ABSTRACT
State-of-the-art industrial electrocatalysts for the oxygen evolution reaction (OER) under acidic conditions are Ir-based. Considering the scarce supply of Ir, it is imperative to use the precious metal as efficiently as possible. In this work, we immobilized ultrasmall Ir and Ir0.4Ru0.6 nanoparticles on two different supports to maximize their dispersion. One high-surface-area carbon support serves as a reference but has limited technological relevance due to its lack of stability. The other support, antimony-doped tin oxide (ATO), has been proposed in the literature as a possible better support for OER catalysts. Temperature-dependent measurements performed in a recently developed gas diffusion electrode (GDE) setup reveal that surprisingly the catalysts immobilized on commercial ATO performed worse than their carbon-immobilized counterparts. The measurements suggest that the ATO support deteriorates particularly fast at elevated temperatures.
ABSTRACT
Hydrogen production from renewable resources and its reconversion into electricity are two important pillars toward a more sustainable energy use. The efficiency and viability of these technologies heavily rely on active and stable electrocatalysts. Basic research to develop superior electrocatalysts is commonly performed in conventional electrochemical setups such as a rotating disk electrode (RDE) configuration or H-type electrochemical cells. These experiments are easy to set up; however, there is a large gap to real electrochemical conversion devices such as fuel cells or electrolyzers. To close this gap, gas diffusion electrode (GDE) setups were recently presented as a straightforward technique for testing fuel cell catalysts under more realistic conditions. Here, we demonstrate for the first time a GDE setup for measuring the oxygen evolution reaction (OER) of catalysts for proton exchange membrane water electrolyzers (PEMWEs). Using a commercially available benchmark IrO2 catalyst deposited on a carbon gas diffusion layer (GDL), it is shown that key parameters such as the OER mass activity, the activation energy, and even reasonable estimates of the exchange current density can be extracted in a realistic range of catalyst loadings for PEMWEs. It is furthermore shown that the carbon-based GDL is not only suitable for activity determination but also short-term stability testing. Alternatively, the GDL can be replaced by Ti-based porous transport layers (PTLs) typically used in commercial PEMWEs. Here a simple preparation is shown involving the hot-pressing of a Nafion membrane onto a drop-cast glycerol-based ink on a Ti-PTL.
ABSTRACT
We present here the synthetic routes and the experimental data (NMR and MS spectra) for model reactions for copper-free Huisgen 1,4-cycloaddition, Staudinger ligation and for addition of a dithiol on a dibromomaleimide ring. Starting materials were synthesized from the commercially available 4-chlorophenethylamine, previously described 2-(cyclooct-2-yn-1-yloxy)acetic acid, 1-fluorocyclooct-2-ynecarboxylic acid, commercial 2-(diphenylphosphino)terephthalic acid 1-methyl 4-pentafluorophenyl diester and dibromomaleimide. In all cases, the expected compounds were obtained with good yield (50% to quantitative). A novel synthesis of the lipid anchor DOGP3NH2 is also described. These data were used as basis for the study reported in the article "Smart Tools and Orthogonal Click-like Reactions onto Small Unilamellar Vesicles" in Chemistry and Physics of Lipids [1].
ABSTRACT
Click-based reactions were conducted at the surface of small unilamellar vesicles (SUVs) to provide onto-vesicle chemistry with efficient innovative ready-for-use tools. For that purpose, four amphiphilic molecules were designed to insert into bilayers while presenting a reactive functional head. In this manner, a dioleylglycero-ethoxy-ethoxy-ethoxy-ethanamine (DOG-PEG4-NH2) was chosen as a common platform while the reactive amine head was converted into several electrophilic functions. Thus, two dioleylglycerol-based cyclooctyne anchors were prepared: cyclooct-1-yn-3-glycolic acid-based anchor (DOG-COA) and 1-fluorocyclooct-2-ynecarboxylic acid-based anchor (DOG-FCOA). The last one differed from the first one in that a fluorine atom reinforces the electrophilic properties of the unsaturated bond. In addition, a third dioleylglycerol-based triphenylphosphine (DOG-PPh3) was synthesized for the first time. These three innovative amphiphilic anchors were designed to react with any azide-based biomolecule following copper-free Huisgen 1,4-cycloaddition and Staudinger ligation, respectively. A fourth anchor bearing a 3,4-dibromomaleimide ring (DOG-DBM) was also unprecedentedly synthesized, to be further substituted by two thiols. Model reactions conducted in solution with either model biotinyl azide or model biotinyl disulfide gave good to total conversions and excellent isolated yields. The four new anchors were inserted into SUVs whose formula is classically used in in vivo biology. Stability and surface overall electrostatic charge were in the expected range and constant over the study. Then, the functionalized liposomes were ligated to biotin-based reagents and the experimental conditions were finely tuned to optimize the conversion. The biotinyl liposomes were demonstrated functional and totally accessible in an affinity test based on biotin scaffold quantification. Finally, DOG-FCOA's reactivity was confronted to that of DOG-DBM in a 'one-pot' orthogonal reaction. (Biotin-S)2 and TAMRA-N3 (tetramethylcarboxyrhodamine azide) were successively conjugated to the liposome suspension in a successful manner. These data implement and reinforce the interest of bioorthogonal click-like reactions onto lipid nanoparticles.
