Separation and determination of Se-compounds by liquid chromatography coupled with electrospray mass spectrometry.

A method for Selenocystine and Selenomethionine determination by LC-ES-MS was developed in this work. The mass spectrometer was used in a positive mode and the m/z used for the identification of Selenomethionine and Selenocystine were 198.35 and 337.15, respectively. The selenium species were separated using a LC system. A silica chromatographic column (ZORBAX Eclipse XDB-C(8) of 50 mm length and 2.1 mm internal diameter (particle size 3.5 microm)) was used. The separation was realised in isocratic mode, using methanol:water (1:1) with 1% of acetic acid and a flow rate of 200 microL min(-1). The developed method was precise (RSD of 4.5% and 3.9% for Selenomethionine and Selenocystine, respectively) and sensible (limit of detection (LOD) 0.06 and 0.99 mg L(-1) for selenomethionine and selenocystine, respectively).

Feasibility of pressurization to speed up enzymatic hydrolysis of biological materials for multielement determinations.

The feasibility of pressurized solvents (liquids at a high pressure and/or high temperature without the subcritical point being reached) has been newly investigated to accelerate enzymatic hydrolysis processes of mussel tissue for multielement determinations. The target elements (Al, As, Cd, Co, Cu, Fe, Hg, Li, Mn, Pb, Se, Sr, V, and Zn) were released from dried mussel tissue by action of two proteases (pepsin and pancreatin), and they have been evaluated by inductively coupled plasma optical emission spectrometry (ICP-OES). Variables inherent to the enzymatic activity (pH, ionic strength, temperature, and enzyme mass) and factors affecting pressurization (static time, pressure, and number of cycles) were simultaneously studied by applying a Plackett-Burman design (PBD) as the screening method. Results showed that pH, ionic strength, and temperature were the most statistically significant factors (confidence interval of 95%) under pressurized conditions for pepsin, while pH and ionic strength affected pancreatin activity. This means that metal extraction is mostly attributed to enzymatic activity. The static time (enzymatic hydrolysis time) was found statistically nonsignificant for most of the elements, meaning that the hydrolysis procedure can be finished within a 2-15 min range. For pepsin, optimized conditions (pH 1.0, temperature 40 degrees C, pressure 1500 psi, static time 2 min, and number of cycles 3) gave quantitative extractions for As, Cd, Co, Cu, Hg, Li, Mn, Pb, Se, Sr, V, and Zn. The pepsin mass was 0.05 g, and the solution was Milli-Q water at pH 1.0 (adjusted with hydrochloric acid). For pancreatin, quantitative recoveries were only reached for As, Cd, Cu, Li, Pb, and Sr at room temperature, at a pressure of 1500 psi, for a static time of 2 min and a number of cycles of 3. The extraction solution was a 0.3 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer at a pH of 7.5 working at room temperature. Around 0.5 g of diatomaceous earth was used as dispersing agent for hydrolyses with either enzyme. Analytical performances, such as limits of detection and quantification and repeatability of the overall procedure, have been established. Finally, accuracy of the methods was assessed by analyzing seafood certified reference materials (GBW-08571, DORM-2, DOLT-3, TORT-2), fatty tissues certified reference materials (BCR 185, NIST 1577b), and fibrous certified reference materials (BCR 62, GBW-08501).

Fractionation metallothionein-like proteins in mussels with on line metal detection by high performance liquid chromatography-inductively coupled plasma-optical emission spectrometry.

A rapid method for the determination of Al, Ba, Cu, Fe, Mn, Sr and Zn binding metallothionein-like proteins (MLPs) in mussels (Mytilus galloprovincialis) by inductively coupled plasma-optical emission spectrometry was developed. The method uses a short column (8mmx75mm) anion exchange high performance liquid chromatography (HPLC) with inductively coupled plasma-optical emission spectrometric (ICP-OES) detection. Working in isocratic mode (75mM Tris-HCl at pH 7.4, flow rate at 0.8mlmin(-1)), two major MLPs isoforms (MLP-1 and MLP-2) can be separated in ten minutes. The distribution of basal metals binding MLPs was assessed by on line HPLC and ICP-OES, while the basal contents of metals binding MLPs were obtained after off line HPLC and ICP-OES (collection of the two major fractions and multi-element determination by ICP-OES). The calculated LODs were 81, 6, 10, 13, 30, 9 and 123ngg(-1) for Al, Ba, Cu, Fe, Mn, Sr and Zn binding MLP-1 and MLP-2, respectively. The repeatability of the over-all method (five different mussel cytosols prepared from the same mussel sample and subjected to the off line HPLC-ICP-OES procedure twice) was from 11.2 for Cu to 16.2% for Zn. The method was finally applied to different raft mussels from Ría de Arousa estuary in order to know basal levels of elements binding MLPs.

Selenium speciation in cow milk obtained after supplementation with different selenium forms to the cow feed using liquid chromatography coupled with hydride generation-atomic fluorescence spectrometry.

The purpose of this paper is to develop an easy and quick on-line selenium speciation method (LC-UV-HG-AFS) in cow milk obtained after different supplementation to cow feed. This study focuses on selenium speciation in cow milk after the use of different selenium species (organic selenium as selenised yeast and inorganic selenium as sodium selenite) in the supplementation of forages. Separation was carried out on a muBondapack C(18) column with the positively charged ion-pairing agent tetraethylammonium chloride in the mobile phase. The optimization of pre-reduction conditions was carried out; this step was done with UV irradiation and a heating block to improve the reduction of the different Se-compounds. Variables such as exposure time, hydrochloric acid concentration and temperature were studied. The detection limits for SeCyst(2), Se(IV), SeMet and Se(VI) were 0.4, 0.5, 0.9 and 1.0mugl(-1), respectively. The proposed method was applied to cow milk samples. The milk samples obtained after an organic supplementation of feeding as selenised yeast present three species of selenium, SeCyst2, Se(IV) and SeMet, while only SeCyst2 and Se(IV) are present in milk samples obtained after an inorganic supplementation of feeding.

Multi-element determination in raft mussels by fast microwave-assisted acid leaching and inductively coupled plasma-optical emission spectrometry.

Studies on the application of a short microwave irradiation cycle and the use of diluted acids to extract trace elements from raft mussel samples were developed. Multi-element determinations (Al, Ba, Cd, Cr, Cu, Fe, Mn, Pb, Sn, V and Zn) were carried out by inductively coupled plasma-optical emission spectrometry (ICP-OES). Parameters such as acid/oxidizing reagents (diluted nitric acid, hydrochloric acid and hydrogen peroxide) concentrations, acid/oxidizing solution volume, temperature, ramp time and hold time for the microwave heating were simultaneously studied by using an experimental design approach. The optimum conditions have showed the sample pre-treatment of 10 mussel samples to less than 3.0min when a microwave power of 600W and a controlled temperature of 65 degrees C were used. This time (hold time plus ramp time) is quite shorter than those reported for conventional microwave-assisted acid digestion procedures. Since temperature inside the reactor is not high, the venting time can be shorted to 15min. In addition, the concentration of acid/oxidizing reagents needed to complete the acid leaching (2.5M, 3.0M and 0.5% (m/v) for nitric acid, hydrochloric acid and hydrogen peroxide, respectively) is lower than the required concentration for a conventional microwave-assisted acid digestion (concentrated acids). The proposed method has showed a good repeatability of the overall method, and relative standard deviations between 11 and 2% were reached for 12 replicate microwave-assisted acid leaching and ICP-OES measurements. The method was finally validated by analyzing TORT-1 and GBW-08571 certified reference materials and it was successfully applied to fast multi-element determinations in several raft mussel samples.

Arsenic and antimony distribution in the Ría de Arousa: before and after the Prestige oil tanker sinking.

The behaviour of arsenic and antimony in the Ría de Arousa (Galicia, north west of Spain) and the influence of the Prestige accident in the estuary is evaluated. As and Sb were simultaneously determined by HG-ICPOES in seawater samples after a preconcentration with La in a knotted reactor. The highest As concentration is in the inner and middle parts of the ría where the current is weaker and next to the main ports of the area. The largest Sb concentrations were found in the bay of the ría. Linear variation of concentration vs. salinity for As and As/Sb ratios indicated that there was no pollution in the waters of Arousa. The Prestige oil spillage had no serious influence and the values of arsenic (most of them <1.5 microg L(-1)) are similar to the average oceanic concentration, whereas concentrations for antimony (most of them <0.15 microg L(-1)) are less than the oceanic ones.

Characterization of surface marine sediments from Ría de Arousa estuary according to extractable humic matter content.

Surface marine sediments from Ría de Arousa estuary were analyzed for humic and fulvic acids by UV-visible spectrometry and have been characterized using elemental analysis (carbon, hydrogen and nitrogen elemental composition) and spectrometric data (A2/A4 ratio, absorbancies at 270 and 407 nm and E4/E6 ratio, absorbancies at 465 and 665 nm). These variables have been used as discriminating factors to distinguish of marine and terrestrial origin of humic and fulvic acids in Ría de Arousa surface marine sediments. Principal component analysis, PCA, and cluster analysis, CA, have been used as unsupervised pattern recognition procedures. The half-range central value transformation was used as data pre-treatment to homogenize data. After a Varimax rotation, PCA applied to humic acid data has reveled that spectrometric A2/A4 and E4/E6 ratios are the main dominating features in the first principal component (48.6% of total variance), the humic acid content is the feature with the highest weight in the second principal component (22.9% of the total variability) and the carbon elemental composition domain in the third principal component (13.3% of total variance). Results from PCA have revealed that surface sediments collected at inner-left part of the estuary and at the mouth of the river Ulla belong to the same group. Similarly, PCA has shown that surface sediments from the right mouth of the estuary form a compact group. Taking in account the water circulation in Ría de Arousa estuary, these findings mean that the organic matter in surface sediments from the inner-left part of the estuary derived mainly from terrestrial organic matter while the organic matter in surface sediments from the right mouth of the estuary is mainly derived from marine sources. Finally, it must be noticed that any classification of surface sediments was assessed when applying of PCA and CA from fulvic acids data.

Study of the bioavailability of selenium in cows' milk after a supplementation of cow feed with different forms of selenium.

The purpose of the work described in this paper was to develop an easy and quick in-vitro method for comparing the bioavailability of selenium in cows' milk after different cow feed. The study focuses on bioavailability differences resulting from the use of different selenium species (organic selenium as selenised yeast and sodium selenite) for supplementation of forage. A procedure for determination of selenium in cows' milk and dialysates, by hydride-generation atomic-fluorescence spectrometry (HG-AFS) after microwave-assisted acid digestion, was optimised. The results show it is possible to obtain cows' milk enriched with selenium at different concentration without altering the original composition of the milk. The bioavailability was statistically greater for cows' milk obtained after supplementation of forage with organic selenium at levels of 0.4 and 0.5 microg Se g(-1) than for that obtained after supplementation with inorganic and organic selenium at levels of 0.2 and 0.3 microg Se g(-1).

Pressurized liquid extraction as a novel sample pre-treatment for trace element leaching from biological material.

Pressurized liquid extraction (PLE), commonly used for organic compounds extraction, has been applied for trace element leaching from marine biological material in order to determine major and trace elements (Al, As, Cd, Co, Cu, Fe, Hg, Li, Mn, Pb, Se, Sr, V and Zn). The released elements by formic acid PLE have been evaluated by inductively coupled plasma-optical emission spectrometry (ICP-OES). Different variables, such as formic acid concentration, extraction temperature, static time, extraction steps, pressure, mean particle size and diatomaceous earth (DE) mass/sample mass ratio were simultaneously studied by applying an experimental design approach (Plackett-Burman design (PBD) and central composite design (CCD)). Results showed that the extraction temperature was statistically significant (confidence interval of 95%) for most of the elements (high metal releasing was achieved at high temperatures). In addition, formic acid concentration was also statistically significant (confidence interval of 95%) for metals such as Cd and Cu. Most of the metals can be extracted using the same PLE operating conditions (formic acid concentration of 1.0 M, extraction temperature at 125 degrees C, static time of 5 min, one extraction step, extraction pressure at 500 psi and DE mass/sample mass ratio of 2). Taking in mind PLE requirements at the optimised operating conditions (125 degrees C), a time of 6 min is needed to pre-heat the cell. Therefore, the PLE assisted multi-element leaching is completed after 12 min. Analytical performances, such as limits of detection and quantification, repeatability of the over-all procedure and accuracy, by analysing GBW-08571, DORM-2, DOLT-3 and TORT-2 certified reference materials, were finally assessed.

Selenium content and distribution in cow's milk supplemented with two dietary selenium sources.

The effect of two sources of Se, selenized yeast (Se-Y) and sodium selenite, added to total mixed rations (TMR) fed to cows on Se milk content and distribution in milk components was studied on three farms for 6 weeks. The maximal increase in milk Se was attained with Se-Y supplemented at 0.3 microg g(-1). The effect was immediate, with an increase of 9 microg L(-1) being observed after only 5 days, and remained steady until the last sample at day 40 of Se supplementation. Se distribution in milk components was constant, 53.6, 42.6, and 9.3% in whey, casein, and fat, respectively, and was unaffected by the form of supplementation. The effect of the level of Se-Y supplementation on milk Se was studied on two farms. Increasing dietary Se-Y from 0 to 0.5 microg g(-1) elevated milk Se content from 20 to 39 microg L(-1). Se-enriched cow's milk at different levels can be produced by varying dietary Se supplementation in the form of selenized yeast.

Selenium levels in related biological samples: human placenta, maternal and umbilical cord blood, hair and nails.

A study on selenium levels has been carried out in human placenta, maternal and umbilical cord blood, hair and nails of a group of 50 mothers and in the hair of the newborns. The determinations were perfomed by electrothermal atomic absorption spectrometry. The selenium concentration obtained for each sample type was as follows: For the human placenta the values obtained were between 0.56 and 1.06 microg/g (mean +/- standard deviation: 0.81 +/- 0.02 microg/g). The levels for the umbilical cord blood were 51.1-104.2 microg/l (76.3 +/- 6.5 microg/l). For the maternal blood the values measured were between 57.3 and 117.9 microg/l (90.0 +/- 15.2 microg/l), and for hair and nails were 0.22-1.5 microg/g (0.60 +/- 0.37 microg/g) and 0.46-1.57 microg/g (0.90 +/- 0.27 microg/g), respectively. For the hair of the newborns the values obtained were between 0.40 and 2.53 microg/g (1.04 +/- 0.48 microg/g). The effect of different variables as age, habitat, nutritional index or gestation age of the mothers on the selenium concentration in the samples was studied. The influence of the habitat is significant with a confidence level of 95% for the selenium concentration in maternal blood and umbilical cord blood samples. The influence of the mothers' age is significant with a confidence level of 95% for the selenium concentration in the umbilical cord blood samples. For the placenta samples, the effect of the nutritional index is significant with a confidence level of 95%. There is a positive correlation between samples of umbilical cord blood and the newborns' hair, between placenta and umbilical cord, and between cord blood and maternal blood.

Determination of total selenium and selenium distribution in the milk phases in commercial cow's milk by HG-AAS.

A procedure has been developed for determining the selenium in cow's milk using hydride generation-atomic absorption spectrometry (HG-AAS) following microwave-assisted acid digestion. The selenium distributions in milk whey, fat and micellar casein phases were studied after separating the different phases by ultracentrifugation and determining the selenium in all of them. The detection limits obtained by HG-AAS for the whole milk, milk whey and micellar casein were 0.074, 0.065 and 0.075 microg l(-1), respectively. The accuracy for the whole milk was checked by using a Certified Reference Material CRM 8435 whole milk powder from NIST, and the analytical recoveries for the milk whey and casein micelles were 100.9 and 96.9%, respectively. A mass balance study of the determination of selenium in the different milk phases was carried out, obtaining values of 95.5-100.8%. The total content of selenium was determined in 37 milk samples from 15 different manufacturers, 19 whole milk samples and 18 skimmed milk samples. The selenium levels found were within the 8.5-21 microg l(-1) range. The selenium distributions in the different milk phases were studied in 14 whole milk samples, and the highest selenium levels were found in milk whey (47.2-73.6%), while the lowest level was found for the fat phase (4.8-16.2%). A strong correlation was found between the selenium levels in whole milk and the selenium levels in the milk components.

Ultrasound-assisted solvent extraction of total polycyclic aromatic hydrocarbons from mussels followed by spectrofluorimetric determination.

An ultrasound-assisted solvent extraction procedure has been optimised to speed up total polycyclic aromatic hydrocarbons (T-PAHs) extraction from mussel soft tissue. The T-PAHs releases have been evaluated by spectrofluorimetry (excitation and fluorescence emission wavelengths of 300 and 382nm, respectively, and using chrysene as calibrant). Variables such as sonication time, ultrasound frequency, n-hexane volume, dichloromethane volume, number of repeated extractions with n-hexane and number of repeated extraction with dichloromethane were simultaneously studied by applying a Plackett-Burman design (PBD) approach. Results showed that ultrasound frequency and n-hexane and dichloromethane volumes were statistically significant variables (confidence interval of 95%). These last two variables were finally optimised by using central composite designs (CCD), yielding optimum n-hexane and dichloromethane volumes of 2.5 and 6.5ml, respectively. The lowest T-PAHs releasing at high ultrasound frequency (35kHz) led to choice the lowest ultrasound frequency (17kHz) to perform the extraction. Variables such as sonication time and number of repeated extraction with n-hexane or dichloromethane were statistically non-significant and they were fixed at 10min and the extraction with n-hexane and dichloromethane were performed once. The limit of detection was 0.021mugg(-1) (referred to dried mass), the repeatability of the overall method was 4.7% (n=9) and the analytical recoveries were between 98 and 105%. The proposed method was finally applied to 16 mussel samples (Mytilus galloprovincialis) from Ría de Arousa estuary (Galicia, northwest Spain).

Application of ultrasound-assisted acid leaching procedures for major and trace elements determination in edible seaweed by inductively coupled plasma-optical emission spectrometry.

A new method using diluted reagents (nitric and hydrochloric acids and oxygen peroxide) and ultrasound energy to assist metals acid leaching with from edible seaweed was optimized. The method uses a first sonication at high temperature with hydrochloric acid as a previous stage to an ultrasound-assisted acid leaching with 7ml of an acid solution containing nitric acid, hydrochloric acid and hydrogen peroxide at concentrations of 3.7, 3.0 and 3.0M, respectively. Optimum conditions for the first sonication step were ultrasound energy at 17kHz, sonication temperature at 65 degrees C, an acid volume of 2ml, an hydrochloric acid concentration of 6.0M and a sonication time of 10min. It has been found that the first sonication stage at high temperature with hydrochloric acid is necessary to obtain quantitative recoveries for As, Ba, Fe and V. Otherwise quantitative recoveries were reached for the other elements investigated (Ca, K, Na, Mg, Cd, Cr, Cu, Mn, Ni, Pb and Zn). The repeatability of the ultrasound-assisted acid leaching method was around 10% for all elements. Adequate limit of detection and limit of quantification were reached by using inductively coupled plasma-optical emission spectrometry (ICP-OES) for measurements. The method resulted accurate after analysing several seaweed certified reference materials (IAEA-140/TM, NIES-03 and NIES-09). The method was finally applied to the multi-element determination in edible seaweed samples.

Ultrasound bath-assisted enzymatic hydrolysis procedures as sample pretreatment for the multielement determination in mussels by inductively coupled plasma atomic emission spectrometry.

Ultrasound energy has been applied to speed up enzymatic hydrolysis processes of mussel tissue in order to determine trace and ultratrace elements (As, Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn). The element releases, by action of three proteases (pepsin, pancreatin, trypsin), lipase, and alpha-amylase, have been evaluated by inductively coupled plasma atomic emission spectrometry. Different variables such as pH, sonication temperature, ionic strength, hydrolysis time, ultrasound frequency, extracting volume, and enzyme mass were simultaneously studied by applying an experimental design approach (Plackett-Burman design and central composite design). Results showed that the hydrolysis time was statistically nonsignificant (confidence interval of 95%) for most of the elements and enzymes, meaning that the hydrolysis procedure can be finished within a 30-60-min range. These hydrolysis times are far shorter than those obtained when using thermostatic cameras, between 12 and 24 h. Statistically significant factors were the ultrasound frequency (the highest metals releasing at high-ultrasound frequency), pH, sonication temperature, and ionic strength. All metals can be extracted using the same operating conditions (pH of 1.0 and sodium chloride at 1.0% for pepsin; pH of 7.5, temperature at 37 degrees C, and 0.4 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer for amylase; pH of 8.0 and 0.5 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer for pancreatin; pH of 5.0 and 0.5 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer for lipase; pH of 8.0 and 0.2 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer for trypsin). Analytical performances, such as limits of detection and quantification, repeatability of the overall procedure, and accuracy, by analyzing DORM-1, DORM-2, and TORT-1 certified reference materials, were finally assessed for each enzyme.

Use of enzymatic hydrolysis for the multi-element determination in mussel soft tissue by inductively coupled plasma-atomic emission spectrometry.

A systematic evaluation of different variables affecting the enzymatic hydrolysis of mussel soft tissue by five enzymes, three proteases (pepsin, pancreatin and trypsin), lipase and amylase, has been carried out for the determination of trace elements (As, Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn) by inductively coupled plasma-atomic emission spectrometry (ICP-AES). Enzymatic hydrolysis methods offers advantages such as a less species alteration, safer laboratory conditions and a less contaminant wastes. The enzymatic hydrolysis was performed in an incubation camera Boxcult with orbital and horizontal shaker. Variables affecting the enzymatic hydrolysis process were simultaneously studied by applying a Plackett-Burman design (PBD). For a confidence interval of 95%, the significant factors for all enzymes and for most of the elements were the pH, the incubation temperature and the ionic strength. These significant factors were optimized later by using a central composite design (CCD), which gave optimum conditions at pH of 1, incubation temperature of 37 degrees C and ionic strength fixed by sodium chloride at 0.2M when using pepsin. For pancreatin, trypsin, lipase and amylase there were found two different optimum condition sets. The first one involves the use of a 0.5M phosphate buffer (ionic strength), at a pH of 6 and at an incubation temperature of 37 degrees C, which allows the quantitative extraction of Al, Cr, Mn, Pb and Zn. The second conditions set employees a 0.1M phosphate buffer (ionic strength), a pH of 9 and an incubation temperature at 37 degrees C, and it results adequate to extract As, Cd, Cu, Fe and Ni. Analytical performances, repeatability of the over-all procedure and accuracy, by analyzing DORM-1, DORM-2 and TORT-1 certified reference materials, were finally assessed for each enzyme. Good agreement with certified values has been assessed for most of the elements (As, Cd, Cr, Cu, Mn, Ni, Pb and Zn) when using trypsin, pepsin and/or pancreatin, except for Cd and Pb in DORM-1 and DORM-2 because of the certified contents in such certified reference materials are lower than the limit of detection (0.10 and 0.16mugg(-1) for Cd and Pb, respectively, for the use of trypsin).

Sample pre-treatment methods for the trace elements determination in seafood products by atomic absorption spectrometry.

Different sample pre-treatments for seafood products have been compared with determine trace elements (As, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Se and Zn) by flame atomic absorption spectrometry (FAAS) and electrothermal atomic absorption spectrometry (ETAAS). Classic pre-treatments as microwave assisted-acid digestion and the slurry sampling technique were compared with new procedures such as microwave energy or ultrasound energy assisted-acid leaching process and enzymatic hydrolysis methodologies based on the use of pronase E. The methods were applied to DORM-1 and DOLT-1 reference materials with certified contents for the studied elements. The Student-Newman-Keuls (SNK) method was used to compare with element concentration means obtained with each sample pre-treatment and also the certified concentration means in both reference materials. Multivariate techniques such as principal components analysis (PCA) was also applied to comparative purposes.