ABSTRACT
The mechanical properties of polylactic acid (PLA), polyethylene terephthalate glycol (PETG), and PLA/PETG structures manufactured using the multi-material additive manufacturing (MMAM) method were studied in this work. Material extrusion additive manufacturing was used to print PLA/PETG samples with various PLA and PETG layer numbers. By varying the top and bottom layer numbers of two thermoplastics, the effect of layer number on the mechanical properties of 3D-printed structures was investigated. The chemical and thermal characteristics of PLA and PETG were investigated using Fourier transform infrared spectroscopy and differential scanning calorimetry. Tensile and flexural strength of 3D-printed PLA, PETG, and PLA/PETG samples were determined using tensile and three-point bending tests. The fracture surfaces of the samples were evaluated using optical microscopy. The results indicated that multi-material part containing 13 layers of PLA and 3 layers of PETG exhibited the highest ultimate tensile strength (65.4 MPa) and a good flexural strength (91.4 MPa). MMAM was discovered to be a viable way for producing PLA/PETG materials with great mechanical performance.
ABSTRACT
The COVID-19 pandemic has hugely affected the textile and apparel industry. Besides the negative impact due to supply chain disruptions, drop in demand, liquidity problems, and overstocking, this pandemic was found to be a window of opportunity since it accelerated the ongoing digitalization trends and the use of functional materials in the textile industry. This review paper covers the development of smart and advanced textiles that emerged as a response to the outbreak of SARS-CoV-2. We extensively cover the advancements in developing smart textiles that enable monitoring and sensing through electrospun nanofibers and nanogenerators. Additionally, we focus on improving medical textiles mainly through enhanced antiviral capabilities, which play a crucial role in pandemic prevention, protection, and control. We summarize the challenges that arise from personal protective equipment (PPE) disposal and finally give an overview of new smart textile-based products that emerged in the markets related to the control and spread reduction of SARS-CoV-2.
ABSTRACT
The main objective of this study was to fabricate poly (ε-caprolactone) (PCL)-based auxetic nanofiber membranes and characterize them for their mechanical and physicochemical properties. As a first step, the PCL nanofibers were fabricated by electrospinning with two different thicknesses of 40µm (called PCL thin membrane) and 180µm (called PCL thick membrane). In the second step, they were tailored into auxetic patterns using femtosecond laser cut technique. The physicochemical and mechanical properties of the auxetic nanofiber membranes were studied and compared with the conventional electrospun PCL nanofibers (non-auxetic nanofiber membranes) as a control. The results showed that there were no significant changes observed among them in terms of their chemical functionality and thermal property. However, there was a notable difference observed in the mechanical properties. For instance, the thin auxetic nanofiber membrane showed the magnitude of elongation almost ten times higher than the control, which clearly demonstrates the high flexibility of auxetic nanofiber membranes. This is because that the auxetic nanofiber membranes have lesser rigidity than the control nanofibers under the same load which could be due to the rotational motion of the auxetic structures. The major finding of this study is that the auxetic PCL nanofiber membranes are highly flexible (10-fold higher elongation capacity than the conventional PCL nanofibers) and have tunable mechanical properties. Therefore, the auxetic PCL nanofiber membranes may serve as a potent material in various biomedical applications, in particular, tissue engineering where scaffolds with mechanical cues play a major role.
