ABSTRACT
Steels with sub-micrometre grain sizes usually possess high toughness and strength, which makes them promising for lightweighting technologies and energy-saving strategies. So far, the industrial fabrication of ultrafine-grained (UFG) alloys, which generally relies on the manipulation of diffusional phase transformation, has been limited to steels with austenite-to-ferrite transformation1-3. Moreover, the limited work hardening and uniform elongation of these UFG steels1,4,5 hinder their widespread application. Here we report the facile mass production of UFG structures in a typical Fe-22Mn-0.6C twinning-induced plasticity steel by minor Cu alloying and manipulation of the recrystallization process through the intragranular nanoprecipitation (within 30 seconds) of a coherent disordered Cu-rich phase. The rapid and copious nanoprecipitation not only prevents the growth of the freshly recrystallized sub-micrometre grains but also enhances the thermal stability of the obtained UFG structure through the Zener pinning mechanism6. Moreover, owing to their full coherency and disordered nature, the precipitates exhibit weak interactions with dislocations under loading. This approach enables the preparation of a fully recrystallized UFG structure with a grain size of 800 ± 400 nanometres without the introduction of detrimental lattice defects such as brittle particles and segregated boundaries. Compared with the steel to which no Cu was added, the yield strength of the UFG structure was doubled to around 710 megapascals, with a uniform ductility of 45 per cent and a tensile strength of around 2,000 megapascals. This grain-refinement concept should be extendable to other alloy systems, and the manufacturing processes can be readily applied to existing industrial production lines.
ABSTRACT
Active learning-the field of machine learning (ML) dedicated to optimal experiment design-has played a part in science as far back as the 18th century when Laplace used it to guide his discovery of celestial mechanics. In this work, we focus a closed-loop, active learning-driven autonomous system on another major challenge, the discovery of advanced materials against the exceedingly complex synthesis-processes-structure-property landscape. We demonstrate an autonomous materials discovery methodology for functional inorganic compounds which allow scientists to fail smarter, learn faster, and spend less resources in their studies, while simultaneously improving trust in scientific results and machine learning tools. This robot science enables science-over-the-network, reducing the economic impact of scientists being physically separated from their labs. The real-time closed-loop, autonomous system for materials exploration and optimization (CAMEO) is implemented at the synchrotron beamline to accelerate the interconnected tasks of phase mapping and property optimization, with each cycle taking seconds to minutes. We also demonstrate an embodiment of human-machine interaction, where human-in-the-loop is called to play a contributing role within each cycle. This work has resulted in the discovery of a novel epitaxial nanocomposite phase-change memory material.
ABSTRACT
Thermal annealing of Ti contacts is commonly implemented in the fabrication of MoS2 devices; however, its effects on interface chemistry have not been previously reported in the literature. In this work, the thermal stability of titanium contacts deposited on geological bulk single crystals of MoS2 in ultrahigh vacuum (UHV) is investigated with X-ray photoelectron spectroscopy and scanning transmission electron microscopy (STEM). In the as-deposited condition, the reaction of Ti with MoS2 is observed resulting in a diffuse interface between the two materials that comprises metallic molybdenum and titanium sulfide compounds. Annealing Ti/MoS2 sequentially at 100, 300, and 600 °C for 30 min in UHV results in a gradual increase in the reaction products as measured by XPS. Accordingly, STEM reveals the formation of a new ordered phase and a Mo-rich layer at the interface following heating. Due to the high degree of reactivity, the Ti/MoS2 interface is not thermally stable even at a transistor operating temperature of 100 °C, while post-deposition annealing further enhances the interfacial reactions. These findings have important consequences for electrical transport properties, highlighting the importance of interface chemistry in the metal contact design and fabrication.
ABSTRACT
Heterogeneous integration of nanomaterials has enabled advanced electronics and photonics applications. However, similar progress has been challenging for thermal applications, in part due to shorter wavelengths of heat carriers (phonons) compared to electrons and photons. Here, we demonstrate unusually high thermal isolation across ultrathin heterostructures, achieved by layering atomically thin two-dimensional (2D) materials. We realize artificial stacks of monolayer graphene, MoS2, and WSe2 with thermal resistance greater than 100 times thicker SiO2 and effective thermal conductivity lower than air at room temperature. Using Raman thermometry, we simultaneously identify the thermal resistance between any 2D monolayers in the stack. Ultrahigh thermal isolation is achieved through the mismatch in mass density and phonon density of states between the 2D layers. These thermal metamaterials are an example in the emerging field of phononics and could find applications where ultrathin thermal insulation is desired, in thermal energy harvesting, or for routing heat in ultracompact geometries.
ABSTRACT
The coexistence of metallic and semiconducting polymorphs in transition-metal dichalcogenides (TMDCs) can be utilized to solve the large contact resistance issue in TMDC-based field effect transistors (FETs). A semiconducting hexagonal (2H) molybdenum ditelluride (MoTe2) phase, metallic monoclinic (1T') MoTe2 phase, and their lateral homojunctions can be selectively synthesized in situ by chemical vapor deposition due to the small free energy difference between the two phases. Here, we have investigated, in detail, the structural and electrical properties of in situ-grown lateral 2H/1T' MoTe2 homojunctions grown using flux-controlled phase engineering. Using atomic-resolution plan-view and cross-sectional transmission electron microscopy analyses, we show that the round regions of near-single-crystalline 2H-MoTe2 grow out of a polycrystalline 1T'-MoTe2 matrix. We further demonstrate the operation of MoTe2 FETs made on these in situ-grown lateral homojunctions with 1T' contacts. The use of a 1T' phase as electrodes in MoTe2 FETs effectively improves the device performance by substantially decreasing the contact resistance. The contact resistance of 1T' electrodes extracted from transfer length method measurements is 470 ± 30 Ω·µm. Temperature- and gate-voltage-dependent transport characteristics reveal a flat-band barrier height of â¼30 ± 10 meV at the lateral 2H/1T' interface that is several times smaller and shows a stronger gate modulation, compared to the metal/2H Schottky barrier height. The information learned from this analysis will be critical to understanding the properties of MoTe2 homojunction FETs for use in memory and logic circuity applications.
ABSTRACT
Band-to-band tunneling field-effect transistors (TFETs) have emerged as promising candidates for low-power integration circuits beyond conventional metal-oxide-semiconductor field-effect transistors (MOSFETs) and have been demonstrated to overcome the thermionic limit, which results intrinsically in sub-threshold swings of at least 60 mV/dec at room temperature. Here, we demonstrate complementary TFETs based on few-layer black phosphorus, in which multiple top gates create electrostatic doping in the source and drain regions. By electrically tuning the doping types and levels in the source and drain regions, the device can be reconfigured to allow for TFET or MOSFET operation and can be tuned to be n-type or p-type. Owing to the proper choice of materials and careful engineering of device structures, record-high current densities have been achieved in 2D TFETs. Full-band atomistic quantum transport simulations of the fabricated devices agree quantitatively with the current-voltage measurements, which gives credibility to the promising simulation results of ultrascaled phosphorene TFETs. Using atomistic simulations, we project substantial improvements in the performance of the fabricated TFETs when channel thicknesses and oxide thicknesses are scaled down.
ABSTRACT
Transition metal dichalcogenides have attracted attention as potential building blocks for various electronic applications due to their atomically thin nature and polymorphism. Here, we report an electric-field-induced structural transition from a 2H semiconducting to a distorted transient structure (2Hd) and orthorhombic Td conducting phase in vertical 2H-MoTe2- and Mo1-xWxTe2-based resistive random access memory (RRAM) devices. RRAM programming voltages are tunable by the transition metal dichalcogenide thickness and show a distinctive trend of requiring lower electric fields for Mo1-xWxTe2 alloys versus MoTe2 compounds. Devices showed reproducible resistive switching within 10 ns between a high resistive state and a low resistive state. Moreover, using an Al2O3/MoTe2 stack, On/off current ratios of 106 with programming currents lower than 1 µA were achieved in a selectorless RRAM architecture. The sum of these findings demonstrates that controlled electrical state switching in two-dimensional materials is achievable and highlights the potential of transition metal dichalcogenides for memory applications.
ABSTRACT
The electrochemical performance and microstructure of positive electrodes are intimately linked. As such, developing batteries resistance to capacity and voltage fade requires understanding these underlying structure-properties relationships and their evolution with operation. Epitaxial films of a Li-rich manganese-nickel- cobalt oxide cathode material were deposited on (100) and (111) orientated SrRuO3/SrTiO3 substrates. Cyclic voltammetry and impedance spectroscopy tracked the response of these positive electrode materials, while the microstructure of the pristine and cycled films was characterized using transmission electron microscopy. Energy-dispersive X-ray spectroscopy identifies compositional fluctuations in as-deposited films. Phase transformations and dissolution were observed after electrochemical testing. There is a correlation between both local composition and substrate orientation (i.e., surface faceting) and what degradation pathways are active. Regions with comparatively higher concentrations of Ni and Co were more resistant to dissolution and unfavorable phase transformations than those with relatively more Mn. As such, a global composition metric may not be an accurate predictor of degradation and performance. Rather possessing the synthetic ability to engineer the chemical profile as well as characterizing it, pose a challenge and opportunity.
ABSTRACT
Due to the directional dependence of physical properties, it is advantageous to grow and then study materials in specific orientations. Films of battery materials grown in epitaxy offers the possibility to gain new insight into the role of physical structure on electrochemical behaviors. Here we demonstrate the growth, testing, and characterization of monoclinic-phase (space group C2/m) Li-Mn-Ni-Co-O epitaxial films. The monoclinic phase is a layered structure and as such lithium diffusion is favored along specific crystallographic directions. Films were grown by pulsed laser deposition onto SrRuO3/SrTiO3 substrates with (001) and (111) orientations. Cyclic voltammetry measured the response of these positive electrode materials, while the film structure was characterized using scanning transmission electron microscopy. A combination of imaging and diffraction identifies the presence of orientational variants. Variants disrupt the orientation anisotropy expected of these layered materials when grown in epitaxy, thereby masking differences in electrochemical behavior as a function of substrate orientation. Learning to control the domain structure now presents itself as a challenge to realize the potential of low symmetry battery materials grown in epitaxy on high symmetry substrates.
ABSTRACT
Electric-field (E-field) control of magnetism enabled by multiferroic materials has the potential to revolutionize the landscape of present memory devices plagued with high energy dissipation. To date, this E-field controlled multiferroic scheme has only been demonstrated at room temperature using BiFeO3 films grown on DyScO3, a unique and expensive substrate, which gives rise to a particular ferroelectric domain pattern in BiFeO3. Here, we demonstrate reversible electric-field-induced switching of the magnetic state of the Co layer in Co/BiFeO3 (BFO) (001) thin film heterostructures fabricated on (001) SrTiO3 (STO) substrates. The angular dependence of the coercivity and the remanent magnetization of the Co layer indicates that its easy axis reversibly switches back and forth 45° between the (100) and the (110) crystallographic directions of STO as a result of alternating application of positive and negative voltage pulses between the patterned top Co electrode layer and the (001) SrRuO3 (SRO) layer on which the ferroelectric BFO is epitaxially grown. The coercivity (HC) of the Co layer exhibits a hysteretic behavior between two states as a function of voltage. A mechanism based on the intrinsic magnetoelectric coupling in multiferroic BFO involving projection of antiferromagnetic G-type domains is used to explain the observation. We have also measured the exact canting angle of the G-type domain in strained BFO films for the first time using neutron diffraction. These results suggest a pathway to integrating BFO-based devices on Si wafers for implementing low power consumption and nonvolatile magnetoelectronic devices.
ABSTRACT
A pristine Li-rich layered electrode material with composition Li1.2Mn0.55Ni0.15Co0.1O2 was characterized by X-ray diffraction, transmission electron microscopy, and scanning transmission electron microscopy to determine whether it is a coherent mixture of monoclinic C2/m Li2MO3 and trigonal [Formula: see text] LiMO2 phases or a solid solution of the monoclinic phase. Contradictory results have been previously reported which can be attributed to the complexity and structural similarity of the monoclinic and trigonal phases. We resolved this uncertainty by combining diffraction and imaging techniques that probe complimentary length scales. Our results demonstrate that the structure is primarily monoclinic, supporting the solid solution model, although near surface structural alterations were also observed.
ABSTRACT
The evolution of interface between the epitaxial thin film LiCoO2 (LCO) electrode and liquid electrolyte and inside the LCO film during electrochemical cycling has been analyzed by high resolution scanning transmission electron microscopy. Relaxation of sharp translational domain boundaries with mismatched layers of CoO2 octahedra occurs during cycling and results in formation of continuous CoO2 layers across the boundaries. The original trigonal layered structure of LiCoO2 tends to change into a spinel structure at the electrode/electrolyte interface after significant extraction of Li from LCO. This change is more pronounced at 4.2 V peak of CV, indicating lower stability of the layered LCO structure near its surface after Li is extracted above 60%. The transformed structure is identified to be close to Co3O4, with Co both on tetrahedral and octahedral sites, rather than to LiCo2O4 as it was suggested in earlier publications. Electron energy-loss spectroscopy measurements also show that Co ions oxidation state is reduced to mixed valence state Co(2+)/Co(3+) during the structure changes to spinel rather than oxidized.
ABSTRACT
Epitaxial LiCoO2 (LCO) thin films of different orientations were fabricated by pulsed laser deposition (PLD) in order to model single-crystal behavior during electrochemical reaction. This paper demonstrates that deposition of conductive SrRuO3 between a SrTiO3 (STO) substrate and an LCO film allows (1) epitaxial growth of LCO with orientation determined by STO and (2) electrochemical measurements, such as cyclic voltammetry and impedance spectroscopy. Scanning transmission electron microscopy (S/TEM and SEM) has demonstrated an orientation relationship between LCO and STO of three orientations, (111), (110) and (100), and identified a LCO/electrolyte surface as consisting of two crystallographic facets of LCO, (001) and {104}. The difference in the orientation of LCO accounts for the difference in the exposed area of {104} planes to the electrolyte, where lithium ions have easy access to fast diffusion planes. The resistance for lithium ion transfer measured by electrochemical impedance spectroscopy had inverse correlation with exposed area of {104} plane measured by TEM. Chemical diffusivity of lithium ions in LCO was measured by fitting electrochemical impedance spectroscopy data to a modified Randles equivalent circuit and allowed us to determine its dependence on film orientation.
ABSTRACT
The microstructure of an annealed alloy with a Zr8Ni21 composition was studied by both scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The presence of three phases, Zr8Ni21, Zr2Ni7, and Zr7Ni10, was confirmed by SEM/X-ray energy dispersive spectroscopy compositional mapping and TEM electron diffraction. Distribution of the phases and their morphology can be linked to a multi-phase structure formed by a sequence of reactions: (1) L â Zr2Ni7 + L'; (2) peritectic Zr2Ni7 + L' â Zr2Ni7 + Zr8Ni21 + L"; (3) eutectic L" â Zr8Ni21 + Zr7Ni10. The effect of annealing at 960 °C, which was intended to convert a cast structure into a single-phase Zr8Ni21 structure, was only moderate and the resulting alloy was still multi-phased. TEM and crystallographic analysis of the Zr2Ni7 phase show a high density of planar (001) defects that were explained as low-energy boundaries between rotational variants and stacking faults. The crystallographic features arise from the pseudo-hexagonal structure of Zr2Ni7. This highly defective Zr2Ni7 phase was identified as the source of the broad X-ray diffraction peaks at around 38.4° and 44.6° when a Cu-K was used as the radiation source.
ABSTRACT
Mg100-xVx (x = 0 to 15) thin films capped with Pd were prepared by electron beam codeposition and studied for their hydrogenation/dehydrogenation kinetics and cycling properties at 140 °C under hydrogenation pressures of 0.1 MPa. It has been found that the Mg100-xVx thin films show significantly higher reversible hydrogen-storage capacity and faster kinetics in comparison with a pure Mg thin film; for instance, the maximum hydrogen absorption (3.7% mass fraction hydrogen) can be obtained in the fifth cycle for Mg90V10 in less than 5 min. The addition of V clearly plays a favorable role in improving the reversible hydrogen-storage capacity of an Mg film; however, with increasing hydrogenation/dehydrogenation cycles the hydrogen-storage capacity gradually deteriorates. To explore the origin of the effect of V on the improved hydrogenation of an Mg thin film, in this work we focused on studying the structural variations of the Mg90V10 thin film before and after hydrogenation at different stages of cycling; the films were investigated by X-ray diffraction as well as scanning and transmission electron microscopy. We concluded that (1) early in the absorption/desorption cycling the as-deposited structure of percolating layers of nanocrystalline V throughout a Mg matrix is preserved; (2) the percolating V layers envelope fine Mg grains and act as (a) dispersers that isolate small Mg grains, (b) fast diffusers of hydrogen, and (c) hydrogen catalysts at the Mg/V interface to form MgH2; and (3) with progressive cycling, the continuous layers of V aggregate to spherical nanoparticles, which interrupts the continuity of fast hydrogen diffusion through V.
ABSTRACT
We report the characterization of a unique metallic glass that, during rapid cooling of an Al-Fe-Si melt, forms by nucleation, followed by growth normal to a moving interface between the solid and melt with partitioning of the chemical elements. We determine experimentally that this is not a polycrystalline composite with nanometer-sized grains, and conclude that this may be a new kind of structure: an atomically ordered, isotropic, noncrystalline solid, possessing no long-range translational symmetry.
ABSTRACT
Bimetallic hydride NaMgH(3) is used for the first time as a vehicle to enhance hydrogen release and uptake from LiNH(2). The combination of NaMgH(3) with LiNH(2) at a molar ratio of 1 : 2 can release about 4.0 wt% of hydrogen without detectable NH(3) emission in the temperature range of 45 °C to 325 °C and exhibiting superior dehydrogenation as compared to individual NaH and/or MgH(2) combined with LiNH(2). A high capacity retention of about 75% resulting from the introduction of NaMgH(3) is also achieved in LiNH(2) as well as re-hydrogenation under milder conditions of 180 °C and 5 MPa H(2) pressure. These significant improvements are attributed to synergistic effects of in situ formed NaH and MgH(2)via the decomposition of NaMgH(3) where a succession of competing reactions from the cyclic consumption/recovery of NaH are involved and serve as a "carrier" for the ultra-rapid conveyance of the N-containing species between the [NH(2)](-) amide and the resulting [NH](2-) imide complexes.
ABSTRACT
Chemical and structural heterogeneity and the resulting interaction of coexisting phases can lead to extraordinary behaviours in oxides, as observed in piezoelectric materials at morphotropic phase boundaries and relaxor ferroelectrics. However, such phenomena are rare in metallic alloys. Here we show that, by tuning the presence of structural heterogeneity in textured Co(1-x)Fe(x) thin films, effective magnetostriction λ(eff) as large as 260 p.p.m. can be achieved at low-saturation field of ~10 mT. Assuming λ(100) is the dominant component, this number translates to an upper limit of magnetostriction of λ(100)≈5λ(eff) >1,000 p.p.m. Microstructural analyses of Co(1-x)Fe(x) films indicate that maximal magnetostriction occurs at compositions near the (fcc+bcc)/bcc phase boundary and originates from precipitation of an equilibrium Co-rich fcc phase embedded in a Fe-rich bcc matrix. The results indicate that the recently proposed heterogeneous magnetostriction mechanism can be used to guide exploration of compounds with unusual magnetoelastic properties.
ABSTRACT
In order to increase measurement throughput, a characterization scheme has been developed that accurately measures the hydrogen storage properties of materials in quantities ranging from 10 ng to 1 g. Initial identification of promising materials is realized by rapidly screening thin-film composition spread and thickness wedge samples using normalized IR emissivity imaging. The hydrogen storage properties of promising samples are confirmed through measurements on single-composition films with high-sensitivity (resolution <0.3 µg) Sievert's-type apparatus. For selected samples, larger quantities of up to â¼100 mg may be prepared and their (de)hydrogenation and micro-structural properties probed via parallel in situ Raman spectroscopy. Final confirmation of the hydrogen storage properties is obtained on â¼1 g powder samples using a combined Raman spectroscopy/Sievert's apparatus.
ABSTRACT
The use of Li3BN2H8 complex hydride as a practical hydrogen storage material is limited by its high desorption temperature and poor reversibility. While certain catalysts have been shown to decrease the dehydrogenation temperature, no significant improvement in reversibility has been reported thus far. In this study, we demonstrated that tuning the particle size to the nanometer scale by infiltration into nanoporous carbon scaffolds leads to dramatic improvements in the reversibility of Li3BN2H8. Possible changes in the dehydrogenation path were also observed in the nanoscaffolded hydride.