Selective Hydrogenation of Aldehydes Using a Well-Defined Fe(II) PNP Pincer Complex in Biphasic Medium.

A biphasic process for the hydrogenation of aldehydes was developed using a well-defined iron (II) PNP pincer complex as model system to investigate the performance of various ionic liquids. A number of suitable hydrophobic ionic liquids based on the N(Tf)2 - anion were identified, allowing to immobilize the iron (II) catalyst in the ionic liquid layer and to facilitate the separation of the desired alcohols. Further studies showed that targeted Brønsted basic ionic liquids can eliminate the need of an external base to activate the catalyst.

Valorization of olive tree leaves: Extraction of oleanolic acid using aqueous solutions of surface-active ionic liquids.

The global olive oil industry annually generates approximately 750,000-1,500,000 tons of Olea europaea leaves as waste that are typically burned for energy production. Yet, this agricultural by-product is a rich source of oleanolic acid, a high value triterpenic acid with outstanding pharmaceutical and nutraceutical activities. The present study focuses on the extraction of oleanolic acid from dried O. europaea leaves using aqueous solutions of surface-active ionic liquids as alternative solvents. A number of imidazolium-based ionic liquids with variable chain length, different anions and optional side-chain functionalization was synthesized and employed in the extraction of oleanolic acid. Ionic liquids with long alkyl chains remarkably enhance the solubility of oleanolic acid in water, thus being able to compete with the solubilities afforded by molecular organic solvents, such as chloroform. Consequently, they are suitable alternatives for the solid-liquid extraction of triterpenic acids from natural matrices and provide improved extraction yields of up to 2.5 wt% oleanolic acid extracted from olive tree leaves.

Hydration and Counterion Binding of [C12MIM] Micelles.

Surface-active ionic liquids based on imidazolium cations are promising targets for micellar catalysis in aqueous solution, yielding enhanced rate constants compared to surfactants based on n-alkyltrimethylammonium cations and exhibiting a pronounced counterion dependence ( Bica Chem. Commun. 2012 , 48 , 5013 - 5015 ; Cognigni Phys. Chem. Chem. Phys. 2016 , 18 , 13375 - 13384 ). Probably most relevant to these effects is the interplay between headgroup hydration and counterion binding. To obtain more detailed information on these effects, aqueous solutions of 1-dodecyl-3-methylimidazolium ([C12MIM]) bromide, iodide, and triflate (TfO-) were investigated at 45 °C using broadband dielectric spectroscopy, viscosity measurements, and small-angle X-ray scattering experiments. Effective hydration numbers were determined, and information on the locations and mobilities of the condensed counterions, X-, was derived. It was found that [C12MIM] halide micelles were less hydrated than the corresponding n-dodecyltrimethylammonium ([C12TA]X) aggregates. Together with their somewhat weaker counterion condensation, this difference probably explains their higher catalytic activity. Whereas [C12MIM]Br micelles remained roughly spherical in the studied concentration range, rodlike aggregates were formed at high concentrations of the iodide and, in particular, the triflate surfactants. It appears that the much lower mobility of condensed TfO- counterions is the reason for the very low catalytic activity of [C12MIM]TfO micelles.

Computational analysis of the solvation of coffee ingredients in aqueous ionic liquid mixtures.

In this paper, we investigate the solvation of coffee ingredients including caffeine, gallic acid as representative for phenolic compounds and quercetin as representative for flavonoids in aqueous mixtures of the ionic liquid 1-ethyl-3-methylimidazolium acetate [C2mim][OAc] at various concentrations. Due to the anisotropy of the solutes we show that classical Kirkwood-Buff theory is not appropriate to study solvation effects with increasing ionic liquid content. However, excess coordination numbers as well as the mean residence time of solvent molecules at the surface of the solutes can be determined by Voronoi tessellation. Since the volume of the hydration shells is also available by this method, solvation free energies will be discussed as a function of the ionic liquid concentration to yield a physical meaningful picture of solvation for the anisotropic solutes. Hydrogen bonding capabilities of the solutes and their relevance for experimental extraction yields from spent coffee grounds are also discussed.

Surface-active ionic liquids in catalysis: Impact of structure and concentration on the aerobic oxidation of octanol in water.

We present design and synthesis of surface-active ionic liquids for the application in micellar catalysis. A series of 1-methyl-3-dodecylimidazolium based ionic liquids with variable core structures including dicationic and zwitterionic ones was synthesized and characterized. These surface-active ionic liquids where applied in the aerobic oxidation of aliphatic alcohols to carbonyl compounds. A strong dependence on the ionic liquid concentration and structure was identified, which is in accordance with the concepts of micellar catalysis. Optimum conditions for the oxidation of 1-octanol could be identified, and the use of surface-active ionic liquids strongly improved the reaction performance compared to pure water. Under optimized conditions, it was possible to isolate up to 75% of octanoic acid using only small amounts of surface-active ionic liquid in a 0.05mM solution in water without further ligands.

Fluorine-free, liquid-repellent surfaces made from ionic liquid-infused nanostructured silicon.

ABSTRACT: Liquid-repellent surfaces based on slippery liquid-infused porous substrates (SLIPS) were prepared from porous, nanostructured silicon surfaces with different surface functionalization, infused with the polar ionic liquid 1-ethyl-3-methylimidazolium methylsulfate ([C2mim]MeSO4). Contrary to nonpolar SLIPS based on perfluorinated substrates and infusion liquids, [C2mim]MeSO4 forms stable SLIPS with high energy surfaces like native silicon (Si-SiO2) or ionic liquid-functionalized silicon (Si-[C3mim]Cl), whose liquid-repellent properties against low surface tension liquids (toluene, cyclohexane) were demonstrated by very low sliding angles (α < 3°) and low contact angle hysteresis (Δθ < 10°). These polar, ionic liquid-based SLIPS present a promising, environmentally benign extension of liquid-infused substrates to natural, high-energy oxide surfaces.

Acyclovir as an Ionic Liquid Cation or Anion Can Improve Aqueous Solubility.

Six ionic liquid (IL)-forming ions (choline, tetrabutylphosphonium, tetrabutylammonium, and trimethylhexadecylammonium cations, and chloride and docusate anions) were paired with acyclovir as the counterion to form four low melting solid salts and two waxes; five of these compounds could be classified as ILs. All of the newly synthesized acyclovir ILs exhibited increased aqueous solubilities by at least 2 orders of magnitude when compared to that of neutral acyclovir. For three of the prepared compounds, the solubilities in simulated body fluids (phosphate-buffered saline, simulated gastric, and simulated intestinal fluids) were also greatly enhanced when compared to that of neutral acyclovir. Acyclovir in its anionic form was more water- or buffer-soluble than acyclovir in its cationic form, though this might be the effect of the particular ions, indicating that the solubilities can be finely tuned by proper choice of the cationic or anionic form of acyclovir and the counterion paired with it.

Surface-active ionic liquids for palladium-catalysed cross coupling in water: effect of ionic liquid concentration on the catalytically active species.

We report the design and synthesis of surface-active ionic liquids for application in palladium-catalyzed cross coupling reactions. A series of dodecylimidazolium-based ionic liquids were applied as additives in the Heck reaction of ethyl acrylate and iodobenzene, and high yields of >90% could be obtained in water without the addition of further ligands. Our results indicate that the ionic liquid concentration in water is the key factor affecting the formation of the catalytically active species and hence the yield. Moreover, imidazolium-based ionic liquids that are able to form a carbene species differ significantly from conventional cationic surfactants, as a concentration dependent formation of the N-heterocyclic carbene complex was observed.

Ionic Liquid-Based Microemulsions in Catalysis.

The design and properties of surface-active ionic liquids that are able to form stable microemulsions with heptane and water are presented, and their promise as reaction media for thermomorphic palladium-catalyzed cross-coupling reactions is demonstrated.

Surface-active ionic liquids in micellar catalysis: impact of anion selection on reaction rates in nucleophilic substitutions.

A series of surface-active ionic liquids based on the 1-dodecyl-3-methylimidazolium cation and different anions such as halides and alkylsulfates was synthesized. The aggregation behavior of these ionic liquids in water was characterized by surface tension, conductivity measurements and UV-Vis spectroscopy in order to determine the critical micelle concentration (CMC) and to provide aggregation parameters. The determination of surface activity and aggregation properties of amphiphilic ionic liquids was accompanied by SAXS studies on selected surface-active ionic liquids. The application of these surface-active ionic liquids with different anions was tested in nucleophilic substitution reactions for the degradation of organophosphorus compounds. Kinetic studies via UV-Vis spectrophotometry showed a strong acceleration of the reaction in the micellar system compared to pure water. In addition, an influence of the anion was observed, resulting in a correlation between the anion binding to the micelle and the reaction rate constants, indicating that the careful choice of the surface-active ionic liquid can considerably affect the outcome of reactions.

Automated evaluation of protein binding affinity of anti-inflammatory choline based ionic liquids.

In this work, an automated system for the study of the interaction of drugs with human serum albumin (HSA) was developed. The methodology was based on the quenching of the intrinsic fluorescence of HSA by binding of the drug to one of its binding sites. The fluorescence quenching assay was implemented in a sequential injection analysis (SIA) system and the optimized assay was applied to ionic liquids based on the association of non-steroidal anti-inflammatory drugs with choline (IL-API). In each cycle, 100 µL of HSA and 100 µL of IL-API (variable concentration) were aspirated at a flow rate of 1 mL min(-1) and then sent through the reaction coil to the detector where the fluorescence intensity was measured. In the optimized conditions the effect of increasing concentrations of choline ketoprofenate and choline naproxenate (and respective starting materials: ketoprofen and naproxen) on the intrinsic fluorescence of HSA was studied and the dissociation constants (Kd) were calculated by means of models of drug-protein binding in the equilibrium. The calculated Kd showed that all the compounds bind strongly to HSA (Kd<100 µmol L(-1)) and that the use of the drugs in the IL format does not affect or can even improve their HSA binding. The obtained results were compared with those provided by a conventional batch assay and the relative errors were lower than 4.5%. The developed SIA methodology showed to be robust and exhibited good repeatability in all the assay conditions (rsd<6.5%).

Coordinating Chiral Ionic Liquids: Design, Synthesis, and Application in Asymmetric Transfer Hydrogenation under Aqueous Conditions.

Hydrophilic coordinating chiral ionic liquids with an amino alcohol substructure were developed and efficiently applied to the asymmetric reduction of ketones. Their careful design and adaptability to the desired reaction conditions allow for these chiral ionic liquids to be used as the sole source of chirality in a ruthenium-catalyzed transfer hydrogenation reaction of aromatic ketones. When used in this reaction system, these chiral ionic liquids afforded excellent yields and high enantioselectivities.

Direct extraction of genomic DNA from maize with aqueous ionic liquid buffer systems for applications in genetically modified organisms analysis.

To date, the extraction of genomic DNA is considered a bottleneck in the process of genetically modified organisms (GMOs) detection. Conventional DNA isolation methods are associated with long extraction times and multiple pipetting and centrifugation steps, which makes the entire procedure not only tedious and complicated but also prone to sample cross-contamination. In recent times, ionic liquids have emerged as innovative solvents for biomass processing, due to their outstanding properties for dissolution of biomass and biopolymers. In this study, a novel, easily applicable, and time-efficient method for the direct extraction of genomic DNA from biomass based on aqueous-ionic liquid solutions was developed. The straightforward protocol relies on extraction of maize in a 10 % solution of ionic liquids in aqueous phosphate buffer for 5 min at room temperature, followed by a denaturation step at 95 °C for 10 min and a simple filtration to remove residual biopolymers. A set of 22 ionic liquids was tested in a buffer system and 1-ethyl-3-methylimidazolium dimethylphosphate, as well as the environmentally benign choline formate, were identified as ideal candidates. With this strategy, the quality of the genomic DNA extracted was significantly improved and the extraction protocol was notably simplified compared with a well-established method.

Automated evaluation of pharmaceutically active ionic liquids' (eco)toxicity through the inhibition of human carboxylesterase and Vibrio fischeri.

The toxicity of 16 pharmaceutical active ionic liquids (IL-APIs) was evaluated by automated approaches based on sequential injection analysis (SIA). The implemented bioassays were centered on the inhibition of human carboxylesterase 2 and Vibrio fischeri, in the presence of the tested compounds. The inhibitory effects were quantified by calculating the inhibitor concentration required to cause 50% of inhibition (EC50). The EC50 values demonstrated that the cetylpyridinium group was one of the most toxic cations and that the imidazolium group was the less toxic. The obtained results provide important information about the safety of the studied IL-APIs and their possible use as pharmaceutical drugs. The developed automated SIA methodologies are robust screening bioassays, and can be used as a generic tools to identify the (eco)toxicity of the structural elements of ILs, contributing to a sustainable development of drugs.

Coordinating chiral ionic liquids.

A practical synthesis of novel coordinating chiral ionic liquids with an amino alcohol structural motif was developed starting from commercially available amino alcohols. These basic chiral ionic liquids could be successfully applied as catalysts in the asymmetric alkylation of aldehydes and gave high enantioselectivities of up to 91% ee.

Polarisabilities of alkylimidazolium ionic liquids.

The molar polarisability and molar volume for 71 ionic liquids were extracted from 157 measurements of their refractive index and density, which were then further deconstructed into atomic contributions by means of a Designed Regression analysis. Using this approach, the density and refractive index for any chosen ionic liquid with alkyl-substituted imidazolium cations can be predicted in good agreement with experimental data.

Pharmaceutically active ionic liquids with solids handling, enhanced thermal stability, and fast release.

Pharmaceutically active compounds in ionic liquid form immobilized onto mesoporous silica are stable, easily handled solids, with fast and complete release from the carrier material when placed into an aqueous environment. Depending on specific ion-surface interactions, they may also exhibit improved thermal stability when compared to the non-adsorbed compounds.

Micellar catalysis in aqueous-ionic liquid systems.

We present the application of ionic liquid-aqueous micellar solutions as reaction media for Diels-Alder reaction and found that reaction rates could be significantly increased compared to the reaction in water.

Liquid forms of pharmaceutical co-crystals: exploring the boundaries of salt formation.

We present evidence of hydrogen bond formation, not salt formation, as the driving force in the liquefaction of a solid pharmaceutical in the form of a neutral acid-base complex, as exemplified by the liquid formed from a mixture of the local anesthetic lidocaine with fatty acids; these complexes exist at the boundary between simple eutectics and partially ionised ionic liquids.

Confused ionic liquid ions--a "liquification" and dosage strategy for pharmaceutically active salts.

We present a strategy to expand the liquid and compositional ranges of ionic liquids, specifically pharmaceutically active ionic liquids, by simple mixing with a solid acid or base to form oligomeric ions.