ABSTRACT
We present a 100 µm-thick, wireless, and battery-free implant for brain stimulation through a U.S. Food and Drug Administration-approved collagen dura substitute without contact with the brain's surface, while providing visible-light spectrum telemetry to track the onset of stimulation. The device is fabricated on a 16 × 6.67 mm2 biocompatible parylene/PDMS substrate and is encapsulated with a 2 µm-thick transparent parylene layer that enables the relay of the LED brightness. The in vivo rodent testing confirmed the implant's ability to trigger motor response while generating observable brightness through the skin. The results reveal the prospect of wireless stimulation with enhanced safety by eliminating contact between the implant and the brain, with optical telemetry for facilitated tracking.
ABSTRACT
We present the design, fabrication, and in vivo testing of an ultra-thin (100 µm) wireless and battery-free implant for stimulation of the brain's cortex. The implant is fabricated on a flexible and transparent parylene/PDMS substrate, and it is miniaturized to dimensions of 15.6 × 6.6 mm 2. The frequency and pulse width of the monophasic voltage pulses are determined through On-Off keying (OOK) modulation of a wireless transmission at 2.45 GHz. Furthermore, the implant triggered a motor response in vivo when tested in 6 rodents. Limb response was observed by wireless stimulation of the brain's motor cortex through an FDA-approved collagen dura substitute that was placed on the dura in the craniotomy site, with no direct contact between the implant's electrodes and the brain's cortical surface. Therefore, the wireless stimulation method reported herein enables the concept of an e-dura substitute, where wireless electronics can be integrated onto a conventional dura substitute to augment its therapeutic function and administer any desired stimulation protocol without the need for post-surgical intervention for battery replacement or reprogramming stimulation parameters.
