Analysis of Co-Channel Coexistence Mitigation Methods Applied to IEEE 802.11p and 5G NR-V2X Sidelink.

Direct communication between vehicles and surrounding objects, called vehicle-to-everything (V2X), is ready for the market and promises to raise the level of safety and comfort while driving. To this aim, specific bands have been reserved in some countries worldwide and different wireless technologies have been developed; however, these are not interoperable. Recently, the issue of co-channel coexistence has been raised, leading the European Telecommunications Standards Institute (ETSI) to propose a number of solutions, called mitigation methods, for the coexistence of the IEEE 802.11p based ITS-G5 and the 3GPP fourth generation (4G) long term evolution (LTE)-V2X sidelink. In this work, several of the envisioned alternatives are investigated when adapted to the coexistence of the IEEE 802.11p with its enhancement IEEE 802.11bd and the latest 3GPP standards, i.e., the fifth generation (5G) new radio (NR)-V2X. The results, obtained through an open-source simulator that is shared with the research community for the evaluation of additional proposals, show that the methods called A and C, which require modifications to the standards, improve the transmission range of one or both systems without affecting the other, at least in low-density scenarios.

A Methodology for Abstracting the Physical Layer of Direct V2X Communications Technologies.

Recent advancements in vehicle-to-everything (V2X) communications have greatly increased the flexibility of the physical (PHY) and medium access control (MAC) layers. This increases the complexity when investigating the system from a network perspective to evaluate the performance of the supported applications. Such flexibility, in fact, needs to be taken into account through a cross-layer approach, which might lead to challenging evaluation processes. As an accurate simulation of the signals appears unfeasible, a typical solution is to rely on simple models for incorporating the PHY layer of the supported technologies based on off-line measurements or accurate link-level simulations. Such data are, however, limited to a subset of possible configurations, and extending them to others is costly when not even impossible. The goal of this paper is to develop a new approach for modeling the PHY layer of V2X communications that can be extended to a wide range of configurations without leading to extensive measurement or simulation campaigns at the link layer. In particular, given a scenario and starting from results in terms of the packet error rate (PER) vs. signal-to-interference-plus-noise ratio (SINR) related to a subset of possible configurations, we first approximated the curves with step functions characterized by a given SINR threshold, and we then derived one parameter, called implementation loss, that was used to obtain the SINR threshold and evaluate the network performance under any configuration in the same scenario. The proposed methodology, leading to a good trade-off among the complexity, generality, and accuracy of the performance evaluation process, was validated through extensive simulations with both IEEE 802.11p and LTE-V2X sidelink technologies in various scenarios. The results first show that the curves can be effectively approximated by using an SINR threshold, with a value corresponding to 0.5 PER, and then demonstrate that the network-level outputs derived from the proposed approach are very close to those obtained with complete curves, despite not being restricted to a few possible configurations.

Trajectories and Resource Management of Flying Base Stations for C-V2X.

In a vehicular scenario where the penetration of cars equipped with wireless communication devices is far from 100% and application requirements tend to be challenging for a cellular network not specifically planned for it, the use of unmanned aerial vehicles (UAVs), carrying mobile base stations, becomes an interesting option. In this article, we consider a cellular-vehicle-to-anything (C-V2X) application and we propose the integration of an aerial and a terrestrial component of the network, to fill the potential unavailability of short-range connections among vehicles and address unpredictable traffic distribution in space and time. In particular, we envision a UAV with C-V2X equipment providing service for the extended sensing application, and we propose a UAV trajectory design accounting for the radio resource (RR) assignment. The system is tested considering a realistic scenario by varying the RRs availability and the number of active vehicles. Simulations show the results in terms of gain in throughput and percentage of served users, with respect to the case in which the UAV is not present.

A Survey on the Roadmap to Mandate on Board Connectivity and Enable V2V-Based Vehicular Sensor Networks.

Vehicles will soon be connected and will be interacting directly with each other and with the road infrastructure, bringing substantial benefits in terms of safety and traffic efficiency. The past decade has seen the development of different wireless access technologies for vehicle-to-everything (V2X) communications and an extensive set of related use cases have been drafted, each with its own requirements. In this paper, focusing on short-range communications, we analyze the technical and economic motivations that are driving the development of new road users' connectivity, discussing the international intentions to mandate on board devices for V2X communication. We also go in depth with the enabling wireless access technologies, from IEEE 802.11p to short-range Cellular-V2X and other complementary technologies, such as visible light communication (VLC) and millimeterWaves, up to hybrid communication and 5G. We conclude our survey with some performance comparison in urban realistic scenarios, underlying that the choice of the future enabling technology is not so easy to predict and mostly depends on mandatory laws at the international level.

Vehicular Visible Light Networks for Urban Mobile Crowd Sensing.

Crowd sensing is a powerful tool to map and predict interests and events. In the future, it could be boosted by an increasing number of connected vehicles sharing information and intentions. This will be made available by on board wireless connected devices able to continuously communicate with other vehicles and with the environment. Among the enabling technologies, visible light communication (VLC) represents a low cost solution in the short term. In spite of the fact that vehicular communications cannot rely on the sole VLC due to the limitation provided by the light which allows communications in visibility only, VLC can however be considered to complement other wireless communication technologies which could be overloaded in dense scenarios. In this paper we evaluate the performance of VLC connected vehicles when urban crowd sensing is addressed and we compare the performance of sole vehicular visible light networks with that of VLC as a complementary technology of IEEE 802.11p. Results, obtained through a realistic simulation tool taking into account both the roadmap constraints and the technologies protocols, help to understand when VLC provides the major improvement in terms of delivered data varying the number and position of RSUs and the FOV of the receiver.