Pharmacokinetics of doxycycline hyclate in pigs with a new feed premix formulation.

This study aimed to evaluate the administration of doxycycline hyclate in a long-acting pharmaceutical preparation in pigs when administered either ad libitum as a feed medication or an oral bolus dose. In all instances, the studied dose was 20 mg/kg b.w. A total of 48 healthy crossbred, castrated male pigs (Landrace-Yorkshire) weighing 23 ± 4.3 kg were included in this trial. They were randomly assigned to six groups as follows: two groups for the experimental prototype 1 of doxycycline hyclate administering it ad libitum (Fad-lib) or as forced bolus (Fbolus); two groups for the experimental prototype 2 of doxycycline hyclate as for the former groups (FCad-lib and FCbolus), and two control groups receiving the same dose of doxycycline hyclate, but of a commercial premix, also as previously explained (Cbolus and Cad-lib). Statistical analysis of the mean pharmacokinetic values was carried out with Kruskal-Wallis and Dunn's tests. The relative bioavailability (Fr) of the best prototype, when administered ad libitum (FCad-lib), was five times larger than the reference group (Cadlib). These results allow the proposal that the referred differences achieved in the presented prototypes can mark a notable clinical difference, particularly in pathogens with some resistance.

Analysis of Adverse Drug Reactions in Pediatric Patients with Epilepsy: An Intensive Pharmacovigilance Study.

Epilepsy is a chronic neurological disease characterized by the presence of spontaneous seizures, with a higher incidence in the pediatric population. Anti-seizure medication (ASM) may produce adverse drug reactions (ADRs) with an elevated frequency and a high severity. Thus, the objective of the present study was to analyze, through intensive pharmacovigilance over 112 months, the ADRs produced by valproic acid (VPA), oxcarbazepine (OXC), phenytoin (PHT), and levetiracetam (LEV), among others, administered to monotherapy or polytherapy for Mexican hospitalized pediatric epilepsy patients. A total of 1034 patients were interviewed; 315 met the inclusion criteria, 211 patients presented ADRs, and 104 did not. A total of 548 ASM-ADRs were identified, and VPA, LEV, and PHT were the main culprit drugs. The most frequent ADRs were drowsiness, irritability, and thrombocytopenia, and the main systems affected were hematologic, nervous, and dermatologic. LEV and OXC caused more nonsevere ADRs, and PHT caused more severe ADRs. The risk analysis showed an association between belonging to the younger groups and polytherapy with ADR presence and between polytherapy and malnutrition with severe ADRs. In addition, most of the severe ADRs were preventable, and most of the nonsevere ADRs were nonpreventable.

Exploring the Influence of Spacers in EDTA-ß-Cyclodextrin Dendrimers: Physicochemical Properties and In Vitro Biological Behavior.

The synthesis of a new family of ethylenediaminetetraacetic acid (EDTA) core dimers and G0 dendrimers end-capped with two and four ß-cyclodextrin (ßCD) moieties was performed by click-chemistry conjugation, varying the spacers attached to the core. The structure analyses were achieved in DMSO-d6 and the self-inclusion process was studied in D2O by 1H-NMR spectroscopy for all platforms. It was demonstrated that the interaction with adamantane carboxylic acid (AdCOOH) results in a guest-induced shift of the self-inclusion effect, demonstrating the full host ability of the ßCD units in these new platforms without any influence of the spacer. The results of the quantitative size and water solubility measurements demonstrated the equivalence between the novel EDTA-ßCD platforms and the classical PAMAM-ßCD dendrimer. Finally, we determined the toxicity for all EDTA-ßCD platforms in four different cell lines: two human breast cancer cells (MCF-7 and MDA-MB-231), human cervical adenocarcinoma cancer cells (HeLa), and human lung adenocarcinoma cells (SK-LU-1). The new EDTA-ßCD carriers did not present any cytotoxicity in the tested cell lines, which showed that these new classes of platforms are promising candidates for drug delivery.

Laponite Composites: In Situ Films Forming as a Possible Healing Agent.

A healing material must have desirable characteristics such as maintaining a physiological environment, protective barrier-forming abilities, exudate absorption, easy handling, and non-toxicity. Laponite is a synthetic clay with properties such as swelling, physical crosslinking, rheological stability, and drug entrapment, making it an interesting alternative for developing new dressings. This study evaluated its performance in lecithin/gelatin composites (LGL) as well as with the addition of maltodextrin/sodium ascorbate mixture (LGL MAS). These materials were applied as nanoparticles, dispersed, and prepared by using the gelatin desolvation method-eventually being turned into films via the solvent-casting method. Both types of composites were also studied as dispersions and films. Dynamic Light Scattering (DLS) and rheological techniques were used to characterize the dispersions, while the films' mechanical properties and drug release were determined. Laponite in an amount of 8.8 mg developed the optimal composites, reducing the particulate size and avoiding the agglomeration by its physical crosslinker and amphoteric properties. On the films, it enhanced the swelling and provided stability below 50 °C. Moreover, the study of drug release in maltodextrin and sodium ascorbate from LGL MAS was fitted to first-order and Korsmeyer-Peppas models, respectively. The aforementioned systems represent an interesting, innovative, and promising alternative in the field of healing materials.

Synthesis of ß-Cyclodextrin-Decorated Dendritic Compounds Based on EDTA Core: A New Class of PAMAM Dendrimer Analogs.

In this work, two dendritic molecules containing an ethylenediaminetetraacetic acid (EDTA) core decorated with two and four ß-cyclodextrin (ßCD) units were synthesized and fully characterized. Copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) click chemistry under microwave irradiation was used to obtain the target compounds with yields up to 99%. The classical ethylenediamine (EDA) core present in PAMAM dendrimers was replaced by an EDTA core, obtaining platforms that increase the water solubility at least 80 times compared with native ßCD. The synthetic methodology presented here represents a convenient alternative for the rapid and efficient construction of PAMAM analogs. These molecules are envisaged for future applications as drug carriers.

Boar semen cryopreserved with trehalose-containing liposomes: disaccharide determination and rheological behaviour.

This study aimed to detect intracellular trehalose in boar sperm that were cryopreserved with liposomes and conduct an analysis of its effects on some characteristics of thawed sperm, including rheological properties. First, soybean lecithin cholesterol-based liposomes were produced and characterized in the presence of 300 mM trehalose. Next, semen samples were frozen in two freezing media: a control medium with 300 mM trehalose and an experimental medium supplemented with 300 mM trehalose and 10% liposomes, both of which were thawed and then studied to ascertain their integrity, motility, rheological response, and trehalose quantities by testing two methods of spermatic lysis via high-performance liquid chromatography with an evaporative light-scattering detector (HPLC-ELSD). The results found spherical liposomes measuring 357 nm that were relatively stable in an aqueous medium and had an entrapment efficiency of 73%. An analysis of the cryopreserved ejaculates showed that their viability and motility did not significantly differ between groups (P > 0.05). The viscous response of the samples was influenced by the extracellular medium rather than by the freezing-thawing process, which resulted in a loss of interaction between the cells and cryoprotectants. Finally, intracellular trehalose levels were determined using HPLC-ELSD, with no differences observed (P > 0.05) when comparing both sperm lysis methods. The use of liposomes with trehalose appears to be a promising option for boar semen cryopreservation, with a marked effect on rheological properties. The proposed HPLC-ELSD method was effective for measuring trehalose in cryopreserved cell samples.

Casiopeinas® third generation, with indomethacin: synthesis, characterization, DFT studies, antiproliferative activity, and nanoencapsulation.

Seven new Casiopeinas® were synthesized and properly characterized. These novel compounds have a general formula [Cu(N-N)(Indo)]NO3, where Indo is deprotonated indomethacin and N-N is either bipyridine or phenanthroline with some methyl-substituted derivatives, belonging to the third generation of Casiopeinas®. Spectroscopic characterization suggests a square-based pyramid geometry and voltammetry experiments indicate that the redox potential is strongly dependent on the N-N ligand. All the presented compounds show high cytotoxic efficiency, and most of them exhibit higher efficacy compared to the well-known cisplatin drug and acetylacetonate analogs of the first generation. Computational calculations show that antiproliferative behavior can be directly related to the volume of the molecules. Besides, a chitosan (CS)-polyacrylamide (PNIPAAm) nanogel was synthesized and characterized to examine the encapsulation and release properties of the [Cu(4,7-dimethyl-1,10-phenanthroline)(Indo)]NO3 compound. The results show good encapsulation performance in acidic conditions and a higher kinetic drug release in acidic media than at neutral pH. This result can be described by the Peppas-Sahlin model and indicates a release mechanism predominantly by Fick diffusion.

In vitro release of new designs of modified-release tramadol hydrochloride included in a polymer matrix.

Tramadol reaches therapeutic plasma concentrations in a time interval of 0.5 to 1.7 hours, so it is necessary to dose 4 times/day, which reduces compliance with the dose and the effectiveness of the treatment. Design formulations of tramadol that allow the release time to be prolonged, surpassing those obtained with the commercial product and tramadol without excipients. Several formulations of 5% tramadol hydrochloride were designed in a matrix system based on poloxamer 407 at different concentrations (10%, 14%, 17%, and 20%). In vitro release studies were performed, using a spectrophotometer at a wavelength of 273.15 nm; were compared the results with tramadol without polymeric supplements and with the commercial formulation samples were taken in a period of time from 0.25 to 72 hours, and also compared the use or absence of dialysis membrane with a porosity of 50 kilodaltons was. With the use of the membrane, the designed formulations had a release of 98%, 50%, 23%, 16% at 72 hours, respectively, different from the commercial product and the tramadol formulation without excipients released the 24 hours. Without using dialysis membranes, a 90-100% release was achieved in the 10% and 14% formulation at 36 hours. The 17% and 20% formulation at 48 hours and the commercial formulation and tramadol without excipient were released within 2 hours. Modified release formulations were obtained, which retain and prolong the release of tramadol compared to the commercial product. Therefore, we propose to conduct further in vivo model experiments to confirm our conclusion.

Diseño de estudios Gauge R&R cruzado y anidado para la validación de los modelos matemáticos de Heckel y Ryshkewitch-Duckworth / Design of crossed and nested Gauge R&R studies for the validation of the Heckel and Ryshkewitch-Duckworth mathematical models

INTRODUCCIÓN: Los estudios gauge permiten ganar información sobre el desempeño de procesos y son de utilidad para control de calidad, así como identificación de fuentes de variación. El objetivo del presente estudio, fue diseñar y analizar sistemas de medición para los modelos de Heckel y Ryshkewitch-Duckworth para caracterizar materiales, a través de estudios Gauge R&R. MÉTODO: Estudio Gauge R&R cruzado para evaluar el sistema de medición del peso y estudio Gauge R&R anidado para el sistema de la resistencia a la fractura. RESULTADOS: Ambos estudios cumplieron con los supuestos de normalidad, varianza constante e independencia de los datos, por lo que fue posible determinar la significación de las fuentes de variación (factores) mediante un ANOVA así como su porcentaje de contribución. Para el estudio Gauge R&R cruzado los punzones evaluados contribuyen a la variación de la medición de manera significativa y en un 97,38% de la variación total; los operadores contribuyen en menos del 1% y de manera no significativa y no existió interacción parte-operador. Respecto al estudio Gauge R&R anidado, se identificó que el operador no influyó de manera significativa en la variabilidad de la medición y que ésta es atribuible en un 95% a las diferencias existentes entre las tabletas evaluadas. CONCLUSIONES: Se realizó el diseño, ejecución y análisis de los sistemas de medición, destacando que en ambos estudios la principal fuente de variación fueron las partes evaluadas y que los operadores no contribuyen en la variabilidad de las mediciones, por lo que los estudios pueden usarse para evaluar los modelos matemáticos y durante el control estadístico de un proceso

INTRODUCTION: Gauge studies allow gaining information about the performance of processes and are very useful tools for quality control and identification of variability sources. The objective of the present study was design and analyzes measurement systems for the Heckel and Ryshkewitch-Duckworth models for characterizing materials, through Gauge R&R studies. METHOD: Crossed Gauge R&R study for the evaluation of weight measurement system and nested Gauge R&R study for the system of tablet hardness. RESULTS: Both studies fulfilled with the assumptions of normality, constant variance and data independence, therefore it was possible to estimate the significance of variation sources (factors) through ANOVA and their contribution percentage. The crossed Gauge R&R study showed that the flat punches contributed to variability of the measurement in a significant manner in 97.38% of the total variation of the study; operators did it in less than 1% and they were not statistically significant and there was no Part-Operator interaction. With respect to the nested Gauge R&R study, it was found that the operator did not influence in a statistically significant way in the variability of the measurement and it was attributable in 95% to the existing differences between the tablets evaluated. CONCLUSIONS: Design, run and analysis of the measurement systems was performed, we remark that in both of the studies the main source of variability were the parts evaluated and that operators did not contribute to variability in the measurements; therefore, both studies could be used to evaluate the Heckel and Ryshkewitch-Duckworth mathematical models and also for statistical process control

Toxicity Evaluation of a Novel Rapamycin Liposomal Formulation After Subconjunctival and Intravitreal Injection.

Purpose: Safety and toxicity evaluation of a novel, liposome-encapsulated rapamycin formulation, intended for autoimmune ocular disorders. Methods: The formulation was assessed by micronucleus polychromatic erythrocyte production, irritability by Hen's Egg Test-Chorioallantoic Membrane (HET CAM), sterility, and pyrogenicity testing. Subconjunctival (SCJ) and intravitreal (IVT) administration of the formulation were performed to evaluate subacute and acute toxicity, respectively. Differences between groups in biochemical and hematological parameters were evaluated by analysis of variance and t-tests. Numeric score was assigned to histopathological classification. Electroretinography (ERG) testing was also performed. Data were analyzed by a 1 way no parametric Kruskal-Wallis and the Mann-Whitney tests. Significance was considered when P < 0.05. Results: No significant toxicity directly related to the preparation was detected. Micronucleus count, mucous irritation score, and pyrogenicity results were negative. Pathology demonstrated no damage related to the formulation after SCJ injection. After IVT injection, only lens injury associated with technique was observed. Retinal function was also conserved in ERG. Conclusions: The preparation evaluated offers a good toxicity and safety profile when injected in a SCJ or IVT manner in an animal model. A clinical trial conducted in humans is highly warranted, as it could reveal an alternative immunosuppressive treatment for ophthalmological immune-mediated pathologies.

Comparison of the performance of two grades of metformin hydrochloride elaboration by means of the SeDeM system, compressibility, compactability, and process capability indices.

Quality by design, applied to the development of a pharmaceutical drug, demands scientific methodologies, representing a source of information that will allow for a complete understanding the production process and the materials used for its manufacturing. Although the SeDeM system is a tool that enables a rational development of a product, result does not assure that an assessed material or mixture will be successful in terms of compression, hence, further research will be necessary on these features. The objective of this study was to assess and compare two grades of metformin hydrochloride elaboration: crystalline and direct compression using PXRD, the SeDeM expert system, the Heckel and Ryshkewitch-Duckworth models, as well as process control tools such as control charts and process capability indices to characterize and predict the performance of the materials in a direct compression process. The assessment identified that in spite of dealing with two different technical grades of a material with specific critical quality attributes for each one, PXRD analysis showed we dealt with the same crystalline structure, while the SeDeM system profiles obtained have very close values, and the main differences in materials were observed when subjecting them to conditions that simulate a compaction process with the Ryshkewitch-Duckworth model, in which a 46-times higher mechanical resistance was observed in the direct compression material compared with the crystalline one. The statistical control analysis revealed that only the direct compression material could be used to elaborate tablets whose weight variation was always maintained within the specification and control limits.

Disposition and pharmacokinetics of azithromycin in serum and a lung tissue of two modified-release formulations compared with an immediate-release product on the market.

The aim of this study was to determine the disposition and pharmacokinetics in serum and a lung tissue homogenate in guinea pig (Cavia porcellus) of two experimental formulations of azithromycin, those were included in a modified release polymer matrix (MRF) after oral administration. The results obtained are compared with a commercial form of immediate release. 3 groups of animals were randomly formed in groups of 7 for control and 14 for each group of modified-release formulations (MRFs) were treated with a single dose of 8mg/kg of active principle. In lung tissue, comparisons of concentration of azithromycin, showed statistically significant differences between commercial product, MRF1 and MRF2. All pharmacokinetic parameters for MRF1 and MRF2 were significantly different with the exception of Cmax with respect to commercial product. The treatment of the animals with MRFs may have several benefits over treatment with azithromycin alone since could increase dosing interval for the two MRFs evaluated and reduce the frequency of application, patient stress levels and toxicological risks by accumulation of the active principle.

Recent Advances in Application of Azobenzenes Grafted on Mesoporous Silica Nanoparticles in Controlled Drug Delivery Systems Using Light as External Stimulus.

Hybrid materials based on Mesoporous Silica Nanoparticles (MSN) have attracted plentiful attention due to the versatility of their chemistry, and the field of Drug Delivery Systems (DDS) is not an exception. MSN present desirable biocompatibility, high surface area values, and a well-studied surface reactivity for tailoring a vast diversity of chemical moieties. Particularly important for DDS applications is the use of external stimuli for drug release. In this context, light is an exceptional alternative due to its high degree of spatiotemporal precision and non-invasive character, and a large number of promising DDS based on photoswitchable properties of azobenzenes have been recently reported. This review covers the recent advances in design of DDS using light as an external stimulus mostly based on literature published within last years with an emphasis on usually overlooked underlying chemistry, photophysical properties, and supramolecular complexation of azobenzenes.

Mucoadhesive effect of Curcuma longa extract and curcumin decreases the ranitidine effect, but not bismuth subsalicylate on ethanol-induced ulcer model.

The study of pharmacological interactions between herbal remedies and conventional drugs is important because consuming traditional herbal remedies as supplements or alternative medicine is fairly common and their concomitant administration with prescribed drugs could either have a favorable or unfavorable effect. Therefore, this work aims to determine the pharmacological interactions of a turmeric acetone extract (TAE) and its main metabolite (curcumin) with common anti-ulcer drugs (ranitidine and bismuth subsalicylate), using an ethanol-induced ulcer model in Wistar rats. The analysis of the interactions was carried out via the Combination Index-Isobologram Equation method. The combination index (CI) calculated at 0.5 of the affected fraction (fa) indicated that the TAE or curcumin in combination with ranitidine had a subadditive interaction. The results suggest that this antagonistic mechanism is associated to the mucoadhesion of curcumin and the TAE, determined by rheological measurements. Contrastingly, both the TAE and curcumin combined with bismuth subsalicylate had an additive relationship, which means that there is no pharmacological interaction. This agrees with the normalized isobolograms obtained for each combination. The results of this study suggest that mucoadhesion of curcumin and the TAE could interfere in the effectiveness of ranitidine, and even other drugs.

Outpatient Clinical Trial in Dogs With Leptospirosis Treated With Enrofloxacin Hydrochloride-Dihydrate (ENRO-C).

Pharmacokinetics of enrofloxacin HCl-2H2O (enro-C) in dogs and Monte-Carlo simulations against Leptospira spp. prompted a clinical study to treat the clinically apparent phase of this disease. Leptospirosis was diagnosed by real-time PCR from blood, micro-agglutination titers (MAT), clinical signs and blood parameters of the liver and kidney. In order to determine the clinical ability of the participants to diagnose leptospirosis on the first exam and establish an early treatment to avoid excessive organ damage, patients were clinically classified as: high-risk or medium-risk. Forty-five dogs were included in this trial (from 2017 to early 2019). The treatment consisted of IM injections of a 5% aqueous enro-C suspension (10 mg/kg/day) for 10 days, and subsequently enro-C was administered orally for another 7 days in gelatin capsules. Thirty-four high-risk and 11 medium-risk dogs were treated, including 6 puppies (4 high-risk with ages between 6 to 10 months and 2 medium-risk dogs with an average age of 6 and 7 months). Other ages ranged from 1 to 5 years. Fifteen cases had a history of having received prior treatment with other antibiotics, including all puppies. The clinical diagnostic error was 13.5% (7/52 cases), and only one of the misdiagnosed dogs had been classified as a high-risk patient. Three to 5 days after finishing treatment with enro-C, 82.2% of the dogs were negative to real-time PCR from urine samples and 100% negativity was observed on day 30 after treatment, when antibody titrations dropped to 1:100-1:200. Based on the absence of clinical signs, real-time PCR, and MAT titers, all treated dogs were considered as successful treatments. Within 6-24 months of clinical follow-up, no relapses were recorded. Adverse effects were inconsequential. This study represents the first report of a successful treatment of canine leptospirosis using a fluoroquinolone, and due to its efficacy, it is suggested that enro-C be considered as a viable option for the treatment of this disease.

Characterization of hybrid microparticles/Montmorillonite composite with raspberry-like morphology for Atorvastatin controlled release.

In this work, we prepared a novel composite based on hybrid gelatin carriers and montmorillonite clay (MMT) to analyze its viability as controlled drug delivery system. The objective of this research involves the characterization of composites formed by structured lipid-gelatin micro-particles (MP) and MMT clay. This analysis included the evaluation of the composite according to its rheological properties, morphology (SEM), particle size, XRD, FT-IR, and in vitro drug release. The effect of pH in the properties of the composite is evaluated. A novel raspberry-like or armor MP/MMT clay composite is reported, in which the pH has an important effect on the final structure of the composite for ad-hoc drug delivery systems. For pH values below the isoelectric point, we obtained defined morphologies with entrapment efficiencies up to 67%. The pH level controls the MP/MMT composite release mechanism, restringing drug release in the stomach-like environment. Intended for oral administration, these results evidence that the MP/MMT composite represents an attractive alternative for intestinal-colonic controlled drug delivery systems.

Preformulation Studies of a Liposomal Formulation Containing Sirolimus for the Treatment of Dry Eye Disease.

PURPOSE: The aim of this study was to develop and characterize a liposomal product containing sirolimus to be administered subconjunctivally for the treatment of nonresponsive keratoconjunctivitis sicca (KCS) or dry eye. METHODS: Formulations were prepared using an ethanol injection method and an adaptation of the heating method in pursuance of the most suitable methodology for future industrial production. Liposomes were loaded with either a high dose of 1 mg/mL of sirolimus or a less toxic dose of 0.4 mg/mL. The effects of critical process and formulation parameters were investigated. Liposomes were characterized in terms of size, zeta potential, polydispersity, differential scanning calorimetry, morphology, entrapment efficiency, phospholipid content, thermal stability, and sterility. The formulation was evaluated clinically in dogs with spontaneous KCS. RESULTS: Sterile liposomal dispersions with sizes ranging from 140 to 211 nm, were successfully obtained. High entrapment efficiency of 93%-98% was achieved. The heating method allowed an easier production of liposomes with high entrapment efficiency, to significantly shorten production time and the elimination of the use of alcohol. The poor stability of the obtained liposomes in aqueous dispersion made the inclusion of a lyophilization step necessary to the manufacturing process. In vivo testing of the liposomal sirolimus formulations in the spontaneous KCS dog model have produced promising results, particularly with a sirolimus dose of 1 mg/mL, indicating the need for further development and study of proposed formulations in the treatment of canine KCS. Clinical improvement in tear production in dogs with spontaneous KCS treated with the 1 mg/mL dose product was observed. CONCLUSIONS: The heating method allowed easier production of high entrapment efficiency liposomes to significantly shorten production time and the elimination of the use of alcohol. Tear production was increased in dogs administered with the formulation.

Comparative pharmacokinetics of a new oral long-acting formulation of doxycycline hyclate: A canine clinical trial.

Doxycicline is used in dogs as treatment of several bacterial infections, mycoplasma, chlamydia and rickettsial diseases. However, it requires long treatments and several doses to be effective. The aim of this study was to determine the pharmacokinetics of four formulations of doxycycline hyclate, administered orally, with different proportions of excipients, acrylic acid-polymethacrylate-based matrices, to obtain longer therapeutic levels than conventional formulation. Forty-eight dogs were randomly assigned in five groups to receive a single oral dose (20mg/kg) of doxycycline hyclate without excipients (control) or a long-acting formulation containing doxycycline, acrylic acid polymer, and polymethacrylate in one of the following four proportions: DOX1(1:0.25:0.0035), DOX2(1:0.5:0.0075), DOX3 (1:1:0.015), or DOX4(1:2:0.0225). Temporal profiles of serum concentrations were obtained at several intervals after each treatment. Therapeutic concentrations were observed for 60h for DOX1 and DOX4, 48h for DOX2 and DOX3 and only 24h for DOX-C. None of the pharmacokinetic parameter differed significantly between DOX1 and DOX2 or between DOX3 and DOX4; however, the findings for the control treatment were significantly different compared to all four long-acting formulations. Results indicated that DOX1 had the most adequate pharmacokinetic-pharmacodynamic relationships for a time-dependent drug and had longer release times than did doxycycline alone. However, all four formulations can be effective depend on the minimum effective serum doxycycline concentration of the microorganism being treated. These results suggest that the use of any of these formulations can reduce the frequency of administration, the patient's stress, occurrence of adverse effects and the cost of treatment.

Pharmacokinetics of a peroral single dose of two long-acting formulations and an aqueous formulation of doxycycline hyclate in horses.

BACKGROUND: Doxycyline (Dox) is a semisynthetic antibacterial drug with pharmacological advantages over its parent drug (tetracycline) in the treatment of various bacterial diseases in horses. Yet, at present a horse-customized pharmaceutical formulation is not available. Based on its pharmacokinetic/pharmacodynamic (PK/PD) ratio, Dox is considered a time-dependent antibacterial drug and ideally expected to achieve sustained plasma drug concentrations both at or slightly above the minimal inhibitory concentration (MIC) level for as long as possible between dosing intervals. Hence, the objective of this study was to formulate two long-acting (LA) doxycyline hyclate (Dox-h) formulations for oral administration and define their pharmacokinetics in non-fasted adult horses to obtain better bioavailability and longer mean residence time, features needed to comply better with its pharmacokinetic/pharmacodynamic (PK/PD) ratios. RESULTS: Pharmacokinetic parameters were determined after the oral administration of a single 10 mg/kg bolus dose of two 20% Dox-h formulations: one based on a ß cyclodextrin (Dox-ß) matrix and a second one on a poloxamer (Dox-pol) matrix. The results were compared with the pharmacokinetics of a single 10 mg/kg bolus oral dose of a freshly made aqueous Dox-h solution (Dox-a). Dox-pol showed the greatest values for relative bioavailability (548%); maximum serum concentration (Cmax) value was 1.3 ± 0.7 µg/mL with time to reach the Cmax (Tmax) of 5.9 ± 1.7 h, area under the curve (AUC) of 17.0 ± 2.2 µg h/ml and elimination half-life (T½ ß) of 4.9 ± 1.0 h. CONCLUSIONS: Considering a minimal inhibitory concentration MIC of 0.25 µg/mL, clinically effective plasma concentrations might be obtained for up to 24 h administering Dox-pol. This is an oral paste formulation that might optimize the use of Dox-h in horses in terms of PK/PD ratio congruency, and it is likely that it may also improve prescription compliance due to its ease of administration.

Thermodynamic study of cyclodextrins complexation with benzimidazolic antihelmintics in different reaction media.

The main purpose of this work was to accomplish a comparative study about cyclodextrins complexation equilibria with three benzimidazolic antihelmintics: albendazole (Alb), mebendazole (Meb) and thiabendazole (Thiab). The complexation process with four different cyclodextrins (alpha-, beta-, gamma-, and HP-beta-CDs) was investigated under various temperatures and different reaction media (aqueous solution buffered at pH 7.5, dimethylsulfoxide (DMSO) and DMSO/water at 25/75, 50/50, 75/50 (w/w) mixtures). It was studied by electronic absorption and 1H NMR (NOESY) spectroscopy. Binding constants were determined by electronic absorption spectroscopic method, the DeltaH and DeltaS complexation values were evaluated and discussed according to the diverse factors that affect the chemical interactions in these systems. Solubility has also been determined by the Higuchi and Connors method. In general, albendazole and mebendazole exhibit similar complexation behavior, while thiabendazole acts differently. Classic and non-classic solvophobic effects are mainly the driving and stabilizing forces for complex formation, with the exception in some Thiab-CDs interactions. In all cases, DMSO, an aprotic solvent, should be considered as an active component of the reaction systems.