Photocatalytic CO2 Reduction Using Homogeneous Carbon Dots with a Molecular Cobalt Catalyst.

A simple and precious-metal free photosystem for the reduction of aqueous CO2 to syngas (CO and H2) is reported consisting of carbon dots (CDs) as the sole light harvester together with a molecular cobalt bis(terpyridine) CO2 reduction co-catalyst. This homogeneous photocatalytic system operates in the presence of a sacrificial electron donor (triethanolamine) in DMSO/H2O solution at ambient temperature. The photocatalytic system exhibits an activity of 7.7 ± 0.2 mmolsyngas gCDs -1 (3.6 ± 0.2 mmolCO gCDs -1 and 4.1 ± 0.1 mmolH2 gCDs -1) after 24 hours of full solar spectrum irradiation (AM 1.5G). Spectroscopic and electrochemical characterization supports that this photocatalytic performance is attributed to a favorable association between CDs and the molecular cobalt catalyst, which results in improved interfacial photoelectron transfer and catalytic mechanism. This work provides a scalable and inexpensive platform for the development of CO2 photoreduction systems using CDs.

Solar reforming as an emerging technology for circular chemical industries.

The adverse environmental impacts of greenhouse gas emissions and persistent waste accumulation are driving the demand for sustainable approaches to clean-energy production and waste recycling. By coupling the thermodynamically favourable oxidation of waste-derived organic carbon streams with fuel-forming reduction reactions suitable for producing clean hydrogen or converting CO2 to fuels, solar reforming simultaneously valorizes waste and generates useful chemical products. With appropriate light harvesting, catalyst design, device configurations and waste pre-treatment strategies, a range of sustainable fuels and value-added chemicals can already be selectively produced from diverse waste feedstocks, including biomass and plastics, demonstrating the potential of solar-powered upcycling plants. This Review highlights solar reforming as an emerging technology that is currently transitioning from fundamental research towards practical application. We investigate the chemistry and compatibility of waste pre-treatment, introduce process classifications, explore the mechanisms of different solar reforming technologies, and suggest appropriate concepts, metrics and pathways for various deployment scenarios in a net-zero-carbon future.

Valorisation of lignocellulose and low concentration CO2 using a fractionation-photocatalysis-electrolysis process.

The simultaneous upcycling of all components in lignocellulosic biomass and the greenhouse gas CO2 presents an attractive opportunity to synthesise sustainable and valuable chemicals. However, this approach is challenging to realise due to the difficulty of implementing a solution process to convert a robust and complex solid (lignocellulose) together with a barely soluble and stable gas (CO2). Herein, we present the complete oxidative valorisation of lignocellulose coupled to the reduction of low concentration CO2 through a three-stage fractionation-photocatalysis-electrolysis process. Lignocellulose from white birch wood was first pre-treated using an acidic solution to generate predominantly cellulosic- and lignin-based fractions. The solid cellulosic-based fraction was solubilised using cellulase (a cellulose depolymerising enzyme), followed by photocatalytic oxidation to formate with concomitant reduction of CO2 to syngas (a gas mixture of CO and H2) using a phosphonate-containing cobalt(ii) bis(terpyridine) catalyst immobilised onto TiO2 nanoparticles. Photocatalysis generated 27.9 ± 2.0 µmolCO gTiO2-1 (TONCO = 2.8 ± 0.2; 16% CO selectivity) and 147.7 ± 12.0 µmolformate gTiO2-1 after 24 h solar light irradiation under 20 vol% CO2 in N2. The soluble lignin-based fraction was oxidised in an electrolyser to the value-added chemicals vanillin (0.62 g kglignin-1) and syringaldehyde (1.65 g kglignin-1) at the anode, while diluted CO2 (20 vol%) was converted to CO (20.5 ± 0.2 µmolCO cm-2 in 4 h) at a Co(ii) porphyrin catalyst modified cathode (TONCO = 707 ± 7; 78% CO selectivity) at an applied voltage of -3 V. We thus demonstrate the complete valorisation of solid and a gaseous waste stream in a liquid phase process by combining fractioning, photo- and electrocatalysis using molecular hybrid nanomaterials assembled from earth abundant elements.

Chemoenzymatic Photoreforming: A Sustainable Approach for Solar Fuel Generation from Plastic Feedstocks.

Plastic upcycling through catalytic transformations is an attractive concept to valorize waste, but the clean and energy-efficient production of high-value products from plastics remains challenging. Here, we introduce chemoenzymatic photoreforming as a process coupling enzymatic pretreatment and solar-driven reforming of polyester plastics under mild temperatures and pH to produce clean H2 and value-added chemicals. Chemoenzymatic photoreforming demonstrates versatility in upcycling polyester films and nanoplastics to produce H2 at high yields reaching ∼103-104 µmol gsub-1 and activities at >500 µmol gcat-1 h-1. Enzyme-treated plastics were also used as electron donors for photocatalytic CO2-to-syngas conversion with a phosphonated cobalt bis(terpyridine) catalyst immobilized on TiO2 nanoparticles (TiO2|CotpyP). Finally, techno-economic analyses reveal that the chemoenzymatic photoreforming approach has the potential to drastically reduce H2 production costs to levels comparable to market prices of H2 produced from fossil fuels while maintaining low CO2-equivalent emissions.

Solar Panel Technologies for Light-to-Chemical Conversion.

The sustainable synthesis of fuels and chemicals is key to attaining a carbon-neutral economy. This can be achieved by mimicking the light-harvesting and catalytic processes occurring in plants. Solar fuel production is commonly performed via established approaches, including photovoltaic-electrochemical (PV-EC), photoelectrochemical (PEC), and photocatalytic (PC) systems. A recent shift saw these systems evolve into integrated, compact panels, which suit practical applications through their simplicity, scalability, and ease of operation. This advance has resulted in a suite of apparently similar technologies, including the so-called artificial leaves and PC sheets. In this Account, we compare these different thin film technologies based on their micro- and nanostructure (i.e., layered vs particulate), operation principle (products occurring on the same or different sides of the panel), and product/reaction scope (overall water splitting and CO2 reduction, or organics, biomass, and waste conversion).For this purpose, we give an overview of developments established over the past few years in our laboratory. Two light absorbers are generally required to overcome the thermodynamic challenges of coupling water oxidation to proton or CO2 reduction with good efficiency. Hence, tandem artificial leaves combine a lead halide perovskite photocathode with a BiVO4 photoanode to generate syngas (a mixture of H2 and CO), whereas PC sheets involve metal-ion-doped SrTiO3 and BiVO4 particles for selective formate synthesis from CO2 and water. On the other hand, only a single light absorber is needed for coupling H2 evolution to organics oxidation in the thermodynamically less demanding photoreforming process. This can be performed by immobilized carbon nitride (CNx) in the case of PC sheets or by a single perovskite light absorber in the case of PEC reforming leaves. Such systems can be integrated with a range of inorganic, molecular, and biological catalysts, including metal alloys, molecular cobalt complexes, enzymes, and bacteria, with low overpotentials and high catalytic activities toward selective product formation.This wide reaction scope introduces new challenges toward quantifying and comparing the performance of different systems. To this end, we propose new metrics to evaluate the performance of solar fuel panels based on the areal product rates and commercial product value. We further explore the key opportunities and challenges facing the commercialization of thin film technologies for solar fuels research, including performance losses over larger areas and catalyst/device recyclability. Finally, we identify emerging applications beyond fuels, where such light-driven panels can make a difference, including the waste management, chemical synthesis, and pharmaceutical industries. In the long term, these aspects may facilitate a transition toward a light-driven circular economy.

Bio-Electrocatalytic Conversion of Food Waste to Ethylene via Succinic Acid as the Central Intermediate.

Ethylene is an important feedstock in the chemical industry, but currently requires production from fossil resources. The electrocatalytic oxidative decarboxylation of succinic acid offers in principle an environmentally friendly route to generate ethylene. Here, a detailed investigation of the role of different carbon electrode materials and characteristics revealed that a flat electrode surface and high ordering of the carbon material are conducive for the reaction. A range of electrochemical and spectroscopic approaches such as Koutecky-Levich analysis, rotating ring-disk electrode (RRDE) studies, and Tafel analysis as well as quantum chemical calculations, electron paramagnetic resonance (EPR), and in situ infrared (IR) spectroscopy generated further insights into the mechanism of the overall process. A distinct reaction intermediate was detected, and the decarboxylation onset potential was determined to be 2.2-2.3 V versus the reversible hydrogen electrode (RHE). Following the mechanistic studies and electrode optimization, a two-step bio-electrochemical process was established for ethylene production using succinic acid sourced from food waste. The initial step of this integrated process involves microbial hydrolysis/fermentation of food waste into aqueous solutions containing succinic acid (0.3 M; 3.75 mmol per g bakery waste). The second step is the electro-oxidation of the obtained intermediate succinic acid to ethylene using a flow setup at room temperature, with a productivity of 0.4-1 µmol ethylene cmelectrode -2 h-1. This approach provides an alternative strategy to produce ethylene from food waste under ambient conditions using renewable energy.

The Perfect Imperfections in Electrocatalysts.

Modern day electrochemical devices find applications in a wide range of industrial sectors, from consumer electronics, renewable energy management to pollution control by electric vehicles and reduction of greenhouse gas. There has been a surge of diverse electrochemical systems which are to be scaled up from the lab-scale to industry sectors. To achieve the targets, the electrocatalysts are continuously upgraded to meet the required device efficiency at a low cost, increased lifetime and performance. An atomic scale understanding is however important for meeting the objectives. Transitioning from the bulk to the nanoscale regime of the electrocatalysts, the existence of defects and interfaces is almost inevitable, significantly impacting (augmenting) the material properties and the catalytic performance. The intrinsic defects alter the electronic structure of the nanostructured catalysts, thereby boosting the performance of metal-ion batteries, metal-air batteries, supercapacitors, fuel cells, water electrolyzers etc. This account presents our findings on the methods to introduce measured imperfections in the nanomaterials and the impact of these atomic-scale irregularities on the activity for three major reactions, oxygen evolution reaction (OER), oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER). Grain boundary (GB) modulation of the (ABO3 )n type perovskite oxide by noble metal doping is a propitious route to enhance the OER/ORR bifunctionality for zinc-air battery (ZAB). The perovskite oxides can be tuned by calcination at different temperatures to alter the oxygen vacancy, GB fraction and overall reactivity. The oxygen defects, unsaturated coordination environment and GBs can turn a relatively less active nanostructure into an efficient redox active catalyst by imbibing plenty of electrochemically active sites. Obviously, the crystalline GB interface is a prerequisite for effective electron flow, which is also applicable for the crystalline surface oxide shell on metal alloy core of the nanoparticles (NPs). The oxygen vacancy of two-dimensional (2D) perovskite oxide can be made reversible by the A-site termination of the nanosheets, facilitating the reversible entry and exit of a secondary phase during the redox processes. In several instances, the secondary phases have been observed to introduce the right proportion of structural defects and orbital occupancies for adsorption and desorption of reaction intermediates. Also, heterogeneous interfaces can be created by wrapping the perovskite oxide with negatively charged surface by layered double hydroxide (LDH) can promote the OER process. In another approach, ion intercalation at the 2D heterointerfaces steers the interlayer spacing that can influence the mass diffusion. Similar to anion vacancy, controlled formation of the cation vacancies can be achieved by exsolving the B-site cations of perovskite oxides to surface anchored catalytically active metal/alloy NPs. In case of the alloy electrocatalysts, incomplete solid solution by two or more mutually immiscible metals results in heterogeneous alloys having differently exposed facets with complementary functionalities. From the future perspective, new categories of defect structures including the 2D empty spaces or voids leading to undercoordinated sites, the multiple interfaces in heterogeneous alloys, antisite defects between anions and cations, and the defect induced inverse charge transfer should bring new dimensionalities to this riveting area of research.

Single-Source Deposition of Mixed-Metal Oxide Films Containing Zirconium and 3d Transition Metals for (Photo)electrocatalytic Water Oxidation.

The fabrication of mixed-metal oxide films holds promise for the development of practical photoelectrochemical catalyst coatings but currently presents challenges in terms of homogeneity, cost, and scalability. We report a straightforward and versatile approach to produce catalytically active zirconium-based films for electrochemical and photoelectrochemical water oxidation. The mixed-metal oxide catalyst films are derived from novel single-source precursor oxide cage compounds containing Zr with first-row transition metals such as Co, Fe, and Cu. The Zr-based film doped with Co on fluorine-doped tin oxide (FTO)-coated glass exhibits the highest electrocatalytic O2 evolution performance in an alkaline medium and an operational stability above 18 h. The deposition of this film onto a BiVO4 photoanode significantly enhances its photoelectrochemical activity toward solar water oxidation, lowering the onset potential by 0.12-0.21 V vs reversible hydrogen electrode (RHE) and improving the maximum photocurrent density by ∼50% to 2.41 mA cm-2 for the CoZr-coated BiVO4 photoanodes compared to that for bare BiVO4.

Cs3Bi2I9 nanodiscs with phase and Bi(III) state stability under reductive potential or illumination for H2 generation from diluted aqueous HI.

The increasingly popular, lead-free perovskite, Cs3Bi2I9 has a vulnerable Bi3+ state under reductive potentials, due to the high standard reduction potential of Bi3+/Biδ+ (0 < δ < 3). Contrary to this fundamental understanding, herein, ligand-coated Cs3Bi2I9 nanodiscs (NDs) demonstrate outstanding electrochemical stability with up to -1 V versus a saturated calomel electrode in aqueous 0.63 M (5% v/v) and 6.34 M (50% v/v) hydroiodic acid (HI), with a minor BiI3 fraction due to the unavoidable partial aqueous disintegration of the perovskite phase after 8 and 16 h, respectively. A dynamic equilibrium of saturated 0.005 M NDs maintains the common ion effect of I-, and remarkably stabilizes ∼93% Bi3+ in 0.63 M HI under a strong reductive potential. In comparison, the hexagonal phase of bulk Cs3Bi2I9 disintegrates considerably in the semi-aqueous media. Lowering the concentration of synthetic HI from the commonly used ∼50% v/v by elevating the pH from -0.8 to 0.2 helps in reducing the cost per unit of H2 production. Our Cs3Bi2I9 NDs with a hexagonal lattice have 4-6 (002) planes stacked along the c-axis. With 0.005 M photostable NDs, 22.5 µmol h-1 H2 is photochemically obtained within 8 h in a 6.34 M HI solution. Electrocatalytic H2 evolution occurs with a turnover frequency of 11.7 H2 per s at -533 mV and outstanding operational stability for more than 20 h.

Conversion of Polyethylene Waste into Gaseous Hydrocarbons via Integrated Tandem Chemical-Photo/Electrocatalytic Processes.

The chemical inertness of polyethylene makes chemical recycling challenging and motivates the development of new catalytic innovations to mitigate polymer waste. Current chemical recycling methods yield a complex mixture of liquid products, which is challenging to utilize in subsequent processes. Here, we present an oxidative depolymerization step utilizing diluted nitric acid to convert polyethylene into organic acids (40% organic acid yield), which can be coupled to a photo- or electrocatalytic decarboxylation reaction to produce hydrocarbons (individual hydrocarbon yields of 3 and 20%, respectively) with H2 and CO2 as gaseous byproducts. The integrated tandem process allows for the direct conversion of polyethylene into gaseous hydrocarbon products with an overall hydrocarbon yield of 1.0% for the oxidative/photocatalytic route and 7.6% for the oxidative/electrolytic route. The product selectivity is tunable with photocatalysis using TiO2 or carbon nitride, yielding alkanes (ethane and propane), whereas electrocatalysis on carbon electrodes produces alkenes (ethylene and propylene). This two-step recycling process of plastics can use sunlight or renewable electricity to convert polyethylene into valuable, easily separable, gaseous platform chemicals.

Is Vibrio fluvialis emerging as a pathogen with epidemic potential in coastal region of eastern India following cyclone Aila?

An isolated area with diarrhoea epidemic was explored at Pakhirala village of the Sundarbans, a coastal region of South 24 Parganas district of West Bengal, eastern India. The Pakhirala village was surrounded by other villages affected by a similar epidemic. The affected villages experienced this epidemic following the cyclone Aila, which had hit the coastal region of the Sundarbans in eastern India. In Pakhirala, the situation was the worst. Within a span of six weeks (5 June-20 July 2009), 3,529 (91.2%) of 3,871 residents were affected by watery diarrhoea. Of all the cases (n = 3,529), 918 (26%) were affected by moderate to severe diarrhoea. In other villages, 28,550 (70%) of the 40,786 people were affected; of them, 3,997 (14%) had moderate to severe watery diarrhoea. The attack rate and the severity of the cases were significantly higher in Pakhirala village compared to other affected villages. The laboratory results revealed that Vibrio fluvialis was the predominant pathogen in Pakhirala village (5 of 6 laboratory-confirmed organisms) whereas Vibrio cholerae O1 Ogawa was the predominant pathogen in other villages of Gosaba block (7 of 9 bacteriologically-confirmed organisms). This result indicates that V fluvialis behaves more aggressively than V cholerae O1 in an epidemic situation with a higher attack rate and a different clinical picture. An in-depth study is required to explore its pathogenicity in detail, geographical distribution, and possible control measures, including development of specific vaccine preparation and determination of its efficacy.