Silicone-geranium essential oil blend for long-term antifouling coatings.

This study explores the potential of geranium essential oil as a natural solution for combating marine biofouling, addressing the environmental concerns associated with commercial antifouling coatings. Compounds with bactericidal activities were identified by 13Carbon nuclear magnetic resonance (13C NMR). Thermogravimetric analysis (TGA) revealed minimal impact on film thermal stability, maintaining suitability for antifouling applications. The addition of essential oil induced changes in the morphology of the film and Fourier transform infrared spectroscopy (FTIR) analysis indicated that oil remained within the film. Optical microscopy showed an increase in coating porosity after immersion in a marine environment. A total of 18 bacterial colonies were isolated, with Psychrobacter adeliensis and Shewanella algidipiscicola being the predominant biofilm-forming species. The geranium essential oil-based coating demonstrated the ability to reduce the formation of Psychrobacter adeliensis biofilms and effectively inhibit macrofouling adhesion for a duration of 11 months.

Participation of Zip3, a ZIP domain-containing protein, in stress response and virulence in Cryptococcus gattii.

Cryptococcus gattii is an etiologic agent of cryptococcosis, a potentially fatal disease that affects humans and animals. The successful infection of mammalian hosts by cryptococcal cells relies on their ability to infect and survive in macrophages. Such phagocytic cells present a hostile environment to intracellular pathogens via the production of reactive nitrogen and oxygen species, as well as low pH and reduced nutrient bioavailability. To overcome the low-metal environment found during infection, fungal pathogens express high-affinity transporters, including members of the ZIP family. Previously, we determined that functional zinc uptake driven by Zip1 and Zip2 is necessary for full C.gattiivirulence. Here, we characterized the ZIP3 gene of C. gattii, an ortholog of the Saccharomyces cerevisiae ATX2, which codes a manganese transporter localized to the membrane of the Golgi apparatus. Cryptococcal cells lacking Zip3 were tolerant to toxic concentrations of manganese and had imbalanced expression of intracellular metal transporters, such as the vacuolar Pmc1 and Vcx1, as well as the Golgi Pmr1. Moreover, null mutants of the ZIP3 gene displayed higher sensitivity to reactive oxygen species (ROS) and substantial alteration in the expression of ROS-detoxifying enzyme-coding genes. In line with these phenotypes, cryptococcal cells displayed decreased virulence in a non-vertebrate model of cryptococcosis. Furthermore, we found that the ZIP3 null mutant strain displayed decreased melanization and secretion of the major capsular component glucuronoxylomannan, as well as an altered extracellular vesicle dimensions profile. Collectively, our data suggest that Zip3 activity impacts the physiology, and consequently, several virulence traits of C. gattii.

High-resolution continuum source graphite furnace atomic absorption spectrometry for screening elemental impurities in drugs to adhere to the new international guidelines.

New guidelines for the limits of elemental impurities in drug products were introduced by the International Council for Harmonization in 2014. While the guidelines define a limit for each element, the complete quantification of the 24 elements included is, in fact, unnecessary. An accurate "pass/fail" test to determine whether the threshold was exceeded or not could be valuable in this context. In this study, a screening procedure using the features of high-resolution continuum source graphite furnace atomic absorption spectrometry for the evaluation of 12 elements in three different drugs was developed. The three-dimensional absorbance spectrum including time and wavelength in the vicinity of the main line of the element allows for a pass/fail decision related to the presence or absence of the element in the sample. Additionally, the bi-dimensional absorbance-wavelength spectrum defines the elements captured in the window when additional peaks are seen in the spectrum. The analysis of the selected drugs included sample digestion, the definition of pyrolysis and atomization temperatures, determination of the limit of detection and other validation parameters for each element. The evaluation of the spectra, both three- and bi-dimensional, revealed that only three elements, Cr, Ni, and Cu, were present in the samples in amounts above the LOD and therefore "fail" in the test. Nevertheless, they were quantified, and the analysis revealed that their levels were below the permitted daily exposure, which are at least 6 times higher than the LOD of the selected elements. Operating in a routine mode, the proposed method is a good option for the evaluation of elemental impurities in drug active ingredients or drug final products.

Changes in biochemical parameters in rabbits blood after oral exposure to diphenyl diselenide for long periods.

The concept that selenium-containing molecules may be better antioxidants than classical antioxidants, has led to the design of synthetic organoselenium compounds. The present study was conducted to evaluate the potential toxicity of long time oral exposure to diphenyl diselenide (PhSe)2 in rabbits. Male adult New Zealand rabbits were divided into four groups, group I served as control; groups II, III and IV received 0.3, 3.0 and 30 ppm of (PhSe)2 pulverized in the chow for 8 months. A number of parameters were examined in blood as indicators of toxicity, including delta-aminolevulinate dehydratase (delta-ALA-D), catalase, glutathione peroxidase (GPx), alanine aminotransferase (ALT), aspartate aminotransferase (AST), urea, creatinine, TBARS, non-protein-SH, ascorbic acid and selenium. The results demonstrated that 6 and 8 months of 30 ppm (PhSe)2 intake caused a significant increase in blood delta-ALA-D activity. Erythrocyte non-protein thiol levels were significantly increased after 2 months of 30 ppm (PhSe)2 intake and then return to control levels after prolonged periods of intake. Ingestion of 3.0 ppm of (PhSe)2 for 8 months significantly increased catalase activity in erythrocytes. Conversely, no alterations in GPx, ALT, AST, TBARS and selenium levels were observed in rabbit serum, conversely, selenium levels in peri-renal adipose tissue were significantly increased after 8 months of 30 ppm (PhSe)2 intake, indicating its great lipophylicity. The present results suggest that diphenyl diselenide was not hepato- or renotoxic for rabbits, but caused some biochemical alterations that can be related to some pro-oxidant activity of the compound (particularly the reduction in Vitamin C).

Arsenic release from glass containers by action of intravenous nutrition formulation constituents.

Pharmacopoeias prescribe tests to determine the levels of arsenic in raw materials and glass containers. In this study, glass ampoules for injectables containing individually the main components of intravenous nutrition formulations were submitted to the hydrolytic resistance test by heating at 121 degrees C for 30 min. As(V) and As(III) levels in these solutions after heating were determined by hydride generation atomic absorption spectrometry. The arsenic content of substances used in these formulations was previously determined, as well as the arsenic content of the glass containers. The results showed that raw substances as well as glass containers contain arsenic. Moreover, arsenic is released during the heating (hydrolytic resistance test). However, the amount released and the arsenic species present in solution depend on the solution composition. While As(V) was the predominant specie in glass, solutions containing reducing substances such as glucose and vitamins had As(III) in higher concentration. Therefore, arsenic is released from glass containers during the heating for sterilization, and reacts with formulation constituents depending on their reducing properties.

Arsenic species in solutions for parenteral nutrition.

BACKGROUND: In spite of its high toxicity, arsenic is a common contaminant in pharmaceuticals. This is stated by pharmacopoeias' monographs where it is not generically included with other heavy metals, but has its own specifications. Arsenic should not exceed 0.1 mg/L in most pharmaceutical products for IV administration. This limit, however, was established without taking into consideration the specific arsenic species which contribute to this amount. In this work, the presence of arsenite and arsenate species in solutions of amino acids, salts, vitamins, and lipids commercialized for IV administration was investigated. METHODS: The measurements were done by hydride generation atomic absorption spectrometry. RESULTS: The results showed that all commercial formulations contain both arsenic species in some level; however, the total arsenic content exceeded the allowed limit in only a few samples. Calcium gluconate, sodium bicarbonate, heparin, and vitamin solutions were the most contaminated, presenting total arsenic concentration ranging from 62 to 249 microg/L. The most important finding, however, was the different ratios As(V)/As(III) among the formulations. Whereas practically only As(V) was found in ampoules containing water for injection and salt solutions (NaCl, KC1, phosphates), As(III) predominated in solutions of vitamins, gluconate, and glucose. As these are reducing substances, we investigated the possibility of their reaction with As(V) and its conversion into As(III). The heating of As(V) in the presence of gluconate, glucose, ascorbic acid, methionine, isoleucine, sodium chloride, and pure water, in autoclave for 15 minutes, showed that, whereas no As(III) was found in pure water and sodium chloride solution, approximately 50% of As(V) was converted into As(III) in the remainder of the solutions. CONCLUSIONS: The results showed that As(V), the main species in these formulations, may be converted into As(III), depending on the presence of reducing substances among the formulation constituents.

Critical evaluation of the standard hydrolytic resistance test for glasses used for containers for blood and parenteral formulations.

As prescribed by pharmacopoeias, containers should meet certain condition of stability to be used for pharmaceutical products. Glass containers are classified according to their resistance to chemical attack, a test executed by heating the glass in contact with water for 30 min at 121 degrees C. The USP powdered glass test for glass containers was applied to different kinds of glasses used as containers for parenteral formulations. In this experiment not only the released alkalinity was measured but also the release of glass constituents: silicate, borate, sodium, and aluminum, and also the release of some impurities as copper and lead. The USP powdered glass test was also carried out with glass ampoules, clear and amber, in the presence of solution of some inorganic salts, NaCl, KCl, CaCl2, MgCl2, NaHCO3, NaH2PO4, KH2PO4, and sodium gluconate, citric acid and glucose. The results showed that even when releasing very low alkalinity, glasses also released their constituents, in concentration ranges from 8.8 to 33 mg/l for silicate, 0.9 to 6.9 mg/l for borate, 3 to 37 for mg/l for sodium and 0.5 to 2.4 mg/l for aluminum. More expressive results were found, however, for the tests done with solutions instead of pure water. The tests showed that, for most of the solutions, while the measured alkalinity was very low, high levels of the other constituents were found. Basic solutions of bicarbonate and gluconate presented the higher levels of all investigated constituents, confirming the ability of basic solutions to attack and dissolve the glass network. Glucose and citric acid interacted with the glass surface, selectively extracting aluminum, copper, and lead. Whereas silicate, borate and sodium found in these solutions were at levels similar to those found with pure water, the aluminum level was almost 20 times higher. This specific action of citrate and glucose could be related to their metal-complexing ability. The results indicate that even so-called "chemical-resistant glasses," as measured by the hydrolytic resistance test, react with many substances when packaged in contact with them. The hydrolytic resistance test, when used as the sole measure of potential drug-container compatibility, is not reliable.

Influence of the glass packing on the contamination of pharmaceutical products by aluminium. Part III: Interaction container-chemicals during the heating for sterilisation.

The interaction of chemicals with the container materials during heating for sterilisation was investigated, storing the components of parenteral nutrition solutions individually in sealed glass ampoules and in contact with a rubber stopper, and heating the system at 121 degrees C for 30 min. Subsequently, the aluminium content of the solutions was measured by atomic absorption spectrometry (AAS). The assay was also carried out with acids, alkalis and some complexing agents for Al. The containers were decomposed and also assayed for aluminium. 30 different commercial solutions for parenteral nutrition, stored either in glass or in plastic containers, were assayed measuring the aluminium present in the solutions and in the container materials. The results of all investigated container materials revealed an aluminium content of 1.57% Al in glass, 0.05% in plastic and 4.54% in rubber. The sterilisation procedure showed that even pure water was able to extract Al from glass and rubber, 22.5 +/- 13.3 microg/L and 79.4 +/- 22.7 microg/L respectively, while from plastic the aluminium leached was insignificant. The Al released from glass ampoules laid between 20 microg/L for leucine, ornithine and lysine solutions and 1500 microg/L for solutions of basic phosphates and bicarbonate; from rubber stoppers it reached levels over 500 microg/L for cysteine, aspartic acid, glutamic acid and cystine solutions. Ion-exchange properties and influence of pH can explain the interaction of glass with some chemicals (salts, acids and alkalis), but only an affinity for aluminium could explain the action of some amino acids and other chemicals, as albumin and heparin, on glass and rubber, considering the aluminium release. Experiments with complexing agents for Al allowed to conclude that the higher the stability constant of the complex, the higher the Al release from the container material.

Contribution of the raw material to the aluminum contamination in parenterals.

BACKGROUND: The extent of aluminum contamination in parenteral nutrition solutions was measured in 35 different commercial products, including amino acids, electrolytes, glucose, lipids, vitamins trace elements, and albumin. The extent of aluminum contamination in substances used as raw material for preparation of parenterals was also measured. Chemicals from different manufacturers and of different quality grades were analyzed individually. METHODS: The measurements were done by atomic absorption spectrometry. RESULTS: The results showed that the same product might have different aluminum content depending on the manufacturer, either for commercial formulations or substances. The highest contaminated chemicals included cystine, NaOH, vitamin C, biotin, gluconate, and Fe and Cr salts. The lowest contaminated chemicals included lipids, apolar amino acids, glucose, HCI, acetic acid, KCl, NaCl, and heparin. Among commercial products, the major contamination rates appeared in calcium gluconate, followed by trace elements, some vitamins, bicarbonate, phosphates salts, and heparin. CONCLUSIONS: Comparing the aluminum in commercial products and substances, it can be concluded that the contamination may occur in parenterals because aluminum is present naturally in the chemicals. However, when the composition and concentration of the parenteral solution are considered, the contamination of calcium gluconate, trace elements, some vitamins, phosphates, bicarbonate, and heparin cannot be related only to the raw substances. The aluminum level present in these commercial formulations is too high to come only from the substances; therefore, it is possible that one of the steps of the manufacturing procedure is responsible for elevating the contamination of these products.