Atom Probe Tomography Investigation of Clustering in Model P2O5-Doped Borosilicate Glasses for Nuclear Waste Vitrification.

Atom probe tomography (APT) has been utilized to investigate the microstructure of two model borosilicate glasses designed to understand the solubility limits of phosphorous pentoxide (P2O5). This component is found in certain high-level radioactive defence wastes destined for vitrification, where phase separation can potentially lead to a number of issues relating to the processing of the glass and its long-term chemical and structural stability. The development of suitable focused ion beam (FIB)-preparation routes and APT analysis conditions were initially determined for the model glasses, before examining their detailed microstructures. In a 3.0 mol% P2O5-doped glass, both visual inspection and sensitive statistical analysis of the APT data show homogeneous microstructures, while raising the content to 4.0 mol% initiates the formation of phosphorus-enriched nanoscale precipitates. This study confirms the expected inhomogeneities and phase separation of these glasses and offers routes to characterizing these at near-atomic scale resolution using APT.

Benchtop Zone Refinement of Simulated Future Spent Nuclear Fuel Pyroprocessing Waste.

The UK's adoption of pyroprocessing of spent nuclear fuel as an alternative to the current aqueous processing routes requires a robust scientific underpinning of all relevant processes. One key process is the clean-up of the contaminated salt from the electroreducing and electrorefining processes. A proposed method for this clean-up is zone refining, whereby the tendency of the contaminants to remain in the liquid phase during melting and freezing is exploited to 'sweep' the contaminants to one end of the sample. Experiments were performed, utilising off-the-shelf laboratory equipment, to demonstrate the feasibility of zone refining for clean-up of electroreducing and electrorefining wastes. This was successful for the electrorefining simulant samples, with effective segregation coefficient, keff, values, which provide a measure of the degree of separation in the sample, between 0 and 1. Lower values indicate greater separation, with values of as low as 0.542 achieved here, corresponding to a reduction in RECl3 content from 10.0 wt.% to 8.4 wt.% (for 80% salt reuse). Due to difficulties in obtaining a fully homogeneous electroreducing simulant waste, it was not possible to demonstrate the feasibility of zone refining using the current experimental setup. Further research is required to elucidate the correct preparation conditions for production of homogeneous electroreducing waste simulants.

Antimicrobial Fe2O3-CuO-P2O5 glasses.

Glasses with high antimicrobial efficacy were developed in the Fe2O3-CuO-P2O5 ternary system to mitigate fomite-mediated transmission of infectious diseases in high-risk settings such as hospitals, daycares, and nursing homes. Binary CuO-P2O5 glasses were not durable enough for use as high touch point articles, so Fe2O3 was added to the compositions to increase the chemical durability. The amount of Cu leachate decreased by at least 3 orders of magnitude when Fe2O3 was increased from 0 to 13.1 mol%. At the highest Fe2O3 contents and corresponding highest durability, the glass was no longer able to pass a test of antimicrobial efficacy with < 3 log kill compared to > 5 log kill for all other compositions. Ab-initio molecular dynamics simulations showed increasing bridging oxygen species at the expense of non-bridging oxygen species with the increase in Fe2O3 content, showing that the glasses exhibited increased chemical durability because they were more interconnected and structurally bound. Experimental results with glasses at fixed CuO and decreasing Fe2O3 confirmed that Fe2O3 content (not CuO) controlled the Cu release rate and, thus, the antimicrobial efficacy of the glasses. The significance of the oxidation state of the leached Cu was overwhelmed by the importance of the amount of Cu leachate.

Toward a Unifying Hypothesis for Redesigned Lipid Catabolism as a Clinical Target in Advanced, Treatment-Resistant Carcinomas.

We review extensive progress from the cancer metabolism community in understanding the specific properties of lipid metabolism as it is redesigned in advanced carcinomas. This redesigned lipid metabolism allows affected carcinomas to make enhanced catabolic use of lipids in ways that are regulated by oxygen availability and is implicated as a primary source of resistance to diverse treatment approaches. This oxygen control permits lipid catabolism to be an effective energy/reducing potential source under the relatively hypoxic conditions of the carcinoma microenvironment and to do so without intolerable redox side effects. The resulting robust access to energy and reduced potential apparently allow carcinoma cells to better survive and recover from therapeutic trauma. We surveyed the essential features of this advanced carcinoma-specific lipid catabolism in the context of treatment resistance and explored a provisional unifying hypothesis. This hypothesis is robustly supported by substantial preclinical and clinical evidence. This approach identifies plausible routes to the clinical targeting of many or most sources of carcinoma treatment resistance, including the application of existing FDA-approved agents.

Multiperspective Analysis of Pandemic Impacts on U.S. Import Trade: What Happened, and Why?

U.S. container ports have experienced unpresented congestion since mid-2020. The congestion is generally attributed to import surges triggered by heavy spending on consumer goods during the COVID-19 pandemic. Port congestion has been compounded by the inability of importers to retrieve, receive, and process all the inbound goods they have ordered, resulting in supply chain shortfalls and economic disruption. How can the shipping industry and government organizations predict the end of the current surge and anticipate future surges? Expected seasonal variations in import volume are associated with peak holiday shopping periods; nonseasonal import surges are signaled by other factors. The research goes beyond transportation data sources to examine broader connections between import volume and indicators of economic and retail industry conditions. The strongest and most useful relationship appears to be between retail inventory indicators and containerized import growth. From January 2018 through July 2021, there was a relatively strong negative correlation between retail inventory- and import TEU indices with a 4-month lag (corresponding roughly to the time between import orders and -arrival). In the 2020 to 2021 pandemic period the negative correlation was stronger, again with a 4-month lag. These findings suggest that observers might anticipate import surges after marked, nonseasonal drops in retail inventories, and that import surges are likely to last until target inventory levels are restored. In a broader sense, an awareness of the linkages between consumer demand, retail chain responses, and containerized import volumes could better inform port, freight transportation, and government planning and policy choices.

Effects of iron substitution and anti-site disorder on crystal structures, vibrational, optical and magnetic properties of double perovskites Sr2(Fe1-xNix)TeO6.

The double-perovskite series, Sr2(Fe1-xNix)TeO6 (x = 0, 0.25, 0.50, 0.75, and 1) has been synthesized in polycrystalline form by solid-state reaction at 1300 K in air. Their crystal structures were probed by powder X-ray diffraction at room temperature. Rietveld analysis revealed that all samples crystallize in the monoclinic space group I2/m. The double-perovskite structures ideally contain two alternating types of octahedra (Fe/Ni)2dO6 and (Te)2aO6, tilted in the system (a-a-c0). However, the refinements have shown a complex distribution of all three cations over the two available octahedral sites; 2d (½, ½, 0) and 2a (0, 0, 0). Raman spectroscopy further complements the obtained results, by revealing a tiny increase of the wavenumber of some Raman modes when Fe is substituted by Ni. The optical characteristics of the series were determined by fitting diffuse reflectance UV/Vis spectra enabling the optical band gaps to be derived from Tauc method and derivation of absorption spectra fitting (DASF) techniques. Analyses of the obtained 57Fe Mössbauer hyperfine parameters at room temperature of samples with compositions x = 0, 0.25, 0.50 and 0.75 reveal the presence of Fe3+ in high-spin state with an anti-site disorder of Fe-Ni-Te cations in distorted octahedral environments (site 2d and 2a). The results show that significant correlations exist between the crystal structures and physical properties of double perovskites containing B site transition elements of different charge and size. Temperature-dependent magnetic susceptibility data show magnetic transitions below 40(1) K (38(1) K, 31(1) K, 25(1) K, 20(1) K, and 35(1) K for x = 0, 0.25, 0.50, 0.75, and 1, respectively. A divergence between FC and ZFC curves for all compositions has been observed. The results show that the ground states of the doped materials might be spin glasses or magnetically ordered.

Evidence for a novel, effective approach to targeting carcinoma catabolism exploiting the first-in-class, anti-cancer mitochondrial drug, CPI-613.

Clinical targeting of the altered metabolism of tumor cells has long been considered an attractive hypothetical approach. However, this strategy has yet to perform well clinically. Metabolic redundancy is among the limitations on effectiveness of many approaches, engendering intrinsic single-agent resistance or efficient evolution of such resistance. We describe new studies of the multi-target, tumor-preferential inhibition of the mitochondrial tricarboxylic acid (TCA) cycle by the first-in-class drug CPI-613® (devimistat). By suppressing the TCA hub, indispensable to many metabolic pathways, CPI-613 substantially reduces the effective redundancy of tumor catabolism. This TCA cycle suppression also engenders an apparently homeostatic accelerated, inefficient consumption of nutrient stores in carcinoma cells, eroding some sources of drug resistance. Nonetheless, sufficiently abundant, cell line-specific lipid stores in carcinoma cells are among remaining sources of CPI-613 resistance in vitro and during the in vivo pharmacological drug pulse. Specifically, the fatty acid beta-oxidation step delivers electrons directly to the mitochondrial electron transport system (ETC), by-passing the TCA cycle CPI-613 target and producing drug resistance. Strikingly, tested carcinoma cell lines configure much of this fatty acid flow to initially traverse the peroxisome enroute to additional mitochondrial beta-oxidation. This feature facilitates targeting as clinically practical agents disrupting this flow are available. Two such agents significantly sensitize an otherwise fully CPI-613-resistant carcinoma xenograft in vivo. These and related results are strong empirical support for a potentially general class of strategies for enhanced clinical targeting of carcinoma catabolism.

Elucidating the Mechanistic Origin of a Spin State-Dependent FeNx-C Catalyst toward Organic Contaminant Oxidation via Peroxymonosulfate Activation.

Atomically dispersed metals on nitrogen-doped carbon matrices have attracted extensive interest in the removal of refractory organic pollutants. However, a thorough exploration of the particular structure for each active site and specific effects of these sites still remains elusive. Herein, an Fe-pyridinic N4 structure in a single-atom catalyst (FeNx-C) was constructed using a facile pyrolysis strategy, and it exhibited superior catalytic activity in peroxymonosulfate (PMS) activation toward organic contaminant oxidation. The various Fe species and relative amounts of each Fe site in the FeNx-C catalyst were validated using X-ray absorption spectroscopy and 57Fe Mössbauer spectroscopy, which showed critical dependencies on the precursor ratio and calcination temperature. The positive correlations between relative content of high-spin state species (FeII and FeIII) and catalytic performance were found to determine the reactive species generation and electron transfer pathway in the FeNx-C/PMS system. Moreover, catalytic performance and theoretical calculation results revealed that FeII-N4 in the high-spin state (S = 2) tends to activate PMS to form sulfate and hydroxyl radicals via a one-electron transfer process, while the FeIII-N4 moiety (S = 5/2) is prone to high-valent iron species generation with lower free energy. Benefiting from finely tuned active sites, a single-atom FeNx-C catalyst achieved favorable applicability in actual wastewater treatment with efficient resistance of the common water matrix. The present work advances the mechanistic understanding of spin state-dependent persulfate activation in single-atom catalysts and provides guidance to design a superior catalyst based on spin state descriptions.

Self-Assembly of Nanosheet-Supported Fe-MOF Heterocrystals as a Reusable Catalyst for Boosting Advanced Oxidation Performance via Radical and Nonradical Pathways.

Heterojunction catalysts have drawn increasing interest for the visible light-driven Fenton reaction and bring tremendous opportunities for environmental remediation. Herein, a BiOI/MIL-53(Fe) Z-scheme heterojunction (named BMFe) was synthesized for the first time via a facile strategy. Compared with pristine BiOI and MIL-53(Fe) catalysts, the two-dimensional/three-dimensional (2D/3D) heterojunction catalyst manifested remarkable catalytic performance toward degradation of phenol, bisphenol A, methylene blue, and carbamazepine, which is attributed mainly to the interfacial integration and efficient charge separation. By virtue of coupling at the interface, as confirmed by XPS, 57Fe Mössbauer spectroscopy, and DFT calculations, the BMFe catalyst promoted the transfer of electron-hole pairs via Z-scheme and improved the chemical activation of hydrogen peroxide. The subsequent holes, free radicals, and nonradicals can effectively and continuously decompose pollutants, achieving a positive synergistic effect between photocatalysis and Fenton reactions. Simultaneously, the specially designed BiOX(X = Br, Cl)/MIL-53(Fe) and BiOI/Fe-MOFs(MIL-101, MIL-88) heterojunctions also exhibited advanced oxidative capacity for organic pollutants. Given their practical value for industrial applications, BMFe beads (1.0 ± 0.15 mm) synthesized via a blend cross-linking method can significantly advance long-term stability and recyclability. The integration of Fe-based metal-organic frameworks with bismuth oxyhalide semiconductors provides a new perspective on developing heterojunction catalysts for environmental remediation.

BiOBr/MoS2 catalyst as heterogenous peroxymonosulfate activator toward organic pollutant removal: Energy band alignment and mechanism insight.

Utilization of heterogenous catalysts to trigger peroxymonosulfate (PMS) activation is considered an efficient strategy for environmental decontamination. Herein, a tightly bonded flake-like 2D/2D BiOBr/MoS2 heterojunction was successfully designed through co-precipitation process. By virtue of matched energy levels and intimate interfacial coupling, the Type-II BiOBr/MoS2 heterojunction significantly expedited charge carrier transfer and thereby promoted the catalytic performance for organic dye oxidation and Cr(VI) reduction. The specially designed BiOBr/MoS2 heterojunction is also conducive to split PMS and continuously generated highly active species (SO4-, OH and O2-) in a photo-Fenton system, achieving extraordinary catalytic capacity for various emerging organic pollutants (including phenol, bisphenol A and carbamazepine). The photoexcited electron with prolonged lifetime and exposed Mo sites with multivalence and multiphase nature can effectively activate PMS, which further promotes the oxidation efficiency of holes, as confirmed by scavenging experiments. The excellent stability and oxidative properties could justify scale up using BiOBr/MoS2 to a small pilot test, implementing the potential value in practical applications. This study would provide novel insight and cognition of PMS activation via a superior heterojunction for complex polluted wastewater treatment.

Real-Time Standard Analysis of Disease Investigation (SADI)-A Toolbox Approach to Inform Disease Outbreak Response.

An incursion of an important exotic transboundary animal disease requires a prompt and intensive response. The routine analysis of up-to-date data, as near to real time as possible, is essential for the objective assessment of the patterns of disease spread or effectiveness of control measures and the formulation of alternative control strategies. In this paper, we describe the Standard Analysis of Disease Investigation (SADI), a toolbox for informing disease outbreak response, which was developed as part of New Zealand's biosecurity preparedness. SADI was generically designed on a web-based software platform, Integrated Real-time Information System (IRIS). We demonstrated the use of SADI for a hypothetical foot-and-mouth disease (FMD) outbreak scenario in New Zealand. The data standards were set within SADI, accommodating a single relational database that integrated the national livestock population data, outbreak data, and tracing data. We collected a well-researched, standardised set of 16 epidemiologically relevant analyses for informing the FMD outbreak response, including farm response timelines, interactive outbreak/network maps, stratified epidemic curves, estimated dissemination rates, estimated reproduction numbers, and areal attack rates. The analyses were programmed within SADI to automate the process to generate the reports at a regular interval (daily) using the most up-to-date data. Having SADI prepared in advance and the process streamlined for data collection, analysis and reporting would free a wider group of epidemiologists during an actual disease outbreak from solving data inconsistency among response teams, daily "number crunching," or providing largely retrospective analyses. Instead, the focus could be directed into enhancing data collection strategies, improving data quality, understanding the limitations of the data available, interpreting the set of analyses, and communicating their meaning with response teams, decision makers and public in the context of the epidemic.

An injectable, self-healing and MMP-inhibiting hyaluronic acid gel via iron coordination.

Regulating the activity of matrix metalloproteinases (MMPs) is a potential strategy for osteoarthritis (OA) therapy, although delivering this effect in a spatially and temporally localised fashion remains a challenge. Here, we report an injectable and self-healing hydrogel enabling factor-free MMP regulation and biomechanical competence in situ. The hydrogel is realised within 1 min upon room temperature coordination between hyaluronic acid (HA) and a cell-friendly iron-glutathione complex in aqueous environment. The resultant gel displayed up to 300% in shear strain and tolerance towards ATDC 5 chondrocytes, in line with the elasticity and biocompatibility requirements for connective tissue application. Significantly enhanced inhibition of MMP-13 activity was achieved after 12 h in vitro, compared with a commercial HA injection (OSTENIL® PLUS). Noteworthy, 24-hour incubation of a clinical synovial fluid sample collected from a late-stage OA patient with the reported hydrogel was still shown to downregulate synovial fluid MMP activity (100.0 ± 17.6% ➔ 81.0 ± 7.5%), with at least comparable extent to the case of the OSTENIL® PLUS-treated SF group (100.0 ± 17.6% ➔ 92.3 ± 27.3%). These results therefore open up new possibilities in the use of HA as both mechanically-competent hydrogel as well as a mediator of MMP regulation for OA therapy.

Structure and magnetism of the Rh4+-containing perovskite oxides La0.5Sr0.5Mn0.5Rh0.5O3 and La0.5Sr0.5Fe0.5Rh0.5O3.

Synchrotron X-ray powder diffraction data indicate that La0.5Sr0.5Mn0.5Rh0.5O3 and La0.5Sr0.5Fe0.5Rh0.5O3 adopt distorted perovskite structures (space group Pnma) with A-site and B-site cation disorder. A combination of XPS and 57Fe Mössbauer data indicate the transition metal cations in the two phases adopt Mn3+/Rh4+ and Fe3+/Rh4+ oxidation state combinations respectively. Transport data indicate both phases are insulating, with ρ vs. T dependences consistent with 3D variable-range hopping. Magnetisation data reveal that La0.5Sr0.5Mn0.5Rh0.5O3 adopts a ferromagnetic state below Tc ∼ 60 K, which is rationalized on the basis of coupling via a dynamic Jahn-Teller distortion mechanism. In contrast, magnetic data reveal La0.5Sr0.5Fe0.5Rh0.5O3 undergoes a transition to a spin-glass state at T ∼ 45 K, attributed to frustration between nearest-neighbour Fe-Rh and next-nearest-neighbour Fe-Fe couplings.

The facile and additive-free synthesis of a cell-friendly iron(iii)-glutathione complex.

The straightfoward creation of an unreported glutathione-stabilised iron(iii) complex is disclosed. In contrast to previous reports, glutathione was shown to coordinate and stabilise iron directly under physiological conditions in the absence of additional sulfur containing molecules, such as sodium sulfide. The complex was extensively characterised; the molecular geometry was determined as two inequivalent octahedra, approximately 2/3 of which are slightly distorted towards more tetrahedral in character, with the remaining 1/3 more regularly octahedral. The dispersion of the iron(iii)-glutathione complex in aqueous solution yielded particles of 255 ± 4 nm in diameter that enhanced the growth and proliferation of L929 fibroblast cells over 7 days, and inhibited the activity of matrix metalloproteinase-13. Consequently, the unprecedented glutathione-stabilised iron(iii) complex disclosed has potential use as a simple-to-prepare growth factor for inclusion within cell culture media, and is an excellent candidate as a therapeutic for the treatment of metalloproteinase-13-associated diseases.

Neutron Diffraction and Raman Studies of the Incorporation of Sulfate in Silicate Glasses.

The oxidation state, coordination, and local environment of sulfur in alkali silicate (R2O-SiO2; R = Na, Li) and alkali/alkaline-earth silicate (Na2O-MO-SiO2; M = Ca, Ba) glasses have been investigated using neutron diffraction and Raman spectroscopy. With analyses of both the individual total neutron correlation functions and suitable doped-undoped differences, the S-O bonds and (O-O)S correlations were clearly isolated from the other overlapping correlations due to Si-O and (O-O)Si distances in the SiO4 tetrahedra and the modifier-oxygen (R-O and M-O) distances. Clear evidence was obtained that the sulfur is present as SO4 2- groups, confirmed by the observation in the Raman spectra of the symmetric S-O stretch mode of SO4 2- groups. The modifier-oxygen bond length distributions were deconvoluted from the neutron correlation functions by fitting. The Na-O and Li-O bond length distributions were clearly asymmetric, whereas no evidence was obtained for asymmetry of the Ca-O and Ba-O distributions. A consideration of the bonding shows that the oxygen atoms in the SO4 2- groups do not participate in the silicate network and as such constitute a third type of oxygen, "non-network oxygen", in addition to the bridging and non-bridging oxygens that are bonded to silicon atoms. Thus, each individual sulfate group is surrounded by a shell of modifier and is not connected directly to the silicate network. The addition of SO3 to the glass leads to a conversion of oxygen atoms within the silicate network from non-bridging to bridging so that there is repolymerization of the silicate network. There is evidence that SO3 doping leads to changes in the form of the distribution of Na-O bond lengths with a reduction in the fitted short-bond coordination number and an increase in the fitted long-bond coordination number, and this is consistent with repolymerization of the silicate network. In contrast, there is no evidence that SO3 doping leads to a change in the distribution of Li-O bond lengths with a total Li-O coordination number consistently in excess of 4.

Evaluating the utility of national-scale data to estimate the local risk of foot-and-mouth disease in endemic regions.

Knowledge of the distribution of foot-and-mouth disease (FMD) is required if control programmes are to be successful. However, data on the seroprevalence and incidence of affected villages in developing countries with endemic disease are scarce. This is partly due to resource constraints as well as the logistical challenges of conducting intensive surveys and diagnostic testing in remote locations. In this study, we evaluated the performance of low resolution national-scale data against high resolution local survey data to predict the FMD serological status of 168 villages in the Mandalay and Sagaing Regions of central Myanmar using both logistic regression and random forest modelling approaches. Blood samples for ELISA testing were collected from approximately 30 cattle per village in both the 6 to 18 month age range and in the over 18 month age range to distinguish between recent and historical exposure, respectively. The results of the animal level tests were aggregated to the village level to provide the outcome of interest (village positive or not positive for FMD), and three explanatory data sets were constructed: using only nationally available data, using only data collected by survey and using the combined survey and nationally available data. The true seroprevalence of FMD at the village level was 61% when only young animals were included, but increased to 87% when all animals were included. The best performing model was a logistic regression model using the combined national and survey data to predict recent infection in villages. However, this still incorrectly classified 40% of villages, which suggests that using national-level data were not reliable enough for extrapolating seroprevalence in regions where conducting detailed surveys is impractical. Other methods for collected data on FMD such as the use of local reporting should be explored.

Estimating foot-and-mouth disease (FMD) prevalence in central Myanmar: Comparison of village headman and farmer disease reports with serological findings.

The impacts of foot-and-mouth disease (FMD) on food security in developing countries are difficult to quantify due to the scarcity of accurate data on the prevalence and incidence of affected villages. This is partly due to resource constraints as well as the logistical challenges of conducting regular diagnostic testing in remote locations. In this study, we used descriptive analysis and latent class analysis (LCA) models to analyse data collected during a field survey of 160 villages in central Myanmar in the Mandalay and Sagaing Regions over the 2012-2016 time period. We evaluated the performance of verbal reports made by village householders and headmen against serological data to retrospectively determine the FMD-infection status of our study area and to identify factors contributing to under-reporting. Blood samples were collected from approximately 30 cattle per village in both the 6- to 18-month age range and over 18-month age range to distinguish between recent and historic exposure. Village householders were asked to identify pictures of FMD-affected cattle amongst pictures of cattle affected with other common endemic diseases to assess the accuracy of their verbal reporting. The serological results confirmed that FMD is endemic in central Myanmar with village-level seroprevalence estimated at 56% for animals 6-18 months of age and 80% when all age groups were considered together. Most village householders were familiar with the clinical signs of FMD-affected cattle (72%). Based on the results from the LCA models, the village headman had a sensitivity of 77% and specificity of 75% for identifying FMD outbreaks in their village, whereas individual householders had a higher sensitivity and lower specificity of 80% and 56%, respectively. The level of disagreement between the different sources was correlated with the total number of cattle in the village and may potentially be worse in villages where endemic FMD may have led to a high level of natural immunity in cattle and subsequent masking of clinical signs. However, other regional effects such as the intensity of FMD extension efforts cannot be ruled out. Overall, the results suggest that verbal reports of FMD outbreaks from village headmen may be a useful tool to integrate into active FMD surveillance programmes in developing countries.

CO3+1 network formation in ultra-high pressure carbonate liquids.

Carbonate liquids are an important class of molten salts, not just for industrial applications, but also in geological processes. Carbonates are generally expected to be simple liquids, in terms of ionic interactions between the molecular carbonate anions and metal cations, and therefore relatively structureless compared to more "polymerized" silicate melts. But there is increasing evidence from phase relations, metal solubility, glass spectroscopy and simulations to suggest the emergence of carbonate "networks" at length scales longer than the component molecular anions. The stability of these emergent structures are known to be sensitive to temperature, but are also predicted to be favoured by pressure. This is important as a recent study suggests that subducted surface carbonate may melt near the Earth's transition zone (~44 km), representing a barrier to the deep carbon cycle depending on the buoyancy and viscosity of these liquids. In this study we demonstrate a major advance in our understanding of carbonate liquids by combining simulations and high pressure measurements on a carbonate glass, (K2CO3-MgCO3) to pressures in excess of 40 GPa, far higher than any previous in situ study. We show the clear formation of extended low-dimensional carbonate networks of close CO32- pairs and the emergence of a "three plus one" local coordination environment, producing an unexpected increase in viscosity with pressure. Although carbonate melts may still be buoyant in the lower mantle, an increased viscosity by at least three orders of magnitude will restrict the upward mobility, possibly resulting in entrainment by the down-going slab.

Structure and properties of Na5FeSi4O12 crystallized from 5Na2O-Fe2O3-8SiO2 glass.

The phase Na5FeSi4O12 [pentasodium iron(III) silicate] crystallizes readily from the Na2O-Fe2O3-SiO2 glass system in a relatively large compositional range. However, its crystal structure and properties have not been studied in detail since its discovery in 1930. In this work, the Na5FeSi4O12 phase was crystallized from a host glass with 5Na2O·Fe2O3·8SiO2 stoichiometry, and both the glass and the crystal were studied. It was found that the Na5FeSi4O12 phase crystallizes at ∼720 °C from the glass and melts at ∼830 °C when heated at a rate of 10 °C min-1. The crystal structure was solved using single-crystal X-ray diffraction and the refined data are reported for the first time for the Na5FeSi4O12 phase. It exhibits trigonal symmetry, space group R-3c, with a = 21.418 and c = 12.2911 Å. The Na atoms located between adjacent structural channels exhibit positional disorder and splitting which was only refined by using low-temperature data collection (150 K). While ∼7% of the total Fe cations occur as Fe2+ in the glass, four-coordinated Fe3+ constitutes ∼93% of the total Fe cations. However, iron in the crystal, which exhibits a paramagnetic behavior, is solely present as six-coordinated Fe3+. The magnetic and vibrational properties of the glass and crystal are discussed to provide additional insight into the structure.

Complex Magnetic Ordering in the Oxide Selenide Sr2Fe3Se2O3.

Sr2Fe3Se2O3 is a localized-moment iron oxide selenide in which two unusual coordinations for Fe2+ ions form two sublattices in a 2:1 ratio. In the paramagnetic region at room temperature, the compound adopts the crystal structure first reported for Sr2Co3S2O3, crystallizing in space group Pbam with a = 7.8121 Å, b = 10.2375 Å, c = 3.9939 Å, and Z = 2. The sublattice occupied by two-thirds of the iron ions (Fe2 site) is formed by a network of distorted mer-[FeSe3O3] octahedra linked via shared Se2 edges and O vertices forming layers, which connect to other layers by shared Se vertices. As shown by magnetometry, neutron powder diffraction, and Mössbauer spectroscopy measurements, these moments undergo long-range magnetic ordering below TN1 = 118 K, initially adopting a magnetic structure with a propagation vector (1/2 - δ, 0, 1/2) (0 ≤ δ ≤ 0.1) which is incommensurate with the nuclear structure and described in the Pbam1 '( a01/2)000 s magnetic superspace group, until at 92 K ( TINC) there is a first order lock-in transition to a structure in which these Fe2 moments form a magnetic structure with a propagation vector (1/2, 0, 1/2) which may be modeled using a 2 a × b × 2 c expansion of the nuclear cell in space group 36.178 B a b21 m (BNS notation). Below TN2 = 52 K the remaining third of the Fe2+ moments (Fe1 site) which are in a compressed trans-[FeSe4O2] octahedral environment undergo long-range ordering, as is evident from the magnetometry, the Mössbauer spectra, and the appearance of new magnetic Bragg peaks in the neutron diffractograms. The ordering of the second set of moments on the Fe1 sites results in a slight reorientation of the majority moments on the Fe2 sites. The magnetic structure at 1.5 K is described by a 2 a × 2 b × 2 c expansion of the nuclear cell in space group 9.40 I a b (BNS notation).