Pathways to Upscaling Highly Efficient Organic Solar Cells Using Green Solvents: A Study on Device Photophysics in the Transition from Lab-to-Fab.

As the rise of nonfullerene acceptors (NFA) has allowed lab-scale organic solar cells (OSC) to reach 20% efficiency, translating these devices into roll-to-roll compatible fabrication still poses many challenges for researchers. Among these are the use of green solvent solubility for large-scale manufacture, roll-to-roll compatible fabrication, and, not least, information on charge carrier dynamics in each upscaling step, to further understand the gap in performance. In this work, the reproducibility of champion devices using slot-die coating with 14% power conversion efficiency (PCE) is demonstrated, under the condition that the optimal thickness is maintained. It is further shown that for the donor:acceptor (D:A) blend PM6:Y12, the processing solvent has a more significant impact on charge carrier dynamics compared to the deposition technique. It is found that the devices processed with o-xylene feature a 40% decrease in the bimolecular recombination coefficient compared to those processed with CB, as well as a 70% increase in effective mobility. Finally, it is highlighted that blade-coating yields devices with similar carrier dynamics to slot-die coating, making it the optimal choice for lab-scale optimization with no significant loss in translation toward up-scale.

Jaws of knowledge: an analysis of temporomandibular joint insights in dental training-a quasi-experiment study.

Objectives: To access the knowledge of undergraduate and postgraduate students of the dental college on basic anatomy, physiology, clinical examination, and pathology of the temporomandibular joint (TMJ). Materials and Methods: A total of 610 undergraduate and postgraduate students of dental college, were included in this study. The questionnaire was pretested for validation and distributed online through Google forms. Results: A pairwise comparison showed that the percentage of correct answers for interns significantly differed from that of IV Bachelor of Dental Surgery (P=0.050) and postgraduate students (P=0.048) (below average: up to 6 correct answers, good: 7-11 correct answers, excellent: 12 or more correct answers). Conclusion: TMJ diseases are common in daily life but frequently go undiagnosed and untreated due to a lack of clinical expertise. This demonstrates the necessity of providing instructions that give students in-depth knowledge and abilities for TMJ issues in clinical practice.

Postharvest handling of ethylene with oxidative and absorptive means.

Fruit ripening is an unfolding of a series of genetically-programmed modifications and tend to be highly orchestrated irrevocable phenomenon mediated by ethylene. Phytohormone ethylene also leads to over-ripening, senescence, loss of texture, microbial attack, reduced post-harvest life and other associated problems during storage and transportation of fruits. Its harmful impacts on fresh fruits, vegetables, and ornamentals result in substantial product losses even up to 80%. Curbing of this inevitable menace is therefore need of the hour. Accrual of ethylene in packaging system should fundamentally be ducked to extend the shelf-life and uphold an adequate superiority of perishables in visual and organoleptic terms. The current review discusses about properties, factors affecting and impact of ethylene, intimidation of its impact at gene vis-à-vis activity level using gene-modification/inhibition techniques, chemical/physical in conjunction with other suitable approaches. It also entails the most commercially cultivated approaches worldwide viz. KMnO4-based oxidation together with adsorption-based scrubbing of ethylene in thorough details. Future ethylene removal strategies should focus on systematic evaluation of KMnO4-based scavenging, exploring the mechanism of adsorption, adsorbent(s) behavior in the presence of other gases and their partial pressures, volatiles, temperature, relative humidity, development of hydrophobic adsorbents to turn-up under high RH, regeneration of adsorbent by desorption, improvement in photocatalytic oxidation etc. and further improvements thereof. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05777-1.

Dual carbon isotope-based brown carbon aerosol characteristics at a high-altitude site in the northeastern Himalayas: Role of biomass burning.

PM2.5 samples (n = 34) were collected from January to April 2017 over Shillong (25.7°N, 91.9°E; 1064 m amsl), a high-altitude site situated in the northeastern Himalaya. The main aim was to understand the sources, characteristics, and optical properties of local vs long-range transported carbonaceous aerosols (CA) using chemical species and dual carbon isotopes (13C and 14C). Percentage biomass burning (BB)/biogenic fraction (fbio, calculated from 14C) varied from 67 to 92 % (78 ± 7) and correlated well with primary BB tracers like f60, and K+, suggesting BB as a considerable source. Rain events are shown to reduce the fbio fraction, indicating majority of BB-derived CA are transported. Further, δ13C (-26.6 ± 0.4) variability was very low over Shillong, suggesting it's limitations in source apportionment over the study region, if used alone. Average ratio of absorption coefficient of methanol-soluble BrC (BrCMS) to water-soluble BrC (BrCWS) at 365 nm was 1.8, indicating a significant part of BrC was water-insoluble. A good positive correlation between fbio and mass absorption efficiency of BrCWS and BrCMS at 365 nm with the higher slope for BrCMS suggests BB derived water-insoluble BrC was more absorbing. Relative radiative forcing (RRF, 300 to 2500 nm) of BrCWS and BrCMS with respect to EC were 11 ± 5 % and 23 ± 16 %, respectively. Further, the RRF of BrCMS was up to 60 %, and that of BrCWS was up to 22 % with respect to EC for the samples with fbio ≥ 0.85 (i.e., dominated by BB), reflecting the importance of BB in BrC RRF estimation.

Development of Niosomal Vesicles Loaded Mometasone Furoate Gel for Transdermal Delivery and its Evaluation.

BACKGROUND: Mometasone Furoate (MF) is a corticosteroid (glucocorticoid) used to treat eczema, psoriasis, allergies, and rash on the skin; also used to reduce itching, redness, and swelling (inflammation). It has been reported that the bioavailability of MF is less than 11% when given via the nasal route. Encapsulating the drug in niosomes can improve the active pharmaceutical ingredient's bioavailability by enhancing both physical and biological stability. OBJECTIVE: The goal of the study is to develop, a non-ionic surfactant-based vesicular system, by loading mometasone furoate, and introducing it into a gel-based formulation by utilizing an appropriate gelling agent, and performing its evaluation. METHODS: The niosome vesicle was prepared by vacuum rotary evaporation method (Thin film hydration method). Gel was prepared using the dispersion method and in-vitro drug diffusion studies using Franz-diffusion cells. RESULTS: According to the results of the experiments conducted for the study, Mometasone Furoate niosomal gel was prepared utilizing Mometasone Furoate niosomes that were made using the thin film hydration process, Cholesterol, and Span 60, and loaded in various amounts of Carbopol as a geling agent. The niosomes' zeta potential was found to be -24 mV, showing that the formulation is stable. The polydispersity index (PDI) was found to be 0.409 and the average size of niosomes to be 252.7 nm. The performance of the gel of the optimized formulations containing 2% Carbopol showed in vitro diffusion for 7 hours and an increased flux rate as compared to the plain MF. CONCLUSION: The experiments carried out during the study led to the conclusion that the thin-film hydration method was suitable for the formation of the MF-niosomes by using Span 60 and Cholesterol (2:1). The gel formulation containing 2% Carbopol indicated better in vitro diffusion following the Higuchi model across all niosomal gel formulations. Niosomal gel can be regarded as the best vesicular carrier for the efficient distribution of mometasone furoate via the transdermal route.

Inter-observer agreement among specialists in the diagnosis of oral potentially malignant disorders and oral cancer using store-and-forward technology.

OBJECTIVES: Oral cancer is a leading cause of morbidity and mortality. Screening and mobile Health (mHealth)-based approach facilitates early detection remotely in a resource-limited settings. Recent advances in eHealth technology have enabled remote monitoring and triage to detect oral cancer in its early stages. Although studies have been conducted to evaluate the diagnostic efficacy of remote specialists, to our knowledge, no studies have been conducted to evaluate the consistency of remote specialists. The aim of this study was to evaluate interobserver agreement between specialists through telemedicine systems in real-world settings using store-and-forward technology. MATERIALS AND METHODS: The two remote specialists independently diagnosed clinical images (n=822) from image archives. The onsite specialist diagnosed the same participants using conventional visual examination, which was tabulated. The diagnostic accuracy of two remote specialists was compared with that of the onsite specialist. Images that were confirmed histopathologically were compared with the onsite diagnoses and the two remote specialists. RESULTS: There was moderate agreement (k= 0.682) between two remote specialists and (k= 0.629) between the onsite specialist and two remote specialists in the diagnosis of oral lesions. The sensitivity and specificity of remote specialist 1 were 92.7% and 83.3%, respectively, and those of remote specialist 2 were 95.8% and 60%, respectively, each compared with histopathology. CONCLUSION: The diagnostic accuracy of the two remote specialists was optimal, suggesting that "store and forward" technology and telehealth can be an effective tool for triage and monitoring of patients. CLINICAL RELEVANCE: Telemedicine is a good tool for triage and enables faster patient care in real-world settings.

Formulation Of Benzoyl Peroxide Microsponge-Based Transdermal Gel For Acne Infection And Its Evaluation.

BACKGROUND: Benzoyl peroxide is a peroxide with antibacterial, irritating, keratolytic, comedolytic, and anti-inflammatory properties. When benzoyl peroxide is applied topically, it breaks down and releases oxygen, which kills the germs of Propionibacterium acnes. Benzoyl peroxide's irritating impact causes an increase in epithelial cell turnover, which causes the skin to peel and aids in the healing of comedones. Treatment for acne vulgaris involves the use of benzoyl peroxide. OBJECTIVE: The research is aimed at studying the formulation of Microsponge gel preparation of benzoyl peroxide by using Carbopol 934 as a gelling agent and evaluation of microsponge gel formulation for its physicochemical properties. METHODS: Microsponges of Anti-acne agent benzoyl peroxide drug were prepared by quasi-emulsion method, and in-vitro drug release using a suitable membrane model using a simple diffusion cell. RESULT: Prior to drying, the microsponge was filtered and rinsed using distilled water. Formulation containing benzoyl peroxide and Eudragit RS100 with a ratio of 1:4 showed a high 87.5% drug content and 78.20 % yield. The drug content of the microsponge gel was found to be 84%. Microbiological study on S. aureus was conducted by the cylinder cup method and found good results. The in-vitro diffusion of microsponge formulations was sustained for 8 hours. The drug release rate for Eudragit RS-100 was reported to be 88.87% after 8 hours based on the polymer: drug ratio (4:1). CONCLUSION: The quasi-emulsion solvent diffusion method was used to successfully prepare benzoyl peroxide microsponges using Eudragit RS100, Ethyl Cellulose, and HPMC K4M as polymers. The formulations with the highest medication concentration were made with the porous polymer Eudragit RS100.

Inter-observer agreement among specialists in the diagnosis of Oral Potentially Malignant Disorders and Oral Cancer using Store-and-Forward technology.

Oral Cancer is one of the most common causes of morbidity and mortality. Screening and mobile Health (mHealth) based approach facilitates remote early detection of Oral cancer in a resource-constrained settings. The emerging eHealth technology has aided specialist reach to rural areas enabling remote monitoring and triaging to downstage Oral cancer. Though the diagnostic accuracy of the remote specialist has been evaluated, there are no studies evaluating the consistency among the remote specialists, to the best of our knowledge. The purpose of the study was to evaluate the interobserver agreement between the specialists through telemedicine systems in real-world settings using store and forward technology. Two remote specialists independently diagnosed the clinical images from image repositories, and the diagnostic accuracy was compared with onsite specialist and histopathological diagnosis when available. Moderate agreement (k = 0.682) between two remote specialists and (k = 0.629) between the onsite specialist and two remote specialists in diagnosing oral lesions. The sensitivity and specificity of remote specialist 1 were 92.7% and 83.3%, whereas remote specialist 2 was 95.8% and 60%, respectively, compared to histopathology. The store and forward technology and telecare can be effective tools in triaging and surveillance of patients.

Characterization of paddy-residue burning derived carbonaceous aerosols using dual carbon isotopes.

A large scale paddy-residue burning (PRB) happens every year in the northwest Indo-Gangetic Plain (IGP) during the post-monsoon season, and winds transport pollutants from the source region up to the northern Indian Ocean affecting air quality of the IGP and marine region. In this study, day-night pairs of fine aerosol samples (n = 69) were collected during October-November over Patiala (30.2°N, 76.3°E, 250 m amsl), a site located in the source region of PRB. Carbonaceous aerosols (CA) were characterised using chemical species and dual carbon isotopes (13C and 14C) to estimate bio vs non-bio contributions and understand their characteristics. Percentage of bio fraction (fbio, estimated using 14C) in CA varied from 74 % to 87 % (avg: 80 ± 3) during days and 71 % to 96 % (avg: 85 ± 7 %) during nights. Further, the fbio was found to be better correlated with aerosol mass spectrometer derived f60 compare to levoglucosan (LG) or nssK+, suggesting f60 a useful proxy for PRB. The δ13C varied from -27.7 ‰ to -26.0 ‰ (avg: -27.0 ± 0.4 ‰) and - 28.7 ‰ to -26.4 ‰ (avg: -27.5 ± 0.7 ‰) during day and night, respectively. Measured δ13C of the samples was found to be more enriched than expected by 0.3 to 2.0 ‰, indicating the presence of aged CA also in Patiala even during PRB period. From fbio versus δ13C correlation, and from Miller-Trans plot, δ13C of PRB is found to be -28.9 ± 1.1 ‰, which also infers that Miller-Trans plot can be used to understand source isotopic signature in the absence of radiocarbon measurements in aerosols. Further, the characteristics ratios of organic carbon (OC) to elemental carbon (EC) (11.9 ± 4.1), LG to potassium (K+) (0.84 ± 0.15), OC/LG (19.7 ± 2.0) and K+/EC (0.75 ± 0.27) were calculated by considering samples with fbio higher than 0.90, which can be used for source apportionment studies. Such studies are crucial in assessing the effects of PRB on regional air quality and climate.

Isolated Infratemporal Fossa Desmoid Fibromatosis: A Rare Case Report and Review of Literature.

Desmoid fibromatosis (DF) arising from musculoaponeurotic structures rarely affects the head and neck region with the abdomen being the most common site of origin. These are benign tumors with locally infiltrative nature usually presenting as painless swellings that are rapidly growing. The infratemporal fossa DF is an extremely rare location with few clinical reports. This article discusses the management of a 2-year-old child with DF of the infratemporal fossa (ITF) along with literature review.

Radiomorphometric Indices and their Relation to Alveolar Bone Loss: A Panoramic Radiographic Study.

Aim: To assess the influence of gender and age on different parameters of alveolar bone loss using specific radiomorphometric indices on panoramic radiographs to aid in identifying patients with possible low bone mineral density (BMD). Materials and Methods: The present cross-sectional study included 80 subjects in whom mandibular cortical index (MCI), mandibular cortical width (MCW), panoramic mandibular index (PMI), alveolar bone loss (ABL), and bone height in 1st premolar (Hp) and 1st molar (Hm) were assessed to evaluate the alveolar bone loss. Results: The findings of the present study revealed a significant association between MCI and age for females with C2 and C3 categories being more common with advancing age. Also, a significant difference could be seen in relation to gender (p-value = 0.0315) for MCW with a concomitant decrease in values of MCW in females >60 years of age. The vertical bone height of the edentulous mandible at 1st premolar (Hp) (p-value = 0.0071) and 1st molar (Hm) (p-value = 0.0044) regions were also found to be more in males than females. Conclusion: Panoramic radiographic measurements provided valuable information for alveolar bone loss in terms of gender and age based on specific radiomorphometric parameters.

Efficiency-Enhanced Scalable Organic Photovoltaics Using Roll-to-Roll Nanoimprint Lithography.

Invited for this month's cover is the group of Prof. Morten Madsen, University of Southern Denmark, together with Stensborg A/S and Dr. Shalev's group at the Ben-Gurion University of the Negev. The image shows the integration of Roll-to-Roll (R2R) light-management foils to enhance efficiency of R2R organic photovoltaics. The Full Paper itself is available at 10.1002/cssc.202101611.

Efficiency-Enhanced Scalable Organic Photovoltaics Using Roll-to-Roll Nanoimprint Lithography.

Light-trapping nanostructures have for decades been researched as a route to enhance the performance of organic solar cells (OSCs). Whereas the power conversion efficiencies (PCEs) of OSCs have reached above 18 %, industrially compatible devices made by scalable processing in air, using only nontoxic solvents and materials, have shown significantly lower performance values. Although light-trapping nanostructures may improve this, the methods for integrating the nanostructures are typically not compatible with industrial scale up. In this work, scalable, industrially compatible, nonfullerene-based OSCs are developed with integrated light-trapping nanostructures at the back electrodes in the devices. The OSCs are made by using scalable roll-to-roll (R2R) and sheet-to-sheet (S2S) processes and the nanostructures are made by using roll-to-plate (R2P) nanoimprint lithography. A fully scalable solution is thereby developed for industrially compatible nanostructured OSCs. The nanostructured devices show enhancements in PCE up to 25 % compared to reference cells, owing to an enhancement in the short-circuit current density (15 %) by enhanced absorption, and improved charge carrier extraction leading to an enhancement in the fill factor (7 %). Optical modeling is utilized to verify the optical effect of the nanostructures. The best devices attain a PCE of 6.5 %, which is the highest reported efficiency for air-processed slot-die coated ITO-free flexible PBDB-T : ITIC devices, here using nontoxic solvents.

Initiation of Long-Acting Opioids Following Hospital Discharge Among Medicare Beneficiaries.

Guidelines recommend against initiating long-acting opioids during acute hospitalization, owing to higher risk of overdose and morbidity compared to short-acting opioid initiation. We investigated the incidence of long-acting opioid initiation following hospitalization in a retrospective cohort of Medicare beneficiaries with an acute care hospitalization in 2016 who were ≥65 years old, did not have cancer or hospice care, and had not filled an opioid prescription within the preceding 90 days. Among 258,193 hospitalizations, 47,945 (18.6%) were associated with a claim for a new opioid prescription in the week after hospital discharge: 817 (0.3%) with both short- and long-acting opioids, 125 (0.1%) with long-acting opioids only, and 47,003 (18.2%) with short-acting opioids only. Most long-acting opioid claims occurred in surgical patients (770 out of 942; 81.7%). Compared with beneficiaries prescribed short-acting opioids only, beneficiaries prescribed long-acting opioids were younger, had a higher prevalence of diseases of the musculoskeletal system and connective tissue, and had more known risk factors for opioid-related adverse events, including anxiety disorders, opioid use disorder, prior long-term high-dose opioid use, and benzodiazepine co-prescription. These findings may help target quality-improvement initiatives.

Central retinal artery occlusion after Descemet membrane reposition by intracameral air: A case report.

PURPOSE: To report a case of central retinal artery occlusion after Descemet membrane reposition by intracameral air. METHODS: An otherwise healthy 60-year-old woman presented with white mature cataract in her left eye. Ocular exam of both eyes was within normal limits. After an uneventful topical phacoemulsification, a moderate-grade striate keratopathy and non-planar Descemet membrane detachment was noted on first postoperative day, which was confirmed on anterior segment optical coherence tomography. The Descemet membrane was repositioned within 24 h of cataract extraction by intracameral air tamponade (pneumatic descematopexy) under topical anesthesia, and partial air release was done after 2 h. The patient was evaluated for decreased immediate postoperative vision of perception of light. RESULTS: After pneumatic descematopexy, the stromal edema relatively cleared. The intraocular pressure before releasing the intracameral air was 38 mmHg and antiglaucoma medication was started. Dilated fundus exam showed retinal pallor and a cherry-red spot over the macula. A diagnosis of central retinal artery occlusion was confirmed, and thorough systemic workup was done. Systemic investigations were within normal limits. The patient was managed conservatively, but the final visual acuity remained at 1/60. CONCLUSION: Central retinal artery occlusion is not a reported complication after pneumatic descematopexy for Descemet membrane detachment management. The possible mechanism could be sudden increase in intraocular pressure due to pupil block by air, and thus, ocular surgeries with use of intracameral air for prolonged duration warrants close monitoring of intraocular pressure and its subsequent management.

Value-Based Health Care in Undergraduate Medical Education.

PROBLEM: Value-based health care (VBHC) is an innovative framework for redesigning care delivery to achieve better outcomes for patients and reduce cost; however, providing students with the skills to understand and engage with these topics is a challenge to medical educators. APPROACH: Here, the authors present a novel, VBHC curriculum integrated into a required course for post-core clerkship students-launched in 2018 at Harvard Medical School and taught in conjunction with Harvard Business School faculty-that highlights key principles of VBHC most relevant to undergraduate medical education. The course integrates VBHC with related health disciplines, including health policy, ethics, epidemiology, and social medicine, using a case-based method. Students practice active decision making while learning key concepts to address value in clinical practice. OUTCOMES: Since the course's inception in March 2018, 95 students (87%) completed the standardized course evaluation; the majority said VBHC content and pedagogical style (i.e., case-based learning) enhanced their learning. Students' critiques focused on too little integration with other disciplines (e.g., social medicine, ethics), the physical space, and inadequate time for debates about potential tensions between VBHC and other course disciplines. NEXT STEPS: The authors believe that by exposing medical students to the principles of VBHC, students will fulfill the expectations of graduating physicians by excelling as critical thinkers, collaborative team members, and judicious care providers throughout their residency, clinical practice, and beyond. Future VBHC curricula expansions may include elective coursework, intensive seminar series, and formal dual degrees.

Inverted organic solar cells with non-clustering bathocuproine (BCP) cathode interlayers obtained by fullerene doping.

Bathocuproine (BCP) is a well-studied cathode interlayer in organic photovoltaic (OPV) devices, where it for standard device configurations has demonstrated improved electron extraction as well as exciton blocking properties, leading to high device efficiencies. For inverted devices, however, BCP interlayers has shown to lead to device failure, mainly due to the clustering of BCP molecules on indium tin oxide (ITO) surfaces, which is a significant problem during scale-up of the OPV devices. In this work, we introduce C70 doped BCP thin films as cathode interlayers in inverted OPV devices. We demonstrate that the interlayer forms smooth films on ITO surfaces, resulting from the introduction of C70 molecules into the BCP film, and that these films possess both improved electron extraction as well exciton blocking properties, as evidenced by electron-only devices and photoluminescence studies, respectively. Importantly, the improved cathode interlayers leads to well-functioning large area (100 mm2) devices, showing a device yield of 100%. This is in strong contrast to inverted devices based on pure BCP layers. These results are founded by the effective suppression of BCP clustering from C70, along with the electron transport and exciton blocking properties of the two materials, which thus presents a route for its integration as an interlayer material towards up-scaled inverted OPV devices.

Degradation pathways in standard and inverted DBP-C70 based organic solar cells.

Achieving long-term stability in organic solar cells is a remaining bottleneck for the commercialization of this otherwise highly appealing technology. In this work, we study the performance and stability differences in standard and inverted DBP/C70 based organic solar cells. Differences in the charge-transfer state properties of inverted and standard configuration DBP/C70 solar cells are revealed by sensitive external quantum efficiency measurements, leading to differences in the open-circuit voltages of the devices. The degradation of standard and inverted solar cell configurations at ISOS aging test conditions (ISOS-D-3 and ISOS-T-3) was investigated and compared. The results indicate that the performance drop in the small molecule bilayer solar cells is less related to changes at the D-A interface, suggesting also a pronounced morphological stability, and instead, in the case of inverted cells, dominated by degradation at the electron transport layer (ETL) bathocuproine (BCP). Photoluminescence measurements, electron-only-device characteristics, and stability measurements show improved exciton blocking, electron transport properties and a higher stability for BCP/Ag ETL stacks, giving rise to inverted devices with enhanced performance and device stability.

Design and Development of Novel 2-(Morpholinyl)-N-substituted Phenylquinazolin-4-amines as Selective COX-II Inhibitor.

BACKGROUND: A novel series of 2-(Morpholin-4-yl)-N-phenylquinazolin-4- amine derivatives were synthesized and confirmed with spectral and elemental techniques. METHODS: The compounds were tested for analgesic and anti-inflammatory activity by various pain models in rodents whereas the selectivity towards COX-2 receptor is determined by in vitro assay. RESULTS: Screening results of compounds exhibited comparable biological activity with that of standard compound Indomethacin used for study. Compound 5d was found to be significantly potent with respect to its anti-inflammatory and analgesic activity with substantial COX-II selectivity. CONCLUSION: In silico analysis by molecular docking and 3D-QSAR studies justifies activity profile of compound 5d, suggesting that it may have potential for further evaluation and development as lead molecule for therapy in pain management.

Area dependent behavior of bathocuproine (BCP) as cathode interfacial layers in organic photovoltaic cells.

Standard and inverted configuration small molecule OPV cells incorporating bathocuproine (BCP) as electron transport and exciton blocking layer is investigated, demonstrating that 2 mm2 standard and inverted cells display a maximum performance for BCP thicknesses of 10 nm and 1.5 nm, respectively. The reason for the different optimum BCP thicknesses for the two device configurations is the BCP-metal complex formed between the Ag electrode and the BCP layer in the standard configuration OPV devices. Interestingly, at optimum BCP thicknesses, the inverted OPV cells outperform the standard devices. Upon up-scaling of the device area of the cells from 2 mm2 to 10 and 100 mm2, device failure becomes prominent for the inverted OPV cells, due to aggregation of the evaporated BCP layer on the ITO surface. This demonstrates that although BCP can be adopted for efficient ETL in inverted configuration OPV devices on small scale, it is not suitable for device up-scaling due to severely decreasing device yields. In this work, a possible solution where an ultrathin layer of C70 is evaporated between the ITO and BCP layer is proposed. It is demonstrated that the proposed solution holds a strong potential to minimize the device failures of the BCP based inverted OPV cells to a significant extent, while maintaining good device performances.