Ottawa classification for symptomatic acetabular dysplasia assessment of interobserver and intraobserver reliability.

AIMS: The aim of the current study was to assess the reliability of the Ottawa classification for symptomatic acetabular dysplasia. METHODS: In all, 134 consecutive hips that underwent periacetabular osteotomy were categorized using a validated software (Hip2Norm) into four categories of normal, lateral/global, anterior, or posterior. A total of 74 cases were selected for reliability analysis, and these included 44 dysplastic and 30 normal hips. A group of six blinded fellowship-trained raters, provided with the classification system, looked at these radiographs at two separate timepoints to classify the hips using standard radiological measurements. Thereafter, a consensus meeting was held where a modified flow diagram was devised, before a third reading by four raters using a separate set of 74 radiographs took place. RESULTS: Intrarater results per surgeon between Time 1 and Time 2 showed substantial to almost perfect agreement among the raters (κappa = 0.416 to 0.873). With respect to inter-rater reliability, at Time 1 and Time 2 there was substantial agreement overall between all surgeons (Time 1 κappa = 0.619; Time 2 κappa = 0.623). Posterior and anterior rating categories had moderate and fair agreement at Time 1 (posterior κappa = 0.557; anterior κappa = 0.438) and Time 2 (posterior κappa = 0.506; anterior κappa = 0.250), respectively. At Time 3, overall reliability (κappa = 0.687) and posterior and anterior reliability (posterior κappa = 0.579; anterior κappa = 0.521) improved from Time 1 and Time 2. CONCLUSION: The Ottawa classification system provides a reliable way to identify three categories of acetabular dysplasia that are well-aligned with surgical management. The term 'borderline dysplasia' should no longer be used.Cite this article: Bone Joint Res. 2020;9(5):242-249.

Can spinopelvic mobility be predicted in patients awaiting total hip arthroplasty? A prospective, diagnostic study of patients with end-stage hip osteoarthritis.

AIMS: This study of patients with osteoarthritis (OA) of the hip aimed to: 1) characterize the contribution of the hip, spinopelvic complex, and lumbar spine when moving from the standing to the sitting position; 2) assess whether abnormal spinopelvic mobility is associated with worse symptoms; and 3) identify whether spinopelvic mobility can be predicted from static anatomical radiological parameters. PATIENTS AND METHODS: A total of 122 patients with end-stage OA of the hip awaiting total hip arthroplasty (THA) were prospectively studied. Patient-reported outcome measures (PROMs; Oxford Hip Score, Oswestry Disability Index, and Veterans RAND 12-Item Health Survey Score) and clinical data were collected. Sagittal spinopelvic mobility was calculated as the change from the standing to sitting position using the lumbar lordosis angle (LL), sacral slope (SS), pelvic tilt (PT), pelvic-femoral angle (PFA), and acetabular anteinclination (AI) from lateral radiographs. The interaction of the different parameters was assessed. PROMs were compared between patients with normal spinopelvic mobility (10° ≤ ∆PT ≤ 30°) or abnormal spinopelvic mobility (stiff: ∆PT < ± 10°; hypermobile: ∆PT > ± 30°). Multiple regression and receiver operating characteristic (ROC) curve analyses were used to test for possible predictors of spinopelvic mobility. RESULTS: Standing to sitting, the hip flexed by a mean of 57° (sd 17°), the pelvis tilted backwards by a mean of 20° (sd 12°), and the lumbar spine flexed by a mean of 20° (sd 14°); strong correlations were detected. There was no difference in PROMs between patients in the different spinopelvic mobility groups. Maximum hip flexion, standing PT, and standing AI were independent predictors of spinopelvic mobility (R2 = 0.42). The combined thresholds for standing was PT ≥ 13° and hip flexion ≥ 88° in the clinical examination, and had 90% sensitivity and 63% specificity of predicting spinopelvic stiffness, while SS ≥ 42° had 84% sensitivity and 67% specificity of predicting spinopelvic hypermobility. CONCLUSION: The hip, on average, accounts for three-quarters of the standing-to-sitting movement, but there is great variation. Abnormal spinopelvic mobility cannot be screened with PROMs. However, clinical and standing radiological features can predict spinopelvic mobility with good enough accuracy, allowing them to be used as reliable screening tools. Cite this article: Bone Joint J 2019;101-B:902-909.

Is end-organ surveillance necessary in patients with well-functioning metal-on-metal hip resurfacings? A cardiac MRI survey.

AIMS: Cardiac magnetic resonance (CMR) was used to assess whether cardiac function or tissue composition was affected in patients with well-functioning metal-on-metal hip resurfacing arthroplasties (MoMHRA) when compared with a group of controls, and to assess if metal ion levels correlated with any of the functional or structural parameters studied. PATIENTS AND METHODS: In all, 30 participants with no significant cardiac history were enrolled: 20 patients with well-functioning MoMHRA at mean follow-up of 8.3 years post-procedure (ten unilateral, ten bilateral; 17 men, three women) and a case-matched control group of ten non-MoM total hip arthroplasty patients (six men, four women). The mean age of the whole cohort (study group and controls) at the time of surgery was 50.6 years (41.0 to 64.0). Serum levels of cobalt and chromium were measured, and all patients underwent CMR imaging, including cine, T2* measurements, T1 and T2 mapping, late gadolinium enhancement, and strain measurements. RESULTS: None of the MoMHRA patients showed clinically significant cardiac functional abnormality. The MoMHRA patients had larger indexed right and left end diastolic volumes (left ventricular (LV): 74 ml/m2vs 67 ml/m2, p = 0.045; right ventricular: 80 ml/m2vs 71 ml/m2, p = 0.02). There was a small decrease in T2 time in the MoMHRA patients (median 49 ms vs 54 ms; p = 0.0003). Higher metal ion levels were associated with larger LV volumes and with shorter T2 time. CONCLUSION: Although cardiac function is not clinically adversely affected in patients with well-functioning MoMHRA, modern imaging is able to demonstrate subtle changes in structure and function of the heart. As these changes correlate with systemic ion measurements, they may be consequences of wear debris deposition. Longer, longitudinal studies are necessary to determine whether cardiac function will become affected. Cite this article: Bone Joint J 2019;101-B:540-546.

Pelvic positioning in the supine position leads to more consistent orientation of the acetabular component after total hip arthroplasty.

AIMS: This study aims to: determine the difference in pelvic position that occurs between surgery and radiographic, supine, postoperative assessment; examine how the difference in pelvic position influences subsequent component orientation; and establish whether differences in pelvic position, and thereafter component orientation, exist between total hip arthroplasties (THAs) performed in the supine versus the lateral decubitus positions. PATIENTS AND METHODS: The intra- and postoperative anteroposterior pelvic radiographs of 321 THAs were included; 167 were performed with the patient supine using the anterior approach and 154 were performed with the patient in the lateral decubitus using the posterior approach. The inclination and anteversion of the acetabular component was measured and the difference (Δ) between the intra- and postoperative radiographs was determined. The target zone was inclination/anteversion of 40°/20° (± 10°). Changes in the tilt, rotation, and obliquity of the pelvis on the intra- and postoperative radiographs were calculated from Δinclination/anteversion using the Levenberg-Marquardt algorithm. RESULTS: The mean postoperative inclination/anteversion was 40° (± 8°)/23° (± 9°) with Δinclination and/or Δanteversion > ± 10° in 74 (21%). Intraoperatively, the pelvis was anteriorly tilted by a mean of 4° (± 10°), internally rotated by a mean of 1° (± 10°) and adducted by a mean of 1° (± 5°). Having Δinclination and/or Δanteversion > ± 10° was associated with a 3.5 odds ratio of having the acetabular component outside the target zone. A greater proportion of THAs that were undertaken with the patient in the lateral decubitus position had Δinclination and/or Δanteversion > ± 10° (35.3%, 54/153) compared with those in the supine position (4.8%, 8/167; p < 0.001). A greater number of acetabular components were within the target zone in THAs undertaken with the patient in the supine position (72%, 120/167), compared with those in the lateral decubitus position (44%, 67/153; p < 0.001). Intraoperatively, the pelvis was more anteriorly tilted (p < 0.001) and more internally rotated (p = 0.04) when the patient was in the lateral decubitus position. CONCLUSION: The pelvic position is more reliable when the patient is in the supine position, leading to more consistent orientation of the acetabular component. Significant differences in pelvic tilt and rotation are seen with the patient in the lateral decubitus position. Cite this article: Bone Joint J 2018;100-B:1280-8.

Bone density changes following surgical correction of femoroacetabular impingement deformities.

OBJECTIVE: Femoroacetabular impingement (FAI) involves abnormal hip biomechanics due to deformities and is associated with osteoarthritis. Bone mineral density (BMD) in the acetabulum is higher in subjects with convex femoral (cam) FAI deformities compared to control subjects. The objective of this study was to assess post-operative changes of BMD with and without surgical correction of the cam deformity. DESIGN: Thirteen patients with bilateral cam deformities but unilateral symptoms underwent pre-operative and follow-up computed tomography (CT) scans of both hips. The deformity was surgically removed from the symptomatic hip. BMD was measured in regions of interest (ROI) around the superior acetabulum from CT scans at both time points. The contralateral untreated hip was used as a within-patient control. Changes in BMD were assessed by two-way repeated measures ANOVA (side, time) and paired t-tests. RESULTS: A greater BMD decrease was seen in the treated compared to the untreated hip (P < 0.0018). BMD within the superior acetabulum decreased by 39 mg/cc on the treated side (P < 0.0001) but only 9 mg/cc (P = 0.15) in the untreated contralateral hip. These changes represent 7.1% and 1.7% of the pre-operative BMD on the respective sides. CONCLUSIONS: BMD decreased in the treated hip, suggesting a positive effect of surgical correction in relieving stresses within the hip joint. Longer term follow-up is required to assess the ultimate fate of the articular cartilage within the joint. This study showed that surgical correction of the cam deformity in patients with FAI may alter the pathological biomechanics within the joint.

Does acetabular coverage influence the clinical outcome of arthroscopically treated cam-type femoroacetabular impingement (FAI)?

Aims: What represents clinically significant acetabular undercoverage in patients with symptomatic cam-type femoroacetabular impingement (FAI) remains controversial. The aim of this study was to examine the influence of the degree of acetabular coverage on the functional outcome of patients treated arthroscopically for cam-type FAI. Patients and Methods: Between October 2005 and June 2016, 88 patients (97 hips) underwent arthroscopic cam resection and concomitant labral debridement and/or refixation. There were 57 male and 31 female patients with a mean age of 31.0 years (17.0 to 48.5) and a mean body mass index (BMI) of 25.4 kg/m2 (18.9 to 34.9). We used the Hip2Norm, an object-oriented-platform program, to perform 3D analysis of hip joint morphology using 2D anteroposterior pelvic radiographs. The lateral centre-edge angle, anterior coverage, posterior coverage, total femoral coverage, and alpha angle were measured for each hip. The presence or absence of crossover sign, posterior wall sign, and the value of acetabular retroversion index were identified automatically by Hip2Norm. Patient-reported outcome scores were collected preoperatively and at final follow-up with the Hip Disability and Osteoarthritis Outcome Score (HOOS). Results: At a mean follow-up of 2.7 years (1 to 8, sd 1.6), all functional outcome scores significantly improved overall. Radiographically, only preoperative anterior coverage had a negative correlation with the improvement of the HOOS symptom subscale (r = -0.28, p = 0.005). No significant difference in relative change in HOOS subscale scores was found according to the presence or absence of radiographic signs of retroversion. Discussion: Our study demonstrated the anterior coverage as an important modifier influencing the functional outcome of arthroscopically treated cam-type FAI. Cite this article: Bone Joint J 2018;100-B:831-8.

Defining modes of failure after joint-preserving surgery of the hip.

AIMS: Joint-preserving surgery of the hip (JPSH) has evolved considerably and now includes a number of procedures, including arthroscopy, surgical dislocation, and redirectional osteotomies of the femur and acetabulum. There are a number of different factors which lead to failure of JPSH. Consequently, it is of interest to assess the various modes of failure in order to continue to identify best practice and the indications for these procedures. PATIENTS AND METHODS: Using a retrospective observational study design, we reviewed 1013 patients who had undergone JPSH by a single surgeon between 2005 and 2015. There were 509 men and 504 women with a mean age of 39 years (16 to 78). Of the 1013 operations, 783 were arthroscopies, 122 surgical dislocations, and 108 peri-acetabular osteotomies (PAO). We analysed the overall failure rates and modes of failure. Re-operations were categorised into four groups: Mode 1 was arthritis progression or organ failure leading to total hip arthroplasty (THA); Mode 2 was an Incorrect diagnosis/procedure; Mode 3 resulted from malcorrection of femur (type A), acetabulum (type B), or labrum (type C) and Mode 4 resulted from an unintended consequence of the initial surgical intervention. RESULTS: At a mean follow-up of 2.5 years, there had been 104 re-operations (10.2%) with a mean patient age of 35.5 years (17 to 64). There were 64 Mode 1 failures (6.3%) at a mean of 3.2 years following JPSH with a mean patient age of 46.8 years (18 to 64). There were 17 Mode 2 failures (1.7%) at a mean of 2.2 years post-JPSH with a mean patient age of 28.9 years (17 to 42) (2% scopes; 1% surgical dislocations). There were 19 Mode 3 failures (1.9%) at a mean of 2.0 years post-JPSH, with a mean patient age of 29.9 years (18 to 51) (2% scopes; 2% surgical dislocations; 5% PAO). There were 4 Mode 4 failures (0.4%) at a mean of 1.8 years post-JPSH with a mean patient age of 31.5 years (15 to 43). Using the modified Dindo-Clavien classification system, the overall complication rate among JPSHs was 4.2%. CONCLUSION: While defining the overall re-operation and complication rates, it is important to define the safety and effectiveness of JPSH. Standardisation of the modes of failure may help identify the best practice. Application of these modes to large clinical series, such as registries, will assist in further establishing how to improve the efficacy of JPSH. Cite this article: Bone Joint J 2017;99-B:303-9.

Is the hip capsule thicker in diseased hips?

OBJECTIVES: The purpose of this study was to compare the thickness of the hip capsule in patients with surgical hip disease, either with cam-femoroacetabular impingement (FAI) or non-FAI hip pathology, with that of asymptomatic control hips. METHODS: A total of 56 hips in 55 patients underwent a 3Tesla MRI of the hip. These included 40 patients with 41 hips with arthroscopically proven hip disease (16 with cam-FAI; nine men, seven women; mean age 39 years, 22 to 58) and 25 with non-FAI chondrolabral pathology (four men, 21 women; mean age 40 years, 18 to 63) as well as 15 asymptomatic volunteers, whose hips served as controls (ten men, five women; mean age 62 years, 33 to 77). The maximal capsule thickness was measured anteriorly and superiorly, and compared within and between the three groups with a gender subanalysis using student's t-test. The correlation between alpha angle and capsule thickness was determined using Pearson's correlation coefficient. RESULTS: Superiorly, the hip capsule was significantly greater in cam- (p = 0.028) and non-FAI (p = 0.048) surgical groups compared with the asymptomatic group. Within groups, the superior capsule thickness was significantly greater than the anterior in cam- (p < 0.001) and non-FAI (p < 0.001) surgical groups, but not in the control group. There was no significant correlation between the alpha angle and capsule thickness. There were no gender differences identified in the thickness of the hip capsule. CONCLUSION: The thickness of the capsule does not differ between cam- and non-FAI diseased hips, and thus may not be specific for a particular aetiology of hip disease. The capsule is, however, thicker in diseased surgical hips compared with asymptomatic control hips.Cite this article: K. S. Rakhra, A. A. Bonura, R. Nairn, M. E. Schweitzer, N. M. Kolanko, P. E. Beaule. Is the hip capsule thicker in diseased hips? Bone Joint Res 2016;5:586-593. DOI: 10.1302/2046-3758.511.2000495.

Blood metal ion levels are not a useful test for adverse reactions to metal debris: A systematic review and meta-analysis.

OBJECTIVES: Alarm over the reported high failure rates for metal-on-metal (MoM) hip implants as well as their potential for locally aggressive Adverse Reactions to Metal Debris (ARMDs) has prompted government agencies, internationally, to recommend the monitoring of patients with MoM hip implants. Some have advised that a blood ion level >7 µg/L indicates potential for ARMDs. We report a systematic review and meta-analysis of the performance of metal ion testing for ARMDs. METHODS: We searched MEDLINE and EMBASE to identify articles from which it was possible to reconstruct a 2 × 2 table. Two readers independently reviewed all articles and extracted data using explicit criteria. We computed a summary receiver operating curve using a Bayesian random-effects hierarchical model. RESULTS: Our literature search returned 575 unique articles; only six met inclusion criteria defined a priori. The discriminative capacity of ion tests was homogeneous across studies but that there was substantial cut-point heterogeneity. Our best estimate of the "true" area under curve (AUC) for metal ion testing is 0.615, with a 95% credible interval of 0.480 to 0.735, thus we can state that the probability that metal ion testing is actually clinically useful with an AUC ≥ 0.75 is 1.7%. CONCLUSION: Metal ion levels are not useful as a screening test for identifying high risk patients because ion testing will either lead to a large burden of false positive patients, or otherwise marginally modify the pre-test probability. With the availability of more accurate non-invasive tests, we did not find any evidence for using blood ion levels to diagnose symptomatic patients.Cite this article: M. Pahuta, J. M. Smolders, J. L. van Susante, J. Peck, P. R. Kim, P. E. Beaule. Blood metal ion levels are not a useful test for adverse reactions to metal debris: a systematic review and meta-analysis. Bone Joint Res 2016;5:379-386. DOI: 10.1302/2046-3758.59.BJR-2016-0027.R1.

The acetabular labrum: a review of its function.

UNLABELLED: The acetabular labrum is a soft-tissue structure which lines the acetabular rim of the hip joint. Its role in hip joint biomechanics and joint health has been of particular interest over the past decade. In normal hip joint biomechanics, the labrum is crucial in retaining a layer of pressurised intra-articular fluid for joint lubrication and load support/distribution. Its seal around the femoral head is further regarded as a contributing to hip stability through its suction effect. The labrum itself is also important in increasing contact area thereby reducing contact stress. Given the labrum's role in normal hip joint biomechanics, surgical techniques for managing labral damage are continuously evolving as our understanding of its anatomy and function continue to progress. The current paper aims to review the anatomy and biomechanical function of the labrum and how they are affected by differing surgical techniques. TAKE HOME MESSAGE: The acetabular labrum plays a critical role in hip function and maintaining and restoring its function during surgical intervention remain an essential goal. Cite this article: Bone Joint J 2016;98-B:730-5.

The impact of frailty on outcomes and healthcare resource usage after total joint arthroplasty: a population-based cohort study.

AIMS: Total joint arthroplasty (TJA) is commonly performed in elderly patients. Frailty, an aggregate expression of vulnerability, becomes increasingly common with advanced age, and independently predicts adverse outcomes and the use of resources after a variety of non-cardiac surgical procedures. Our aim was to assess the impact of frailty on outcomes after TJA. PATIENTS AND METHODS: We analysed the impact of pre-operative frailty on death and the use of resources after elective TJA in a population-based cohort study using linked administrative data from Ontario, Canada. RESULTS: Of 125 163 patients aged > 65 years having elective TJA, 3023 (2.4%) were frail according to the Johns Hopkins ACG frailty-defining diagnoses indicator. One year follow-up was complete for all patients. Frail patients had a higher adjusted one year risk of mortality (hazard ratio 3.03, 95% confidence interval (CI) 2.62 to 3.51), a higher rate of admission to intensive care (odds ratio (OR) 2.52, 95% CI 2.21 to 2.89), increased length of stay (incidence rate ratio 1.62, 95% CI 1.59 to 1.65), a higher rate of discharge to institutional care (OR 2.09, 95% CI 1.93 to 2.25), a higher rate of re-admission (OR 1.33, 95% CI 1.07 to 1.66) and increased costs at 30, 90 and 365 days post-operatively. Frailty affected outcomes after total hip arthroplasty more than after total knee arthroplasty. TAKE HOME MESSAGE: Frailty is an important risk factor for death after elective TJA, and increases post-operative resource utilisation across many metrics. Processes to optimise the outcomes and efficiency of TJA in frail patients are needed. Cite this article: Bone Joint J 2016;98-B:799-805.

Perfusion MRI in hips with metal-on-metal and metal-on-polyethylene total hip arthroplasty: A pilot study.

OBJECTIVES: Hips with metal-on-metal total hip arthroplasty (MoM THA) have a high rate of adverse local tissue reactions (ALTR), often associated with hypersensitivity reactions. Dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) measures tissue perfusion with the parameter Ktrans (volume transfer constant of contrast agent). Our purpose was 1) to evaluate the feasibility of DCE-MRI in patients with THA and 2) to compare DCE-MRI in patients with MoM bearings with metal-on-polyethylene (MoP) bearings, hypothesising that the perfusion index Ktrans in hips with MoM THA is higher than in hips with MoP THA. METHODS: In this pilot study, 16 patients with primary THA were recruited (eight MoM, eight MoP). DCE-MRI of the hip was performed at 1.5 Tesla (T). For each patient, Ktrans was computed voxel-by-voxel in all tissue lateral to the bladder. The mean Ktrans for all voxels was then calculated. These values were compared with respect to implant type and gender, and further correlated with clinical parameters. RESULTS: There was no significant difference between the two bearing types with both genders combined. However, dividing patients by THA bearing and gender, women with MoM bearings had the highest Ktrans values, exceeding those of women with MoP bearings (0.067 min(-1) versus 0.053 min(-1); p-value < 0.05) and men with MoM bearings (0.067 min(-1) versus 0.034 min(-1); p-value < 0.001). Considering only the men, patients with MoM bearings had lower Ktrans than those with MoP bearings (0.034 min(-1) versus 0.046 min(-1); p < 0.05). CONCLUSION: DCE-MRI is feasible to perform in tissues surrounding THA. Females with MoM THA show high Ktrans values in DCE-MRI, suggesting altered tissue perfusion kinematics which may reflect relatively greater inflammation.Cite this article: Dr P. E. Beaule. Perfusion MRI in hips with metal-on-metal and metal-on-polyethylene total hip arthroplasty: A pilot stud. Bone Joint Res 2016;5:73-79. DOI: 10.1302/2046-3758.53.2000572.

Femoral subchondral bone properties of patients with cam-type femoroacetabular impingement.

OBJECTIVE: Morphological deformities of the hip, such as femoroacetabular impingement (FAI) may be responsible for up to 80% of hip osteoarthritis. In cam type FAI, the pathomechanism has been attributed to repeated abnormal contact between the femur and the antero-superior acetabular rim, resulting in cartilage and labrum degeneration. Subchondral bone stiffness likely plays a major role in the process, but little is known of the mechanical properties of the cam deformity. The purpose of this study was to determine tissue modulus and the trabecular micro-architecture of the subchondral bone of the cam deformity of patients undergoing resection surgery as well as comparing these parameters to healthy aged matched controls. DESIGN: Twelve osteochondral bone biopsies were obtained from symptomatic FAI patients and ten osteochondral control specimens were harvested from cadaveric femurs. A combination of mechanical testing, micro-CT and finite element (FE) analysis were used to determine tissue modulus, bone volume fraction, trabecular thickness, trabecular and spacing, and trabecular number. RESULTS: The mean tissue modulus of the cam-type FAI deformities (E = 5.4 GPa) was significantly higher than normal controls (E = 2.75 GPa, P = 0.038), but no statistically significant differences were found in bone micro-architectural parameters. CONCLUSIONS: The data suggests that subchondral bone of the cam deformity consists of older secondary mineralized bone. This supports the notion that the cam deformity is a primary malformation with intrinsic biomechanical abnormalities rather than a secondary deformity as part of the degenerative process of the covering cartilage or remodeling due to repeated impingement.

A randomised controlled trial of cemented and cementless femoral components for metal-on-metal hip resurfacing: a bone mineral density study.

The primary purpose of this study of metal-on-metal (MoM) hip resurfacing was to compare the effect of using a cementless or cemented femoral component on the subsequent bone mineral density (BMD) of the femoral neck. This was a single-centre, prospective, double-blinded control trial which randomised 120 patients (105 men and 15 women) with a mean age of 49.4 years (21 to 68) to receive either a cemented or cementless femoral component. Follow-up was to two years. Outcome measures included total and six-point region-of-interest BMD of the femoral neck, radiological measurements of acetabular inclination, neck-shaft and stem-shaft angles, and functional outcome scores including the Harris hip score, the Western Ontario and McMaster Universities Osteoarthritis Index and the University of California at Los Angeles activity scale. In total, 17 patients were lost to follow-up leaving 103 patients at two years. There were no revisions in the cementless group and three revisions (5%) in the cemented group (two because of hip pain and one for pseudotumour). The total BMD was significantly higher in the cementless group at six months (p < 0.001) and one year (p = 0.01) than in the cemented group, although there was a loss of statistical significance in the difference at two years (p = 0.155). All patient outcomes improved significantly: there were no significant differences between the two groups. The results show better preservation of femoral neck BMD with a cementless femoral component after two years of follow-up. Further investigation is needed to establish whether this translates into improved survivorship.

Predicting early clinical function after hip or knee arthroplasty.

OBJECTIVES: Patient function after arthroplasty should ideally quickly improve. It is not known which peri-operative function assessments predict length of stay (LOS) and short-term functional recovery. The objective of this study was to identify peri-operative functions assessments predictive of hospital LOS and short-term function after hospital discharge in hip or knee arthroplasty patients. METHODS: In total, 108 patients were assessed peri-operatively with the timed-up-and-go (TUG), Iowa level of assistance scale, post-operative quality of recovery scale, readiness for hospital discharge scale, and the Western Ontario and McMaster Osteoarthritis Index (WOMAC). The older Americans resources and services activities of daily living (ADL) questionnaire (OARS) was used to assess function two weeks after discharge. RESULTS: Following multiple regressions, the pre- and post-operative day two TUG was significantly associated with LOS and OARS score, while the pre-operative WOMAC function subscale was associated with the OARS score. Pre-operatively, a cut-off TUG time of 11.7 seconds for LOS and 10.3 seconds for short-term recovery yielded the highest sensitivity and specificity, while a cut-off WOMAC function score of 48.5/100 yielded the highest sensitivity and specificity. Post-operatively, a cut-off day two TUG time of 31.5 seconds for LOS and 30.9 seconds for short-term function yielded the highest sensitivity and specificity. CONCLUSIONS: The pre- and post-operative day two TUG can indicate hospital LOS and short-term functional capacities, while the pre-operative WOMAC function subscale can indicate short-term functional capacities. Cite this article: Bone Joint Res 2015;4:145-151.

Is the contralateral hip at risk in patients with unilateral symptomatic cam femoroacetabular impingement? A quantitative T1ρ MRI study.

OBJECTIVES: To assess the profile of weight-bearing cartilage of hips with a cam deformity using T1ρ magnetic resonance imaging (MRI) and evaluate for a side-to-side difference in the T1ρ profile of patients with bilateral cam morphology but only unilateral hip pain. METHODS: 19 patients with bilateral cam morphology undergoing osteochondroplasty for unilateral hip pain were prospectively recruited. Anterior and anterosuperior alpha angles were measured using computer tomography. All patients underwent bilateral 1.5T T1ρ MRI. The cartilage bilayer of the hip joint was evaluated and the mean T1ρ relaxation time calculated for each quadrant of the weight-bearing surface. RESULTS: Mean T1ρ relaxation times were not significantly different when each quadrant was compared to the rest of the weight-bearing surface of the symptomatic (P = 0.068) and asymptomatic hips (P = 0.102). There was also no significant side-to-side difference between the same quadrants of symptomatic and asymptomatic hips. No correlation was detected between alpha angle and the mean T1ρ relaxation time in each quadrant. There was no significant difference in mean alpha angles between the symptomatic and asymptomatic sides at the anterior (54.2 vs 56.0°; P = 0.382) and anterosuperior positions (65.1 vs 65.2°; P = 0.971). CONCLUSION: We conclude that previously observed regional variation in T1ρ values of normal hips is altered in hips with cam morphology. No difference in T1ρ values between symptomatic and asymptomatic cam hips was demonstrated. Therefore, regardless of the presence of hip pain, a cam deformity may predispose to hip joint cartilage degradation and increase the risk of hip osteoarthritis.

The femoral head-neck contour varies as a function of physeal development.

OBJECTIVES: The purpose of this study was to investigate whether the femoral head-neck contour, characterised by the alpha angle, varies with the stage of physeal maturation using MRI evaluation of an asymptomatic paediatric population. METHODS: Paediatric volunteers with asymptomatic hips were recruited to undergo MRI of both hips. Femoral head physes were graded from 1 (completely open) to 6 (completely fused). The femoral head-neck contour was evaluated using the alpha angle, measured at the 3:00 (anterior) and 1:30 (anterosuperior) positions and correlated with physeal grade, with gender sub-analysis performed. RESULTS: A total of 43 asymptomatic paediatric volunteers (26 male, 17 female) with mean age 13.0 years (eight to 18) were included with review of bilateral hip MRIs. Correlation between the physeal grade and alpha angle was moderate in males at both the 3:00 (r = 0.477, p < 0.001) and 1:30 (r = 0.509, p < 0.001) positions, whereas there was no significant correlation in females. A significant difference was found between the alpha angles of all the physeal grades (3:00, p = 0.030, 1:30, p = 0.005), but only in males, with the angle increasing with higher grades. For physeal grading, the inter-reader reliability was substantial (intraclass correlation coefficient (ICC) = 0.694), and the intra-reader reliability was also substantial (ICC = 0.788). CONCLUSION: The femoral head-neck contour varies and correlates with the stage of physeal development, but only in males, with the alpha angle increasing with progressive physeal maturation. This suggests that gender differences exist in the natural physiological growth, development or remodelling of femoral head-neck junction. In males, pre-physeal fusion may be a critical period of vulnerability for development of morphologic abnormalities of the femoral head-neck junction. Cite this article: Bone Joint Res 2015;4:17-22.

Peri-acetabular bone mineral densityin total hip replacement.

OBJECTIVES: To quantify and compare peri-acetabular bone mineral density (BMD) between a monoblock acetabular component using a metal-on-metal (MoM) bearing and a modular titanium shell with a polyethylene (PE) insert. The secondary outcome was to measure patient-reported clinical function. METHODS: A total of 50 patients (25 per group) were randomised to MoM or metal-on-polyethlene (MoP). There were 27 women (11 MoM) and 23 men (14 MoM) with a mean age of 61.6 years (47.7 to 73.2). Measurements of peri-prosthetic acetabular and contralateral hip (covariate) BMD were performed at baseline and at one and two years' follow-up. The Western Ontario and McMaster Universities osteoarthritis index (WOMAC), University of California, Los Angeles (UCLA) activity score, Harris hip score, and RAND-36 were also completed at these intervals. RESULTS: At two years, only zone 1 showed a loss in BMD (-2.5%) in MoM group compared with a gain in the MoP group (+2.2%). Zone 2 showed loss in both groups (-2.2% for MoM; -3.9% for MoP) and zones 3 and 4 a gain in both groups (+0.1% for MoM; +3.3% for MoP). No other between-group differences were detected. When adjusting for BMD of the contralateral hip, no differences in BMD were observed. The only significant differences in functional scores at two years were higher UCLA activity (7.3 (sd 1.2) vs 6.1 (sd 1.5); p = 0.01) and RAND-36 physical function (82.1 (sd 13.0) vs 64.5 (sd 26.4); p = 0.02) for MoM bearings versus MoP. One revision was performed in the MoM group, for aseptic acetabular loosening at 11 months. CONCLUSIONS: When controlling for systemic BMD, there were no significant differences between MoM and MoP groups in peri-acetabular BMD. However, increasing reports of adverse tissue reactions with large head MoM THR have restricted the use of the monoblock acetabular component to resurfacing only.

Bone density is higher in cam-type femoroacetabular impingement deformities compared to normal subchondral bone.

OBJECTIVE: Cam-type femoroacetabular impingement (FAI) deformities have been associated with early osteoarthritic degeneration of the hip. Degeneration depends on many factors such as joint morphology and dynamics of motion. Bone mineral density (BMD) appears to be a manifestation of the above, and may be a potentiator. Thus the goal of this study was to assess subchondral BMD of cam deformities in symptomatic and asymptomatic FAI subjects, and to compare to normal controls. METHODS: Subjects undergoing surgical correction of a symptomatic cam-type deformity were recruited ("Surgical"). Asymptomatic volunteers were also recruited and classified as normal ("Control") or having a deformity ("Bump") based on their alpha angle measurement. All subjects (n = 12 per group) underwent computed tomography (CT) with a calibration phantom. BMD was determined in volumes of interest around the femoral head and neck to a depth of 5 mm. BMD was compared between groups in each section using spine BMD as a covariate. RESULTS: No differences were seen between groups in the peripheral bearing surface. The Bump group exhibited higher BMD than Controls within the head/neck junction (P < 0.05). When compared to normal subchondral bone in the peripheral level of Controls, BMD in the deformity was up to 78% higher in Bump subjects and up to 47% higher in Surgical subjects (P < 0.05). CONCLUSION: Subchondral BMD of cam deformities is higher than that of normal subchondral bone in the peripheral region of the femoral head, regardless of symptom status. The expected increased subchondral stiffness may increase contact stresses in the joint tissues leading to accelerated degeneration.

Increased acetabular subchondral bone density is associated with cam-type femoroacetabular impingement.

OBJECTIVE: Femoroacetabular impingement (FAI) has been associated with significant acetabular cartilage damage and subsequent degenerative arthritis. Subchondral bone, often neglected in osteoarthritis studies, may play an important role in the degenerative cascade. Hence the goal of this study was to assess acetabular subchondral bone mineral density (BMD) in subjects with asymptomatic or symptomatic cam deformities compared to normal control subjects. The relationship between BMD and the alpha angle, a quantitative measure of the deformity, was also analyzed. METHODS: Patients diagnosed with symptomatic cam FAI were recruited ('Surgical') as well as subjects from the general asymptomatic population, classified from CT imaging as normal ('Control') or having a cam deformity ('Bump') based on their alpha angle measurement. There were 12 subjects in each group. All subjects underwent a CT scan with a calibration phantom. BMD was calculated in regions of interest around the acetabulum from CT image intensity and the phantom calibration. BMD was compared between groups using spine BMD as a covariate. The relationship between BMD and alpha angle was assessed by linear regression. RESULTS: In the antero-superior regions bone density was 15-34% higher in the Bump group (P < 0.05) and 14-38% higher in the Surgical group (P < 0.05) compared to Controls. BMD correlated positively with the alpha angle measurements (R(2) = 0.44, P < 0.001). CONCLUSION: BMD was elevated in subjects with cam-type deformities, with the severity of the deformity more correlative than symptom status. Similarities to the symptomatic group suggest that hips with an asymptomatic deformity may already be in early stages of joint degeneration.