Lab-made 3D printed electrochemical sensors coupled with chemometrics for Brazilian coffee authentication.

Analytical assurance of coffees' geographical indication (GI) authenticity is essential for producers and consumers. In this way, chemometric methods, electrochemical techniques, and 3D printed sensors become attractive to assure the coffee's quality. These sensors are low-cost, fast, and simple, with the possibility of miniaturization and portability. Therefore, 3D printed electrodes with chemometrics were used to classify-three Brazilian coffees from regions with GI. Further, Au/Gpt-PLA electrodes with partial least squares regression were used to detect the blending of GI coffee with traditional coffee. Soft independent modelling of class analogies coupled with cyclic voltammetry had the best performance, with 91-95% accuracy, specificity of 94-100%, and 80-83% sensitivity. Furthermore, the calibration models detected and quantified traditional coffee in all three coffees from regions with GI. The detection limits ranged from 1.4 to 10% (w/w), and quantification 4.6-32%, depending on the specific coffee.

Principles and applications of non-thermal technologies and alternative chemical compounds in meat and fish.

Conventional methods of food preservation have demonstrated several disadvantages and limitations in the efficiency of the microbial load reduction and maintain food quality. Hence, non-thermal preservation technologies (NTPT) and alternative chemical compounds (ACC) have been considered a high promissory replacer to decontamination, increasing the shelf life and promoting low levels of physicochemical, nutritional and sensorial alterations of meat and fish products. The combination of these methods can be a potential alternative to the food industry. This review deals with the most critical aspects of the mechanisms of action under microbial, physicochemical, nutritional and sensorial parameters and the efficiency of the different NTPT (ultrasound, high pressure processing, gamma irradiation and UV-C radiation) and ACC (peracetic acid, bacteriocins, nanoparticles and essential oils) applied in meat and fish products. The NTPT and ACC present a high capacity of microorganisms inactivation, ensuring low alterations level in the matrix and high reduction of environmental impact. However, the application conditions of the different methods as exposition time, energy intensity and concentration thresholds of chemical compounds need to be specifically established and continuously improved for each matrix type to reduce to the maximum the physicochemical, nutritional and sensorial changes. In addition, the combination of the methods (hurdle concept) may be an alternative to enhance the matrix decontamination. In this way, undesirable changes in meat and fish products can be further reduced without a decrease in the efficiency of the decontamination.

Effect of altitude and terrain aspect on the chemical composition of Coffea canephora cherries and sensory characteristics of the beverage.

BACKGROUND: The terrain slope and field altitude where the plant is cultivated influence the composition of coffee cherries. The aim of this study was to analyze the effects of different levels of altitude and terrain slope on the Coffea canephora cherries, as well as on the quality of the final beverage. C. canephora harvested in fields with 300 and 600 m altitude and with southeast- and northwest-facing slopes was evaluated. RESULTS: Lower pH values were observed for cherries cultivated at higher altitudes. The highest percentage of soluble solids (525.00 g kg-1 ) was found on northwest-facing slopes at 300 m. The highest values of phenolic compounds were observed at 600 m. Significant differences were found in the moisture of coffee cherries grown in different terrain slope and in the fiber content at different altitudes. The results do not enable us to conclude how the altitude and terrain slope influence the mineral content of cherries. Acidity, proteins, lipids, and carbohydrates were not influenced by altitude or terrain slope. The scores of cup quality were significantly affected by the altitude but not by the terrain slope. Coffees from cherries harvested in fields with 600 m altitude obtained the higher scores. CONCLUSION: Results show that altitude and terrain slope influence some compounds of coffee fruits, whereas others remain unaffected. The findings are important because, during coffee fruits processing, these compounds are used to produce others that will have an influence on the bean and coffee beverage quality. © 2020 Society of Chemical Industry.

Optimization of UV-C light and lactic acid combined treatment in decontamination of sliced Brazilian dry-cured loin: Salmonella Typhimurium inactivation and physicochemical quality.

This study aimed to test the effect of UV-C light (0.01-0.64 J/cm2) (UV) and lactic acid (0.1-12.9%) (LA) combined treatment on sliced Brazilian dry-cured loin (Socol, BDL) for (i) Salmonella Typhimurium reduction, (ii) physicochemical changes (color (a*, cured color, and ΔE), protein and lipid oxidation) and (iii) optimization using response surface methodology (RSM). Linear inactivation rate was achieved and UV was 2-fold more efficient than LA to inactivate S. Typhimurium. At the same time these combined technologies increased lipid (linear rate, R2adj = 0.88), protein oxidation (quadratic rate, R2adj = 0.86) and meat discoloration. Furthermore, the minimum point of the physicochemical changes was obtained using RSM, and the decontamination process was optimized. Hence, a reduction of 1.3 log cfu/g was achieved using 0.36 J/cm2 of UV and 7.7% of LA. These combined methods represent a promising industrial intervention strategy to dry-meat safety and quality.

Relationship between COVID-19 and weather: Case study in a tropical country.

This study aimed to evaluate the relationship between weather factors (temperature, humidity, solar radiation, wind speed, and rainfall) and COVID-19 infection in the State of Rio de Janeiro, Brazil. Solar radiation showed a strong (-0.609, p < 0.01) negative correlation with the incidence of novel coronavirus (SARS-CoV-2). Temperature (maximum and average) and wind speed showed negative correlation (p < 0.01). Therefore, in this studied tropical state, high solar radiation can be indicated as the main climatic factor that suppress the spread of COVID-19. High temperatures, and wind speed also are potential factors. Therefore, the findings of this study show the ability to improve the organizational system of strategies to combat the pandemic in the State of Rio de Janeiro, Brazil, and other tropical countries around the word.

A Chemometric Approach to Establish Underlying Connections between Lipid and Protein Oxidation and Instrumental Color and Texture Characteristics in Brazilian Dry-cured Loin.

This study aimed to use chemometrics to evaluate the influence of lipid and protein oxidation on the color and texture characteristics of Brazilian dry-cured loin (Socol, BDL). Upon exploration using hierarchical cluster analysis (HCA), two clusters were formed, indicating that higher water activity (aw) was associated with higher lipid and protein oxidation. However, this fact was associated with softening and low color quality (a*, chroma, and cured color). In a more in-depth exploration, using principal component analysis (PCA) for each cluster separately, connections between protein and lipid oxidation were found in high aw, as demonstrated by their statistical association. In the same way, relationships between high hardness and carbonyl contents were obtained only in high aw. In addition, an overall relationship (p < 0.05) between nondestructive measurements, such as hardness, and destructive methods (malonaldehyde and carbonyl contents) demonstrate that nondestructive techniques can be promising for further studies in the method replacement field. In this study, reasonable explanations of the connections between oxidative damage and quality traits in Socol are provided.

Modeling Salmonella Typhimurium Inactivation in Dry-Fermented Sausages: Previous Habituation in the Food Matrix Undermines UV-C Decontamination Efficacy.

The effects of previous Salmonella Typhimurium habituation to an Italian-style salami concerning pathogen resistance against ultraviolet-C light (UV-C) treatment were modeled in order to establish treatment feasibility for the decontamination of dry-fermented sausage. S. Typhimurium following 24 h habituation in fermented sausage (habituated cells) or non-habituation (non-habituated cells) were exposed to increasing UV-C radiation treatment times. The Weibull model was the best fit for describing S. Typhimurium UV-C inactivation. Heterogeneity in UV-C treatment susceptibilities within the S. Typhimurium population was observed, revealing intrinsic persistence in a sub-population. UV-C radiation up to 1.50 J/cm2 was a feasible treatment for dry-fermented sausage decontamination, as the matrices retained instrumental color and lipid oxidation physiochemical characteristics. However, habituation in the sausage matrix led to a 14-fold increase in the UV-C dose required to achieve the first logarithm reduction (δ value) in S. Typhimurium population. The results indicate that, although UV-C radiation might be considered an efficient method for dry-fermented sausage decontamination, effective doses should be reconsidered in order to reach desirable food safety parameters while preserving matrix quality.

Prior Exposure to Dry-Cured Meat Promotes Resistance to Simulated Gastric Fluid in Salmonella Typhimurium.

This study assessed if exposure of foodborne Salmonella enterica in Brazilian dry-cured loin (BDL) affects pathogen inactivation in simulated gastric fluid (SGF). The acid tolerance responses of three Salmonella enterica serovars, Typhimurium, Derby and Panama, were assessed by an acid challenge trial at pH 3.0 for 4 h following pre-adaptation to three conditions: neutral pH, acidic pH (4.5) or BDL matrix. The influence of Salmonella exposure temperature and time in the BDL on pathogen gastric fluid resistance was evaluated by the response surface methodology. The Salmonella serovars acquired acid tolerance when exposed to the BDL matrix and their response to acid stress was strain-dependent, with S. Typhimurium being the most tolerant strain. S. Typhimuirum exposed to temperatures >25 °C in the BDL matrix displayed increased resistance to SGF. By using the response surface methodology, it was determined that S. Typhimurium becomes less resistant against SGF if maintained in the BDL matrix at temperatures <7 °C, reinforcing the recommendation to store dry-cured meat under refrigeration in order to minimize consumer risks. The results presented herein point to a novel aspect of hurdle technology that should be taken into account to further understand the risks associated with hurdle-stable meat product, such as dry-cured meats, concerning foodborne pathogen contamination.

Modelling inactivation of Staphylococcus spp. on sliced Brazilian dry-cured loin with thermosonication and peracetic acid combined treatment.

Ultrasound (US) has a high capacity to increase food safety. Although high and/or moderate temperature in combination with US has been studied, the knowledge about cooling/low temperatures as well as its combined effect with chemical preservation methods is scarce. Therefore, the aim of this study was to describe the inactivation of Staphylococcus spp. (SA) present in the natural microbiota of sliced Brazilian dry-cured loin (Socol, BDL) using US (40 kHz and 5.40 W/g) at 1.6-17.9 kJ/g, temperature (T) between 6.4 and 73.6 °C and peracetic acid (PA) between 5.5 and 274.5 mg/L employing the Central Composite Rotatable Design. The model fully describes how the combination of US, T, and PA affects SA inactivation. In BDL, an increase in US acoustic energy density (kJ/g) allows the reduction of T necessary to inactivate SA because of the occurrence of synergistic effect. However, US applied at low T was inefficient. On the other hand, PA was more efficient at low T, since high T degraded this compound at different rates according to the holding T. Therefore, the data indicates a relation between the technologies used in the combined decontamination of sliced BDL improving dry-cured meat safety.

Stainless steel and polyethylene surfaces functionalized with silver nanoparticles.

The antimicrobial effects of a stainless steel surface and a polyethylene surface functionalized with silver nanoparticles on the adhesion of different bacteria and the changes in physical and chemical characteristics of these surfaces that influence biofilm formation were evaluated. The functionalized surfaces of polyethylene and stainless steel were more hydrophobic than the control ones. The bacterial surfaces were hydrophilic. The adhesion of all bacteria was thermodynamically favorable (ΔGadhesion<0) on all surfaces functionalized and control. The numbers of adhered cells of Staphylococcus aureus, Escherichia coli, and Pseudomonas fluorescens were not significantly different (p > 0.05) between the control and functionalized surfaces, reaching values compatible with biofilm formation. Analysis of atomic absorption spectrometry using water and reconstituted skim milk as simulants showed no release of Ag from the functionalized surfaces. In conclusion, the surfaces that were functionalized with silver nanoparticles were modified in hydrophobicity, roughness, and did not avoid bacterial adhesion. Additional studies of surfaces functionalized with silver nanoparticles should be conducted addressing the adsorption technique of silver nanoparticles on the stainless steel surface as well as in the preparation of the polyethylene surface to allow the contact of microorganism with the antimicrobial agent.

Antimicrobial effects of silver nanoparticles against bacterial cells adhered to stainless steel surfaces.

Given the increasing number of antibiotic-resistant bacteria and the need to synthesize new antimicrobials, silver has attracted interest in the scientific community because of its recognized antimicrobial activity. This study aimed to evaluate the antimicrobial effects of silver nanoparticles (NP) obtained by a new method and tested at concentrations of 6 µg/ml and 60 µg/ml against the species Staphylococcus aureus, Listeria innocua, Salmonella Choleraesuis, Pseudomonas aeruginosa, Escherichia coli, and Bacillus cereus. The ability of these nanoparticles to remove or kill vegetative cells adhered to stainless steel surfaces was also evaluated. We observed that the NP obtained with the new method, concentrated silver nanoparticles (CNP), and silver nanoparticles with added sodium chloride (NPNaCl) had high antimicrobial activities (P < 0.05). We also verified that the most effective condition for the removal of P. aeruginosa cells on stainless steel coupons (10 by 10 mm) was immersion of the surfaces in CNP. The CNP treatment produced a 5-log reduction of the microbial population after 30 to 60 min of immersion. The CNP treatment also performed better than water and sodium carbonate, a compound commonly applied in clean-in-place procedures in the food industry, in removing adherent B. cereus cells from stainless steel cylinders. Therefore, these results suggest that NP synthesized by a new procedure may be used as antimicrobials in the food industry, for example, for the sanitization of utensils that come into contact with foods.