Comparison of hygiene levels in metal-ceramic and stratified zirconia in prosthetic rehabilitation on teeth and implants: a retrospective clinical study of a three-year follow-up.

The aim of this retrospective clinical study was to evaluate and compare oral hygiene levels in patients subjected to fixed metal-ceramic or stratified zirconia prostheses, either on teeth or on dental implants. Twenty patients, including 10 with metal-ceramic prostheses and 10 with stratified zirconia, were engaged for the study. Considering the prosthesis positioning phase as zero time, all patients were examined twice a year for a follow-up period of 3 years. During each session, to assess oral cavity state of health, both the Plaque Index (IP) and the Bleeding Index (BOP) were recorded. All patients were instructed in home hygiene maintenance and subjected to professional oral hygiene sessions customized according to prothesis type (on natural teeth or dental implants) and materials (metal ceramic or stratified zirconia). Statistically significant evidence was found in IP values, with an increase in the initial stages in zirconia prostheses and in the final stages in metal-ceramic ones. BOP levels showed a reduction during the follow-up period, but no statistically significant differences were found between examined groups. An adequate patient education in hygiene maintenance associated with professional oral hygiene sessions with special tools could positively affect fixed prostheses' maintenance, both on natural teeth and on dental implants.

Spectral µCT with an energy resolving and interpolating pixel detector.

A main challenge in x-ray µCT with laboratory radiation derives from the broad spectral content, which in contrast to monochromatic synchrotron radiation gives rise to reconstruction artifacts and impedes quantitative reconstruction. Due to the low spectral brightness of these sources, monochromatization is unfavorable and parallel recording of a broad bandpath is practically indispensable. While conventional CT sums up all spectral components into a single detector value, spectral CT discriminates the data in several spectral bins. Here we show that a new generation of charge integrating and interpolating pixel detectors is ideally suited to implement spectral CT with a resolution in the range of 10 µm. We find that the information contained in several photon energy bins largely facilitates automated classification of materials, as demonstrated for of a mouse cochlea. Bones, soft tissues, background and metal implant materials are discriminated automatically. Importantly, this includes taking a better account of phase contrast effects, based on tailoring reconstruction parameters to specific energy bins.

The EIGER detector for low-energy electron microscopy and photoemission electron microscopy.

EIGER is a single-photon-counting hybrid pixel detector developed at the Paul Scherrer Institut, Switzerland. It is designed for applications at synchrotron light sources with photon energies above 5 keV. Features of EIGER include a small pixel size (75 µm × 75 µm), a high frame rate (up to 23 kHz), a small dead-time between frames (down to 3 µs) and a dynamic range up to 32-bit. In this article, the use of EIGER as a detector for electrons in low-energy electron microscopy (LEEM) and photoemission electron microscopy (PEEM) is reported. It is demonstrated that, with only a minimal modification to the sensitive part of the detector, EIGER is able to detect electrons emitted or reflected by the sample and accelerated to 8-20 keV. The imaging capabilities are shown to be superior to the standard microchannel plate detector for these types of applications. This is due to the much higher signal-to-noise ratio, better homogeneity and improved dynamic range. In addition, the operation of the EIGER detector is not affected by radiation damage from electrons in the present energy range and guarantees more stable performance over time. To benchmark the detector capabilities, LEEM experiments are performed on selected surfaces and the magnetic and electronic properties of individual iron nanoparticles with sizes ranging from 8 to 22 nm are detected using the PEEM endstation at the Surface/Interface Microscopy (SIM) beamline of the Swiss Light Source.

Towards hybrid pixel detectors for energy-dispersive or soft X-ray photon science.

JUNGFRAU (adJUstiNg Gain detector FoR the Aramis User station) is a two-dimensional hybrid pixel detector for photon science applications at free-electron lasers and synchrotron light sources. The JUNGFRAU 0.4 prototype presented here is specifically geared towards low-noise performance and hence soft X-ray detection. The design, geometry and readout architecture of JUNGFRAU 0.4 correspond to those of other JUNGFRAU pixel detectors, which are charge-integrating detectors with 75 µm × 75 µm pixels. Main characteristics of JUNGFRAU 0.4 are its fixed gain and r.m.s. noise of as low as 27 e(-) electronic noise charge (<100 eV) with no active cooling. The 48 × 48 pixels JUNGFRAU 0.4 prototype can be combined with a charge-sharing suppression mask directly placed on the sensor, which keeps photons from hitting the charge-sharing regions of the pixels. The mask consists of a 150 µm tungsten sheet, in which 28 µm-diameter holes are laser-drilled. The mask is aligned with the pixels. The noise and gain characterization, and single-photon detection as low as 1.2 keV are shown. The performance of JUNGFRAU 0.4 without the mask and also in the charge-sharing suppression configuration (with the mask, with a `software mask' or a `cluster finding' algorithm) is tested, compared and evaluated, in particular with respect to the removal of the charge-sharing contribution in the spectra, the detection efficiency and the photon rate capability. Energy-dispersive and imaging experiments with fluorescence X-ray irradiation from an X-ray tube and a synchrotron light source are successfully demonstrated with an r.m.s. energy resolution of 20% (no mask) and 14% (with the mask) at 1.2 keV and of 5% at 13.3 keV. The performance evaluation of the JUNGFRAU 0.4 prototype suggests that this detection system could be the starting point for a future detector development effort for either applications in the soft X-ray energy regime or for an energy-dispersive detection system.

Ru/Al Multilayers Integrate Maximum Energy Density and Ductility for Reactive Materials.

Established and already commercialized energetic materials, such as those based on Ni/Al for joining, lack the adequate combination of high energy density and ductile reaction products. To join components, this combination is required for mechanically reliable bonds. In addition to the improvement of existing technologies, expansion into new fields of application can also be anticipated which triggers the search for improved materials. Here, we present a comprehensive characterization of the key parameters that enables us to classify the Ru/Al system as new reactive material among other energetic systems. We finally found that Ru/Al exhibits the unusual integration of high energy density and ductility. For example, we measured reaction front velocities up to 10.9 (± 0.33) ms(-1) and peak reaction temperatures of about 2000 °C indicating the elevated energy density. To our knowledge, such high temperatures have never been reported in experiments for metallic multilayers. In situ experiments show the synthesis of a single-phase B2-RuAl microstructure ensuring improved ductility. Molecular dynamics simulations corroborate the transformation behavior to RuAl. This study fundamentally characterizes a Ru/Al system and demonstrates its enhanced properties fulfilling the identification requirements of a novel nanoscaled energetic material.

Radiation hardness assessment of the charge-integrating hybrid pixel detector JUNGFRAU 1.0 for photon science.

JUNGFRAU (adJUstiNg Gain detector FoR the Aramis User station) is a two-dimensional hybrid pixel detector for photon science applications in free electron lasers, particularly SwissFEL, and synchrotron light sources. JUNGFRAU is an automatic gain switching, charge-integrating detector which covers a dynamic range of more than 10(4) photons of an energy of 12 keV with a good linearity, uniformity of response, and spatial resolving power. The JUNGFRAU 1.0 application-specific integrated circuit (ASIC) features a 256 × 256 pixel matrix of 75 × 75 µm(2) pixels and is bump-bonded to a 320 µm thick Si sensor. Modules of 2 × 4 chips cover an area of about 4 × 8 cm(2). Readout rates in excess of 2 kHz enable linear count rate capabilities of 20 MHz (at 12 keV) and 50 MHz (at 5 keV). The tolerance of JUNGFRAU to radiation is a key issue to guarantee several years of operation at free electron lasers and synchrotrons. The radiation hardness of JUNGFRAU 1.0 is tested with synchrotron radiation up to 10 MGy of delivered dose. The effect of radiation-induced changes on the noise, baseline, gain, and gain switching is evaluated post-irradiation for both the ASIC and the hybridized assembly. The bare JUNGFRAU 1.0 chip can withstand doses as high as 10 MGy with minor changes to its noise and a reduction in the preamplifier gain. The hybridized assembly, in particular the sensor, is affected by the photon irradiation which mainly shows as an increase in the leakage current. Self-healing of the system is investigated during a period of 11 weeks after the delivery of the radiation dose. Annealing radiation-induced changes by bake-out at 100 °C is investigated. It is concluded that the JUNGFRAU 1.0 pixel is sufficiently radiation-hard for its envisioned applications at SwissFEL and synchrotron beam lines.

PTSD prevalence and associated risk factors after a fire disaster that broke out in a paediatric hospital: a cross-sectional study.

BACKGROUND: Several studies have shown a higher risk of psychological problems in health care workers exposed to serious occupational stressors. OBJECTIVES: The aim of the present study was to assess the presence of Post-traumatic Stress Disorder (PTSD) and possible risk factors in a sample of 32 workers who were at the same time rescuers and victims of a fire that broke out in the neonatal intensive care unit of a large paediatric hospital. METHODS: Immediately and six months after the event, the subjects underwent a study protocol aimed at the diagnostic assessment of PTSD, investigated via the Clinician-Administered PTSD Scale (CAPS) and the Impact of Event Scale-Revised (IES-R). RESULTS: Out of the 30 subjects examined (two were missing), six showed the diagnostic criteria for a current PTSD. Risk factors for PTSD onset were a prior psychiatric disorder, the level of involvement in the fire disaster and the presence of phobias in the days immediately after the event. Gender and level of education approached statistical significance. CONCLUSIONS: The high prevalence of PTSD found in this sample was due to the fact that the risk of death or serious injury involved infants.

Sex ratio and parental investment in Trypoxylon (Trypargilum) agamemnon Richards (Hymenoptera, Crabronidae).

The life history and sex ratio data of the solitary wasp Trypoxylon agamemnon nesting in trap-nests in southern Brazil was recorded from January 2002 to December 2007. Its sex ratio is strongly female-biased, being bivoltine or multivoltine with until three generations per year. It has two alternative life histories (diapause and direct development) and overlapping generations. In addition to the conflict of interest between the sexes, it is possible that local mate competition occurs between males and may cause a greater investment in the production of females.

The Materials Science beamline upgrade at the Swiss Light Source.

The Materials Science beamline at the Swiss Light Source has been operational since 2001. In late 2010, the original wiggler source was replaced with a novel insertion device, which allows unprecedented access to high photon energies from an undulator installed in a medium-energy storage ring. In order to best exploit the increased brilliance of this new source, the entire front-end and optics had to be redesigned. In this work, the upgrade of the beamline is described in detail. The tone is didactic, from which it is hoped the reader can adapt the concepts and ideas to his or her needs.

A von Hamos x-ray spectrometer based on a segmented-type diffraction crystal for single-shot x-ray emission spectroscopy and time-resolved resonant inelastic x-ray scattering studies.

We report on the design and performance of a wavelength-dispersive type spectrometer based on the von Hamos geometry. The spectrometer is equipped with a segmented-type crystal for x-ray diffraction and provides an energy resolution in the order of 0.25 eV and 1 eV over an energy range of 8000 eV-9600 eV. The use of a segmented crystal results in a simple and straightforward crystal preparation that allows to preserve the spectrometer resolution and spectrometer efficiency. Application of the spectrometer for time-resolved resonant inelastic x-ray scattering and single-shot x-ray emission spectroscopy is demonstrated.

Capturing dynamics with Eiger, a fast-framing X-ray detector.

Eiger is the next-generation single-photon-counting pixel detector following the widely used Pilatus detector. Its smaller pixel size of 75 µm × 75 µm, higher frame rate of up to 22 kHz, and practically zero dead-time (~4 µs) between exposures will further various measurement methods at synchrotron sources. In this article Eiger's suitability for X-ray photon correlation spectroscopy (XPCS) is demonstrated. By exploiting its high frame rate, complementary small-angle X-ray scattering (SAXS) and XPCS data are collected in parallel to determine both the structure factor and collective diffusion coefficient of a nano-colloid suspension. For the first time, correlation times on the submillisecond time scale are accessible with a large-area pixel detector.

MiR-30e and miR-181d control radial glia cell proliferation via HtrA1 modulation.

The precise mechanisms by which microRNAs (miRNAs) contribute to the dynamic regulation of gene expression during the forebrain development are still partly elusive. Here we show that the depletion of miRNAs in the cerebral cortex and hippocampus, via genetic inactivation of Dicer after the onset of forebrain neurogenesis, profoundly impairs the morphological and proliferative characteristics of neural stem and progenitor cells. The cytoarchitecture and self-renewal potential of radial glial (RG) cells located within the cerebral cortex and the hippocampus were profoundly altered, thus causing a significant derangement of both the post natal dorsal sub-ventricular zone and the dentate gyrus. This effect was attributed to the High-temperature requirement A serine peptidase 1 (HtrA1) gene product whose overexpression in the developing forebrain recapitulated some of the aspects of the Dicer(-/-) phenotype. MiR-30e and miR-181d were identified as posttranscriptional negative regulators of HtrA1 by binding to its 3' untranslated region. In vivo overexpression of miR-30e and miR-181d in Dicer(-/-) forebrain rescued RG proliferation defects.

Micrometre resolution of a charge integrating microstrip detector with single photon sensitivity.

A synchrotron beam has been used to test the spatial resolution of a single-photon-resolving integrating readout-chip coupled to a 320 µm-thick silicon strip sensor with a dedicated readout system. Charge interpolation methods have yielded a spatial resolution of σ(x) ≃ 1.8 µm for a 20 µm-pitch strip.

Tamoxifen downregulation of miR-451 increases 14-3-3ζ and promotes breast cancer cell survival and endocrine resistance.

Many estrogen receptor (ER)-positive breast cancers respond well initially to endocrine therapies, but often develop resistance during treatment with selective ER modulators (SERMs) such as tamoxifen. We have reported that the 14-3-3 family member and conserved protein, 14-3-3ζ, is upregulated by tamoxifen and that high expression correlated with an early time to disease recurrence. However, the mechanism by which tamoxifen upregulates 14-3-3ζ and may promote the development of endocrine resistance is not known. Our findings herein reveal that the tamoxifen upregulation of 14-3-3ζ results from its ability to rapidly downregulate microRNA (miR)-451 that specifically targets 14-3-3ζ. The levels of 14-3-3ζ and miR-451 were inversely correlated, with 14-3-3ζ being elevated and miR-451 being at a greatly reduced level in tamoxifen-resistant breast cancer cells. Of note, downregulation of miR-451 was selectively elicited by tamoxifen but not by other SERMs, such as raloxifene or ICI182,780 (Fulvestrant). Increasing the level of miR-451 by overexpression, which decreased 14-3-3ζ, suppressed cell proliferation and colony formation, markedly reduced activation of HER2, EGFR and MAPK signaling, increased apoptosis, and, importantly, restored the growth-inhibitory effectiveness of SERMs in endocrine-resistant cells. Opposite effects were elicited by miR-451 knockdown. Thus, we identify tamoxifen downregulation of miR-451, and consequent elevation of the key survival factor 14-3-3ζ, as a mechanistic basis of tamoxifen-associated development of endocrine resistance. These findings suggest that therapeutic approaches to increase expression of this tumor suppressor-like miR should be considered to downregulate 14-3-3ζ and enhance the effectiveness of endocrine therapies. Furthermore, the selective ability of the SERM tamoxifen but not raloxifene to regulate miR-451 and 14-3-3ζ may assist in understanding differences in their activities, as seen in the STAR (Study of Tamoxifen and Raloxifene) breast cancer prevention trial and in other clinical trials.

[Cardiovascular prevention in the workplace: scientific evidence for the role of health promotion]. / Prevenzione cardiovascolare in ambito lavorativo: evidenze scientifiche per la promozione della salute.

Cardiovascular disorders represent the leading cause of mortality and morbidity in the western world. A large number of working subjects is potentially involved. On this basis, the work environment may be considered an ideal place for health promotion in this field. The recently involvement of Occupational Medicine in health promotion programs represent an ideal condition for the effective implementation of these programs, Scientific literature convincingly show that well characterized interventions, acting on key factors of the cardiovascular risk, such as smoking, diet, physical activity, hypertension, hyperlipidemia, obesity and work-related stress may prevent the development of overt cardiovascular diseases. A proper administration and presentation of these programs is however an essential requisite for their success. Last but not least, the participation of workers, especially of those of low socioeconomic status should be obtained. In order to reach this goal, adequate incentives need to be proposed to workers, including employer-provided paid time off during the work-day for exercise health screenings, or prevention/wellness programs. Although seemingly costly, this approach seems to be fruitful in terms of financial returns in the mid-long term perspective.

Toxicological effects of titanium dioxide nanoparticles: a review of in vitro mammalian studies.

BACKGROUND AND OBJECTIVE: Recent rapid advances in nanotechnology raise concerns about development, production route, and diffusion in industrial and consumer products of titanium dioxide nanoparticles (TiO2-NPs). In fact, compared to recent increase in applications of this nanomaterial, the health effects of human exposure have not been systematically investigated. The aim of this review was to provide a comprehensive overview on the current knowledge regarding the effects of TiO2-NPs on mammalian cells. EVIDENCE AND INFORMATION SOURCES: This review is based on an analysis of the current literature on this topic. STATE OF THE ART: Fine TiO2 particles have been considered as safe and to pose little risk to humans, suggesting that exposure to this material is relatively harmless. However, available data in the literature showed that TiO2-NPs can cause several adverse effects on mammalian cells such as increase of reactive oxygen species (ROS) production and cytokines levels, reduction of cell viability and proliferation, induction of apoptosis and genotoxicity. PERSPECTIVES AND CONCLUSIONS: Additional research is needed to obtain up-to-date knowledge on health effects of TiO2-NPs and to avoid any potential risk correlated to their exposure. Consequently, future studies need to: (1) use an homogeneous and rigorous exposure classification to clarify how the physicochemical properties of TiO2-NPs correlate with their toxicological effects; (2) assess the potential adverse effects of low level exposures to TiO2-NPs, as most of the information currently available originates from studies in which exposure levels were excessively and unrealistically high; (3) identify the possible roles of TiO2-NPs in genotoxicity and carcinogenicity (4) carry out epidemiologic studies of exposed workers to provide an assessment of possible risks correlated to the occupational exposure to TiO2-NPs.

Police job strain during routine activities and a major event.

BACKGROUND: Special police forces are exposed to periods of intense work stress in ensuring public order. AIMS: To explore the relationship between the work context (routine work or special event) of special force policemen and psychological measures of job strain (demand-control) and effort-reward imbalance. METHODS: All policemen assigned to the G8 meeting in L'Aquila, Italy, in July 2009 were invited to complete a questionnaire while engaged in routine work in January 2009 (Time A) and in June 2009 (Time B), while preparing for the special event. RESULTS: Participation rate in the questionnaire study was 292/294 (99%) members of the special police force. Measures of job strain (-0.39, P < 0.001) and effort-reward imbalance (-0.37, P < 0.001) decreased significantly from Time A to Time B. On average, demand decreased from 14.2 ± 1.9 to 12.6 ± 2.7 (P < 0.001), control increased from 11.8 ± 2.5 to 14.4 ± 3.4 (P < 0.001) and social support increased from 17.8 ± 2.9 to 19.0 ± 3.1 (P < 0.001). At the same time, effort decreased from 17.4 ± 3.2 to 11.8 ± 3.8 (P < 0.001), reward grew from 37.6 ± 5.5 to 45.5 ± 7.4 (P < 0.001) and overcommitment dropped from 7.1 ± 2.1 to 6.6 ± 1.7 (P < 0.001). CONCLUSIONS: In special police forces, routine work may be significantly more stressful than a single critical event.

Exposure to thoracic dust, airway symptoms and lung function in cement production workers.

Cement dust exposure has previously been associated with airway symptoms and ventilatory impairment. The aim of the present study was to examine lung function and airway symptoms among employees in different jobs and at different levels of exposure to thoracic dust in the cement production industry. At the start of a 4-yr prospective cohort study in 2007, exposure to cement dust, symptoms and lung function were recorded cross-sectionally in 4,265 employees in 24 European cement plants. Bronchial exposure was assessed by 2,670 full-shift dust samples with cyclones collecting the thoracic aerosol fraction. A job exposure matrix was constructed by grouping dust concentrations according to job type and plant. Elevated odds ratios for symptoms and airflow limitation (range 1.2-2.6 in the highest quartile), but not for chronic bronchitis, were found in the higher quartiles of exposure compared with the lowest quartile. Forced expiratory volume in 1 s (FEV(1)) showed an exposure-response relationship with a 270-mL deficit of FEV(1) (95% CI 190-300 mL) in the highest compared with the lowest exposure level. The results support the hypothesis that exposure to dust in cement production may lead to respiratory symptoms and airway obstruction.

Environmental discomfort and musculoskeletal disorders.

BACKGROUND: Musculoskeletal disorders (MSDs) are the most common occupational disease in Europe, with high prevalence among hospital workers. Both environmental and psychosocial work factors may impact significantly on the development and exacerbation of MSDs. AIMS: To evaluate whether environmental factors at work are associated with MSDs in hospital workers and to investigate potential interactions between environmental and psychosocial risk factors in the workplace that are associated with MSDs. METHODS: A cross-sectional investigation was performed using the Nordic questionnaire to assess MSDs, the IAQ/MM-040 indoor air questionnaire for environmental factors, the demand-control model for job strain and the Goldberg questionnaire for anxiety and depression. The association between environmental factors and MSDs was studied using logistic regression analysis. In addition, the interactions of environmental factors with strain, anxiety and depression for MSDs were examined. RESULTS: Environmental complaints were associated with MSDs. The strongest associations were found between temperature complaints (OR 2.73), noise and light complaints (OR 2.22), other environmental complaints (OR 3.12) and upper limb disorders. A significant interaction between temperature complaints and strain for upper limb disorders (F = 9.52, P < 0.05) was found. CONCLUSIONS: To prevent MSDs, a multi-level approach is needed, including environmental measures and interventions directed to both psychosocial and organizational factors.

[Influence of environmental discomfort on musculoskeletal disorders]. / Influenza dei fattori ambientali sui disturbi muscoloscheletrici.

Musculoskeletal disorders (MSDs) are common among hospital workers. This cross-sectional study on 1744 hospital workers showed strong interaction between temperature complaints (OR 2.73), other environmental complaints (OR 3.12) and upper limbs disorders. A significant interaction between temperature and strain for upper limbs disorders (F = 9.52, p = 0.023) was also found. Environmental and psychosocial factors can interact increasing significantly the risk of MSDs.