The effect of mechanical strains in soft tissues of the shoulder during load carriage.

Soldiers and recreational backpackers are often required to carry heavy loads during military operations or hiking. Shoulder strain appears to be one of the limiting factors of load carriage due to skin and underlying soft tissue deformations, trapped nerves, or obstruction of blood vessels. The present study was aimed to determine relationships between backpack weights and the state of loads in the shoulder׳s inner tissues, with a special focus on the deformations in the brachial plexus. Open-MRI scans were used for developing and then verifying a three-dimensional, non-linear, large deformation, finite element model of the shoulder. Loads were applied at the strap-shoulder contact surfaces of the model by pulling the strap towards the shoulder until the desired load was reached. Increasing the strap tensile forces up to a load that represents 35kg backpack resulted in gradual increase in strains within the underlying soft tissues: the maximal tensile strain in the brachial plexus for a 25kg backpack was 12%, and while carrying 35kg, the maximal tensile strain increased to 16%. The lateral aspect of the brachial plexus was found to be more vulnerable to deformation-inflicted effects than the medial aspect. This is due to the anatomy of the clavicle that poorly shields the plexus from compressive loads applied during load carriage, while the neural tissue in the medial aspect of the shoulder is better protected by the clavicle. The newly developed model can serve as a tool to estimate soft tissue deformations in the brachial plexus for heavy backpack loads, up to 35kg. This method will allow further development of new strap structures and materials for alleviating the strains applied on the shoulder soft tissues.

Deformations in the Shoulder Tissues During Load Carriage: A Computational Model.

Shoulder soft tissue deformations seem to be one of the limiting factors of load carriage among soldiers and recreational backpackers that are required to carry heavy loads. Yet, there are no loading limits related to the forces borne by the shoulders, and the backpacks designs are not consistent with providing pressure relief from this sensitive anatomical region. The aim of this study was to develop a model that will enable to study the biomechanical loads that develop in the shoulder under heavy loads and to help in optimizing load carriage systems design. A 3-dimensional, anatomically accurate finite element model of a human shoulder was constructed based on MRI scans. The model was developed to calculate the effective stresses on the skin below the shoulder strap (superficial loads) and the effective strain in the brachial plexus region (inner tissue deformation) for loads of up to 35 kg. The model successfully predicted deformations in the soft tissue surrounding the brachial plexus when compared with deformations measured from load-bearing MRI scans. The model yielded a skin pressure mapping, which showed pressure hotspots in the clavicle region. Inner tissue deformations mapping, as assessed by brachial plexus envelop strains, were found to peak at 30% effective strain at the lateral aspect below the pectoralis muscle. The newly developed model successfully predicted soft tissue deformations in the shoulder related to backpacks. This model can be used to optimize load carriage systems for better distribution of pressure over the shoulders and lower inner tissue deformations.