ABSTRACT
Membranes with antibacterial properties were developed using surface modification of polyethersulfone ultrafiltration membranes. Three different modification strategies using polyelectrolyte layer-by-layer (LbL) technique are described. The first strategy relying on the intrinsic antibacterial properties of poly(diallyldimethylammonium chloride) (PDADMAC) and poly(ethylenimine) (PEI) exhibits only little antibacterial effects. The other two strategies contain silver in both ionic (Ag(+)) and metallic (Ag(0)) form. Ag(+) embedded into negatively charged poly(sodium 4-styrene sulfonate) (PSS) layers totally inhibits bacterial growth. Ag(0) nanoparticles were introduced to the membrane surface by LbL deposition of chitosan- and poly(methacrylic acid) - sodium salt (PMA)-capped silver nanoparticles and subsequent UV or heat treatment. Antibacterial properties of the modified membranes were quantified by a new method based on the Respiration Activity Monitoring System (RAMOS), whereby the oxygen transfer rates (OTR) of E. coli K12 cultures on the membranes were monitored online. As opposed to colony forming counting method RAMOS yields more quantitative and reliable data on the antibacterial effect of membrane modification. Ag-imprinted polyelectrolyte film composed of chitosan (Ag(0))/PMA(Ag(0))/chitosan(Ag(0)) was found to be the most promising among the tested membranes. Further investigation revealed that the concentration and equal distribution of silver in the membrane surface plays an important role in bacterial growth inhibition.
Subject(s)
Anti-Bacterial Agents/chemistry , Biofilms/drug effects , Membranes, Artificial , Polymers/chemistry , Sulfones/chemistry , Ultrafiltration/methods , Water Purification/methods , Biofilms/growth & development , Colony Count, Microbial , Electrolytes/chemistry , Escherichia coli K12 , Hot Temperature , Metal Nanoparticles/chemistry , Microscopy, Electron, Scanning , Oxygen/metabolism , Photoelectron Spectroscopy , Polyethyleneimine/chemistry , Polyethylenes/chemistry , Quaternary Ammonium Compounds/chemistry , Silver/chemistry , Sulfonic Acids/chemistry , Ultraviolet RaysABSTRACT
Microstructured polymeric films are fabricated by a novel replication method. A polymer solution is applied and contained between two substrates, of which at least one is a patterned PDMS mold. The ensemble is then put in an atmosphere containing water vapor, which diffuses through the PDMS. The absorption of water into the polymer solution causes the precipitation (phase separation) of the polymer while in contact with the microstructured molds. The thickness of the PDMS slab can be exploited to tune the water vapor transport and hence the phase separation kinetics and resulting polymer morphology. Removal of excess polymer solution from between two PDMS slabs, followed by vapor induced phase separation, can also result in microperforated polymer films with great control over the dimensions.