N-Terminal Fragment of Cardiac Myosin Binding Protein-C Increases the Duration of Actin-Myosin Interaction.

Cardiac myosin binding protein-C (cMyBP-C) located in the C-zone of myocyte sarcomere is involved in the regulation of myocardial contraction. Its N-terminal domains C0, C1, C2, and the m-motif between C1 and C2 can bind to the myosin head and actin of the thin filament and affect the characteristics of their interaction. Measurements using an optical trap showed that the C0-C2 fragment of cMyBP-C increases the interaction time of cardiac myosin with the actin filament, while in an in vitro motility assay, it dose-dependently reduces the sliding velocity of actin filaments. Thus, it was found that the N-terminal part of cMyBP-C affects the kinetics of the myosin cross-bridge.

Comparison of Functional Characteristics of Myosin in Fast and Slow Skeletal Muscles.

Myosins of fast and slow skeletal muscles differ by the isoform composition of the heavy and light chains. We compared functional characteristics of myosin from the fast (m. psoas) and slow (m. soleus) muscles of rabbits. The parameters of single actin-myosin interaction were measured in an optical trap, and the characteristics of the Ca2+ regulation of actin-myosin interaction were studied using an in vitro motility assay. The duration of interaction of myosin from the fast muscle with actin was shorter and the filament sliding velocity over this myosin was higher than the corresponding parameters for myosin from the slow muscle. The dependence pCa-velocity for myosin from the fast muscle was less sensitive to Ca2+ than that of slow muscle myosin. Thus, functional properties of myosin determine not only mechanical and kinetic characteristics of muscle contraction, but also the peculiarities of its Ca2+ regulation.

Effect of Interchain Disulfide Crosslinking in the Tropomyosin Molecule on Actin-Myosin Interaction in the Atrial Myocardium.

Tropomyosin (Tpm) is one of the main regulatory proteins in the myocardium. In some heart pathologies, interchain disulfide crosslinking in the Tpm molecule occurs. In the ventricle, this change in the structural properties of the Tpm molecule affects calcium regulation of the actin-myosin interaction. Using an in vitro motility assay, we found that Tpm crosslinking does not affect the actin-myosin interaction in the atria. We assume that the intramolecular crosslinking of Tpm in the atrium does not play such a crucial role in the pathogenesis of heart failure as it plays in the heart ventricles.

The Effect of Experimental Hyperthyroidism on Characteristics of Actin-Myosin Interaction in Fast and Slow Skeletal Muscles.

The molecular mechanism of the failure of contractile function of skeletal muscles caused by oxidative damage to myosin in hyperthyroidism is not fully understood. Using an in vitro motility assay, we studied the effect of myosin damage caused by oxidative stress in experimental hyperthyroidism on the actin-myosin interaction and its regulation by calcium. We found that hyperthyroidism-induced oxidation of myosin is accompanied by a decrease in the sliding velocity of the regulated thin filaments in the in vitro motility assay, and this effect is increased with the duration of the pathological process.

Carbonylation of atrial myosin prolongs its interaction with actin.

Carbonylation induced by hyperthyroidism suppresses force generation of skeletal myosin and sliding velocity of actin filaments in an in vitro motility assay. However, its effects on cardiac myosin at the molecular level have not been studied. Hyperthyroidism induces a change in expression of myosin heavy chains in ventricles, which may mask the effect of oxidation. In contrast to ventricular myosin, expression of myosin heavy chains in the atrium does not change upon hyperthyroidism and enables investigation of the effect of oxidation on cardiac myosin. We studied the influence of carbonylation, a type of protein oxidation, on the motor function of atrial myosin and Ca2+ regulation of actin-myosin interaction at the level of isolated proteins and single molecules using an in vitro motility assay and an optical trap. Carbonylation of atrial myosin prolonged its attached state on actin and decreased maximal sliding velocity of thin filaments over this myosin but did not affect the calcium sensitivity of the velocity. The results indicate that carbonylation of atrial myosin induced by hyperthyroidism can be a rate-limiting factor of atrium contractility and so participates in the genesis of heart failure in hyperthyroidism.

Possible Cause of Nonlinear Tension Rise in Activated Muscle Fiber during Stretching.

Tension in contracting muscle fiber under conditions of ramp stretching rapidly increases, but after reaching a critical stretch Pc sharply decreases. To find out the cause of these changes in muscle fiber tension, we stopped stretching before and after reaching Pc and left the fiber stretched for 50 msec. After rapid tension drop, the transient tension rise not accompanied by fiber stiffness increase was observed only in fibers heated to 25°C and stretched to Pc. Under other experimental conditions, this growth was absent. We suppose that stretch of the fiber to Pc induces transition of stereo-specifically attached myosin heads to pre-power stroke state and when the stretching is stopped, they make their step on actin and generate force. When the tension reaches Pc, all stereospecifically attached myosin heads turn out to be non-stereospecifically, or weakly attached to actin, and are unable to make the force-generating step.

The properties of the actin-myosin interaction in the heart muscle depend on the isoforms of myosin but not of α-actin.

In myocardium of mammals there are two isoforms of myosin heavy chains, α and ß. In ventricle, together with ventricular isoforms of light chains they form two isomyosins: V1 and V3, homodimers of α- and ß-heavy chains, respectively. In atria, α- and ß-heavy chains together with atrial light chains form A1 (αα) and A2 (ßß) isomyosins. Besides in myocardium two isoforms of α-actin, skeletal and cardiac, are expressed. We assume that the differences in the amino acid sequence of cardiac and skeletal actin may affect its interaction with myosin. To test this hypothesis, we investigated characteristics of actin-myosin interactions of cardiac and skeletal isoforms of α-actin with the isoforms of cardiac myosin using an optical trap technique and an in vitro motility assay. It was found that the mechanical and kinetic characteristics of the interactions of the isoforms of cardiac myosin with actin depend on the isoforms of myosin not α-actin.

Investigations of Molecular Mechanisms of Actin-Myosin Interactions in Cardiac Muscle.

The functional characteristics of cardiac muscle depend on the composition of protein isoforms in the cardiomyocyte contractile machinery. In the ventricular myocardium of mammals, several isoforms of contractile and regulatory proteins are expressed - two isoforms of myosin (V1 and V3) and three isoforms of tropomyosin chains (α, ß, and κ). Expression of protein isoforms depends on the animal species, its age and hormonal status, and this can change with pathologies of the myocardium. Mutations in these proteins can lead to cardiomyopathies. The functional significance of the protein isoform composition has been studied mainly on intact hearts or on isolated preparations of myocardium, which could not provide a clear comprehension of the role of each particular isoform. Present-day experimental techniques such as an optical trap and in vitro motility assay make it possible to investigate the phenomena of interactions of contractile and regulatory proteins on the molecular level, thus avoiding effects associated with properties of a whole muscle or muscle tissue. These methods enable free combining of the isoforms to test the molecular mechanisms of their participation in the actin-myosin interaction. Using the optical trap and the in vitro motility assay, we have studied functional characteristics of the cardiac myosin isoforms, molecular mechanisms of the calcium-dependent regulation of actin-myosin interaction, and the role of myosin and tropomyosin isoforms in the cooperativity mechanisms in myocardium. The knowledge of molecular mechanisms underlying myocardial contractility and its regulation is necessary for comprehension of cardiac muscle functioning, its disorders in pathologies, and for development of approaches for their correction.

Stabilization of the Central Part of Tropomyosin Molecule Alters the Ca2+-sensitivity of Actin-Myosin Interaction.

We show that the mutations D137L and G126R, which stabilize the central part of the tropomyosin (Tm) molecule, increase both the maximal sliding velocity of the regulated actin filaments in the in vitro motility assay at high Са(2+) concentrations and the Са(2+)-sensitivity of the actin-myosin interaction underlying this sliding. Based on an analysis of the recently published data on the structure of the actin-Tm-myosin complex, we suppose that the physiological effects of these mutations in Tm can be accounted for by their influence on the interactions between the central part of Tm and certain sites of the myosin head.

Effects of cardiac myosin binding protein-C on the regulation of interaction of cardiac myosin with thin filament in an in vitro motility assay.

Modulatory role of whole cardiac myosin binding protein-C (сMyBP-C) in regulation of cardiac muscle contractility was studied in the in vitro motility assay with rabbit cardiac myosin as a motor protein. The effects of cMyBP-C on the interaction of cardiac myosin with regulated thin filament were tested in both in vitro motility and ATPase assays. We demonstrate that the addition of cMyBP-C increases calcium regulated Mg-ATPase activity of cardiac myosin at submaximal calcium. The Hill coefficient for 'pCa-velocity' relation in the in vitro motility assay decreased and the calcium sensitivity increased when сMyBP-C was added. Results of our experiments testifies in favor of the hypothesis that сMyBP-C slows down cross-bridge kinetics when binding to actin.

Rapid cryofixation of rabbit muscle fibres after a temperature jump.

We describe a procedure whereby structural changes that occur in muscle fibres after a rapid temperature jump can be captured by cryofixation. In the thick filament from rabbit and other mammalian skeletal muscles there is a rapid transition from a non-helical to a helical structure as the temperature is raised from 273 K towards physiological levels. This transition is accompanied by characteristic intensity changes in the X-ray diffraction pattern of the muscle. In our experiments to capture these changes, single fibres of glycerinated psoas muscle were subjected to a Joule temperature jump of 15-30 K from approximately 278 K in air. We have developed a freezing method using a modified Gatan cryosnapper in which a pair of liquid nitrogen-cooled copper jaws were projected under pressure and closed on the fibre between 50 and 100 ms after the temperature jump. The frozen fibres were freeze-substituted and embedded for electron microscopy. Transverse and longitudinal sections of relaxed 'cold' (approximately 278 K) and temperature-jumped fibres as well as rigor fibres were obtained. Fourier transforms of the images from the three preparations showed differences in the relative intensities of the reflections from the hexagonal filament lattice and in those of the helix-based layer lines, similar to the differences seen by X-ray diffraction. We conclude that we have preserved the 'hot' structure and that cryofixation is sufficiently fast to prevent the transition back to the 'cold' state.

Structural responses to the photolytic release of ATP in frog muscle fibres, observed by time-resolved X-ray diffraction.

1. Structural changes following the photolytic release of ATP were observed in single, permeabilised fibres of frog skeletal muscle at 5-6 C, using time-resolved, low-angle X-ray diffraction. The structural order in the fibres and their isometric function were preserved by cross-linking 10-20 % of the myosin cross-bridges to the thin filaments. 2. The time courses of the change in force, stiffness and in intensity of the main equatorial reflections (1,0) and (1,1), of the third myosin layer line (M3) at a reciprocal spacing of (14.5 nm)-1 on the meridian and of the first myosin-actin layer line (LL1) were measured with 1 ms time resolution. 3. In the absence of Ca2+, photolytic release of ATP in muscle fibres initially in the rigor state caused the force and stiffness to decrease monotonically towards their values in relaxed muscle fibres. 4. In the presence of Ca2+, photolytic release of ATP resulted in an initial rapid decrease in force, followed by a slower increase to the isometric plateau. Muscle fibre stiffness decreased rapidly to approximately 65 % of its value in rigor. 5. In the absence of Ca2+, changes on the equator, in LL1 and in M3 occurred with a time scale comparable to that of the changes in tension and stiffness. 6. In the presence of Ca2+, the changes on the equator and LL1 occurred simultaneously with the early phase of tension decrease. The changes in the intensity of M3 (IM3) occurred on the time scale of the subsequent increase in force. The time courses of the changes in tension and IM3 were similar following the photolytic release of 0. 33 or 1.1 mM ATP. However the gradual return towards the rigor state began earlier when only 0.33 mM ATP was released. 7. In the presence of Ca2+, the time course of changes in IM3 closely mimicked that of force development following photolytic release of ATP. This is consistent with models that propose that force development results from a change in the average orientation of cross-bridges, although other factors, such as their redistribution, may also be involved.

Structural changes in the actin-myosin cross-bridges associated with force generation induced by temperature jump in permeabilized frog muscle fibers.

Structural changes induced by Joule temperature jumps (T-jumps) in frog muscle fibers were monitored using time-resolved x-ray diffraction. Experiments made use of single, permeabilized fibers that were fully activated after slight cross-linking with 1-ethyl-3-[3-dimethylamino)propyl]carbodiimide to preserve their structural order. After T-jumps from 5-6 to approximately 17 degrees C and then on to approximately 30 degrees C, tension increased by a factor of 1.51 and 1.84, respectively, whereas fiber stiffness did not change with temperature. The tension rise was accompanied by a decrease in the intensity of the (1, 0) equatorial x-ray reflection by 15 and 26% (at approximately 17 and approximately 30 degrees C) and by an increase in the intensity of the M3 myosin reflection by 20% and 41%, respectively. The intensity of the (1,1) equatorial reflection increased slightly. The peak of the intensity on the 6th actin layer line shifted toward the meridian with temperature. The intensity of the 1st actin layer line increased from 12% (of its rigor value) at 5-6 degrees C to 36% at approximately 30 degrees C, so that the fraction of the cross-bridges labeling the actin helix estimated from this intensity increased proportionally to tension from approximately 35% at 5-6 degrees C to approximately 60% at approximately 30 degrees C. This suggests that force is generated during a transition of nonstereo-specifically attached myosin cross-bridges to a stereo-specific binding state.

Muscle force is generated by myosin heads stereospecifically attached to actin.

Muscle force is generated by myosin crossbridges interacting with actin. As estimated from stiffness and equatorial X-ray diffraction of muscle and muscle fibres, most myosin crossbridges are attached to actin during isometric contraction, but a much smaller fraction is bound stereospecifically. To determine the fraction of crossbridges contributing to tension and the structural changes that attached crossbridges undergo when generating force, we monitored the X-ray diffraction pattern during temperature-induced tension rise in fully activated permeabilized frog muscle fibres. Temperature jumps from 5-6 degrees C to 16-19 degrees C initiated a 1.7-fold increase in tension without significantly changing fibre stiffness or the intensities of the (1,1) equatorial and (14.5 nm)(-1) meridional X-ray reflections. However, tension rise was accompanied by a 20% decrease in the intensity of the (1,0) equatorial reflection and an increase in the intensity of the first actin layer line by approximately 13% of that in rigor. Our results show that muscle force is associated with a transition of the crossbridges from a state in which they are nonspecifically attached to actin to one in which stereospecifically bound myosin crossbridges label the actin helix.

Mechanical and structural properties underlying contraction of skeletal muscle fibers after partial 1-ethyl-3-[3-dimethylamino)propyl]carbodiimide cross-linking.

We show prolonged contraction of permeabilized muscle fibers of the frog during which structural order, as judged from low-angle x-ray diffraction, was preserved by means of partial cross-linking of the fibers using the zero-length cross-linker 1-ethyl-3-[3-dimethylamino)propyl]carbodiimide. Ten to twenty percent of the myosin cross-bridges were cross-linked, allowing the remaining 80-90% to cycle and generate force. These fibers displayed a well-preserved sarcomeric order and mechanical characteristics similar to those of intact muscle fibers. The intensity of the brightest meridional reflection at 14.5 nm, resulting from the projection of cross-bridges evenly spaced along the myofilament length, decreased by 60% as a relaxed fiber was deprived of ATP and entered the rigor state. Upon activation of a rigorized fiber by the addition of ATP, the intensity of this reflection returned to 97% of the relaxed value, suggesting that the overall orientation of cross-bridges in the active muscle was more perpendicular to the filament axis than in rigor. Following a small-amplitude length step applied to the active fibers, the reflection intensity decreased for both releases and stretches. In rigor, however, a small stretch increased the amplitude of the reflection by 35%. These findings show the close link between cross-bridge orientation and tension changes.

Force generation and work production by covalently cross-linked actin-myosin cross-bridges in rabbit muscle fibers.

To separate a fraction of the myosin cross-bridges that are attached to the thin filaments and that participate in the mechanical responses, muscle fibers were cross-linked with 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide and then immersed in high-salt relaxing solution (HSRS) of 0.6 M ionic strength for detaching the unlinked myosin heads. The mechanical properties and force-generating ability of the cross-linked cross-bridges were tested with step length changes (L-steps) and temperature jumps (T-jumps) from 6-10 degrees C to 30-40 degrees C. After partial cross-linking, when instantaneous stiffness in HSRS was 25-40% of that in rigor, the mechanical behavior of the fibers was similar to that during active contraction. The kinetics of the T-jump-induced tension transients as well as the rate of the fast phase of tension recovery after length steps were close to those in unlinked fibers during activation. Under feedback force control, the T-jump initiated fiber shortening by up to 4 nm/half-sarcomere. Work produced by a cross-linked myosin head after the T-jump was up to 30 x 10(-21) J. When the extent of cross-linking was increased and fiber stiffness in HSRS approached that in rigor, the fibers lost their viscoelastic properties and ability to generate force with a rise in temperature.

Tension responses to joule temperature jump in skinned rabbit muscle fibres.

1. Joule temperature jumps (T-jumps) from 5-9 degrees C up to 40 degrees C were used to study the cross-bridge kinetics and thermodynamics in skinned rabbit muscle fibres. To produce a T-jump, an alternating current pulse was passed through a fibre 5 s after removing the activating solution (pCa congruent to 4.5) from the experimental trough. The pulse frequency was congruent to 30 kHz, amplitude less than or equal to 3 kV, and duration 0.2 ms. The pulse energy liberated in the fibre was calculated using a special analog circuit and then used for estimation of the T-jump amplitude. 2. The T-jump induced a tri-exponential tension transient. Phases 1 and 2 had rate constants k1 = 450-1750 s-1 and k2 = 60-250 s-1 respectively, characterizing the tension rise, whereas phase 3 had a rate constant k3 = 5-10 s-1 representing tension recovery due to the fibre cooling. 3. An increase from 13 to 40 degrees C for the final temperature achieved by the T-jump led to an increase in the amplitudes of phases 1 and 2. After T-jumps to 30-40 degrees C during phase 1, tension increased by 50-80%. During phase 2 an approximately 2-fold tension increase continued. Rate constants k1 and k2 increased with temperature and temperature coefficients (Q10) were 1.6 and 1.7, respectively. 4. To study which processes in the cross-bridges are involved in phases 1 and 2, a series of experiments were made where step length changes of -9 to +3 nm (hs)-1 (nanometres per half-sarcomere length) were applied to the fibre 4 ms before the T-jump. 5. After the step shortening, the rate constant of phase 1 increased, whereas its amplitude decreased compared to those without a length change. This indicates that phase 1 is determined by some force-generating process in the cross-bridges attached to the thin filaments. This process is, most probably, the same as that producing the early tension recovery following the length change. The enthalpy change (delta H) associated with the reaction controlling this process was estimated to be positive (15-30 kJ mol-1). 6. Both the rate constant k2 and the maximal tension achieved at the end of phase 2 were practically independent of the preceding length changes. This means that phase 2 is accompanied by the cross-bridge detachment and reattachment to new sites on the thin filaments.(ABSTRACT TRUNCATED AT 400 WORDS)