Characterizing and Tuning the Properties of Polydiacetylene Films for Sensing Applications.

Self-assembled, polymerized diacetylene (DA) nanostructures and two-dimensional films have been studied over the past two decades for sensor applications because of their straightforward visual readout. DA monomers, when exposed to UV light, polymerize to produce a visibly blue polymer. Blue phase polydiacetylenes (PDAs) when exposed to an external stimuli, such as temperature or UV light, undergo a chromatic phase transition to a fluorescent, visibly red phase. The tunability of the monomer to blue to red chromatic phase transitions by choice of diacetylene monomer in the presence of metal cations is systematically and comprehensively investigated to determine their effects on the properties of PDA Langmuir films. The polymerization kinetics and domain morphology of the PDA films were characterized using polarized fluorescent microscopy, UV-vis-fluorescent spectroscopy, and Fourier transform infrared spectroscopy (FTIR). Increasing the monomer alkyl tail length was found to strongly increase the UV dose necessary to produce optimally blue films and fully red films. A decrease in the polymer domain size was also correlated with longer-tailed DA molecules. Metal cations have a diverse effect on the film behavior. Alkaline-earth metals such as Mg, Ca, and Ba have a negligible effect on the phase transition kinetics but can be used to tune PDA polymer domain sizes. The Ni and Fe cations increase the UV dose necessary to produce red phase PDA films and significantly decrease the polymer domain sizes. The Zn, Cd, and Cu ions exhibit strong directed interactions with the PDA carboxylic acid headgroups, resulting in quenched fluorescence and a unique film morphology. FTIR analysis provides insight into the metal-PDA binding mechanisms and demonstrates that the coordination between the PDA film headgroups and the metal cations can be correlated with changes in the film morphology and kinetics. The findings from these studies will have broad utility for tuning PDA-based sensors for different applications and sensitivity ranges.

A crayfish molar tooth protein with putative mineralized exoskeletal chitinous matrix properties.

Some crustaceans possess exoskeletons that are reinforced with calcium carbonate. In the crayfish Cherax quadricarinatus, the molar tooth, which is part of the mandibular exoskeleton, contains an unusual crystalline enamel-like apatite layer. As this layer resembles vertebrate enamel in composition and function, it offers an interesting example of convergent evolution. Unlike other parts of the crayfish exoskeleton, which is periodically shed and regenerated during the molt cycle, molar mineral deposition takes place during the pre-molt stage. The molar mineral composition transforms continuously from fluorapatite through amorphous calcium phosphate to amorphous calcium carbonate and is mounted on chitin. The process of crayfish molar formation is entirely extracellular and presumably controlled by proteins, lipids, polysaccharides, low-molecular weight molecules and calcium salts. We have identified a novel molar protein termed Cq-M15 from C. quadricarinatus and cloned its transcript from the molar-forming epithelium. Its transcript and differential expression were confirmed by a next-generation sequencing library. The predicted acidic pI of Cq-M15 suggests its possible involvement in mineral arrangement. Cq-M15 is expressed in several exoskeletal tissues at pre-molt and its silencing is lethal. Like other arthropod cuticular proteins, Cq-M15 possesses a chitin-binding Rebers-Riddiford domain, with a recombinant version of the protein found to bind chitin. Cq-M15 was also found to interact with calcium ions in a concentration-dependent manner. This latter property might make Cq-M15 useful for bone and dental regenerative efforts. We suggest that, in the molar tooth, this protein might be involved in calcium phosphate and/or carbonate precipitation.

Layered growth of crayfish gastrolith: about the stability of amorphous calcium carbonate and role of additives.

Previous studies on pre-molt gastroliths have shown a typical onion-like morphology of layers of amorphous mineral (mostly calcium carbonate) and chitin, resulting from the continuous deposition and densification of amorphous mineral spheres on a chitin-matrix during time. To investigate the consequences of this layered growth on the local structure and composition of the gastrolith, we performed spatially-resolved Raman, X-ray and SEM-EDS analysis on complete pre-molt gastrolith cross-sections. Results show that especially the abundance of inorganic phosphate, phosphoenolpyruvate (PEP)/citrate and proteins is not uniform throughout the organ but changes from layer to layer. Based on these results we can conclude that ACC stabilization in the gastrolith takes place by more than one compound and not by only one of these additives.

Nanometer size effects in nucleation, growth and characterization of templated CdS nanocrystal assemblies.

We report on the oriented nucleation of CdS nanocrystals on well-defined polydiacetylene Langmuir film templates. Nucleation on the red phase of polydiacetylene resulted in ordered linear arrays of CdS nanocrystals that are aligned with respect to the template. High resolution transmission electron microscopy showed crystalline particles of ~5 to 8 nm size. Selected area electron diffraction micrographs showed spot patterns which are attributed to the well-defined orientations of both polymorphs: the cubic zinc blende and the hexagonal wurtzite polymorphs of CdS. We present a unique growth mechanism where oriented nucleation of CdS on the polydiacetylene template initially takes place in the zinc blende phase. Beyond a certain size threshold, growth proceeds in the more stable wurtzite phase. This transformation keeps the stacking direction of the close packed planes, while altering only their stacking sequence. Notably, size-confinement effects were observed in electron diffraction patterns from the wurtzite phase. These effects originated from off-axis planes that do not fulfill the Bragg conditions, yet their elongated Bragg rods intersect with the Ewald sphere, giving rise to unexpected reflections.

Enamel-like apatite crown covering amorphous mineral in a crayfish mandible.

Carbonated hydroxyapatite is the mineral found in vertebrate bones and teeth, whereas invertebrates utilize calcium carbonate in their mineralized organs. In particular, stable amorphous calcium carbonate is found in many crustaceans. Here we report on an unusual, crystalline enamel-like apatite layer found in the mandibles of the arthropod Cherax quadricarinatus (freshwater crayfish). Despite their very different thermodynamic stabilities, amorphous calcium carbonate, amorphous calcium phosphate, calcite and fluorapatite coexist in well-defined functional layers in close proximity within the mandible. The softer amorphous minerals are found primarily in the bulk of the mandible whereas apatite, the harder and less soluble mineral, forms a wear-resistant, enamel-like coating of the molar tooth. Our findings suggest a unique case of convergent evolution, where similar functional challenges of mastication led to independent developments of structurally and mechanically similar, apatite-based layers in the teeth of genetically remote phyla: vertebrates and crustaceans.

Effect of metal cations on polydiacetylene Langmuir films.

Polydiacetylene (PDA) Langmuir films (LFs) are a unique class of materials that couple a highly aligned conjugated backbone with tailorable pendant side groups and terminal functionalities. The films exhibit chromatic transitions from monomer to blue polymer and finally to a red phase that can be activated optically, thermally, chemically, and mechanically. The properties of PDA LFs are strongly affected by the presence of metal cations in the aqueous subphase of the film due to their interaction with the carboxylic head groups of the polymer. In the present study the influence of divalent cadmium, barium, copper, and lead cations on the structural, morphological, and optical properties of PDA LFs was investigated by means of surface pressure-molecular area (π-A) isotherms, atomic force microscopy, optical absorbance, and Raman spectroscopy. The threshold concentrations for the influence of metal cations on the film structure, stability, and phase transformation were determined by π-A analyses. It was found that each of the investigated cations has a unique influence on the properties of PDA LFs. Cadmium cations induce moderate phase transition kinetics with reduced domain size and fragmented morphology. Barium cations contribute to stabilization of the PDA blue phase and enhanced linear strand morphology. On the other hand, copper cations enhance rapid formation of the PDA red phase and cause fragmented morphology of the film, while the presence of lead cations results in severe perturbation of the film with only a small area of the film able to be effectively polymerized. The influence of the metal cations is correlated with the solubility product (K(sp)), association strength, and ionic-covalent bond nature between the metal cations and the PDA carboxylic head groups.

In situ molecular NMR picture of bioavailable calcium stabilized as amorphous CaCO3 biomineral in crayfish gastroliths.

Bioavailable calcium is maintained by some crustaceans, in particular freshwater crayfish, by stabilizing amorphous calcium carbonate (ACC) within reservoir organs--gastroliths, readily providing the Ca(2+) needed to build a new exoskeleton. Despite the key scientific and biomedical importance of the in situ molecular-level picture of biogenic ACC and its stabilization in a bioavailable form, its description has eluded efforts to date. Herein, using multinuclear NMR, we accomplish in situ molecular-level characterization of ACC within intact gastroliths of the crayfish Cherax quadricarinatus. In addition to the known CaCO(3), chitin scaffold and inorganic phosphate (Pi), we identify within the gastrolith two primary metabolites, citrate and phosphoenolpyruvate (PEP) and quantify their abundance by applying solution NMR techniques to the gastrolith "soluble matrix." The long-standing question on the physico-chemical state of ACC stabilizing, P-bearing moieties within the gastrolith is answered directly by the application of solid state rotational-echo double-resonance (REDOR) and transferred-echo double-resonance (TEDOR) NMR to the intact gastroliths: Pi and PEP are found molecularly dispersed throughout the ACC as a solid solution. Citrate carboxylates are found < 5 Å from a phosphate (intermolecular CP distance), an interaction that must be mediated by Ca(2+). The high abundance and extensive interactions of these molecules with the ACC matrix identify them as the central constituents stabilizing the bioavailable form of calcium. This study further emphasizes that it is imperative to characterize the intact biogenic CaCO(3). Solid state NMR spectroscopy is shown to be a robust and accessible means of determining composition, internal structure, and molecular functionality in situ.

Solubility and bioavailability of stabilized amorphous calcium carbonate.

Since its role in the prevention of osteoporosis in humans was proven some 30 years ago, calcium bioavailability has been the subject of numerous scientific studies. Recent technology allowing the production of a stable amorphous calcium carbonate (ACC) now enables a bioavailability analysis of this unique form of calcium. This study thus compares the solubility and fractional absorption of ACC, ACC with chitosan (ACC-C), and crystalline calcium carbonate (CCC). Solubility was evaluated by dissolving these preparations in dilute phosphoric acid. The results demonstrated that both ACC and ACC-C are more soluble than CCC. Fractional absorption was evaluated by intrinsically labeling calcium carbonate preparations with (45)Ca, orally administrated to rats using gelatin capsules. Fractional absorption was determined by evaluating the percentage of the administrated radioactive dose per milliliter that was measured in the serum, calcium absorption in the femur, and whole-body retention over a 34-hour period. Calcium serum analysis revealed that calcium absorption from ACC and ACC-C preparations was up to 40% higher than from CCC, whereas retention of ACC and ACC-C was up to 26.5% higher than CCC. Absorbed calcium in the femurs of ACC-administrated rats was 30% higher than in CCC-treated animals, whereas 15% more calcium was absorbed following ACC-C treatment than following CCC treatment. This study demonstrates the enhanced solubility and bioavailability of ACC over CCC. The use of stable ACC as a highly bioavailable dietary source for calcium is proposed based on the findings of this study.

Enantioselective recognition between polydiacetylene nucleolipid monolayers and complementary oligonucleotides.

A two-dimensional bio/synthetic hybrid system at the air-solution interface made of a polymerized diacetylene Langmuir film with nucleobase modified headgroups is presented. The polymerized film presents a crystalline array of nucleobases, capable of specific binding of complementary mononucleoside or oligonucleotide sequences. Mixed monolayers of the linear polyconjugated polydiacetylene (PDA) films derivatized with cytosine (10,12-pentacosadiyne-cytidyl, PDC) monomers and alcohol-terminated diacetylene lipid (10,12-pentacosadiynol, PDOH) at a 3:1 ratio (PDC 75%) were compressed and polymerized at the air-water interface with circular polarized light (CPL) or nonpolarized UV light. Here we report a grazing incidence X-ray diffraction (GIXD) investigation of PDC films polymerized to different chirality and hybridized with complementary ssDNA strands. We have demonstrated enantioselective interactions on synthetic structured interfaces produced by Langmuir surface compression followed by polymerization with circular polarized UV light (CPL). The left- and right-CPL polymerized light exhibit the same well-defined crystalline structure. The observed difference between left- and right-CPL polymerized PDC 75% Langmuir films compressed over the complementary mononucleotide guanosine or hybridized with fully complementary ssG(12)T(5) oligonucleotide in the subphase suggests that they are indeed enantiomeric structures, capable of enantioselective binding of their natural ligand, guanosine, solely as a result of surface induced asymmetry in "left" but not in "right" form. This observation may also be related to the intriguing question of chiral selection during the early period of "Origin of Life". We show that achiral compounds, as a result of irradiation with circular polarized light, can organize in chiral surface structures capable of amplification of biopolymer binding of particular handedness.

Stabilization of amorphous calcium carbonate by phosphate rich organic matrix proteins and by single phosphoamino acids.

Stable amorphous calcium carbonate (ACC) is a unique material produced naturally exclusively as a biomineral. It was demonstrated that proteins extracted from biogenic stable ACC induce and stabilize synthetic ACC in vitro. Polyphosphate molecules were similarly shown to induce amorphous calcium carbonate formation in vitro. Accordingly, we tested the hypothesis that biogenic ACC induction and stabilization is mediated by the phosphorylated residues of phosphoproteins. We show that extracellular organic matrix extracted from gastroliths of the red claw crayfish Cherax quadricarinatus induce stable ACC formation in vitro. The proteinaceous fraction of this organic matrix is highly phosphorylated and is incorporated into the ACC mineral phase during precipitation. We have identified the major phosphoproteins of the organic matrix and showed that they have high calcium binding capacity. Based on the above, in vitro precipitation experiments with single phosphoamino acids were performed, indicating that phosphoserine or phosphothreonine alone can induce the formation of highly stable ACC. The results indicate that phosphoproteins may play a major role in the control of ACC formation and stabilization and that their phosphoamino acid moieties are key components in this process.

Surface structure of Nafion in vapor and liquid.

The microstructure of Nafion varies in response to changes in hydration. Thus, it undergoes a transition from tightly packed bundles of inverted micelles with aqueous cores and fused hydrophobic shells ("macaroni bundles") at low hydrations to normal type ("spaghetti") micelles at high hydrations. It was postulated recently that a similar "macaroni-spaghetti" transition, i.e., breakup of surface-aligned macaroni to randomly oriented spaghetti, takes place at the polymer surface when the external medium is changed from vapor to liquid water, which can explain some puzzling features of Nafion and similar microphase-separated ionomers. The resulting (nonequilibrium) structures may remain confined to a few nanometers thick surface region. Here, this picture is corroborated using grazing-incidence small-angle X-ray scattering (GISAXS), contact angle, and atomic force microscopy (AFM). The enhanced alignment of bundles adjacent to the surface in vapor, similar to the effect of biaxial stretching, is elucidated by GISAXS of spin-cast Nafion films. It is inferred from the characteristic change in relative intensities and position of the ionomer peak in the X-Y (in-plane) and Z (out-of-plane) directions with varying X-ray penetration depths into the film. However, contact angle measurements show that the relatively smooth and very hydrophobic surface of Nafion in vapor transforms to a hydrophilic surface, when vapor as the external medium is replaced with liquid water. In addition, AFM indicates that the surface roughness significantly increases in liquid. The results demonstrate that the surface region of Nafion and similar microphase-separated materials may be indeed subject to drastic structural variations, even though the extremely slow relaxation of the solid matrix may preclude propagation of such changes into the bulk. These effects may have a profound effect on the macroscopic characteristics of Nafion membranes, such as hydration and conductivity, as well as their functioning as ion-selective barriers in electrochemical and other applications.

A protein involved in the assembly of an extracellular calcium storage matrix.

Gastroliths, the calcium storage organs of crustaceans, consist of chitin-protein-mineral complexes in which the mineral component is stabilized amorphous calcium carbonate. To date, only three proteins, GAP 65, gastrolith matrix protein (GAMP), and orchestin, have been identified in gastroliths. Here, we report a novel protein, GAP 10, isolated from the gastrolith of the crayfish Cherax quadricarinatus and specifically expressed in its gastrolith disc. The encoding gene was cloned by partial sequencing of the protein extracted from the gastrolith matrix. Based on an assembled microarray cDNA chip, GAP 10 transcripts were found to be highly (12-fold) up-regulated in premolt gastrolith disc and significantly down-regulated in the hypodermis at the same molt stage. The deduced protein sequence of GAP 10 lacks chitin-binding domains and does not show homology to known proteins in the GenBank data base. It does, however, have an amino acid composition that has similarity to proteins extracted from invertebrate and ascidian-calcified extracellular matrices. The GAP 10 sequence contains a predicted signal peptide and predicted phosphorylation sites. In addition, the protein is phosphorylated and exhibits calcium-binding ability. Repeated daily injections of GAP 10 double strand RNA to premolt C. quadricarinatus resulted in a prolonged premolt stage and in the development of gastroliths with irregularly rough surfaces. These findings suggest that GAP 10 may be involved in the assembly of the gastrolith chitin-protein-mineral complex, particularly in the deposition of amorphous calcium carbonate.

Phase transition kinetics in Langmuir and spin-coated polydiacetylene films.

Thin films of 10,12-pentacosadiynoic acid were prepared using Langmuir and spin-coating techniques and polymerized using a controlled dosage of UV radiation. The radiation-induced phase transitions: from the colorless monomer, via the metastable blue phase, to the red polydiacetylene phase, and finally to degradation of the material, were monitored by optical absorbance spectroscopy. Deconvolution analysis of the absorbance curves allowed us to monitor quantitatively the dynamical changes in the chromatic properties of the films as a function of applied UV radiation dose. Several reaction kinetics models were applied in order to describe the phase transitions in the films. The results present the phase evolution in PDA and compare the kinetics for Langmuir films vs. spin-coated films. Polymerization directly at the air-water interface was found to be two-to-three orders of magnitude faster compared to solid-supported films of the same material. Moreover, we show that the data of the solid supported films is considerably better fitted when a reversible intermediate phase between the blue and the red phases is considered. Furthermore, a shift of the Raman active triple bond supports the presence of the intermediate phase.

Supported lipid bilayer membranes for water purification by reverse osmosis.

Some biological plasma membranes pass water with a permeability and selectivity largely exceeding those of commercial membranes for water desalination using specialized trans-membrane proteins aquaporins. However, highly selective transport of water through aquaporins is usually driven by an osmotic rather mechanical pressure, which is not as attractive from the engineering point of view. The feasibility of adopting biomimetic membranes for water purification driven by a mechanical pressure, i.e., filtration is explored in this paper. Toward this goal, it is proposed to use a commercial nanofiltration (NF) membrane as a support for biomimetic lipid bilayer membranes to render them robust enough to withstand the required pressures. It is shown in this paper for the first time that by properly tuning molecular interactions supported phospholipid bilayers (SPB) can be prepared on a commercial NF membrane. The presence of SPB on the surface was verified and quantified by several spectroscopic and microscopic techniques, which showed morphology close to the desired one with very few defects. As an ultimate test it is shown that hydraulic permeability of the SPB supported on the NF membrane (NTR-7450) approaches the values deduced from the typical osmotic permeabilities of intact continuous bilayers. This permeability was unaffected by the trans-membrane flow of water and by repeatedly releasing and reapplying a 10 bar pressure. Along with a parallel demonstration that aquaporins could be incorporated in a similar bilayer on mica, this demonstrates the feasibility of the proposed approach. The prepared SPB structure may be used as a platform for preparing biomimetic filtration membranes with superior performance based on aquaporins. The concept of SPBs on permeable substrates of the present type may also be useful in the future for studying transport of various molecules through trans-membrane proteins.

Structural transitions in polydiacetylene Langmuir films.

Polydiacetylene (PDA) Langmuir films (LFs) were investigated directly at the air/water interface using in situ synchrotron grazing incidence X-ray diffraction, and ex situ transmissison electron microscopy and diffraction. The films were compressed and polymerized on pure water. A crystallographic model describes the structures and phase transitions of the unpolymerized (monomer) film, via the metastable (blue phase), to the fully stable PDA red phase as a function of irradiation dose. The monomer-to-blue-to-red chromatic phase transitions are accompanied by changes in the in-plane crystal structure and pendant chains packing arrangement from arced alkyl chains (in the monomer and blue phases) to near-vertical closely packed chains in the red phase. Notably, the characteristic linear strand morphology of PDA films can be explained as a direct result of the marked decrease in spacing between adjacent polymer chains upon transition from the blue to the red phase.

Two-photon polymerization of polydiacetylene.

We show that visible light can polymerize diacetylene monomers into polydiacetylene (PDA) in a two-photon process. We monitor the process by measuring Raman intensities of PDA using a Raman laser at 633 nm with variable intensity I and show that the Raman cross section at short times increases as I3, corresponding to a two-photon process. The process generates a relatively stable blue phase PDA, in contrast with UV polymerization that leads to a fast blue to red phase transformation.

A gastrolith protein serving a dual role in the formation of an amorphous mineral containing extracellular matrix.

Despite the proclamation of Lowenstam and Weiner that crustaceans are the "champions of mineral mobilization and deposition of the animal kingdom," relatively few proteins from the two main calcification sites in these animals, i.e., the exoskeleton and the transient calcium storage organs, have been identified, sequenced, and their roles elucidated. Here, a 65-kDa protein (GAP 65) from the gastrolith of the crayfish, Cherax quadricarinatus, is fully characterized and its function in the mineralization of amorphous calcium carbonate (ACC) of the extracellular matrix is demonstrated. GAP 65 is a negatively charged glycoprotein that possesses three predicted domains: a chitin-binding domain 2, a low-density lipoprotein receptor class A domain, and a polysaccharide deacetylase domain. Expression of GAP 65 was localized to columnar epithelial cells of the gastrolith disk during premolt. In vivo administration of GAP 65 dsRNA resulted in a significant reduction of GAP 65 transcript levels in the gastrolith disk. Such gene silencing also caused dramatic structural and morphological deformities in the chitinous-ACC extracellular matrix structure. ACC deposited in these gastroliths appeared to be sparsely packed with large elongated cavities compared with the normal gastrolith, where ACC is densely compacted. ACC spherules deposited in these gastroliths are significantly larger than normal. GAP 65, moreover, inhibited calcium carbonate crystallization in vitro and stabilized synthetic ACC. Thus, GAP 65 is the first protein shown to have dual function, involved both in extracellular matrix formation and in mineral deposition during biomineralization.

Reciprocal changes in calcification of the gastrolith and cuticle during the molt cycle of the red claw crayfish Cherax quadricarinatus.

Mobilization of calcium during the molt cycle from the cuticle to transient calcium deposits is widely spread in crustaceans. The dynamics of calcium transport to transient calcium deposits called gastroliths and to the cuticle over the course of the molt cycle were studied in the crayfish Cherax quadricarinatus. In this species, calcium was deposited in the gastroliths during premolt and transported back to the cuticle during postmolt, shown by digital X-ray radiograph analysis. The predominant mineral in the crayfish is amorphous calcium carbonate embedded in an organic matrix composed mainly of chitin. Scanning electron micrographs of the cuticle during premolt showed that the endocuticle and parts of the exocuticle were the source of most of the labile calcium, while the epicuticle did not undergo degradation and remained mineralized throughout the molt cycle. The gastroliths are made of concentric layers of amorphous calcium carbonate intercalated between chitinous lamella. Measurements of pH and calcium levels during gastrolith deposition showed that calcium concentrations in the gastroliths, stomach, and muscle were about the same (10 to 11 mmol l(-1)). On the other hand, pH varied greatly, from 8.7+/-0.15 in the gastrolith cavity through 7.6+/-0.2 in muscle to 6.9+/-0.5 in the stomach.

Search for hepatopancreatic ecdysteroid-responsive genes during the crayfish molt cycle: from a single gene to multigenicity.

The expression of the vitellogenin gene of the red-claw crayfish Cherax quadricarinatus (CqVg) was previously demonstrated in male crayfish during an endocrinologically induced molt cycle. The hypothesis that this expression is under the direct control of ecdysteroids was tested in this study both in vivo and in vitro. Unlike vitellogenin of insects, CqVg was not found to be ecdysteroid-responsive. Thus, a multigenic approach was employed for the identification of other hepatopancreatic ecdysteroid-responsive genes by a cDNA microarray. For the purposes of this study, a multi-parametric molt-staging technique, based on X-ray detection of gastrolith growth, was developed. To identify ecdysteroid-responsive genes during premolt, the molt cycle was induced by two manipulations, 20-hydroxyecdysone administration and X-organ-sinus gland complex removal; both resulted in significant elevation of ecdysteroids. Two clusters of affected genes (129 and 122 genes, respectively) were revealed by the microarray. It is suggested that only genes belonging to similarly responsive (up- or downregulated) gene clusters in both manipulations (102 genes) could be considered putative ecdysteroid-responsive genes. Some of these ecdysteroid-responsive genes showed homology to genes controlling chitin metabolism, proteases and other cellular activities, while 56.8% were unknown. The majority of the genes were downregulated, presumably by an energetic shift of the hepatopancreas prior to ecdysis. The effect of 20-hydroxyecdysone on representative genes from this group was confirmed in vitro using a hepatopancreas tissue culture. This approach for ecdysteroid-responsive gene identification could also be implemented in other tissues for the elucidation of ecdysteroid-specific signaling pathways during the crustacean molt cycle.

Investigations of antimicrobial peptides in planar film systems.

Planar systems--monolayers and films--constitute a useful platform for studying membrane-active peptides. Here, we summarize varied approaches for studying peptide organization and peptide-lipid interactions at the air/water interface, and focus on three representative antimicrobial membrane--associated peptides-alamethicin, gramicidin, and valinomycin. Experimental data, specifically surface pressure/area isotherms and Brewster angle microscopy images, provided information on peptide association and the effects of the lipid monolayers on peptide surface organization. In general, film analysis emphasized the effects of lipid layers in promoting peptide association and aggregation at the air/water interface. Importantly, the data demonstrated that in many cases peptide domains are phase-separated within the phospholipid monolayers, suggesting that this behavior contributes to the biological actions of membrane-active antimicrobial peptides.