Staining- and aging-dependent changes in color and translucency of 3D-printed resin-modified ceramics.

PURPOSE: To evaluate staining- and aging-dependent changes in the color and translucency of 3D-printed resin-modified ceramics (RMC). METHODS: Specimens (n= 5 per condition and material) were fabricated from test materials: Permanent Crown Resin (PCR), Crowntec (CT), Vita Enamic (VE) and Tetric CAD (TC). Specimens were stained in wine, coffee, tea, and water (control) and exposed to artificial accelerated aging (AAA). Color measurements were obtained using a spectrophotometer at baseline (T0) and at 3.5 (T1) and 7 (T2) days after immersion. For AAA, measurements were obtained at baseline (T0) and after exposure to controlled irradiance of 150 kJ/m² (T1) and 300 kJ/m² (T2). Mean and standard deviations were calculated on CIEDE2000 color differences (ΔE00), translucency parameter (TP00) and treatment-dependent changes in the translucency parameter (ΔTP0 0). Differences between materials and test conditions were tested by one-way ANOVA (α= 0.05). Results were additionally interpreted using visual color difference thresholds in dentistry ΔE00= 0.8 for the 50:50 perceptibility threshold (PT) and ΔE00= 1.8 for the 50:50 acceptability threshold (AT). ΔTP00 values were interpreted using 5058;50 TPT00= 0.6 and 50:0% TAT00= 2.6. RESULTS: Statistically significant differences were found among the materials when exposed to the different test conditions. At the T0-T1 time interval, the highest color difference was found with wine (0.1-2.2) on all materials except CT, which showed the highest ΔE00 with AAA (2.5). The second highest color differences were obtained upon exposure to AAA (0.2-2.5) and tea (0.5-1.1). The TP00 at baseline ranged from 5.1 to 9.8. Significant differences in ΔTP00 were found among the tested materials and staining/aging conditions, but no significant differences were found among the staining/aging intervals (T0-T1, T0-T2 and T1-T2). CLINICAL SIGNIFICANCE: Staining- and artificial aging-dependent changes of 3D-printed and milled resin modified ceramics used for definitive restorations could represent a challenge in terms of restoration acceptability or dissatisfaction. Staining and aging conditions produced significant color changes, while translucency changes were not significant.

Fracture resistance of cement-retained and screw-cement-retained milled posterior crowns with screw-access hole preparations before and after firing: An in vitro study.

STATEMENT OF PROBLEM: When a cement-retained lithium disilicate crown needs to be removed, perforation is needed to reach the abutment screw. How this process affects its strength is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the fracture strength of milled lithium disilicate implant crowns with screw-access holes created before and after the firing stages. MATERIAL AND METHODS: Nine implant replicas with stock abutments were embedded in acrylic resin. Forty-five lithium disilicate (IPS e.max CAD) crowns were designed, milled, and divided into groups. The control group had no screw access, the blue state group had the screw access created in the intermediate phase of the ceramic, and the postfiring group had the screw access created after firing. The crowns were cemented with a self-adhesive resin cement, placed in an incubator for 24 hours and then thermocycled. The screw-access holes were sealed with composite resin. The crowns were loaded to failure with a universal testing machine using a 1- mm-diameter ball at a crosshead speed of 0.5 mm/min and a 5-kN cell load. Data were analyzed by ANOVA and the Tukey post hoc test (α=.05). RESULTS: Screw-access holes created before and after firing stages had a significant effect on the fracture resistance of lithium disilicate crowns (P=.002). No difference in fracture resistance was observed between the control group and the blue state group (P>.05), while the fracture resistance of the postfiring group was significantly lower than that of the control group and the blue state group (P<.05). CONCLUSIONS: The fracture strength of lithium disilicate crowns was not affected by a screw-access hole created during the blue state of the ceramic followed by repair with composite resin. Creating a screw-access hole after firing the ceramic reduced fracture strength.

Wear Resistance of 3D Printed and Prefabricated Denture Teeth Opposing Zirconia.

PURPOSE: To evaluate the wear resistance of a recently developed three-dimensional (3D) printed denture teeth resin compared to three commercially available prefabricated denture teeth. MATERIALS AND METHODS: A total of 88 maxillary first molar denture teeth were evaluated: C (Classic; Dentsply Sirona, York, PA), DCL (SR Postaris DCL; Ivoclar Vivadent, Schaan, Liechtenstein), IPN (Portrait IPN; Dentsply Sirona, York, PA), and F (Denture Teeth A2 Resin 1 L; Formlabs, Somerville, MA). The 3D printed denture tooth specimens were fabricated from a methacrylate-based photopolymerizing resin using stereolithography (SLA). Denture teeth were subjected to a three-body wear test with a poly(methylmethacrylate) (PMMA) abrasive slurry. A Leinfelder-style four station wear apparatus with custom bullet-shaped milled zirconia styli was utilized with a load force of 36-40 N at 1.7 Hz for 200,000 cycles. Maximum depth of wear was measured using a lab grade scanner and analyzing software program. Data were analyzed using a one-way ANOVA followed by the Tukey's Multiple Comparisons post hoc test (α = 0.05). RESULTS: A statistically significant difference in depth of wear was found between denture tooth materials (p < 0.001). The mean vertical depth of wear for the 3D printed denture teeth (0.016 ± 0.010 mm) was statistically significantly less than the prefabricated denture teeth. The highly cross-linked denture teeth, DCL (0.036 ± 0.011 mm) and IPN (0.035 ± 0.014 mm), exhibited statistically significantly less wear than the conventional acrylic denture teeth. The conventional acrylic denture teeth demonstrated the greatest wear (0.058 ± 0.014 mm). No significant difference in depth of wear was found between DCL and IPN (p > 0.001). CONCLUSIONS: Denture tooth material significantly influences the depth of wear. The 3D printed denture teeth demonstrated superior wear resistance compared to the commercially available prefabricated denture teeth when opposed to zirconia. Denture teeth fabricated with SLA technology may have a promising future in prosthetic dentistry.

The Friction Clasp.

This clinical report describes a modification of the conventional direct retainer design, which incorporates advantages of the dual path partial denture, but with a greater ease of design and fabrication. The main advantage of this technique is minimizing the clasp display on Class III and Class IV removable partial denture prostheses. A clinical example using this design is described.

The History of Articulators: The Contributions of Rudolph L. Hanau and His Company-Part II.

This article is an historical overview of the Hanau Engineering Company from the time of Rudolph Hanau's death in 1930 to the present. It explores the development of many articulators intended both for removable and fixed prosthodontic restorations. The article is divided into the eras of the company's corporate history, and it reviews articulator designs and major improvements made during each of those periods.

The history of articulators: the Contributions of Rudolph L. Hanau and his company--part I.

This article is a historical review of the last decade of Rudolph Hanau's life. It covers his introduction to dentistry and explores his prolific articulator designs and contributions to the prosthodontic literature.

The history of articulators: the "Articulator Wars" phenomenon with some circumstances leading up to it.

At the dawn of the 20th century, all was not well with the practice of "plate prostheses." Removable prosthodontics had been degrading for several decades and was now generally in low esteem, even though there had been many significant advances. W. E. Walker had introduced adjustable condylar guides, George Snow, the facebow, and Carl Christensen, a method for clinically measuring the condylar inclines. Nevertheless, the average practicing dentist was still using simple hinge articulators and was apathetic to the deplorable state of the artificial teeth available; however, this was all going to change dramatically when two dentists, Alfred Gysi and J. Leon Williams, working together between 1910 and 1914, presented to the profession the "Trubyte Artificial Tooth System" that embodied both a typal system for selecting anterior teeth and new posterior occlusal carvings that made possible, for the first time, the articulation of artificial teeth. This incited many of prosthetic dentistry's elite to introduce their own theories of mandibular movement and the articulators that they designed to reflect those theories. The intense debates that ensued, both in the meeting halls and in the literature, were numerous and lasted for decades. At the time, the "Articulator Wars" had both positive and negative consequences. Today, with many of the "Articulator Wars" issues remaining as part of the practice of dentistry, the "Articulator Wars" can be considered a phenomenon of enlightenment.