reason, water/solvent-borne, C8-free vehicles for non-wettable treatment formulations are probably the only ones that can have commercialization prospects. Hence, researchers have come up with a variety of new, non-toxic, green formulations and materials to render fabrics liquid repellent that constitute the focus of this review paper. As such, this review article discusses and summarizes recent developments and techniques on various sustainable superhydrophobic treatments for textiles, with comparable performance and durability to formulations based on fluorinated C8 compounds. The current state-of-the-art technologies, potential commercialization prospects, and relevant limitations are discussed and summarized with examples. The review also attempts to indicate promising future strategies and new materials that can transform the process for non-wettable textiles into an all-sustainable technology.

17.
Nanomaterials (Basel) ; 9(6)2019 May 31.
Article in English | MEDLINE | ID: mdl-31159243

ABSTRACT

Stacked-cup carbon nanotubes (SCCNTs) are generally referred to as carbon nanofibers (CNFs). SCCNTs are much less expensive to fabricate and are regarded as good polymer modifiers suitable for large-scale production. Flexible, SCCNT-based soy lecithin biocomposites were fabricated using liquid natural rubber latex as binder. Natural polymers and the SCCNTs were dispersed in a green solvent using a benchtop high-pressure homogenizer. The inks were simply brush-on painted onto cellulose fiber networks and compacted by a hydraulic press so as to transform into conductive paper-like form. The resulting flexible SCCNT papers demonstrated excellent resistance against severe folding and bending tests, with volume resistivity of about 85 Ω·cm at 20 wt % SCCNT loading. The solvent enabled formation of hydrogen bonding between natural rubber and soy lecithin. Thermomechanical measurements indicated that the biocomposites have good stability below and above glass transition points. Moreover, the SCCNT biocomposites had high through-plane thermal conductivity of 5 W/mK and 2000 kJ/m3K volumetric heat capacity, ideal for thermal interface heat transfer applications.

18.
Polymers (Basel) ; 11(6)2019 Jun 20.
Article in English | MEDLINE | ID: mdl-31226802

ABSTRACT

Poly(furfuryl alcohol) (PFA) is a bioresin synthesized from furfuryl alcohol (FA) that is derived from renewable saccharide-rich biomass. In this study, we compounded this bioresin with polycaprolactone (PCL) for the first time, introducing new functional polymer blends. Although PCL is biodegradable, its production relies on petroleum precursors such as cyclohexanone oils. With the method proposed herein, this dependence on petroleum-derived precursors/monomers is reduced by using PFA without significantly modifying some important properties of the PCL. Polymer blend films were produced by simple solvent casting. The blends were characterized in terms of surface topography by atomic force microscopy (AFM), chemical interactions between PCL and PFA by attenuated total reflection-Fourier transform infrared (ATR-FTIR), crystallinity by XRD, thermal properties by differential scanning calorimetry (DSC), and mechanical properties by tensile tests and biocompatibility by direct and indirect toxicity tests. PFA was found to improve the gas barrier properties of PCL without compromising its mechanical properties, and it demonstrated sustained antioxidant effect with excellent biocompatibility. Our results indicate that these new blends can be potentially used in diverse applications ranging from food packing to biomedical devices.

19.
J Mater Chem B ; 7(9): 1384-1396, 2019 03 07.
Article in English | MEDLINE | ID: mdl-32255009

ABSTRACT

Polyvinylpyrrolidone (PVP) has probably been one of the most utilized pharmaceutical polymers with applications ranging from a blood plasma substitute to nanoparticle drug delivery, since its synthesis in 1939. It is a highly biocompatible, non-toxic and transparent film forming polymer. Although high solubility of PVP in aqueous environment is advantageous, it still poses several problems for some applications in which sustained targeting and release are needed or hydrophobic drug inclusion and delivery systems are to be designed. In this study, we demonstrate that a common dietary phenolic antioxidant, p-coumaric acid (PCA), can be combined with PVP covering a wide range of molar ratios by solution blending in ethanol, forming new transparent biomaterial films with antiseptic and antioxidant properties. PCA not only acts as an effective natural plasticizer but also establishes H-bonds with PVP increasing its resistance to water dissolution. PCA could be released in a sustained manner up to a period of 3 days depending on the PVP/PCA molar ratio. Sustained drug delivery potential of the films was studied using methylene blue and carminic acid as model drugs, indicating that the release can be controlled. Antioxidant and remodeling properties of the films were evaluated in vitro by free radical cation scavenging assay and in vivo on a murine model, respectively. Furthermore, the material resorption of films was slower as PCA concentration increased, as observed from the in vivo full-thickness excision model. Finally, the antibacterial activity of the films against common pathogens such as Escherichia coli and Staphylococcus aureus and the effective reduction of inflammatory agents such as matrix metallopeptidases were demonstrated. All these properties suggest that these new transparent PVP/PCA films can find a plethora of applications in pharmaceutical sciences including skin and wound care.


Subject(s)
Antioxidants/chemistry , Biopolymers/chemistry , Coumaric Acids/chemistry , Drug Carriers/chemistry , Povidone/chemistry , Animals , Carmine/chemistry , Carmine/metabolism , Carmine/pharmacology , Coumaric Acids/metabolism , Coumaric Acids/pharmacology , Coumaric Acids/therapeutic use , Drug Liberation , Elastic Modulus , Escherichia coli/drug effects , Male , Matrix Metalloproteinase 9/metabolism , Methylene Blue/chemistry , Methylene Blue/metabolism , Methylene Blue/pharmacology , Mice , Mice, Inbred C57BL , Microbial Sensitivity Tests , Skin/metabolism , Skin/pathology , Skin Diseases/drug therapy , Skin Diseases/pathology , Staphylococcus aureus/drug effects , Water/chemistry
20.
ACS Appl Mater Interfaces ; 10(40): 34573-34584, 2018 Oct 10.
Article in English | MEDLINE | ID: mdl-30199218

ABSTRACT

Superglue monomers belong to a family of cyanoacrylates that are known for their very rapid polymerization upon contact with moist surfaces. Their biodegradation and low toxicity make them attractive as medical and veterinary adhesives. Although the fast-acting polymerization characteristics have been successfully utilized to design nanoscale polymeric particles that can carry drugs or other inorganic nanoparticles, it constitutes a significant drawback if one desires to produce other forms of functional biodegradable acrylics, such as coatings, sheets, or nanocomposites. This is because rapid polymerization in air creates highly porous and brittle structures. Here, we address this drawback by reporting a simple and inexpensive method of fabricating highly transparent (>92%) polyethylcyanoacrylate (PECA) coatings by dispersing the monomer in a fragrance-classified green liquid, cyclopentanone. The resulting transparent coatings were hydrophilic but with slippery wetting characteristics, suitable as efficient fog-harvesting templates. Furthermore, another fragrance liquid, benzyl alcohol, is introduced as a plasticizer and co-solvent to overcome its brittleness while retaining its transparency. The same plasticized monomer solutions, dispersing low concentrations of graphene (<0.5 wt %), were allowed to self-assemble on stainless steel surfaces, forming low-friction and anti-wear dry lubricants by decreasing the steel friction coefficient and wear rate by 6- and 10-fold, respectively.

SELECTION OF CITATIONS
SEARCH DETAIL
...