High-dose-rate interstitial brachytherapy vs external beam radiation for the treatment of complex keloids.

Postoperative external beam radiation therapy (EBRT) with superficial X-rays or electrons and high-dose-rate brachytherapy (HDR BT) are both viable options for managing keloid scars. However, complex keloid scars are especially challenging to manage. We aim to compare the benefit and challenges between interstitial HDR BT and electron EBRT in treating the complex keloids. Three patients with 7 complex keloids: 3 jaw lines, 1 postauricular, 1 posterior neck, and 2 chest walls are included in this study. All patients are treated to 6 Gy x 3 fractions with HDR BT using the flexible interstitial catheters, and electron EBRT plans were created retrospectively for dosimetric comparison. The average D90 is 21.8 ± 8.3 Gy (1 SD) (121%) and 16.9 ± 1.9 Gy (1SD) (94%) in HDR and EBRT plans, respectively. The average treatment time was 7 minutes per patient (range: 6 - 8.5 minutes) for the HDR BT. Dosimetric comparison reveals that HDR plans provide superior coverage to the keloid scars than the EBRT plans. Clinical workflow is streamlined with HDR procedures. The cosmetic outcome with the interstitial HDR BT is satisfactory.

Quantitative Medical Physics National Job Data Distribution Analysis.

PURPOSE: The purpose of this study was to investigate the contemporary distribution of medical physics (MP) employment opportunities across the United States. METHODS AND MATERIALS: An annual record (2018-2019) of advertised full-time MP jobs was created using publicly available information from the American Association of Physicists in Medicine and Indeed websites. Listed jobs were categorized based on position name, work experience, job function, and geographic region. To account for regional population differences, a preponderance of employment opportunities per 10 million people was computed. Using Commission on Accreditation of Medical Physics Education Programs residency accreditation data, the nationwide locations of the MP training centers and the number of residency positions per annum were identified. A chi-square goodness-of-fit test was used for statistical analysis. RESULTS: A total of 441 unique MP jobs were identified nationwide per annum (2018-2019). The highest percentage of MP jobs was reported from the South region (33.6%), and the lowest (17.2%) was from the West. Analysis revealed that 148 jobs (33.6%) were academic and 293 (66.4%) were nonacademic. The South had the most academic jobs overall (31.8%), whereas the West had the fewest (13.5%). Regionally, the highest percentage of academic jobs (46.9%) was reported from the Northeast, whereas the West had the lowest percentage (26.3%). The analysis of academic versus nonacademic job comparison by regions showed statistically significant differences (P = .0133). The Midwest and the West regions, respectively, showed the highest (18.2) and lowest (10.24) number of jobs per unit population, measured in 10 million. CONCLUSIONS: To our knowledge, this is one of the first national quantitative job data analyses of MP job distributions. This study revealed the level of demand for qualified candidates in 2018 to 2019, showing an imbalance between academic and nonacademic positions across the regions of the United States. Moreover, the geographic distribution of job listings deviated significantly from expectation given the relative population of each region.

Scatter imaging during lung stereotactic body radiation therapy characterized with phantom studies.

By collecting photons scattered out of the therapy beam, scatter imaging creates images of the treated volume. Two phantoms were used to assess the possible application of scatter imaging for markerless tracking of lung tumors during stereotactic body radiation therapy (SBRT) treatment. A scatter-imaging camera was assembled with a CsI flat-panel detector and a 5 mm diameter pinhole collimator. Scatter images were collected during the irradiation of phantoms with megavoltage photons. To assess scatter image quality, spherical phantom lung tumors of 2.1-2.8 cm diameters were placed inside a static, anthropomorphic phantom. To show the efficacy of the technique with a moving target (3 cm diameter), the position of a simulated tumor was tracked in scatter images during sinusoidal motion (15 mm amplitude, 0.25 Hz frequency) in a dynamic lung phantom in open-field, dynamic conformal arc (DCA), and volumetric modulated arc therapy (VMAT) deliveries. Anatomical features are identifiable on static phantom scatter images collected with 10 MU of delivered dose (2.1 cm diameter lung tumor contrast-to-noise ratio of 4.4). The contrast-to-noise ratio increases with tumor size and delivered dose. During dynamic motion, the position of the 3.0 cm diameter lung tumor was identified with a root-mean-square error of 0.8, 1.2, and 2.9 mm for open field (0.3 s frame integration), DCA (0.5 s), and VMAT (0.5 s), respectively. Based on phantom studies, scatter imaging is a potential technique for markerless lung tumor tracking during SBRT without additional imaging dose. Quality scatter images may be collected at low, clinically relevant doses (10 MU). Scatter images are capable of sub-millimeter tracking precision, but modulation decreases accuracy.

Compton scatter imaging: A promising modality for image guidance in lung stereotactic body radiation therapy.

PURPOSE: Lung stereotactic body radiation therapy (SBRT) requires delivering large radiation doses with millimeter accuracy, making image guidance essential. An approach to forming images of patient anatomy from Compton-scattered photons during lung SBRT is presented. METHODS: To investigate the potential of scatter imaging, a pinhole collimator and flat-panel detector are used for spatial localization and detection of photons scattered during external beam therapy using lung SBRT treatment conditions (6 MV FFF beam). MCNP Monte Carlo software is used to develop a model to simulate scatter images. This model is validated by comparing experimental and simulated phantom images. Patient scatter images are then simulated from 4DCT data. RESULTS: Experimental lung tumor phantom images have sufficient contrast-to-noise to visualize the tumor with as few as 10 MU (0.5 s temporal resolution). The relative signal intensity from objects of different composition as well as lung tumor contrast for simulated phantom images agree quantitatively with experimental images, thus validating the Monte Carlo model. Scatter images are shown to display high contrast between different materials (lung, water, bone). Simulated patient images show superior (~double) tumor contrast compared to MV transmission images. CONCLUSIONS: Compton scatter imaging is a promising modality for directly imaging patient anatomy during treatment without additional radiation, and it has the potential to complement existing technologies and aid tumor tracking and lung SBRT image guidance.

Dosimetric effects of saline- versus water-filled balloon applicators for IORT using the model S700 electronic brachytherapy source.

PURPOSE: The Xoft Axxent Electronic Brachytherapy System (Xoft, Inc., San Jose, CA) is a viable option for intraoperative radiation therapy (IORT) treatment of early-stage breast cancer. The low-energy (50-kVp) X-ray source simplifies shielding and increases relative biological effectiveness but increases dose distribution sensitivity to medium composition. Treatment planning systems typically assume homogenous water for brachytherapy dose calculations, including precalculated atlas plans for Xoft IORT. However, Xoft recommends saline for balloon applicator filling. This study investigates dosimetric differences due to increased effective atomic number (Zeff) for saline (Zeff = 7.56) versus water (Zeff = 7.42). METHODS: Balloon applicator diameters range from 3 to 6 cm. Monte Carlo N-Particle software is used to calculate dose at the surface (Ds) of and 1 cm away (D1cm) from the water-/saline-filled balloon applicator using a single dwell at the applicator center as a simple estimation of the dosimetry and multiple dwells simulating the clinical dose distributions for the atlas plans. RESULTS: Single-dwell plans show a 4.4-6.1% decrease in Ds for the 3- to 6-cm diameter applicators due to the saline. Multidwell plans show similar results: 4.9% and 6.4% Ds decrease, for 4-cm and 6-cm diameter applicators, respectively. For the single-dwell plans, D1cm decreases 3.6-5.2% for the 3- to 6-cm diameter applicators. For the multidwell plans, D1cm decreases 3.3% and 5.3% for the 4-cm and 6-cm applicators, respectively. CONCLUSIONS: The dosimetric effect introduced by saline versus water filling for Xoft balloon applicator-based IORT treatments is ∼5%. Users should be aware of this in the context of both treatment planning and patient outcome studies.

Characterization of Compton-scatter imaging with an analytical simulation method.

By collimating the photons scattered when a megavoltage therapy beam interacts with the patient, a Compton-scatter image may be formed without the delivery of an extra dose. To characterize and assess the potential of the technique, an analytical model for simulating scatter images was developed and validated against Monte Carlo (MC). For three phantoms, the scatter images collected during irradiation with a 6 MV flattening-filter-free therapy beam were simulated. Images, profiles, and spectra were compared for different phantoms and different irradiation angles. The proposed analytical method simulates accurate scatter images up to 1000 times faster than MC. Minor differences between MC and analytical simulated images are attributed to limitations in the isotropic superposition/convolution algorithm used to analytically model multiple-order scattering. For a detector placed at 90° relative to the treatment beam, the simulated scattered photon energy spectrum peaks at 140-220 keV, and 40-50% of the photons are the result of multiple scattering. The high energy photons originate at the beam entrance. Increasing the angle between source and detector increases the average energy of the collected photons and decreases the relative contribution of multiple scattered photons. Multiple scattered photons cause blurring in the image. For an ideal 5 mm diameter pinhole collimator placed 18.5 cm from the isocenter, 10 cGy of deposited dose (2 Hz imaging rate for 1200 MU min-1 treatment delivery) is expected to generate an average 1000 photons per mm2 at the detector. For the considered lung tumor CT phantom, the contrast is high enough to clearly identify the lung tumor in the scatter image. Increasing the treatment beam size perpendicular to the detector plane decreases the contrast, although the scatter subject contrast is expected to be greater than the megavoltage transmission image contrast. With the analytical method, real-time tumor tracking may be possible through comparison of simulated and acquired patient images.

Automated survey of 8000 plan checks at eight facilities.

PURPOSE: To identify policy and system related weaknesses in treatment planning and plan check work-flows. METHODS: The authors' web deployed plan check automation solution, PlanCheck, which works with all major planning and record and verify systems (demonstrated here for mosaiq only), allows them to compute violation rates for a large number of plan checks across many facilities without requiring the manual data entry involved with incident filings. Workflows and failure modes are heavily influenced by the type of record and verify system used. Rather than tackle multiple record and verify systems at once, the authors restricted the present survey to mosaiq facilities. Violations were investigated by sending inquiries to physicists running the program. RESULTS: Frequent violations included inadequate tracking in the record and verify system of total and prescription doses. Infrequent violations included incorrect setting of patient orientation in the record and verify system. Peaks in the distribution, over facilities, of violation frequencies pointed to suboptimal policies at some of these facilities. Correspondence with physicists often revealed incomplete knowledge of settings at their facility necessary to perform thorough plan checks. CONCLUSIONS: The survey leads to the identification of specific and important policy and system deficiencies that include: suboptimal timing of initial plan checks, lack of communication or agreement on conventions surrounding prescription definitions, and lack of automation in the transfer of some parameters.

Reporting small bowel dose in cervix cancer high-dose-rate brachytherapy.

Small bowel (SB) is an organ at risk (OAR) that may potentially develop toxicity after radiotherapy for cervix cancer. However, its dose from brachytherapy (BT) is not systematically reported as in other OARs, even with image-guided brachytherapy (IGBT). This study aims to introduce consideration of quantified objectives for SB in BT plan optimization and to evaluate the feasibility of sparing SB while maintaining adequate target coverage. In all, 13 patients were included in this retrospective study. All patients were treated with external beam radiotherapy (EBRT) 45Gy in 25 fractions followed by high dose rate (HDR)-BT boost of 28Gy in 4 fractions using tandem/ring applicator. Magnetic resonance imaging (MRI) and computed tomographic (CT) images were obtained to define the gross tumor volume (GTV), high-risk clinical target volume (HR-CTV) and OARs (rectum, bladder, sigmoid colon, and SB). Treatment plans were generated for each patient using GEC-ESTRO recommendations based on the first CT/MRI. Treatment plans were revised to reduce SB dose when the [Formula: see text] dose to SB was > 5Gy, while maintaining other OAR constraints. For the 7 patients with 2 sets of CT and MRI studies, the interfraction variation of the most exposed SB was analyzed. Plan revisions were done in 6 of 13 cases owing to high [Formula: see text] of SB. An average reduction of 19% in [Formula: see text] was achieved. Meeting SB and other OAR constraints resulted in less than optimal target coverage in 2 patients (D90 of HR-CTV < 77Gyαß10). The highest interfraction variation was observed for SB at 16 ± 59%, as opposed to 28 ± 27% for rectum and 21 ± 16% for bladder. Prospective reporting of SB dose could provide data required to establish a potential correlation with radiation-induced late complication for SB.

Thermal effusivity changes as a precursor to moist desquamation.

Skin toxicity is a ubiquitous side effect in radiotherapy and can be difficult to predict. Moist desquamation in cancer patients can decrease quality of life and occasionally demand unplanned treatment breaks thus worsening outcome. In breast cancer patients, moist desquamation occurs approximately one-third of the time, and while avenues such as intensity-modulated radiation therapy exist to decrease skin side effects, they may be prohibitively expensive to distribute widely. To selectively target patients who are at risk for high skin toxicity, toxicity prediction beyond heuristics is required. This study presents 3D thermal tomography, a translation technology that employs active thermal imaging to map the thermal effusivity of skin. Irradiated mice were imaged throughout reaction development to establish a correlation between effusivity changes and eventual toxicity severity. Female hairless mice (n = 11) were anesthetized and irradiated to 40 Gy in one fraction using a 1 cm Leipzig brachytherapy applicator with an Ir-192 source. After irradiation, thermal imaging was conducted daily with a flash lamp and infrared camera. Effusivity was calculated using custom software and tracked within irradiated and contralateral control regions. Mice were retrospectively grouped into high-grade (moist desquamation present, n = 6) and low-grade (n = 5). All mice showed an increase in the relative average effusivity difference among the treated and control regions between irradiation and peak reaction between 12 and 15 days after irradiation. The high-grade group showed an earlier increase in relative average effusivity difference (mean 1.7 days after irradiation versus 4.4 days after irradiation) than the low-grade group, and had a significantly greater relative average effusivity difference between 2-5 days after irradiation. We concluded that 3D thermal tomography is quick, non-invasive, non-ionizing and exhibited a correlative difference between mice that eventually developed moist desquamation and those that only presented dry desquamation. With further development, it may prove to be a useful tool in the clinic for differentiating patients who require preventative measures to reduce skin toxicity.

A simplified technique for delivering total body irradiation (TBI) with improved dose homogeneity.

PURPOSE: Total body irradiation (TBI) with megavoltage photon beams has been accepted as an important component of management for a number of hematologic malignancies, generally as part of bone marrow conditioning regimens. The purpose of this paper is to present and discuss the authors' TBI technique, which both simplifies the treatment process and improves the treatment quality. METHODS: An AP/PA TBI treatment technique to produce uniform dose distributions using sequential collimator reductions during each fraction was implemented, and a sample calculation worksheet is presented. Using this methodology, the dosimetric characteristics of both 6 and 18 MV photon beams, including lung dose under cerrobend blocks was investigated. A method of estimating midplane lung doses based on measured entrance and exit doses was proposed, and the estimated results were compared with measurements. RESULTS: Whole body midplane dose uniformity of ±10% was achieved with no more than two collimator-based beam modulations. The proposed model predicted midplane lung doses 5% to 10% higher than the measured doses for 6 and 18 MV beams. The estimated total midplane doses were within ±5% of the prescribed midplane dose on average except for the lungs where the doses were 6% to 10% lower than the prescribed dose on average. CONCLUSIONS: The proposed TBI technique can achieve dose uniformity within ±10%. This technique is easy to implement and does not require complicated dosimetry and/or compensators.

Helical tomotherapy delivery of an IMRT boost in lieu of interstitial brachytherapy in the setting of gynecologic malignancy: feasibility and dosimetric comparison.

Interstitial brachytherapy is an important means by which to improve local control in gynecologic malignancy when intracavitary brachytherapy is untenable. Patients unable to receive brachytherapy have traditionally received conventional external beam radiation alone with modest results. We investigated the ability of Tomotherapy (Tomotherapy Inc., Madison, WI) to replace interstitial brachytherapy. Six patients were selected. The planning CT of each patient was contoured with the planning target volume (PTV), bladder, rectum, femoral heads, and bowel. Identical contour sets were exported to Tomotherapy and Nucletron PLATO (Nucletron B.V., Veenendaal, The Netherlands). With Tomotherapy, the PTV was prescribed 31 Gy in 5 fractions to 90% of the volume. With PLATO, 600 cGy × 5 fractions was prescribed to the surface of the PTV. Dose delivered was normalized to 2 Gy fractions (EQD2) and added to a hypothetical homogenous 45-Gy pelvic dose. Tomotherapy achieved a D90 of 87 Gy EQD2 versus 86 Gy with brachytherapy. PTV dose was more homogeneous with tomotherapy. The dose to the most at-risk 2 mL of bladder and rectum with Tomotherapy was of 78 and 71 Gy EQD2 versus 81 and 75 Gy with brachytherapy. Tomotherapy delivered more dose to the femoral heads (mean 1.23 Gy per fraction) and bowel. Tomotherapy was capable of replicating the peripheral dose achieved with brachytherapy, without the PTV hotspots inherent to interstitial brachytherapy. Similar maximum doses to bowel and bladder were achieved with both methods. Excessive small bowel and femoral head toxicity may result if previous pelvic irradiation is not planned accordingly. Significant challenges related to interfraction and intrafraction motion must be overcome if treatment of this nature is to be contemplated.

Comparison of tumor and normal tissue dose for accelerated partial breast irradiation using an electronic brachytherapy eBx source and an Iridium-192 source.

The objective of this study has been to compare treatment plans for patients treated with electronic brachytherapy (eBx) using the Axxent System as adjuvant therapy for early stage breast cancer with treatment plans prepared from the same CT image sets using an Ir-192 source. Patients were implanted with an appropriately sized Axxent balloon applicator based on tumor cavity size and shape. A CT image of the implanted balloon was utilized for developing both eBx and Ir-192 brachytherapy treatment plans. The prescription dose was 3.4 Gy per fraction for 10 fractions to be delivered to 1 cm beyond the balloon surface. Iridium plans were provided by the sites on 35 of the 44 patients enrolled in the study. The planning target volume coverage was very similar when comparing sources for each patient as well as between patients. There were no statistical differences in mean %V100. The percent of the planning target volume in the high dose region was increased with eBx as compared with Iridium (p < 0.001). The mean maximum calculated skin and rib doses did not vary greatly between eBx and Iridium. By contrast, the doses to the ipsilateral lung and the heart were significantly lower with eBx as compared with Iridium (p < 0.0001). The total nominal dwell times required for treatment can be predicted by using a combination of the balloon fill volume and planned treatment volume (PTV). This dosimetric comparison of eBx and Iridium sources demonstrates that both forms of balloon-based brachytherapy provide comparable dose to the planning target volume. Electronic brachytherapy is significantly associated with increased dose at the surface of the balloon and decreased dose outside the PTV, resulting in significantly increased tissue sparing in the heart and ipsilateral lung.

Detection of electron beam energy variations using a computed radiography system.

A method to evaluate the electron beam energy constancy by employing the computed radiography (CR) system has been developed. In this method, a right triangular plastic wedge is used to produce a curve of the CR storage phosphor plate signal versus the wedge thickness. The curve, which resembles the percentage depth ionization curve of the clinical electron beams, can be used to derive the energy constancy metric EC(50). The sensitivity of the method was tested using polystyrene sheets of variable thicknesses. For electron energies up to 12 MeV, energy changes induced by 1.5 mm thick polystyrene can be detected, while a 2.3 mm thick polystyrene sheet is required for higher energies. The measurements were carried out over a two-year period. The results showed a good reproducibility with the use of the same CR plate and cassette, and without the requirement of calibration procedures. The two-year range of the EC(50) was within the 99% confidence intervals, and the standard deviation of the EC(50) was measured to be from 0.3 to 0.4 mm for different beam energies. This technique provides an efficient and accurate method to perform the electron beam energy check and could be used by centers equipped with the CR system without requiring additional detection devices.

Evaluation of four volume-based image registration algorithms.

We evaluated 4 volume-based automatic image registration algorithms from 2 commercially available treatment planning systems (Philips Syntegra and BrainScan). The algorithms based on cross correlation (CC), local correlation (LC), normalized mutual information (NMI), and BrainScan mutual information (BSMI) were evaluated with: (1) the synthetic computed tomography (CT) images, (2) the CT and magnetic resonance (MR) phantom images, and (3) the CT and MR head image pairs from 12 patients with brain tumors. For the synthetic images, the registration results were compared with known transformation parameters, and all algorithms achieved accuracy of submillimeter in translation and subdegree in rotation. For the phantom images, the registration results were compared with those provided by frame and marker-based manual registration. For the patient images, the results were compared with anatomical landmark-based manual registration to qualitatively determine how the results were close to a clinically acceptable registration. NMI and LC outperformed CC and BSMI, with the sense of being closer to a clinically acceptable result. As for the robustness, NMI and BSMI outperformed CC and LC. A guideline of image registration in our institution was given, and final visual assessment is necessary to guarantee reasonable results.

A dosimetric comparison of MammoSite and ClearPath high-dose-rate breast brachytherapy devices.

PURPOSE: A new form of partial breast irradiation (PBI), ClearPath (CP) breast brachytherapy, has been introduced. We present our results of a dosimetric comparison of MammoSite (MS) and CP PBI. METHODS AND MATERIALS: The dimensions of the CP device were reconstructed onto the MS planning CT scans for 15 previously treated patients. The mean %V(100), %V(150), %V(200) (percent of the PTV that received 100%, 150%, and 200% of the prescription dose, respectively), ipsilateral breast %V(50) (percent of the ipsilateral normal breast that received 50% of the prescription dose), ipsilateral lung %V(30) (percent of the ipsilateral lung that received 30% of the prescription dose), the heart %V(5) (percent of the heart that received 5% of the prescription dose), and the maximum skin point dose per fraction were then determined for each patient using the two methods of balloon-based PBI. RESULTS: The mean %V(100) was 96.5% vs. 96.5%, the mean %V(150) was 42.1% vs. 42.9% (p=ns), and the mean V(200) was 11.4% vs. 15.2% (p<.05) for the MS and CP methods, respectively. The mean ipsilateral breast %V(50) was 19.8% vs.18.0% (p<.05), the mean ipsilateral lung %V(30) was 3.7% vs. 2.8% (p<.05), the mean heart %V(5) was 57.0% vs. 54.3% (p<.05), and the maximum skin point dose per fraction was 312.2 and 273.6cGy (p<.05) for the MS and CP methods, respectively. CONCLUSIONS: The MS and CP methods of PBI offer comparable target volume coverage; however, the CP device achieves increased normal tissue sparing.

A dosimetric comparison of Xoft Axxent Electronic Brachytherapy and iridium-192 high-dose-rate brachytherapy in the treatment of endometrial cancer.

PURPOSE: This analysis was undertaken to dosimetrically compare iridium-192 high-dose-rate brachytherapy (IB) and Xoft Axxent Electronic Brachytherapy (XB; Xoft Inc., Sunnyvale, CA) in the treatment of endometrial cancer. METHODS AND MATERIALS: The planning CT scans from 11 patients previously treated with IB were used to construct hypothetical treatment plans using the source characteristics of the XB device. The mean V95, V100, and V150 (percent of the planning target volume that received 95%, 100%, and 150% of the prescription dose) were calculated. For both the bladder and rectum, the V35 (percent of the organ that received 35% of the prescription dose) and V50 (percent of the organ that received 50% of the prescription dose) were calculated for each patient using both methods of vaginal brachytherapy. RESULTS: The mean %V95 was 99.7% vs. 99.6% (p = ns) and the mean %V100 was 99.0% vs. 99.1% (p = ns) for the IB and XB methods, respectively. The mean %V150 was 35.8% vs. 58.9% (p < 0.05) for the IB and XB methods, respectively. The mean bladder %V35 was 47.7% vs. 27.4% (p < 0.05) and the mean bladder %V50 was 26.5% vs. 15.9% (p < 0.05) for the IB and XB methods, respectively. The mean rectal %V35 was 48.3% vs. 28.3% (p < 0.05) and the mean rectal %V50 was 27.8% vs. 17.0% (p < 0.05) for the IB and XB methods, respectively. CONCLUSIONS: The IB and XB methods of vaginal brachytherapy offer equivalent target volume coverage; however, the XB method allows increased sparing of the bladder and rectum.

A dosimetric comparison of three-dimensional conformal, intensity-modulated radiation therapy, and MammoSite partial-breast irradiation.

PURPOSE: Limited information is available comparing target volume and normal tissue dosimetry with the different techniques of partial breast irradiation (PBI). We present results of a dosimetric comparison of single catheter, balloon-based brachytherapy using the MammoSite catheter (BRT), 3D conformal radiation therapy (3DCRT), and intensity-modulated radiation therapy (IMRT). METHODS AND MATERIALS: Fifteen patients were treated using the BRT device. With the use of CT scans with balloons in inflated and deflated states, plans were developed for each patient using each of the methods of PBI, for a total of 45 plans. The plans were then compared using the below dosimetric parameters. RESULTS: The mean V100 was 95%, 92%, and 94% for the BRT, 3DCRT, and IMRT techniques, respectively. The mean ipsilateral breast V50 was 29%, 56%, and 46% (p < 0.0001) and the mean ipsilateral lung V30 was 5%, 7%, and 2% (p < 0.001 for IMRT vs. others) for the BRT, 3DCRT, and IMRT methods, respectively. For the 10 patients with left-sided breast tumors, the mean heart V5 was 12%, 4%, and 1% for the BRT, 3DCRT, and IMRT methods, respectively (p < 0.01). CONCLUSIONS: With increasing interest in PBI, our data may help clinicians individualize patient treatment decisions.

Performance of magnetic field-guided navigation system for interventional neurosurgical and cardiac procedures.

A hospital-based magnetic guidance system (MGS) was installed to assist a physician in navigating catheters and guide wires during interventional cardiac and neurosurgical procedures. The objective of this study is to examine the performance of this magnetic field-guided navigation system. Our results show that the system's radiological imaging components produce images with quality similar to that produced by other modern fluoroscopic devices. The system's magnetic navigation components also deflect the wire and catheter tips toward the intended direction. The physician, however, will have to oversteer the wire or catheter when defining the steering angle during the procedure. The MGS could be clinically useful in device navigation deflection and vessel access.

Limited accuracy of dose calculation for large fields at deep depths using the BrainSCAN v5.21 treatment planning system.

The Varian 120 multileaf collimator (MLC) has a leaf thickness of 5 mm projected at the isocenter plane and can deliver a radiation beam of large field size (up to 30 cm) to be used in intensity-modulated radiotherapy (IMRT). Often the dose must be delivered to depths greater than 20 cm. Therefore, during the commissioning of the BrainSCAN v5.21 or any radiation treatment-planning (RTP) systems, extensive testing of dose and monitor unit calculations must encompass the field sizes (1 cm to 30 cm) and the prescription depths (1 cm to 20 cm). Accordingly, the central-axis percent depth doses (PDDs) and off-axis percentage profiles must be measured at several depths for various field sizes. The data for this study were acquired with a 6-MV X-ray beam from a Varian 2100EX LINAC with a water phantom at a source-to-surface distance (SSD) of 100 cm. These measurements were also used to generate a photon beam module, based on a photon pencil beam dose-calculation algorithm with a fast-Fourier transform method. To commission the photon beam module used in our BrainSCAN RTP system, we performed a quantitative comparison of measured and calculated central-axis depth doses and off-axis profiles. Utilizing the principles of dose difference and distance-to-agreement introduced by Van Dyk et al. [Commissioning and quality assurance of treatment planning computers. Int J Radiat Oncol Biol Phys. 1993; 26:261-273], agreements between calculated and measured doses are <2% and <2 mm for the regions of low- and high-dose gradients, respectively. However, large errors (up to approximately 5% and approximately 7% for 20-cm and 30-cm fields, respectively, at the depth 20 cm) were observed for monitor unit calculations. For a given field size, the disagreement increased with the depth. Similarly, for a given depth the disagreement also increase with the field size. These large systematic errors were caused by using the tissue maximum ratio (TMR) in BrainSCAN v5.21 without considering increased field size as depth increased. These errors have been reported to BrainLAB.

A feasibility study of Dynamic Phantom scanner for quality assurance of photon beam profiles at various gantry angles.

The effect of gantry rotation on beam profiles of photon and electron beams is an important issue in quality assurance for radiotherapy. To address variations in the profiles of photon and electron beams at different gantry angles, a Dynamic Phantom scanner composed of a 20 x 12 x 6 cm3 scanning Lucite block was designed as a cross-beam-profile scanner. To our knowledge, differences between scanned profiles acquired at different gantry angles with a small size Lucite block and those acquired a full-size (60 x 60 x 50 cm3) water phantom have not been previously investigated. We therefore performed a feasibility study for a first prototype Dynamic Phantom scanner without a gantry attachment mount. Radiation beams from a Varian LINAC 21EX and 2100C were used. Photon beams (6 MV and 18 MV) were shaped by either collimator jaws or a Varian 120 Multileaf (MLC) collimator, and electron beams (6 MeV, 12 MeV, and 20 MeV) were shaped by a treatment cone. To investigate the effect on profiles by using a Lucite block, a quantitative comparison of scanned profiles with the Dynamic Phantom and a full-size water phantom was first performed at a 0 degrees gantry angle for both photon and electron beams. For photon beam profiles defined by jaws at 1.0 cm and 5.0 cm depths of Lucite (i.e., at 1.1 cm and 5.7 cm depth of water), a good agreement (less than 1% variation) inside the field edge was observed between profiles scanned with the Dynamic Phantom and with a water phantom. The use of Lucite in the Dynamic Phantom resulted in reduced penumbra width (about 0.5 mm out of 5 mm to 8mm) and reduced (1% to 2%) scatter dose beyond the field edges for both 6 MV and 18 MV beams, compared with the water phantom scanner. For profiles of the MLC-shaped 6 MV photon beam, a similar agreement was observed. For profiles of electron beams scanned at 2.9 cm depth of Lucite (i.e., at 3.3 cm depth of water), larger disagreements in profiles (3% to 4%) and penumbra width (3 mm to 4 mm out of 12 mm) were observed. Additional profiles with the gantry at 90 degrees and 270 degrees were performed for both MLC- and jaw-shaped photon beams and electron beams to evaluate the effect of gantry rotation. General good agreement is seen (less than 1 % variation) at all field sizes for collimator-shaped 6 MV and 18 MV photon beams. Similar variations observed for MLC-shaped photon beams indicate that the uncertainty in MLC position is similar to that for the collimator jaws. We conclude that the Dynamic Phantom scanner is a useful device for the routine quality assurance on beam profiles of photon beams and for constancy check on electron beams at various gantry angles. Caution should be taken when using this device to acquire basic electron dosimetry data.