Spotlight on the Life Cycle of Acrylamide-Based Polymers Supporting Reductions in Environmental Footprint: Review and Recent Advances.

Humankind is facing a climate and energy crisis which demands global and prompt actions to minimize the negative impacts on the environment and on the lives of millions of people. Among all the disciplines which have an important role to play, chemistry has a chance to rethink the way molecules are made and find innovations to decrease the overall anthropic footprint on the environment. In this paper, we will provide a review of the existing knowledge but also recent advances on the manufacturing and end uses of acrylamide-based polymers following the "green chemistry" concept and 100 years after the revolutionary publication of Staudinger on macromolecules. After a review of raw material sourcing options (fossil derivatives vs. biobased), we will discuss the improvements in monomer manufacturing followed by a second part dealing with polymer manufacturing processes and the paths followed to reduce energy consumption and CO2 emissions. In the following section, we will see how the polyacrylamides help reduce the environmental footprint of end users in various fields such as agriculture or wastewater treatment and discuss in more detail the fate of these molecules in the environment by looking at the existing literature, the regulations in place and the procedures used to assess the overall biodegradability. In the last section, we will review macromolecular engineering principles which could help enhance the degradability of said polymers when they reach the end of their life cycle.

A Structural Approach to Establishing a Platform Chemistry for the Tunable, Bulk Electron Beam Cross-Linking of Shape Memory Polymer Systems.

The synthetic design and thermomechanical characterization of shape memory polymers (SMPs) built from a new polyurethane chemistry that enables facile, bulk and tunable cross-linking of low-molecular weight thermoplastics by electron beam irradiation is reported in this study. SMPs exhibit stimuli-induced geometry changes and are being proposed for applications in numerous fields. We have previously reported a polyurethane SMP system that exhibits the complex processing capabilities of thermoplastic polymers and the mechanical robustness and tunability of thermomechanical properties that are often characteristic of thermoset materials. These previously reported polyurethanes suffer practically because the thermoplastic molecular weights needed to achieve target cross-link densities severely limit high-throughput thermoplastic processing and because thermally unstable radiation-sensitizing additives must be used to achieve high enough cross-link densities to enable desired tunable shape memory behavior. In this study, we demonstrate the ability to manipulate cross-link density in low-molecular weight aliphatic thermoplastic polyurethane SMPs (Mw as low as ~1.5 kDa) without radiation-sensitizing additives by incorporating specific structural motifs into the thermoplastic polymer side chains that we hypothesized would significantly enhance susceptibility to e-beam cross-linking. A custom diol monomer was first synthesized and then implemented in the synthesis of neat thermoplastic polyurethane SMPs that were irradiated at doses ranging from 1 to 500 kGy. Dynamic mechanical analysis (DMA) demonstrated rubbery moduli to be tailorable between 0.1 and 55 MPa, and both DMA and sol/gel analysis results provided fundamental insight into our hypothesized mechanism of electron beam cross-linking, which enables controllable bulk cross-linking to be achieved in highly processable, low-molecular weight thermoplastic shape memory polymers without sensitizing additives.

Polycarbonates from the polyhydroxy natural product quinic acid.

Strategies for the preparation of polycarbonates, derived from natural polyhydroxy monomeric repeat units, were developed for biosourced polycarbonates based on quinic acid. The design and synthesis of regioselectively tert-butyldimethylsilyloxy (TBS)-protected 1,4- and 1,5-diol monomers of quinic acid were followed by optimization of their copolymerizations with phosgene, generated in situ from trichloromethyl chloroformate, to yield protected poly(1,4-quinic acid carbonate) and poly(1,5-quinic acid carbonate). The molecular weights reached ca. 7.6 kDa, corresponding to degrees of polymerization of ca. 24, with polydispersities ranging from 2.0 to 3.5, as measured by SEC using tetrahydrofuran as the eluent and with polystyrene calibration standards. Partially because of the presence of the bicyclic backbone, each regioisomeric poly(quinic acid carbonate) exhibited relatively high glass-transition temperatures, 209 °C for poly(1,4-quinic acid carbonate) and 229 °C for poly(1,5-quinic acid carbonate). Removal of the TBS-protecting groups was studied under mild conditions to achieve control over potential competing reactions involving polymer degradation, which could include cleavage of lactones within the repeat units, carbonate linkages, or both between the repeat units. Full deprotection was not achieved without some degree of polymer degradation. The regiochemistry of the monomer showed significant impact on the reactivity during deprotection and also on the thermal properties, with the 1,5-regioisomeric polymer having lower reactivity and giving higher T(g) values, in comparison with the 1,4-regioisomer. Each regioisomer underwent a 10-20 °C increase in T(g) upon partial removal of the TBS-protecting groups. As the extent of deprotection increased, the solubility decreased. Ultimately, at long deprotection reaction times, the solubility increased and the T(g) decreased because of significant degradation of the polymers.

Structure-properties relationship of biosourced stereocontrolled polytriazoles from click chemistry step growth polymerization of diazide and dialkyne dianhydrohexitols.

The design of dialkyne and diazide functionalized dianhydrohexitol stereoisomers (1-6) afforded a new family of starch-based polytriazoles (7-15) with defined stereochemistry through A(2) + B(2) CuAAC step growth polymerization. The present strategy gave rise to polytriazoles having a high biosourced weight fraction (superior to 60% wt) and exhibiting relatively high molar masses (M(n) = 8-17 kg/mol) that could be easily dissolved in DMF or DMSO. The obtained materials were amorphous and displayed high transition temperatures (T(g) = 125-166 °C) as well as good resistance to thermal degradation (T(d10) = 325-347 °C). Monomer stereochemistry proved to be a crucial parameter aiming at generating polymers with high T(g). Thus, optimal thermal properties were obtained with monomers having RR absolute configuration of the C-2 and C-5 carbon atoms (isomannide configuration).

Recent progress in the synthesis of carbohydrate-based amphiphilic materials: the examples of sucrose and isomaltulose.

In the context of the use of carbohydrates obtained from agricultural crops, the search for amphiphilic derivatives is one of the most developed aspects. Indeed, due to the high polarity and the functional richness of sugars, many different structures can be targeted, with a wide range of physicochemical properties, either for large scale products of industrial interest, or for fine applications at the chemistry-biology interface. Among carbohydrates arising from agricultural resources, sucrose is especially interesting because of its very large production scale in the world (ca. 160Mt/year, ca. 20Mt/year of which in the European Community). Here, we describe the research accomplished in our group dealing with the synthesis and the study of the properties of amphiphilic derivatives prepared from sucrose as well as from another very available disaccharide, isomaltulose.

Reactivity of melezitose and raffinose under Mitsunobu reaction conditions.

The reactivity of melezitose and raffinose under Mitsunobu conditions was studied within the scope of the use of trisaccharides for the synthesis of fatty acid esters. Melezitose led to esters with preferential substitution at primary positions following the order of reactivity 6''>6>6'. Raffinose proved to be very reluctant toward ester formation in these conditions, leading mainly to the new 3'',6''-anhydroraffinose.