Developing a bioink for single-step deposition and maturation of human epidermis.

Patients with severe burns, which cause extensive damage to their skin, require rapid intervention to prevent life-threatening hypothermia, infection, and fluid loss. Current treatments typically involve surgical excision of the burned skin and reconstruction of the wound with the aid of skin autografts. However, there is a lack of donor site in the most severe cases. While alternative treatments such as cultured epithelial autografts and "spray-on" skin can allow much smaller donor tissues to be used (and hence reduce donor site morbidity), they present their own challenges in terms of fragility of the tissues and control of the cell deposition, respectively. Recent advances in bioprinting technology have led researchers to explore its use to fabricate skin grafts, which depend on several factors, including appropriate bioinks, cell types, and printability. In this work, we describe a collagen-based bioink that allows the deposition of a contiguous layer of the keratinocytes directly onto the wound. Special attention was given to the intended clinical workflow. For example, since media changes are not feasible once the bioink is deposited onto the patient, we first developed a media formulation designed to permit a single deposition step and promote self-organization of the cells into the epidermis. Using a collagen-based dermal template populated with dermal fibroblasts, we demonstrated by immunofluorescence staining that the resulting epidermis recapitulates the features of natural skin in expressing p63 (stem cell marker), Ki67 and keratin 14 (proliferation markers), filaggrin and keratin 10 (keratinocyte differentiation and barrier function markers), and collagen type IV (basement membrane protein involved in adherence of the epidermis to the dermis). While further tests are still required to verify its utility as a burn treatment, based on the results we have achieved thus far, we believe that our current protocol can already produce donor-specific model for testing purposes.

Broad spectrum antimicrobial PDMS-based biomaterial for catheter fabrication.

BACKGROUND: In addition to the widespread use of antibiotics in healthcare settings, the current COVID-19 pandemic has escalated the emergence of antibiotic resistance. Nosocomial infections among hospitalized patients is a leading site for such resistant microbial colonization due to prolonged use of invasive devices and antibiotics in therapies. Invasive medical devices, especially catheters, are prone to infections that could accelerate the development of resistant microbes. Often, catheters - particularly urinary catheters - are prone to high infection rates. Antibiotic-coated catheters can reduce infection rates and although commercially available, are limited in efficacy and choices. METHODS: Herein, a novel and facile method to fabricate PMDS-based biomaterial for the development of antimicrobial eluting catheters is presented. Silicone based organic polymer polydimethylsiloxane (PDMS) was used to prepare a biomaterial containing novel polymeric imidazolium antimicrobial compound. RESULTS: It was found that the PDMS-based biomaterials could eradicate microbial colonization even after 60 days in culture with continuous microbial challenge, be recycled over multiple uses, stored at room temperature for long-term usage and importantly is biocompatible. CONCLUSION: The PDMS-based biomaterial displayed biocidal functionality on microbes of clinical origin, which form major threats in hospital acquired infections.

A fluid-supported 3D hydrogel bioprinting method.

Hydrogels are used in many biomedical applications, including regenerative medicine and surgical training phantoms. However, the ability to shape these materials into complex anatomical structures using additive manufacturing is limited in part by their low mechanical stiffness. We developed a hydrogel 3D printer, that projects patterns directly onto a thin layer of fluid-supported hydrogel precursor, which serves as a floating, liquid projection screen. This approach avoids inadvertent adhesion that affects typical resin-based 3D printers, and enables fast, continuous printing. As a consequence, we can print smooth objects free of layering artifacts, at rates of 200 mm/h along the Z-axis. We demonstrate the versatility of our approach by printing various complex structures, including free-standing channel networks with 500 µm-thick walls, using hydrogels with a wide range of stiffness from 7 kPa to more than 4 MPa. Lastly, because the printer features a free surface, we combined it with an extruder to perform multi-material printing. We use this strategy to create centimeter-scale, cell-laden hydrogels containing channels, that help address the key nutrient supply problem in bioprinting.

Microfluidic-prepared, monodisperse, X-ray-visible, embolic microspheres for non-oncological embolization applications.

Embolotherapy using particle embolics is normally performed with exogenous contrast to assist in visualization. However, the exact location of the embolics cannot be identified after contrast washout. We developed a novel, pseudo-check valve-integrated microfluidic device, that partitions barium- impregnated alginate from crosslinking solution, thereby preventing nozzle failure. This enables rapid and continuous generation of inherently X-ray-visible embolic microspheres (XEMs) with uniform size. The XEMs are visible under clinical X-ray and cone beam CT both in vitro and in vivo. In particular, we demonstrated the embolization properties of these XEMs in large animals, performing direct intra- and post-procedural assessment of embolic delivery. The persistent radiopacity of these XEMs enables real-time evaluation of embolization precision and offers great promise for non-invasive follow-up examination without exogenous contrast. We also demonstrated that bariatric arterial embolization with XEMs significantly suppresses weight gain in swine, as an example of a non-oncological application of embolotherapy.

Bariatric Arterial Embolization with Calibrated Radiopaque Microspheres and an Antireflux Catheter Suppresses Weight Gain and Appetite-Stimulating Hormones in Swine.

PURPOSE: To examine safety and efficacy of bariatric arterial embolization (BAE) with x-ray-visible embolic microspheres (XEMs) and an antireflux catheter in swine. MATERIAL AND METHODS: BAE with selective infusion of XEMs (n = 6) or saline (n = 4, control) into gastric fundal arteries was performed under x-ray guidance. Weight and plasma hormone levels were measured at baseline and weekly for 4 weeks after embolization. Cone-beam CT images were acquired immediately after embolization and weekly for 4 weeks. Hormone-expressing cells in the stomach were assessed by immunohistochemical staining. RESULTS: BAE pigs lost weight 1 week after embolization followed by significantly impaired weight gain relative to control animals (14.3% vs 20.9% at 4 weeks, P = .03). Plasma ghrelin levels were significantly lower in BAE pigs than in control animals (1,221.6 pg/mL vs 1,706.2 pg/mL at 4 weeks, P < .01). XEMs were visible on x-ray and cone-beam CT during embolization, and radiopacity persisted over 4 weeks (165.5 HU at week 1 vs 158.5 HU at week 4, P = .9). Superficial mucosal ulcerations were noted in 1 of 6 BAE animals. Ghrelin-expressing cell counts were significantly lower in the gastric fundus (17.7 vs 36.8, P < .00001) and antrum (24.2 vs 46.3, P < .0001) of BAE pigs compared with control animals. Gastrin-expressing cell counts were markedly reduced in BAE pigs relative to control animals (98.5 vs 127.0, P < .02). Trichrome staining demonstrated significantly more fibrosis in BAE animals compared with control animals (13.8% vs 8.7%, P < .0001). CONCLUSIONS: XEMs enabled direct visualization of embolic material during and after embolization. BAE with XEMs and antireflux microcatheters was safe and effective.

Creation of stable and strictly regulated enzyme switch for signal-on immunodetection of various small antigens.

Recently, we reported a fusion-protein-based immunodetection system comprising the two domains of an antibody variable region as the detectors, each tethered to an interface mutant ß-glucuronidase (GUSm) as the reporter, for detecting small molecules via dimerization of dimer activation. However, the poor stability of GUSm and background signal propagation possibly due to spontaneous proteolysis undermined its performance. To solve these problems, we attempted thermostabilization of GUSm by using a previously isolated thermostable mutant GUSIV5 as a backbone. After screening several interface mutants, we selected one with M516K/Y517W mutation because it exhibited higher activity after dimerization than the wild-type GUS, while maintaining very low background activity. By using this improved immunosensor, we achieved a two-fold improvement in terms of sensitivity in the detection of 4-hydroxy-3-nitrophenyl acetyl. Moreover, by constructing a new biosensor tethered to a nanobody for caffeine as the detector, we could achieve noncompetitive signal-on detection of caffeine in a practically useful concentration range.

Fluorescence spectroscopic detection and measurement of single telomere molecules.

Telomeres are the end-caps of chromosomes that serve to protect the integrity of the genome. Below certain critical lengths, the telomeres can no longer fulfill their protective function, and chromosomal instability ensues. Telomeres shorten during normal cell division due to the end replication problem and are implicated in the development of various aging-associated diseases, including cancer. Telomere length has the potential to serve as a useful biomarker in the field of aging and cancer. However, existing methods of telomere measurement are either too laborious, unable to provide absolute measurement of individual telomere lengths, or limited to certain chromosomes or cell types. Here, we describe an easy single-molecule, fluorescence spectroscopic method for measuring the length of telomeres that permits the profiling of absolute telomere lengths in any DNA sample. We have demonstrated the accurate detection of telomeres as short as 100 bp using cloned telomere standards, and have profiled telomere lengths in human cancer cell lines and primary cells. Since this method allows direct comparison between samples, it could greatly improve the clinical utility of telomere biomarkers.

Direct interrogation of DNA content distribution in nanoparticles by a novel microfluidics-based single-particle analysis.

Nonviral gene delivery holds great promise not just as a safer alternative to viral vectors in traditional gene therapy applications, but also for regenerative medicine, induction of pluripotency in somatic cells, and RNA interference for gene silencing. Although it continues to be an active area of research, there remain many challenges to the rational design of vectors. Among these, the inability to characterize the composition of nanoparticles and its distribution has made it difficult to probe the mechanism of gene transfection process, since differences in the nanoparticle-mediated transfection exist even when the same vector is used. There is a lack of sensitive methods that allow for full characterization of DNA content in single nanoparticles and its distribution among particles in the same preparation. Here we report a novel spectroscopic approach that is capable of interrogating nanoparticles on a particle-by-particle basis. Using PEI/DNA and PEI-g-PEG/DNA nanoparticles as examples, we have shown that the distribution of DNA content among these nanoparticles was relatively narrow, with the average numbers of DNA of 4.8 and 6.7 per particle, respectively, in PEI/DNA and PEI-g-PEG/DNA nanoparticles. This analysis enables a more accurate description of DNA content in polycation/DNA nanoparticles. It paves the way toward comparative assessments of various types of gene carriers and provides insights into bridging the efficiency gap between viral and nonviral vehicles.

PDMS-glass bonding using grafted polymeric adhesive--alternative process flow for compatibility with patterned biological molecules.

We report a novel modification of silicone elastomer polydimethylsiloxane (PDMS) with a polymer graft that allows interfacial bonding between an elastomer and glass substrate to be performed without exposure of the substrate to harsh treatment conditions, such as oxygen plasma. Organic molecules can thus be patterned within microfluidic channels and still remain functional post-bonding. In addition, after polymer grafting the PDMS can be stored in a desiccator for at least 40 days, and activated upon exposure to acidic buffer for bonding. The bonded devices remain fully bonded in excess of 80 psi driving pressure, with no signs of compromise to the bond integrity. Finally, we demonstrate the compatibility of our method with biological molecules using a proof-of-concept DNA sensing device, in which fluorescently-labelled DNA targets are successfully captured by a patterned probe in a device sealed using our method, while the pattern on a plasma-treated device was completely destroyed. Therefore, this method provides a much-needed alternative bonding process for incorporation of biological molecules in microfluidic devices.

Efficient delivery of Bcl-2-targeted siRNA using cationic polymer nanoparticles: downregulating mRNA expression level and sensitizing cancer cells to anticancer drug.

In this study, cationic nanoparticles self-assembled from the amphiphilic copolymer poly(N-methyldietheneamine sebacate)-co-[(cholesteryl oxocarbonylamido ethyl) methyl bis(ethylene) ammonium bromide] sebacate) (P(MDS-co-CES) were synthesized and used to deliver Bcl-2 targeted siRNA into HepG2, HeLa and MDA-MB-231 cell lines, and downregulate Bcl-2 mRNA expression levels. Confocal microscopic studies show that the nanoparticles were able to complex with siRNA and deliver it inside the cells efficiently, but siRNA was easily dissociated from the complexes in the cytoplasm for its biological functions. Bcl-2 mRNA expression levels as low as 10% were achieved after treatment with nanoparticle/siRNA complexes. The downregulation efficiency of Bcl-2 mRNA level was similar to that mediated by Lipofectamine but higher than that induced by PEI. PEG was also conjugated to siRNA via a cleavable disulfide bond, and nanoparticle/siRNA-PEG complexes showed no significant protein adsorption as compared with 26 and 17% for blank nanoparticles and nanoparticle/siRNA complexes, respectively. The presence of serum caused slight aggregation of nanoparticle/siRNA or nanoparticle/siRNA-PEG complexes. However, the size of the complexes was still below 250 nm after being incubated in PBS containing 10% serum for 4 h. On the other hand, PEGylated siRNA delivered by the nanoparticles downregulated Bcl-2 mRNA expression level in the cells as efficiently as unmodified siRNA. Bcl-2 protein was also downregulated efficiently by nanoparticle/siRNA complexes in all cell lines tested. The downregulation of Bcl-2 mRNA or Bcl-2 protein did not show significant cell death in the tested siRNA and polymer concentration range. However, the delivery of siRNA sensitized HeLa cells to paclitaxel treatment, yielding significant improvement over the untreated cells (p<0.05). These cationic nanoparticles may be potentially employed to downregulate Bcl-2 expression and sensitize cancer cells to anticancer drugs for more efficient chemotherapy.

Three-photon absorption in semiconductor quantum dots: experiment.

The four-band model, derived under the effective-mass approximation for cubic semiconductor quantum dots (QDs), is compared with experimental measurements on frequency degenerate three-photon absorption (3PA) in CdSe QDs and ZnS QDs. Qualitatively, the model provides the correct prediction on the magnitude of the 3PA cross-sections, which are in the range from 10(-79) to 10(-77) cm(6)s(2)photon(-2) in the light frequency region of interest. More noticeably, the theoretical conclusion of an increasing tendency in the 3PA cross-sections with increasing dot-size is in agreement with the experiment. The discrepancy is also found for smaller QDs (dot-radius is less than one-third of the exciton Bohr radius), which is attributed to neglecting the mixing among the three valence bands in the theory.

The self-assembly of biodegradable cationic polymer micelles as vectors for gene transfection.

Cationic micelles self-assembled from a biodegradable amphiphilic copolymer, poly{(N-methyldietheneamine sebacate)-co-[(cholesteryl oxocarbonylamido ethyl) methyl bis(ethylene) ammonium bromide] sebacate} (P(MDS-co-CES)) have recently been reported for efficient gene delivery and co-delivery of drug and nucleic acid. In this study, poly(ethylene glycol) (PEG) of various molecular weights (Mn=550, 1100 and 2000) was conjugated to P(MDS-co-CES) having different cholesterol grafting degrees to improve the stability of micelle/DNA complexes in the blood for systemic in vivo gene delivery. DNA binding ability, gene transfection efficiency and cytotoxicity of P(MDS-co-CES), PMDS, PEGylated PMDS and PEGylated P(MDS-co-CES) micelles were studied and compared. As with P(MDS-co-CES), PEG-P(MDS-co-CES) polymers could also self-assemble into stable micelles of small size. However, PMDS and PEG-PMDS without cholesterol could not form stable micelles but formed large particles. PEGylation of polymers significantly decreased their gene transfection efficiency in HEK293, HepG2, HeLa, MDA-MB-231 and 4T1 cells. However, increasing N/P ratio promoted gene transfection. An increased cholesterol grafting degree led to greater gene expression level possibly because of the more stable core-shell structure of the micelles. PEG550-P(MDS-co-CES) micelles induced high gene transfection level, comparable to that provided by P(MDS-co-CES) micelles. PEGylated polymers were much less cytotoxic than P(MDS-co-CES). PEGylated P(MDS-co-CES) micelles may provide a promising non-viral vector for systemic in vivo gene delivery.