Dosimetric analysis of intensity-modulated radiation therapy and volumetric-modulated arc therapy in comparison with conventional box technique in the treatment of carcinoma cervix: An impact of prosthetic implant.

Introduction: The number of patients for carcinoma cervix with implanted hip prostheses has been increasing worldwide during the past several decades. Technological advancements are useful for delivering higher doses, i.e., dose escalation to the target, but the presence of high-density implanted hip prosthesis creates challenges for the planner. Materials and Methods: A population of 25 patients was selected for the study. Plans were generated using the MONACO treatment planning system keeping the isocenter same. The parameters evaluated for planning target volume (PTV) were D98%, D50%, D2%, Dmax, Dmean, V107%, and V110%. Similarly, the parameters Dmax, Dmean, and D2cc were evaluated for the delineated critical organs. Average monitor units (TMUmean) were also assessed. Results: D98% of PTV was 44.51 (standard deviation [SD]: 0.13) Gy, 44.41 (SD: 0.38) Gy, 44.58 (SD: 0.14) Gy, 44.08 (SD: 0.41) Gy and 44.46 (SD: 0.32) Gy for 4F, intensity-modulated radiation therapy (IMRT), IMRT_WP, volumetric-modulated arc therapy (VMAT), and VMAT_WP techniques, respectively, where WP stands for "without prosthesis". Volume of bowel receiving 45 Gy was 86.82 (SD: 66.38) cm3, 6.97 (SD: 5.77) cm3, 14.11 (SD: 14.29) cm3, 13.31 (SD: 6.57) cm3, and 10.31 (SD: 10.94) cm3 for 4F, IMRT, IMRT_WP, VMAT and VMAT_WP techniques, respectively. Discussion: Radiotherapy is standard care of practice for known cases of cervical malignancies. As per our investigations, VMAT has generated comparable plans in terms of target coverage (D98%) as compared to IMRT and 4F techniques (P = 0.015 and P = 0.002) and with prosthesis also (P = 0.024). The mean dose to the bladder was significantly lesser with IMRT and VMAT. Our results highlight that VMAT has reduced the mean dose to the rectum (P = 0.001) in presence of high-density implant. The mean dose to femoral heads was also reduced when compared with the 4-field technique. Conclusion: VMAT has an edge over other techniques in terms of target coverage and sparing of critical organs in the presence of metallic prosthesis. Information about the geometry and density of prosthesis will be beneficial for treatment planning.

Dosimetric Influence of Acuros XB Dose-to-Medium and Dose-to-Water Reporting Modes on Carcinoma Cervix Using Intensity-Modulated Radiation Therapy and Volumetric RapidArc Technique.

Aim: We aimed to evaluate the dosimetric influence of Acuros XB (AXB) dose-to-medium (Dm) and dose-to-water (Dw) reporting mode on carcinoma cervix using intensity-modulated radiation therapy (IMRT) and RapidArc (RA) technique. Materials and Methods: A cohort of thirty patients cared for carcinoma cervix was retrospectively selected for the study. Plans were computed using analytical anisotropic algorithm (AAA), AXB-Dm, and AXB-Dw algorithms for dosimetric comparison. A paired t-test and Pitman-Morgan dispersion test were executed to appraise the difference in mean values and the inter-patient variability of the differences. Results: The dose-volume parameters were higher for AXB-Dw in contrast to AAA for IMRT and RA plans, excluding D98%, minimum dose to planning target volume (PTV) and rectum mean dose (RA). There was no systematic trend observed in dose-volume parameters for PTV and organs at risk (OARs) between AXB-Dm and AXB-Dw for IMRT and RA plans. The dose-volume parameters for target were higher for AXB-Dm in comparison to AAA in IMRT and RA plans, except D98% and minimum dose to PTV. Analysis envisaged less inter-patient variability while switching from AAA to AXB-Dm in comparison to those switching from AAA to AXB-Dw. Conclusions: The present study reveals the important difference between AAA, AXB-Dm, and AXB-Dw computations for cervix carcinoma using IMRT and RA techniques. The inter-patient variability and systematic difference in dose-volume parameters computed using AAA, AXB-Dm, and AXB-Dw algorithms present the possible impact on the dose prescription to PTV and their relative constraints to OARs for IMRT and RA techniques. This may help in the decision-making in clinic while switching from AAA to AXB (Dm or Dw) algorithm for cervix carcinoma using IMRT and RA techniques.

To Study the Impact of Different Optimization Methods on Intensity-Modulated Radiotherapy and Volumetric-Modulated Arc Therapy Plans for Hip Prosthesis Patients.

Purpose: To study the impact of different optimization methods in dealing with metallic hip implant using intensity-modulated radiotherapy (IMRT) and volumetric-modulated arc therapy (VMAT) techniques. Materials and Methods: A cohort of 16 patients having metallic implants was selected for the study. Three sets of IMRT and VMAT plans were generated. Set 1 IMRT (IM_Base), VMAT (VM_Base) without any restrictions on beam entry and exit, set 2 (IM_ENT and VM_ENT) optimizer restricts the beam entry and set 3 (IM_EXT+ENT), neither entry nor exit doses were allowed toward the metallic implant. Results: There was no significant difference in target (D95%) and organ-at-risk doses between IM_Base and IM_ENT. There were significant (P = 0.002) improvements in planning target volume (PTV) V95% and homogeneity from IM_EXT+ENT to IM_ENT. There was no significant difference in plan quality between VM_Base and VM_ENT. There were significant (P = 0.005) improvements in PTV, V95%, homogeneity from VM_EXT+ENT to VM_ENT. V40Gy, V30Gy for bladder, rectum, bowel, and bowel maximum dose decreases significantly (P < 0.005) in IM_ENT compared to IM_EXT+ENT, but not significant for VMAT plans. Similarly, there was a significant decrease in dose spill outside target (P < 0.05) comparing 40%, 50%, 60%, and 70% dose spills for IM_ENT compared to IM_EXT+ENT, but variations among VMAT plans are insignificant. VMAT plans were always superior to IMRT plans for the same optimization methods. Conclusion: The best approach is to plan hip prosthesis cases with blocked entry of radiation beam for IMRT and VMAT. The VMAT plans had more volumetric coverage, fewer hotspots, and lesser heterogeneity.

Dosimetric validation of Acuros® XB algorithm for RapidArc™ treatment technique: A post software upgrade analysis.

AIM: To validate the Acuros® XB (AXB) algorithm in Eclipse treatment planning system (TPS) for RapidArc™ (RA) technique following the software upgrades. MATERIALS AND METHODS: A Clinac-iX (2300CD) linear accelerator and Eclipse TPS (Varian Medical System, Inc., Palo Alto, USA) was used for commissioning of AXB algorithm using a 6 megavolts photon beam. Percentage depth dose (PDD) and profiles for field size 2 cm × 2 cm, 4 cm × 4 cm, 6 cm × 6 cm, 10 cm × 10 cm, 20 cm × 20 cm, 30 cm × 30 cm to 40 cm × 40 cm were taken. AXB calculated PDDs and profiles were evaluated against the measured and analytical anisotropic algorithm (AAA)-calculated PDDs and profiles. Test sites recommended by American Association of Physicists in Medicine task group (AAPM TG)-119 recommendation were used for RA planning and delivery verification using AXB algorithm.Dosimetric analysis of AXB calculated data showed that difference between calculated and measured data for PDD curves were maximum <1% beyond the depth of dose maximum and computed profiles in central region matches with maximum <1% for all considered field sizes. Ion-chamber measurements showed that the average confidence limit (CLs) was 0.034 and 0.020 in high-gradient and 0.047 and 0.042 in low-gradient regions, respectively, for AAA and AXB calculated RA plans. Portal measurements show the average CLs were 2.48 and 2.58 for AAA and AXB-calculated RA plans, with gamma passing criteria of 3%/3 mm. CONCLUSIONS: AXB shows excellent agreement with measurements and AAA calculated data. The CLs were consistent with the baseline values published by TG-119. AXB algorithm has the potential to perform photon dose calculation with comparable fast calculation speed without negotiating the accuracy. AAPM TG-119 was successfully implemented to access the proper configuration of AXB algorithm following the TPS upgrade.

Effect of contrast medium on treatment modalities planned with different photon beam energies: a planning study.

BACKGROUND: Routinely, patient's planning scans are acquired after administration of iodinized contrast media but they will be treated in the absence of that. Similarly, high energy photons have a better penetrating power, while low energy photons will result in tighter dose distribution and negligible neutron contamination. The aim of the study was to investigate a suitable photon beam energy in the presence of intravenous contrast medium. MATERIALS AND METHODS: An indigenously made original-contrast (OC) phantom was mentioned as virtual-contrast (VC) and virtual-without-contrast (VWC) phantom were generated by assigning the Hounsfield Units (HU) to different structures. Intensity-modulated (IMRT) and volumetric-modulated-arc (VMAT) plans were generated as per criteria of the TG-119 protocol. RESULTS: It was observed that the maximum dose to the spinal cord was better with 6 mega-voltage (MV) in IMRT. The coverage of Prostate PTV (PR PTV) was similar with all the photon energies and was comparable with TG-119, except for original-contrast (OC) phantom using the VMAT technique. Homogeneity-index (HI) was comparatively better for VMAT plans. CONCLUSION: The contrast CT images lower the dose to targets. IMRT or VMAT plans, generated on such CT images will be delivered with higher doses than evaluated. However, the overdose remains non-significant.

Dosimetric impact of Acuros XB on cervix radiotherapy using RapidArc technique: a dosimetric study.

BACKGROUND: Acuros XB (AXB) may predict better rectal toxicities and treatment outcomes in cervix carcinoma. The aim of the study was to quantify the potential impact of AXB computations on the cervix radiotherapy using the RapidArc (RA ) technique as compared to anisotropic analytical algorithm (AA) computations. MATERIALS AND METHODS: A cohort of 30 patients previously cared for cervix carcinoma (stages II-IIIB) was selected for the present analysis. The RA plans were computed using AA and AXB dose computation engines under identical beam setup and MLC pattern. RESULTS: There was no significant (p > 0.05) difference in D95% and D98% to the planning target volume (PTV); moreover, a significant (p < 0.05) rise was noticed for mean dose to the PTV (0.26%), D50% (0.26%), D2% (0.80%) and V110% (44.24%) for AXB computation as compared to AA computations. Further, AXB estimated a significantly (p < 0.05) lower value for maximum and minimum dose to the PTV. Additionally, there was a significant (p < 0.05) reduction observed in mean dose to organs at risk (OARs) for AXB computation as compared to AA, though the reduction in mean dose was non-significant (p > 0.05) for the rectum. The maximum difference observed was 4.78% for the rectum V50Gy, 1.72%, 1.15% in mean dose and 2.22%, 1.48% in D2% of the left femur and right femur, respectively, between AA and AXB dose estimations. CONCLUSION: For similar target coverage, there were significant differences observed between the AAA and AXB computations. AA underestimates the V50Gy of the rectum and overestimates the mean dose and D2% for femoral heads as compared to AXB. Therefore, the use of AXB in the case of cervix carcinoma may predict better rectal toxicities and treatment outcomes in cervix carcinoma using the RA technique.

Feasibility of Monte-Carlo algorithm in comparison with collapse-cone dose calculation algorithm of a commercial treatment planning system in the presence of high-density metallic implant: a dosimetric study.

BACKGROUND: The number of people with implanted hip prosthesis has grown worldwide. For radiotherapy planning of patients with hip implants, few main challenges are encountered. The aim of the present study was to evaluate the feasibility of different planning algorithms in the presence of high-density metallic implant in the treatment of patients with carcinoma cervix. RESULTS: It was found that D98% were 44.49 ± 0.11, 44.51 ± 0.13, 44.39 ± 0.22, and 44.45 ± 0.16 Gy for 4FMC6MV (4-field technique calculated with Monte-Carlo algorithm and 6 MV photon energy), 4FMC6MV_WP (4-field technique calculated with Monte-Carlo algorithm and 6 MV photon energy without prosthesis), 4FCC6MV (4-field technique calculated with collapse-cone-convolution algorithm and 6 MV photon energy), and 4FCC6MV_WP (4-field technique calculated with collapse-cone-convolution algorithm and 6 MV photon energy without prosthesis) respectively. Similarly, D2% were 49.40 ± 0.84, 49.05 ± 0.76, 48.97 ± 0.91, and 48.57 ± 0.85 Gray (Gy) for 4FMC6MV, 4FMC6MV_WP, 4FCC6MV, and 4FCC6MV_WP respectively. The present study has not suggested any major difference between the Monte-Carlo (MC) and collapse-cone-convolution (CCC) calculation algorithm in the presence of high-Z metallic implants. Volume of bowel receiving 15 Gy dose has shown a significant difference with prosthesis cases. This study investigates that hip prosthesis creates considerable changes in the treatment planning of cervical malignancies. CONCLUSION: CCC algorithm is in good agreement with MC calculation algorithm in the presence of high-density metallic implants in terms of target coverage and avoidance organ sparing except few parameters.

Effect of Hip Prosthesis on Photon Beam Characteristics in Radiological Physics.

INTRODUCTION: Aim of study is to investigate the effect of hip prosthesis on 6 and 15 MV photon beam energies. MATERIALS AND METHODS: Prosthesis was kept at the level of tray position. The measurements were done on Varian Clinac-iX linac. Customized prosthesis, termed as Prosthetic Metal Implant (PMI) was made up of wrought austenitic stainless steel rod and covered with paraffin-wax. 'Standard prosthesis' was made up of wrought titanium alloy. The dose profiles were measured for three field sizes i.e. 5, 10 and 20 cm at 100 cm SSD for 6 and 15 MV energies. The perturbation index (PI) was also calculated. RESULTS: Perturbation caused by standard prosthesis was approximately 50% higher than that of PMI. This result may be due to difference in dimension and not because of material composition. Variation of central axis dose might be due to the dimensions of PMI used for experiment which gave intermediate response (e.g. 102.1%, 141.0% and 117.7% for Open, Standard and PMI respectively for 10x10 cm2 field size, 10 cm depth and 15MV photon beam setup )as compared to the 'open' and 'standard' prosthesis. Percentage dose at 10 cm for 6MV photon increased rapidly with field-size for PMI. But, for 15MV photon, difference was not significant. Surface dose (Ds) for PMI remains significantly higher for smaller field. CONCLUSION: The perturbation index varied from 0.05 to 0.22 for the measured energies and gave an idea to the planner to assess the behavior of the prosthesis. This range is applicable for both type of implants and for all clinical field-sizes. The attenuation caused by the prosthesis was significant and this effect should be considered in the treatment planning calculations.

Impact of acuros XB algorithm in deep-inspiration breath-hold (DIBH) respiratory techniques used for the treatment of left breast cancer.

AIM: To investigate the impact of Acuros XB (AXB) algorithm in the deep-inspiration breath-hold (DIBH) technique used for treatment of left sided breast cancer. BACKGROUND: AXB may estimate better lung toxicities and treatment outcome in DIBH. MATERIALS AND METHODS: Treatment plans were computed using the field-in-field technique for a 6 MV beam in two respiratory phases - free breathing (FB) and DIBH. The AXB-calculations were performed under identical beam setup and the same numbers of monitor units as used for AAA-calculation. RESULTS: Mean Hounsfield units (HU), mass density (g/cc) and relative electron density were -782.1 ±â€¯24.8 and -883.5 ±â€¯24.9; 0.196 ±â€¯0.025 and 0.083 ±â€¯0.032; 0.218 ±â€¯0.025 and 0.117 ±â€¯0.025 for the lung in the FB and DIBH respiratory phase, respectively. For a similar target coverage (p > 0.05) in the DIBH respiratory phase between the AXB and AAA algorithm, there was a slight increase in organ at risk (OAR) dose for AXB in comparison to AAA, except for mean dose to the ipsilateral lung. AAA predicts higher mean dose to the ipsilateral lung and lesser V20Gy for the ipsilateral and common lung in comparison to AXB. The differences in mean dose to the ipsilateral lung were 0.87 ±â€¯2.66 % (p > 0.05) in FB, and 1.01 ± 1.07% (p < 0.05) in DIBH, in V20Gy the differences were 1.76 ±â€¯0.83% and 1.71 ±â€¯0.82% in FB (p < 0.05), 3.34 ± 1.15 % and 3.24 ± 1.17 % in DIBH (p < 0.05), for the ipsilateral and common lung, respectively. CONCLUSION: For a similar target volume coverage, there were important differences between the AXB and AAA algorithm for low-density inhomogeneity medium present in the DIBH respiratory phase for left sided breast cancer patients. DIBH treatment in conjunction with AXB may result in better estimation of lung toxicities and treatment outcome.

Validation of the RapidArc Delivery System Using a Volumetric Phantom as Per Task Group Report 119 of the American Association of Physicists in Medicine.

AIM: This study validated the RapidArc (RA) delivery using a volumetric ArcCHECK phantom as per the guidelines proposed in Task Group Report 119 from the American Association of Physicists in Medicine Task group 119 (AAPM TG 119). This study also investigated the impact of the Acuros XB (AXB) algorithm in comparison to analytical anisotropic algorithm (AAA) on the RA dose calculations in the homogeneous medium of the ArcCHECK phantom. MATERIALS AND METHODS: A volumetric ArcCHECK phantom along with AAPM TG 119 tests was used to evaluate the RA plans and verify the dose delivery for photon beam of 6 MV energy. RESULTS: The RA planning results were comparable and satisfied the planning criteria stated in the TG 119 report for all test cases. The average percentage gamma passing rates for the AAA-calculated plans were 98.5 (standard deviation [SD]: 0.6), 98.5 (SD: 1.3), and 98.1 (SD: 2.0) and for the AXB-calculated plans were 95.1 (SD: 1.8), 96.1 (SD: 1.3), and 94.0 (SD: 0.9) for the Clinac-iX (6 MV) and TrueBeam (TB)-STx (6 MV_filtered beam [FB] and 6 MV_flattening filter-free beam [FFFB]), respectively. For ion chamber measurements, the average percentage dose differences for the AAA-calculated plans were 1.5 (SD: 2.5), 2.7 (SD: 1.4), and 1.4(SD: 2.7) and for AXB-calculated plans were 2.3 (SD: 1.6), 3.2 (SD: 1.5), and 2.3 (SD: 2.0) for Clinac-iX (6 MV) and TB-STx (6 MV_FB and 6 MV_FFFB), respectively. CONCLUSION: Thus, the ArcCHECK can successfully be utilized for the validation of the RA delivery. The AXB has potential to perform dose calculations comparable to those of the AAA for RA plans in the homogeneous medium of the ArcCHECK phantom.

Image-guided volumetric modulated arc therapy (IG-VMAT) for unresectable ACC of the trachea: a feasible curative option.

A middle-aged man presented with progressively worsening breathlessness and non-productive cough for the last 3 months. On examination, his breathing was stridulous and air entry was decreased bilaterally. He underwent emergency fibre-optic bronchoscopy, which revealed a tracheal growth causing luminal narrowing, and after tumour debulking, he improved symptomatically. Histopathological evaluation of the specimen revealed an adenoid cystic carcinoma of the trachea, and systemic evaluation revealed metastatic dissemination. Systemic molecular-targeted therapy was initiated (gefitinib and later imatinib mesylate) and continued for 5 years, in view of stable disease on periodic follow-up. He subsequently presented with breathlessness again, which was managed with an emergency tracheostomy. In view of stable systemic disease and local progression only, he received definitive radiotherapy with image-guided volumetric modulated arc therapy, which resulted in a complete radiological response. The patient has been disease-free for the last 9 months.

Dosimetric Analysis of Unflattened (FFFB) and Flattened (FB) Photon Beam Energy for Gastric Cancers Using IMRT and VMAT-a Comparative Study.

PURPOSE: To evaluate the feasibility of flattening filter free beam (FFFB) for the treatment of gastric tumors and to review their benefits over 6MV flatten beam (6MV_FFB). METHODS: Fifteen patients with histologically proven gastric carcinoma were selected. CT scans with slice thickness of 0.3 cm were acquired and planning target volume (PTV) and organ at risk (OAR) were delineated. Plans were made retrospectively for each patient for the prescription dose of 45 Gy/25 fractions to the PTV. Four isocentric plans were compared in the present study on Varian TrueBeam linear accelerator (Varian Medical Systems, Palo Alto, CA, USA). RESULTS: PTV D98% was 44.41 ± 0.12, 44.38 ± 0.13, 44.59 ± 0.14, and 44.49 ± 0.19 Gy for IMRT 6MV_FFB, IMRT 6MV_FFFB, VMAT 6MV_FFB, and VMAT 6MV_FFFB respectively. 6MV_FFFB beam minimizes the mean heart dose Dmean (P = 0.001). VMAT dominates over IMRT when it came to kidney doses V12Gy (P = 0.02), V23Gy (P = 0.015), V28Gy (P = 0.011), and Dmax (P < 0.01). VMAT has significantly reduced the doses to kidneys. It was analyzed that 6MV_FFFB significantly reduces the dose to normal tissues (P = 0.006 and P = 0.018). VMAT significantly reduces the TMU, which is required to deliver the similar dose by IMRT (P < 0.01). CONCLUSIONS: Unflattened beam spares the organs at risk significantly to avoid the chances of secondary malignancies and reduces the intra-fraction motion during treatment due to provision of higher dose rate. Hence, we conclude that 6MV unflattened beam can be used to treat gastric carcinoma.

Coronal Vertebral Dislocation Due to Congenital Absence of Multiple Thoracic and Lumbar Pedicles: Report of Three Cases, Review of Literature, and Role of Intraoperative CT Navigation.

STUDY DESIGN: Case report OBJECTIVE: To present three cases of coronal vertebral dislocation due to congenital multiple thoracic and lumbar pedicle agenesis. SUMMARY OF BACKGROUND DATA: Congenital pedicle agenesis is an uncommon condition and is frequently identified as an incidental finding on diagnostic imaging in asymptomatic individuals. This agenesis is frequently limited to a single level and is commonly seen in the cervical and lumbar spine. METHODS: We report three patients who presented with multiple thoracic and lumbar pedicle agenesis resulting in coronal vertebral dislocation. The patients presented with progressive kyphoscoliosis deformity. Identification of this malformation on conventional radiographs is difficult, and computed tomographic (CT) scan with 3D reconstruction provides a better delineation of the deformity. RESULTS: Computed tomography showed complete absence of pedicles and dissociation of anterior column from the posterior column, resulting in coronal vertebral dislocation. Magnetic resonance imaging confirmed the absence of pedicles and decreased anteroposterior diameter, causing canal stenosis. Two patients were treated by spanning internal fixation, partial deformity correction, and posterior fusion, with satisfactory results. CONCLUSION: Coronal vertebral dislocation can be easily missed on plain radiograph because many patients with severe scoliotic deformity have thin or sclerotic pedicles. Computed tomography is essential to demonstrate these anomalies. It is important to recognize pedicle aplasia early to prevent rapid progression of deformity and neurologic deficit.

Randomized controlled study comparing simultaneous modulated accelerated radiotherapy versus simultaneous integrated boost intensity modulated radiotherapy in the treatment of locally advanced head and neck cancer.

OBJECTIVES: Comparison of two fractionation schedules of intensity modulated radiotherapy (IMRT) for locally advanced head and neck cancer - simultaneous integrated boost (SIB-IMRT) and simultaneous modulated accelerated radiotherapy (SMART) boost in terms of toxicity and survival end-point measures. PATIENTS AND METHODS: Sixty patients with locally advanced head and neck cancer were randomized in two treatment arms (SIB-IMRT [control arm] and SMART boost arm [study arm]). In the control arm, patients received 70, 63 and 56 Gy in 35 fractions to clinical target volumes (CTV) 1, 2 and 3, respectively. In the study arm, patients received 60 and 50 Gy to CTV 1 and CTV 3, respectively. Toxicities, progression free survival (PFS) and overall survival (OS) were compared between both arms. RESULTS: Baseline patient-related characteristics were comparable between the arms except for primary site of tumour. No significant differences were noted in acute toxicities between the arms except for fatigue which was statistically higher for control arm. No significant differences in 2-year late toxicities were observed. The median follow-up duration was 25.5 (range, 1.8-39.9) months. The 2-year PFS was 53.3% and 80.0% (p = 0.028) for control and study arm, respectively. The 2-year OS was 60.0% and 86.7% (p = 0.020) in control and study arms, respectively. Multivariate analysis showed clinical stage and site to be significant predictors for OS and PFS, respectively. CONCLUSIONS: The SMART boost technique can be a feasible alternative fractionation schedule that reduces the overall treatment time, maintaining comparable toxicity and survival compared with SIB-IMRT.

Accuracy of pedicle screw insertion by AIRO® intraoperative CT in complex spinal deformity assessed by a new classification based on technical complexity of screw insertion.

PURPOSE: To develop a classification based on the technical complexity encountered during pedicle screw insertion and to evaluate the performance of AIRO® CT navigation system based on this classification, in the clinical scenario of complex spinal deformity. MATERIALS AND METHODS: 31 complex spinal deformity correction surgeries were prospectively analyzed for performance of AIRO® mobile CT-based navigation system. Pedicles were classified according to complexity of insertion into five types. Analysis was performed to estimate the accuracy of screw placement and time for screw insertion. Breach greater than 2 mm was considered for analysis. RESULTS: 452 pedicle screws were inserted (T1-T6: 116; T7-T12: 171; L1-S1: 165). The average Cobb angle was 68.3° (range 60°-104°). We had 242 grade 2 pedicles, 133 grade 3, and 77 grade 4, and 44 pedicles were unfit for pedicle screw insertion. We noted 27 pedicle screw breach (medial: 10; lateral: 16; anterior: 1). Among lateral breach (n = 16), ten screws were planned for in-out-in pedicle screw insertion. Among lateral breach (n = 16), ten screws were planned for in-out-in pedicle screw insertion. Average screw insertion time was 1.76 ± 0.89 min. After accounting for planned breach, the effective breach rate was 3.8% resulting in 96.2% accuracy for pedicle screw placement. CONCLUSION: This classification helps compare the accuracy of screw insertion in range of conditions by considering the complexity of screw insertion. Considering the clinical scenario of complex pedicle anatomy in spinal deformity AIRO® navigation showed an excellent accuracy rate of 96.2%.

Dosimetric Comparison of Pencil-Beam Scanning and Photon-Based Radiation Therapy as a Boost in Carcinoma of Cervix.

PURPOSE: Brachytherapy is essential for local treatment in cervical carcinoma, but some patients are not suitable for it. Presently, for these patients, the authors prefer a boost by using intensity-modulated radiation therapy (IMRT). The authors evaluated the dosimetric comparison of proton-modulated radiation therapy versus IMRT and volumetric-modulated arc therapy (VMAT) as a boost to know whether protons can replace photons. PATIENTS AND METHODS: Five patients who received external beam radiation therapy to the pelvis by IMRT were reviewed. Three different plans were made, including pencil beam scanning (PBS), IMRT, and VMAT. The prescribed planning target volume (PTV) was 20 Gy in 4 fractions. The dose to 95% PTV (D95%), the conformity index, and the homogeneity index were evaluated for PTV. The Dmax, D2cc, and Dmean were evaluated for organs at risk along with the integral dose of normal tissue and organs at risk. RESULTS: The PTV coverage was optimal and homogeneous with modulated protons and photons. For PBS, coverage D95% was 20.01 ± 0.02 Gy (IMRT, 20.08 ± 0.06 Gy; VMAT, 20.1 ± 0.04 Gy). For the organs at risk, Dmax of the bladder for PBS was 21.05 ± 0.05 Gy (IMRT, 20.8 ± 0.21 Gy; VMAT, 21.65 ± 0.41 Gy) while the Dmax for the rectum for PBS was 21.04 ± 0.03 Gy (IMRT, 20.81 ± 0.12 Gy; VMAT, 21.66 ± 0.38 Gy). Integral dose to normal tissues in PBS was 14.17 ± 2.65 Gy (IMRT, 25.29 ± 6.35 Gy; VMAT, 25.24 ± 6.24 Gy). CONCLUSIONS: Compared with photons, modulated protons provide comparable conformal plans. However, PBS reduces the integral dose to critical structures significantly compared with IMRT and VMAT. Although PBS may be a better alternative for such cases, further research is required to substantiate such findings.

Dosimetric influence of photon beam energy and number of arcs on volumetric modulated arc therapy in carcinoma cervix: A planning study.

AIM: Aim of the present study was to compare the dosimetric impact of different photon beam energies and number of arcs in the treatment of carcinoma cervix. BACKGROUND: Carcinoma cervix is a common cancer in women worldwide with a high morbidity rate. Radiotherapy is used to treat such tumours. Volumetric Modulated Arc Therapy (VMAT) is considered superior to other techniques with multiple arcs and energies. MATERIALS AND METHODS: Twenty patients with carcinoma cervix underwent radiotherapy in a prospective observation study conducted at our institute. Volumetric modulated arc plans with 6 MV, 10 MV and 15 MV photon energies using single arc (SA) and dual arc (DA) were generated. Several physical indices for planning target volume (PTV) like V95%, V100%, V110%, D98%, D50%, D2% and total number of MUs were compared. Normal Tissue Integral Dose (NTID) and dose to a shell structure PHY2.5 and PHY5.0 were analyzed. RESULTS: Comparable dose coverage to PTV was observed for all the energies and arcs. CI for DA6MV (1.095) was better than SA6MV (1.127), SA10MV (1.116) and SA15MV (1.116). Evaluated parameters showed significant reduction in OAR doses. Mean bladder dose for DA6MV (41.90 Gy) was better than SA6MV (42.48 Gy), SA10MV (42.08 Gy) and SA15MV (41.93 Gy). Similarly, p-value for the mean rectal dose calculated was 0.001 (SA6 vs 15), 0.013 (DA6 vs 10) and 0.003 (DA6 vs 15) and subsequently favoured DA6MV. Difference in NTID was very small. CONCLUSIONS: The study showed no greater advantage of higher energy, and DA VMAT plan with 6 MV photon energy was a good choice of treatment for carcinoma cervix as it delivered a highly homogeneous and conformal plan with superior target coverage and better OAR sparing.

Dosimetric influence of filtered and flattening filter free photon beam on rapid arc (RA) radiotherapy planning in case of cervix carcinoma.

AIM: To investigate the dosimetric influence of filtered and flattening filter free (FFF) photon beam of 6 and 10 MV energies on cervix RA radiotherapy planning and to find possibilities to develop the clinically acceptable RA plans with FFFB photon beam and explore their potential benefits to cervix cancer patients. BACKGROUND: FFF photon beams enhances the treatment delivery by increased dose rate which results in shorter treatment time, this shorter treatment time reduces intrafraction motion and enhance comfort to the patients. MATERIALS AND METHODS: RA plans were generated for filtered and flattening filter free photon beams of 6 and 10 MV energies using same dose-volumes constraints. RA plans were generated to deliver a dose of 50.4 Gy in 28 fractions, for a cohort of eleven patients reported with cervix carcinoma. RA plans were evaluated in terms of PTV coverage, dose to OAR's, CI, HI, total no. of monitor units (MUs) and NTID and low dose volume of normal tissues. RESULTS: Clinically acceptable and similar plans were generated for filtered and flattening filter free photon beams. FFFB delivered slightly higher mean target dose (52.28 Gy vs. 52.0 Gy, p = 0.000 for 6 MV and 52.42 Gy vs. 52.0 Gy, p = 0.000 for 10 MV) less homogeneous (1.062 vs. 1.052, p = 0.000 for 6 MV and 1.066 vs. 1.051, p = 0.000 for 10 MV) and less conformal (1.007 vs. 1.004, p = 0.104 for 6 MV and 1.012 vs. 1.003, p = 0.010 for 10 MV) RA plans compared to FB. FFFB delivered more doses to the bladder and rectum, also required more numbers of MUs in comparison to FB. CONCLUSIONS: This study concludes that FB is more beneficial for cervix RA planning in comparison to FFFB, as FB generates more conformal and homogenous rapid arc plans and offers better OAR's sparing.

Measurement and comparison of head scatter factor for 7 MV unflattened (FFF) and 6 MV flattened photon beam using indigenously designed columnar mini phantom.

AIM: To measure and compare the head scatter factor for 7 MV unflattened and 6 MV flattened photon beam using a home-made designed mini phantom. BACKGROUND: The head scatter factor (Sc) is one of the important parameters for MU calculation. There are multiple factors that influence the Sc values, like accelerator head, flattening filter, primary and secondary collimators. MATERIALS AND METHODS: A columnar mini phantom was designed as recommended by AAPM Task Group 74 with high and low atomic number material for measurement of head scatter factors at 10 cm and d max dose water equivalent thickness. RESULTS: The Sc values measured with high-Z are higher than the low-Z mini phantoms observed for both 6MV-FB and 7MV-UFB photon energies. Sc values of 7MV-UFB photon beams were smaller than those of the 6MV-FB photon beams (0.6-2.2% (Primus), 0.2-1.4% (Artiste) and 0.6-3.7% (Clinac iX (2300CD))) for field sizes ranging from 10 cm × 10 cm to 40 cm × 40 cm. The SSD had no influence on head scatter for both flattened and unflattened beams. The presence of wedge filters influences the Sc values. The collimator exchange effects showed that the opening of the upper jaw increases Sc irrespective of FF and FFF. CONCLUSIONS: There were significant differences in Sc values measured for 6MV-FB and unflattened 7MV-UFB photon beams over the range of field sizes from 10 cm × 10 cm to 40 cm × 04 cm. Different results were obtained for measurements performed with low-Z and high-Z mini phantoms.

The dosimetric impact of different photon beam energy on RapidArc radiotherapy planning for cervix carcinoma.

The main purpose of this study is to know the effect of three different photon energies viz., 6, 10, and 15 mega voltage (MV) on RapidArc (RA) planning for deep-seated cervix tumor and to develop clinically acceptable RA plans with suitable photon energy. RA plans were generated for 6, 10, and 15 MV photon energies for twenty patients reported with cervix carcinoma. RA plans were evaluated in terms of planning target volume (PTV) coverage, dose to organs at risk (OARs), conformity index (CI), homogeneity index (HI), gradient measure, external volume index of dose distribution produced, total number of monitor units (MUs), nontumor integral dose (ID), and low dose volume of normal tissue. A two-sample paired t-test was performed to compare the dosimetric parameters of RA plans. Irrespective of photon energy used for RA planning, plans were dosimetrically similar in terms of PTV coverage, OARs sparing, CI and HI. The numbers of MUs were 13.4 ± 1.4% and 18.2 ± 1.5% higher and IDs were 2.7 ± 0.8% and 3.7 ± 0.9% higher in 6 MV plans in comparison to that in the 10 and 15 MV plans, respectively. V1Gy, V2Gy, V3Gy, and V4Gy were higher in 6 MV plans in comparison to that in 10 and 15 MV plans. Based on this study, 6 MV photon beam is a good choice for RA planning in case of cervix carcinoma, as it does not deliver additional exposure to patients caused by photoneutrons produced in high energy beams.