ABSTRACT
In this work, a series of biobased phenolic resins were developed starting from kraft and soda lignin, suitably functionalized through esterification by means of succinic anhydride. As a result of an extensive optimization study of the functionalization and curing reactions, clear correlations between lignin type and chemical-physical characteristics and the properties of the resulting phenolic resin systems were described. In particular, the esterification reaction through succinic anhydride was found to play a key role in enhancing the chemical reactivity and in facilitating the successful incorporation of lignin into the resin formulations. The obtained high-lignin-content thermoset materials were shown to exhibit tunable chemical (functionality, gel content, and cross-linking density), thermal (glass transition temperature and thermo-oxidative stability), and mechanical (surface hardness, indentation modulus, and creep behavior) characteristics, which could outperform those of fully oil-based reference phenolic resins by judicious control of lignin concentration and chemical characteristics. In particular, succinylated kraft lignin was found to enable more efficient incorporation into the cured systems. This work provides the first demonstration of the incorporation of succinic-anhydride-modified-lignin in the formulation of high-performance phenolic resins, ultimately contributing to the definition of structure-property-performance correlations for rational biobased material design in the context of advanced and sustainable manufacturing.
ABSTRACT
Polyurethane (PU) coatings with high lignin content and tunable properties were made using a combination of fractionation and partial catalytic depolymerization as a novel strategy to tailor lignin molar mass and hydroxyl group reactivity, the key parameters for use in PU coatings. Acetone organosolv lignin obtained from pilot-scale fractionation of beech wood chips was processed at the kilogram scale to produce lignin fractions with specific molar mass ranges (Mw 1000-6000 g/mol) and reduced polydispersity. Aliphatic hydroxyl groups were distributed relatively evenly over the lignin fractions, allowing detailed study of the correlation between lignin molar mass and hydroxyl group reactivity using an aliphatic polyisocyanate linker. As expected, the high molar mass fractions exhibited low cross-linking reactivity, yielding rigid coatings with a high glass transition temperature (Tg). The lower Mw fractions showed increased lignin reactivity, extent of cross-linking, and gave coatings with enhanced flexibility and lower Tg. Lignin properties could be further tailored by lignin partial depolymerization by reduction (PDR) of the beech wood lignin and its high molar mass fractions; excellent translation of the PDR process was observed from laboratory to the pilot scale necessary for coating applications in prospective industrial scenarios. Lignin depolymerization significantly improved lignin reactivity, and coatings produced from PDR lignin showed the lowest Tg values and highest coating flexibility. Overall, this study provides a powerful strategy for the production of PU coatings with tailored properties and high (>90%) biomass content, paving the path to the development of fully green and circular PU materials.
ABSTRACT
In the present work, rice husks (RHs), which, worldwide, represent one of the most abundant agricultural wastes in terms of their quantity, have been treated and fractionated in order to allow for their complete valorization. RHs coming from the raw and parboiled rice production have been submitted at first to a hydrothermal pretreatment followed by a deep eutectic solvent fractionation, allowing for the separation of the different components by means of an environmentally friendly process. The lignins obtained from raw and parboiled RHs have been thoroughly characterized and showed similar physico-chemical characteristics, indicating that the parboiling process does not introduce obvious lignin alterations. In addition, a preliminary evaluation of the potentiality of such lignin fractions as precursors of cement water reducers has provided encouraging results. A fermentation-based optional preprocess has also been investigated. However, both raw and parboiled RHs demonstrated a poor performance as a microbiological growth substrate, even in submerged fermentation using cellulose-degrading fungi. The described methodology appears to be a promising strategy for the valorization of these important waste biomasses coming from the rice industry towards a circular economy perspective.
