Synthesis of a Stable and High-Concentration BaHfxTi1-xO3 Sol-Gel for High Electromechanical Performance of Bulk Ceramics.

Lead-based materials are widely used in piezoceramics due to their high electromechanical properties. However, due to environmental protection and sustainable development, the use of the toxic element lead (Pb) in electronic devices is strictly restricted, therefore requiring the rapid development of piezoelectric-based devices with lead-free ceramics. In this context, a lead-free doped barium titanate was studied with a dual objective. First, a new sol-gel method to synthesize Hf4+-doped BaHfxTi1-xO (BHT) with x = 0.05, 0.075, and 0.10 is presented. Such BHT sols were prepared at high concentrations of up to 1 M. Dilution in ethylene glycol allowed parameters (viscosity, colloid sizes, etc.) to be controlled, which ensured a time-stable sol for several months at room temperature. Second, densified bulk ceramics with attrited powders were obtained from these sols and showed very good electromechanical properties, with a thickness coupling factor of kt = 47% (BaHf0.05Ti0.95O3 sintered at 1500 °C/6 h). These results are a first step that will allow the processing of lead-free piezoelectric thick films using a sol-gel composite method for vibrational energy harvesting applications.

Surface acoustic wave characterization of optical sol-gel thin layers.

Controlling the thin film deposition and mechanical properties of materials is a major challenge in several fields of application. We are more particularly interested in the characterization of optical thin layers produced using sol-gel processes to reduce laser-induced damage. The mechanical properties of these coatings must be known to control and maintain optimal performance under various solicitations during their lifetime. It is therefore necessary to have means of characterization adapted to the scale and nature of the deposited materials. In this context, the dispersion of ultrasonic surface waves induced by a micrometric layer was studied on an amorphous substrate (fused silica) coated with a layer of ormosil using a sol-gel process. Our ormosil material is a silica-PDMS mixture with a variable polydimethylsiloxane (PDMS) content. The design and implementation of Surface Acoustic Wave InterDigital Transducers (SAW-IDT) have enabled quasi-monochromatic Rayleigh-type SAW to be generated and the dispersion phenomenon to be studied over a wide frequency range. Young's modulus and Poisson's ratio of coatings were estimated using an inverse method.

The core contribution of transmission electron microscopy to functional nanomaterials engineering.

Research on nanomaterials and nanostructured materials is burgeoning because their numerous and versatile applications contribute to solve societal needs in the domain of medicine, energy, environment and STICs. Optimizing their properties requires in-depth analysis of their structural, morphological and chemical features at the nanoscale. In a transmission electron microscope (TEM), combining tomography with electron energy loss spectroscopy and high-magnification imaging in high-angle annular dark-field mode provides access to all features of the same object. Today, TEM experiments in three dimensions are paramount to solve tough structural problems associated with nanoscale matter. This approach allowed a thorough morphological description of silica fibers. Moreover, quantitative analysis of the mesoporous network of binary metal oxide prepared by template-assisted spray-drying was performed, and the homogeneity of amino functionalized metal-organic frameworks was assessed. Besides, the morphology and internal structure of metal phosphide nanoparticles was deciphered, providing a milestone for understanding phase segregation at the nanoscale. By extrapolating to larger classes of materials, from soft matter to hard metals and/or ceramics, this approach allows probing small volumes and uncovering materials characteristics and properties at two or three dimensions. Altogether, this feature article aims at providing (nano)materials scientists with a representative set of examples that illustrates the capabilities of modern TEM and tomography, which can be transposed to their own research.

Nanocomposite hydrogels for cartilage tissue engineering: mesoporous silica nanofibers interlinked with siloxane derived polysaccharide.

Injectable materials for mini-invasive surgery of cartilage are synthesized and thoroughly studied. The concept of these hybrid materials is based on providing high enough mechanical performances along with a good medium for chondrocytes proliferation. The unusual nanocomposite hydrogels presented herein are based on siloxane derived hydroxypropylmethylcellulose (Si-HPMC) interlinked with mesoporous silica nanofibers. The mandatory homogeneity of the nanocomposites is checked by fluorescent methods, which show that the silica nanofibres dispersion is realized down to nanometric scale, suggesting an efficient immobilization of the silica nanofibres onto the Si-HPMC scaffold. Such dispersion and immobilization are reached thanks to the chemical affinity between the hydrophilic silica nanofibers and the pendant silanolate groups of the Si-HPMC chains. Tuning the amount of nanocharges allows tuning the resulting mechanical features of these injectable biocompatible hybrid hydrogels. hASC stem cells and SW1353 chondrocytic cells viability is checked within the nanocomposite hydrogels up to 3 wt% of silica nanofibers.

Elasticity of an assembly of disordered nanoparticles interacting via either van der Waals-bonded or covalent-bonded coating layers.

Tailoring physical and chemical properties at the nanoscale by assembling nanoparticles currently paves the way for new functional materials. Obtaining the desired macroscopic properties is usually determined by a perfect control of the contact between nanoparticles. Therefore, the physics and chemistry of nanocontacts are one of the central issues for the design of the nanocomposites. Since the birth of atomic force microscopy, crucial advances have been achieved in the quantitative evaluation of van der Waals and Casimir forces in nanostructures and of adhesion between the nanoparticles. We present here an investigation, by a noncontact method, of the elasticity of an assembly of nanoparticles interacting via either van der Waals-bonded or covalent-bonded coating layers. We demonstrate indeed that the ultrafast opto-acoustic technique, based on the generation and detection of hypersound by femtosecond laser pulses, is very sensitive to probe the properties of the nanocontacts. In particular, we observe and evaluate how much the subnanometric molecules present at nanocontacts influence the coherent acoustic phonon propagation along the network of the interconnected silica nanoparticles. Finally, we show that this ultrafast opto-acoustic technique provides quantitative estimates of the rigidity/stiffness of the nanocontacts.

Design of interpenetrated networks of mesostructured hybrid silica and nonconductive poly(vinylidene fluoride)-cohexafluoropropylene (PVdF-HFP) polymer for proton exchange membrane fuel cell applications.

Organic-inorganic hybrid membranes of poly(vinylidene fluoride)-cohexafluoropropylene (PVdF-HFP) and mesostructured silica containing sulfonic acid groups were synthesized by using the sol-gel process. These hybrid membranes were prepared by in situ co-condensation of tetraethoxysilane and an organically modified silane (ormosil) by a self-assembly route using organic surfactants as templates for tuning the architecture of the hybrid organosilica component. In this paper, we describe the elaboration and characterization of hybrid membranes all the way from the precursor solution to the evaluation of the fuel cell performances. These hybrid materials were extensively characterized by using NMR and IR spectroscopy, electron microscopy, or impedance spectroscopy so as to determinate their physicochemical and electrochemical properties. Even though the ion-exchange capacity (IEC) was quite weak, the first fuel cell tests performed with these hybrid membranes show promising results relative to optimized Nafion 112 thanks to great water management of the silica inside the hydrophobic polymer.

Applications of advanced hybrid organic-inorganic nanomaterials: from laboratory to market.

Today cross-cutting approaches, where molecular engineering and clever processing are synergistically coupled, allow the chemist to tailor complex hybrid systems of various shapes with perfect mastery at different size scales, composition, functionality, and morphology. Hybrid materials with organic-inorganic or bio-inorganic character represent not only a new field of basic research but also, via their remarkable new properties and multifunctional nature, hybrids offer prospects for many new applications in extremely diverse fields. The description and discussion of the major applications of hybrid inorganic-organic (or biologic) materials are the major topic of this critical review. Indeed, today the very large set of accessible hybrid materials span a wide spectrum of properties which yield the emergence of innovative industrial applications in various domains such as optics, micro-electronics, transportation, health, energy, housing, and the environment among others (526 references).

Hierarchically structured transparent hybrid membranes by in situ growth of mesostructured organosilica in host polymer.

The elaborate performances characterizing natural materials result from functional hierarchical constructions at scales ranging from nanometres to millimetres, each construction allowing the material to fit the physical or chemical demands occurring at these different levels. Hierarchically structured materials start to demonstrate a high input in numerous promising applied domains such as sensors, catalysis, optics, fuel cells, smart biologic and cosmetic vectors. In particular, hierarchical hybrid materials permit the accommodation of a maximum of elementary functions in a small volume, thereby optimizing complementary possibilities and properties between inorganic and organic components. The reported strategies combine sol-gel chemistry, self-assembly routes using templates that tune the material's architecture and texture with the use of larger inorganic, organic or biological templates such as latex, organogelator-derived fibres, nanolithographic techniques or controlled phase separation. We propose an approach to forming transparent hierarchical hybrid functionalized membranes using in situ generation of mesostructured hybrid phases inside a non-porogenic hydrophobic polymeric host matrix. We demonstrate that the control of the multiple affinities existing between organic and inorganic components allows us to design the length-scale partitioning of hybrid nanomaterials with tuned functionalities and desirable size organization from ångström to centimetre. After functionalization of the mesoporous hybrid silica component, the resulting membranes have good ionic conductivity offering interesting perspectives for the design of solid electrolytes, fuel cells and other ion-transport microdevices.

Solid state (47,49)Ti, (87)Sr and (137)Ba NMR characterisation of mixed barium/strontium titanate perovskites.

Solid state (47,49)Ti, (137)Ba, (87)Sr NMR spectra have been recorded on BaxSrl-xTiO3 (0