Valorizing industrial tobacco wastes within natural clays and chitosan nanocomposites for an ecofriendly insecticide.

We report the engineering of insecticide films based on two mineral clays, montmorillonite and kaolinite, combined to chitosan and/or cellulose acetate originating from cigarette filter and subsequently impregnated with tobacco essential oil extracted from tobacco dust. Both binary composites, i.e. clay and chitosan or clay and cellulose acetate, and ternary composites containing clay, chitosan and cellulose acetate were prepared and characterized by XRD, DLS, ELS, and IR to investigate the nature of interactions within the composites. The two clay minerals showed different kinds of interaction with chitosan: intercalation in the case of Montmorillonite vs adsorption on the external surface for kaolinite. Secondly, the nicotine release from the composites films at different temperatures was studied by in-situ IR. The Montmorillonite composites, particularly the ternary one, showed a better encapsulation of nicotine which release was limited. Finally, the insecticidal activity of the composites was evaluated against the Tribolium castaneum a common wheat pest. The differences observed between montmorillonite and kaolinite composites were rationalized in relation to the nature of interaction between the components. The fumigant bioassay showed promising insecticidal effects in the case of the ternary composite cellulose acetate/chitosan/montmorillonite. Therefore, these eco-friendly nanocomposites can be used efficiently for the sustainable protection of stored cereals.

Optimization of Hydrothermal and Diluted Acid Pretreatments of Tunisian Luffa cylindrica (L.) Fibers for 2G Bioethanol Production through the Cubic Central Composite Experimental Design CCD: Response Surface Methodology.

This paper opens up a new issue dealing with Luffa cylindrica (LC) lignocellulosic biomass recovery in order to produce 2G bioethanol. LC fibers are composed of three principal fractions, namely, α-cellulose (45.80% ± 1.3), hemicelluloses (20.76% ± 0.3), and lignins (13.15% ± 0.6). The optimization of LC fibers hydrothermal and diluted acid pretreatments duration and temperature were achieved through the cubic central composite experimental design CCD. The pretreatments optimization was monitored via the determination of reducing sugars. Then, the 2G bioethanol process feasibility was tested by means of three successive steps, namely, LC fibers hydrothermal pretreatment performed at 96°C during 54 minutes, enzymatic saccharification carried out by means of a commercial enzyme AP2, and the alcoholic fermentation fulfilled with Saccharomyces cerevisiae. LC fibers hydrothermal pretreatment liberated 33.55 g/kg of reducing sugars. Enzymatic hydrolysis allowed achieving 59.4 g/kg of reducing sugars. The conversion yield of reducing sugar to ethanol was 88.66%. After the distillation step, concentration of ethanol was 1.58% with a volumetric yield about 70%.

Enhancement of biofuels production by means of co-pyrolysis of Posidonia oceanica (L.) and frying oil wastes: Experimental study and process modeling.

Energy recovery from lignocellulosic solid marine wastes, Posidonia oceanica wastes (POW) with slow pyrolysis responds to the growing trend of alternative energies as well as waste management. Physicochemical, thermogravimetric (TG/DTG) and spectroscopic (FTIR) characterizations of POW were performed. POW were first converted by pyrolysis at different temperatures (450°C, 500°C, 550°C and 600°C) using a fixed-bed reactor. The obtained products (bio-oil, syngas and bio char) were analyzed. Since the bio-oil yield obtained from POW pyrolysis is low (2wt.%), waste frying oil (WFO) was added as a co-substrate in order to improve of biofuels production. The co-pyrolysis gave a better yield of liquid organic fraction (37wt.%) as well as syngas (CH4,H2…) with a calorific value around 20MJ/kg. The stoichiometric models of both pyrolysis and co-pyrolysis reactions were performed according to the biomass formula: CαHßOγNδSε. The thermal kinetic decomposition of solids was validated through linearized Arrhenius model.

Enzyme immobilization on silane-modified surface through short linkers: fate of interfacial phases and impact on catalytic activity.

We investigated the mechanism of enzyme immobilization on silanized surfaces through coupling agents (cross-linkers) in order to understand the role of these molecules on interfacial processes and their effect on catalytic activity. To this end, we used a model multimeric enzyme (G6PDH) and several cross-linking molecules with different chemical properties, including the nature of the end-group (-NCO, -NCS, -CHO), the connecting chain (aliphatic vs aromatic), and geometrical constraints (meta vs para-disubstituted aromatics). There did not seem to be radical differences in the mechanism of enzyme adsorption according to the linker used as judged from QCM-D, except that in the case of DIC (1,4-phenylene diisocyanate) the adsorption occurred more rapidly. In contrast, the nature of the cross-linker exerted a strong influence on the amount of enzyme immobilized as estimated from XPS, and more unexpectedly on the stability of the underlying silane layer. DIC, PDC (1,4-phenylene diisothiocyanate), or GA (glutaraldehyde) allowed successful enzyme immobilization. When the geometry of the linker was changed from 1,4-phenylene diisothiocyanate to 1,3-phenylene diisothiocyanate (MDC), the silane layer was subjected to degradation, upon enzyme adsorption, and the amount of immobilized molecules was significantly lowered. TE (terephtalaldehyde) and direct enzyme deposition without cross-linker were similar to MDC. The organization of immobilized enzymes also depended on the immobilization procedure, as different degrees of aggregation were observed by AFM. A correlation between the size of the aggregates and the catalytic properties of the enzyme was established, suggesting that aggregation may enhance the thermostability of the multimeric enzyme, probably through a compaction of the 3D structure.

Catalytic activity and thermostability of enzymes immobilized on silanized surface: influence of the crosslinking agent.

In this work, we investigate the influence of crosslinkers on the operational and heat stability of immobilized enzymes on a silanized silicon surface. To this end, glucose-6-phosphate dehydrogenase (G6PDH), a model multimeric enzyme, was attached through bifunctional crosslinkers able to bind covalently the -NH2 in the silane layer and of amine residues in the enzyme. Five bifunctional crosslinkers in the form of "X-spacer-X" were used, differing by the reactive functional groups (X=aldehyde: -CHO, isothiocyanate: -NCS, isocyanate: -NCO), by the nature of the spacer chain (aromatic or aliphatic) or by the geometry (bifunctional groups positioned in meta- or para- on an aromatic ring). A thermostability enhancement has been obtained for enzymes immobilized using 1,4-phenylene diisothiocyanate (PDC) and 1,4-phenylene diisocyanate (DIC). Moreover, using the latter crosslinker, activity was the mostly preserved upon successive uses, thus giving the best operational stability achieved. Changing the geometry of the cross-linker, i.e., 1,4- as compared to 1,3-phenylene diisothiocyanate (PDC and MDC, respectively), has a crucial effect on operational and thermal stabilities. Indeed, among all used crosslinkers, the most important loss was observed for MDC (residual activity after 6 times use is ~16%). Using dialdehyde crosslinkers: glutaraldehyde (GA) and terephtalaldehyde (TE), activity was significantly less well preserved than with DIC and PDC (for GA and TE, a loss of about 50% at 30°C against no loss for PDC and DIC). These effects can be explained by a multipoint attachment model, in which a higher number of anchoring points stabilizes the three-dimensional structure and especially the binding of the two subunits in the active dimer, at the expense of a greater rigidity which is detrimental to the absolute activity. The differences observed with the crosslinkers are mainly due to steric hindrance at the interface which seems to be greatly influenced by the structure and the reactivity of the linkers.

Silane layers on silicon surfaces: mechanism of interaction, stability, and influence on protein adsorption.

In this work the mechanism of (3-aminopropyl)triethoxysilane (APTES) interaction with silicon surfaces is investigated at the molecular level. We studied the influence of experimental parameters such as time, temperature, and concentration on the quality of the APTES layer in terms of chemical properties, morphology, and stability in aqueous medium. This was achieved using a highly sensitive IR mode recently developed, grazing angle attenuated total reflection (GA-ATR). This technique provides structural information on the formed APTES layer. The topography of this layer was investigated by atomic force microscopy in aqueous medium. The hydrophilicity was also studied using contact angle measurement. Combining these techniques enables discussion of the mechanism of silane grafting. Considerable differences were observed depending on the reaction temperature, room temperature or 90 °C. The data suggest the presence of two adsorption sites with different affinities on the oxidized silicon layer. This also allows the optimal parameters to be established to obtain an ordered and stable silane layer. The adsorption of proteins on the APTES layer was achieved and monitored using in situ quartz crystal microbalance with dissipation monitoring and ex situ GA-ATR analyses.

Study of Pd(II) adsorption over titanate nanotubes of different diameters.

Hydrogenotitanates (HNTs) nanotubes with different diameters were prepared by hydrothermal treatment of TiO(2) (P25) followed by washing with HCl aqueous solution. The prepared samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermal analysis and N(2) adsorption/desorption. In order to determine the palladium uptake ability of different HNT samples, the interaction between HNTs and Pd(II) was subsequently studied in aqueous solution at pH 9 (NH(+)(4)/NH(3) buffer). Transmission electron microscopy showed that the diameter of the nanotubes depends on the preparation conditions. Chemical analysis of residual sodium and thermal studies showed that the chemical formula of the two prepared HNT was H(x)Na(2-x)Ti(2)O(5)H(2)O with x=1.61 or 1.65. The HNTs are mesoporous materials with a multi-walled nanotubular structure and high specific surface area. In order to determine the capacity of palladium retention of different HNTs samples, the interaction between HNTs and Pd(II) was subsequently studied in aqueous solution at pH 9 (NH(+)(4)/NH(3) buffer). The adsorption kinetics of Pd(II) on the HNTs was very fast. The isotherms of Pd(II) on the HNTs showed that the adsorption occurred (1) initially through cationic exchange and (2) when the concentration of Pd(II) is high by precipitation of different Pd salts. The adsorption capacity of Pd(II) is strongly altered by the morphology of the HNTs samples.