The effect of the number of strands and knot throws of core suture techniques on the mechanical properties of the repaired flexor tendon.

Flexor tendon injury is a common hand trauma that requires surgical repair. The objective was to compare the repaired strength and gliding resistance with a varied number of repair strands and of square knots using a two-strand-overhand locking (TSOL) knot. First, isolated suture loops with different number of suture strands and number of closing knots were compared in mechanical strength and failure mode. Then, 90 flexor digitorum profundus (FDP) tendons from turkey digits were used for the tendon repair experiment. Both phases followed a similar 3 × 3 matrix comparing the knot type including TSOL+1SK (square knot), TSOL+2SK, and TSOL+3 SK and repair techniques including two-, four-, and six-strand repairs techniques respectively. The repaired tendons were tested for tendon resistance against pulley (friction), maximum force, force at 2 mm displacement, stiffness, and failure mode. Increasing the number of strands and closing square knots increases the tensile strength and stiffness of flexor tendon repairs and isolated suture loops without a significant effect on tendon friction. An increase in the number of square knots have shown increased strength only in Pennington repair, which correlated with the increased number of knot unraveling, a weak knot failure model. Our data demonstrated that increasing the number of strands is effective for improving the overall strength of tendon repair. When a two-strand repair is chosen, increasing knot number can improve repair strength. However, the number of knots appears not affecting repair strength in six-strand repair technique.

Prospective Study Assessing Impact of Ethylene Oxide Sterilization on Endoscopic Ultrasound Image Quality.

BACKGROUND & AIMS: Duodenoscope-associated transmission of infections has raised questions about efficacy of endoscope reprocessing using high-level disinfection (HLD). Although ethylene oxide (ETO) gas sterilization is effective in eradicating microbes, the impact of ETO on endoscopic ultrasound (EUS) imaging equipment remains unknown. In this study, we aimed to compare the changes in EUS image quality associated with HLD vs HLD followed by ETO sterilization. METHODS: Four new EUS instruments were assigned to 2 groups: Group 1 (HLD) and Group 2 (HLD + ETO). The echoendoscopes were assessed at baseline, monthly for 6 months, and once every 3 to 4 months thereafter, for a total of 12 time points. At each time point, review of EUS video and still image quality was performed by an expert panel of reviewers along with phantom-based objective testing. Linear mixed effects models were used to assess whether the modality of reprocessing impacted image and video quality. RESULTS: For clinical testing, mixed linear models showed minimal quantitative differences in linear analog score (P = .04; estimated change, 3.12; scale, 0-100) and overall image quality value (P = .007; estimated change, -0.12; scale, 1-5) favoring ETO but not for rank value (P = .06). On phantom testing, maximum depth of penetration was lower for ETO endoscopes (P < .001; change in depth, 0.49 cm). CONCLUSIONS: In this prospective study, expert review and phantom-based testing demonstrated minimal differences in image quality between echoendoscopes reprocessed using HLD vs ETO + HLD over 2 years of clinical use. Further studies are warranted to assess the long-term clinical impact of these findings. In the interim, these results support use of ETO sterilization of EUS instruments if deemed clinically necessary.

Biomechanical muscle stiffness measures of extensor digitorum explain potential mechanism of McArdle sign.

BACKGROUND: McArdle sign is a phenomenon of impaired gait and muscle weakness that occurs with neck flexion, immediately reversible with neck extension. A recent report measured the specificity of this sign for multiple sclerosis by measuring differences in peak torque of the extensor digitorum between neck extension and flexion. METHODS: This substudy included 73 participants (29 multiple sclerosis, 20 non-multiple sclerosis myelopathies, 5 peripheral nerve disorders, and 19 healthy controls). The effect of neck position was assessed on muscle stiffness and neuromechanical error of the extensor digitorum. FINDINGS: Patients with multiple sclerosis had greater neuromechanical error (sum of squared error of prediction) compared to controls (P = 0.023) and non-multiple sclerosis myelopathies (P = 0.003). Neuromechanical error also provided improved sensitivity/specificity of McArdle sign. Peak torque, muscle stiffness, and neuromechanical error could distinguish multiple sclerosis from other myelopathies with 80% specificity and 97% sensitivity (AUC = 0.95). INTERPRETATION: A decrease in muscle stiffness and neuromechanical error in neck flexion compared to extension are additional indicators for a diagnosis of multiple sclerosis. Analysis of muscle stiffness may provide insights into the pathophysiology of this specific clinical sign for multiple sclerosis. Furthermore, muscle stiffness may provide an additional accurate, simple assessment to evaluate multiple sclerosis therapeutic interventions and disease progression.

In vivo assessment of high-molecular-weight polyethylene core suture tape for intra-articular ligament reconstruction: an animal study.

AIMS: Options for the treatment of intra-articular ligament injuries are limited, and insufficient ligament reconstruction can cause painful joint instability, loss of function, and progressive development of degenerative arthritis. This study aimed to assess the capability of a biologically enhanced matrix material for ligament reconstruction to withstand tensile forces within the joint and enhance ligament regeneration needed to regain joint function. MATERIALS AND METHODS: A total of 18 New Zealand rabbits underwent bilateral anterior cruciate ligament reconstruction by autograft, FiberTape, or FiberTape-augmented autograft. Primary outcomes were biomechanical assessment (n = 17), microCT (µCT) assessment (n = 12), histological evaluation (n = 12), and quantitative polymerase chain reaction (qPCR) analysis (n = 6). RESULTS: At eight weeks, FiberTape alone or FiberTape-augmented autograft demonstrated increased biomechanical stability compared with autograft regarding ultimate load to failure (p = 0.035), elongation (p = 0.006), and energy absorption (p = 0.022). FiberTape-grafted samples also demonstrated increased bone mineral density in the bone tunnel (p = 0.039). Histological evaluation showed integration of all grafts in the bone tunnels by new bone formation, and limited signs of inflammation overall. A lack of prolonged inflammation in all samples was confirmed by quantification of inflammation biomarkers. However, no regeneration of ligament-like tissue was observed along the suture tape materials. Except for one autograft failure, no adverse events were detected. CONCLUSION: Our results indicate that FiberTape increases the biomechanical performance of intra-articular ligament reconstructions in a verified rabbit model at eight weeks. Within this period, FiberTape did not adversely affect bone tunnel healing or invoke a prolonged elevation in inflammation. Cite this article: Bone Joint J 2019;101-B:1238-1247.

McArdle Sign: A Specific Sign of Multiple Sclerosis.

OBJECTIVE: To measure McArdle sign (rapidly reversible weakness induced by neck flexion) both qualitatively and quantitatively and to evaluate its specificity and clinical utility for diagnosis of multiple sclerosis (MS). PATIENTS AND METHODS: In this prospective study, McArdle sign was evaluated by a technician blinded to diagnosis by measuring changes in finger extensor strength in successive trials of neck extension and flexion, first clinically and then with a torque measurement device. We studied 25 healthy controls and 81 patients with finger extensor weakness. Patients were not selected for having McArdle sign. Fifty-two patients had MS, 24 had other myelopathies, and 5 had peripheral nerve lesions accounting for their weakness. The study was conducted between February 1, 2016, and June 30, 2017. RESULTS: The median clinical McArdle sign and the 2 quantitative measures of neck flexion-induced strength reduction were greater in patients with MS than in the other groups (P<.001). Baseline strength did not confound the difference. The area under the receiver operating characteristic curve was 0.84 (95% CI, 0.75-0.93) comparing patients with MS vs healthy controls and 0.84 (95% CI, 0.75-0.93) comparing MS vs patients with other myelopathies. The 2 quantitative and 1 clinical measurement of McArdle sign by the technician who performed the quantitative testing were correlated (r=.57 and r=.58; P<.001), and in turn, the technician's and unblinded referring physician's clinical assessments were correlated (r=.58; P<.001). McArdle sign was evident in some patients who had minor disability and who were in early phases of MS. CONCLUSION: McArdle sign, when defined as greater than 10% neck flexion-induced reduction in strength, is entirely specific and 65% sensitive for a diagnosis of MS when compared with other conditions that mimic MS-associated myelopathy. It may facilitate diagnosis in certain clinical situations. TRIAL REGISTRATION: clinicaltrials.gov Identifier: NCT03122873.

Effect of Direct Electrical Current on Bones Infected with Staphylococcus epidermidis.

We are developing electrical approaches to treat biofilm-associated orthopedic foreign-body infection. Although we have previously shown that such approaches have antibiofilm activity, the effects on bone have not been assessed. Herein, low-amperage 200 µA fixed direct current (DC) was compared with no current, in a rat femoral foreign-body infection model. In the infected group, a platinum implant seeded with S. epidermidis biofilm (105 CFU/cm2), plus 50 µL of a 109 CFU suspension of bacteria, were placed in the femoral medullary cavity of 71 rats. One week later, rats were assigned to one of four groups: infected with no current or DC, or uninfected with no current or DC. After 2 weeks, bones were removed and subjected to histopathology, micro-computed tomography (µCT), and strength testing. Histopathology showed no inflammation or bony changes/remodeling in the uninfected no current group, and some osteoid formation in the DC group; bones from the infected no current group had evidence of inflammation without bony changes/remodeling; along with inflammation, there was moderate osteoid present in the DC group. µCT showed more cortical bone volume and density, trabecular thickness, and cancellous bone volume in the DC group compared with the no current group, for both uninfected and infected bones (p < 0.05). There was no difference in torsional strength or stiffness between the no current versus DC groups, for both infected and uninfected bones (p > 0.05). © 2018 The Authors. JBMR Plus Published by Wiley Periodicals, Inc. on behalf of the American Society for Bone and Mineral Research.

Oritavancin polymethylmethacrylate (PMMA)-compressive strength testing and in vitro elution.

BACKGROUND: Polymethylmethacrylate (PMMA) is used for local antimicrobial delivery in orthopedic infection. Oritavancin is a long half-life lipoglycopeptide with broad activity against Gram-positive bacteria. Herein, we addressed if 7.5% w/w oritavancin mixed into PMMA affects PMMA strength and whether it elutes from PMMA, compared to vancomycin. METHODS: Elution was assessed by placing an oritavancin- or vancomycin-loaded bead in a flow system with human plasma. Compressive strength of bland compared to oritavancin- or vancomycin-loaded PMMA was assessed after 0, 3, and 7 days of soaking in 1 ml of pooled normal human plasma at 37 °C, by testing to failure in axial compression using a servo-hydraulic testing machine. RESULTS: Median compressive strength on days 0, 3, and 7 for bland PMMA compared to oritavancin- or vancomycin-loaded PMMA was 80.1, 79.4, and 72.4 MPa, respectively; 93.3, 86.4, and 65.3 MPa, respectively; and 97.8, 82.7, and 65.9 MPa, respectively. Oritavancin reduced PMMA compressive strength after 3 and 7 days (P = 0.0250 and 0.0039, respectively), whereas vancomycin reduced the PMMA compressive strength after 0, 3, and 7 days (P = 0.0039, 0.0039, and 0.0062, respectively) as compared to bland PMMA. Oritavancin-loaded PMMA had higher compressive strength than vancomycin-loaded PMMA on days 3 and 7 (P = 0.0039 and 0.0062, respectively). Compressive elastic moduli were 1226, 1299, and 1394 MPa for bland PMMA; 1253, 1078, and 1245 MPa for oritavancin-loaded PMMA; and 986, 879, and 779 MPa for vancomycin-loaded PMMA on days 0, 3 and 7, respectively. Oritavancin-loaded PMMA had higher compressive elastic moduli than vancomycin-loaded PMMA on days 0 and 7 (P = 0.0250 and 0.0062, respectively). Following polymerization, 1.0% and 51.9% of the initial amount of oritavancin and vancomycin were detected, respectively. Cmax, Tmax, and AUC0-24 were 1.7 µg/ml, 2 h, and 11.4 µg/ml for oritavancin and 21.4 µg/ml, 2 h, and 163.9 µg/ml for vancomycin, respectively. CONCLUSIONS: Oritavancin-loaded PMMA had higher compressive strength than vancomycin-loaded PMMA on days 3 and 7 and higher compressive elastic moduli than vancomycin-loaded PMMA on days 0 and 7. However, proportionally less oritavancin than vancomycin eluted out of PMMA.

Engineered tendon-fibrocartilage-bone composite and bone marrow-derived mesenchymal stem cell sheet augmentation promotes rotator cuff healing in a non-weight-bearing canine model.

Reducing rotator cuff failure after repair remains a challenge due to suboptimal tendon-to-bone healing. In this study we report a novel biomaterial with engineered tendon-fibrocartilage-bone composite (TFBC) and bone marrow-derived mesenchymal stem cell sheet (BMSCS); this construct was tested for augmentation of rotator cuff repair using a canine non-weight-bearing (NWB) model. A total of 42 mixed-breed dogs were randomly allocated to 3 groups (n = 14 each). Unilateral infraspinatus tendon underwent suture repair only (control); augmentation with engineered TFBC alone (TFBC), or augmentation with engineered TFBC and BMSCS (TFBC + BMSCS). Histomorphometric analysis and biomechanical testing were performed at 6 weeks after surgery. The TFBC + BMSCS augmented repairs demonstrated superior histological scores, greater new fibrocartilage formation and collagen fiber organization at the tendon-bone interface compared with the controls. The ultimate failure load and ultimate stress were 286.80 ± 45.02 N and 4.50 ± 1.11 MPa for TFBC + BMSCS group, 163.20 ± 61.21 N and 2.60 ± 0.97 MPa for control group (TFBC + BMSCS vs control, P = 1.12E-04 and 0.003, respectively), 206.10 ± 60.99 N and 3.20 ± 1.31 MPa for TFBC group (TFBC + BMSCS vs TFBC, P = 0.009 and 0.045, respectively). In conclusion, application of an engineered TFBC and BMSCS can enhance rotator cuff healing in terms of anatomic structure, collagen organization and biomechanical strength in a canine NWB model. Combined TFBC and BMSCS augmentation is a promising strategy for rotator cuff tears and has a high potential impact on clinical practice.

Effects of axial forearm instability on force transmission across the elbow.

BACKGROUND: The interosseous membrane (IOM) and distal radioulnar joint (DRUJ) provide axial stability to the forearm. Our hypothesis was that injury to these structures alters force transmission through the elbow. METHODS: A custom-designed apparatus that applies axial loads from the wrist to the elbow was used to test 10 cadaveric upper limbs under the following simulated conditions (1) intact, (2) DRUJ injury, (3) IOM injury, or (4) IOM + DRUJ injury. IOM injury was simulated by osteotomies of the IOM attachment to the radius, and DRUJ injury was simulated by distal ulnar oblique osteotomy. We applied 160 N of axial force during cyclic and functional range of forearm rotation (40o pronation/40o supination), and force, contact pressure, and contact area through the elbow joint were measured simultaneously. RESULTS: The force across the radiocapitellar joint was significantly higher in the IOM + DRUJ injury and the IOM injury groups than in the intact and DRUJ injury groups. The mean force across the radiocapitellar joint was not significantly different between the intact and DRUJ injury groups or between the IOM + DRUJ injury and the IOM injury groups. Forces across the ulnohumeral joint showed an inverse pattern to those in the radiocapitellar joint. CONCLUSIONS: These findings suggest that injury to the IOM contributes more to the disruption of the normal distribution of axial loads across the elbow than injury to the DRUJ.

Articular Contact Area and Pressure in Posteromedial Rotatory Instability of the Elbow.

BACKGROUND: Joint incongruity in posteromedial rotatory instability (PMRI) has been theorized to determine early articular degenerative changes. Our hypothesis was that the articular contact area and contact pressure differ significantly between an intact elbow and an elbow affected by PMRI. METHODS: Seven cadaveric elbows were tested under gravity varus stress using a custom-made machine designed to simulate muscle loads and allow passive elbow flexion (0° to 90°). The mean contact area and contact pressure data were collected and processed using the Tekscan sensor and software. After testing the intact specimen (intact elbow), a PMRI injury was simulated (PMRI elbow) and the specimen was tested again. RESULTS: The PMRI elbows were characterized by initial joint subluxation and significantly elevated articular contact pressure. Both worsened, corresponding with a reduction in contact area, as the elbow was flexed from 0° until the joint subluxation and incongruity spontaneously reduced (at a mean [and standard error] of 60° ± 5° of flexion), at which point the mean contact pressure decreased from 870 ± 50 kPa (pre-reduction) to 440 ± 40 kPa (post-reduction) (p < 0.001) and the mean contact area increased from 80 ± 8 mm to 150 ± 58 mm (p < 0.001). This reduction of the subluxation was also followed by a shift of the contact area from the coronoid fracture edge toward the lower portion of the coronoid. At the flexion angle at which the PMRI elbows reduced, both the contact area and the contact pressure of the intact elbows differed significantly from those of the PMRI elbows, both before and after the elbow reduction (p < 0.001). CONCLUSIONS: The reduction in contact area and increased contact pressures due to joint subluxation and incongruity could explain the progressive arthritis seen in some elbows affected by PMRI. CLINICAL RELEVANCE: This biomechanical study suggests that the early degenerative changes associated with PMRI reported in the literature could be subsequent to joint incongruity and an increase in contact pressure between the coronoid fracture surface and the trochlea.