Environmental impacts of a novel biorefinery platform integrated with power-to-protein technology to decrease dependencies on soybean imports.

The consistent population growth is directly tied to the annual rise in livestock production, placing a substantial burden on the crop sector that supplies animal feed. The Danish government has been relying on importing soybeans and soybean meal to be used as animal feed. However, this sparked environmental concerns that require more environmentally friendly solutions, such as self-sufficiency in animal feed production. The rise of green biorefineries allows new avenues of animal proteinaceous feed production using green biomass to produce leaf protein concentrate (LPC) and utilize side-stream products, such as brown juice and press cake, for feed-quality products. This study evaluated the combination of grass-clover biorefinery and the power-to-X concept, including power-to-protein technology, for its environmental sustainability through a consequential life cycle assessment (CLCA). The production of protein concentrate from organic grass clover exhibits optimal environmental performance when press cake and brown juice are used for bioenergy recovery. The findings indicate that combining a green biorefinery with power-to-protein to fully valorize the carbon and nitrogen content of brown juice and press cake into feed-grade protein can increase the environmental benefits. Such an integration resulted in an avoided impact of -995.9 kg CO2-eq/tonne of protein concentrate. The avoided impacts of climate change could be higher within the first 20 years due to a higher carbon sequestration rate. However, even after 20 years when a new carbon balance in the soil is reached, the environmental gain could be big enough to encourage the production and use of organic grass-clover protein concentrate.

Using the product environmental footprint to strengthen the green market for sustainable feed ingredients; Lessons from a green biomass biorefinery in Denmark.

Finding new and sustainable proteinaceous feed ingredients, especially those produced from locally available resources, is at the top of the agenda of many countries, including Denmark, to become feed protein self-sufficient. Protein concentrate (PC) production via the biorefining of green biomass has attracted considerable interest in recent years since they are more land efficient and productive than soybeans. The biorefining of clover-grass into protein concentrate (GPC) is a promising substitute for soybean and soybean meal, however, the environmental impacts of GPC have not been studied. The Product Environmental Footprint (PEF) method, developed by EU Joint Research Centre for the "Single Market for Green Products Initiative" was employed to assess the environmental footprints of organic GPC. The instructions, methodology, and guidelines detailed in Product Environmental Footprint Category Rules (PEFCR) Feed for Food-Producing Animals were followed to implement this PEF study. The results were intended for in-house management, process improvement, early guidance on the environmental footprint (EF) of compound feeds containing GPC, and the EF of livestock and animal production whose feed ration contains GPC. Our results showed that GPC would have a climate change impact of 1091.47 kg CO2,eq/t GPC. We found that farming/cultivation, more specifically direct emissions from manure slurry, dominated most impact categories, including acidification and eutrophication. The results were found sensitive to the choice of allocation method and very case-specific. For instance, the climate change impact of GPC was higher under economic allocation than direct substation, but the acidification impact was lower in economic allocation than direct substitution. However, the direct substitution method, showed that treating the process residues in biogas plants could result in GPC with lower EFs. The sensitivity analysis confirmed that increasing the clover-grass productivity and decreasing either manure slurry application or nitrogenous emissions from its application are the keys to further decreasing the overall environmental impacts.

To what extent do waste management strategies need adaptation to post-COVID-19?

The world has been grappling with the crisis of the COVID-19 pandemic for more than a year. Various sectors have been affected by COVID-19 and its consequences. The waste management system is one of the sectors affected by such unpredictable pandemics. The experience of COVID-19 proved that adaptability to such pandemics and the post-pandemic era had become a necessity in waste management systems and this requires an accurate understanding of the challenges that have been arising. The accurate information and data from most countries severely affected by the pandemic are not still available to identify the key challenges during and post-COVID-19. The documented evidence from literature has been collected, and the attempt has been made to summarize the rising challenges and the lessons learned. This review covers all raised challenges concerning the various aspects of the waste management system from generation to final disposal (i.e., generation, storage, collection, transportation, processing, and burial of waste). The necessities and opportunities are recognized for increasing flexibility and adaptability in waste management systems. The four basic pillars are enumerated to adapt the waste management system to the COVID-19 pandemic and post-COVID-19 conditions. Striving to support and implement a circular economy is one of its basic strategies.

Developing a management-oriented simulation model of pesticide emissions for use in the life cycle assessment of paddy rice cultivation.

Management of the negative environmental impact of pesticides used in paddy fields requires the quantification of the emissions reaching relevant environmental compartments and the determination of the factors that influence such emissions. The present study is the first to develop a simulation model for estimating the fractions emitted to the air (fair), surface water (fsw), and the fractions that leach vertically (fvl) of pesticides applied in paddy fields for life cycle assessments (LCA). The emission quantification methods are based on the properties of the active ingredients of the pesticides and management aspects such as formulations (granular or liquid) and the water-holding period following application. The emission fractions of 37 pesticides used commonly in Japan were estimated using the presented model. A sensitivity analysis was conducted by adjusting parameters applied in the model to reveal their influence on the emission fractions. The parameters influencing fair included the formulation applied, while the water-holding period and waterproofing of the levee influenced fsw regardless of the formulation adopted, suggesting that local management could effectively reduce emissions to surface water. In addition, soil organic carbon content influenced fvl greatly, suggesting considerable regional variation in the emission factor. The developed model is expected to greatly improve the realism of impact assessment of pesticide in LCAs for paddy rice cultivation, considering it fills a gap in the fate model used in LCAs to estimate pesticide emissions to air, surface water, and soil in paddy fields.

Delta Life Cycle Assessment of Regenerative Agriculture in a Sheep Farming System.

Regenerative agriculture is being used by a small number of innovative farmers in Australia and elsewhere, using a range of holistic methods that work with the land and climate, such as short duration time of controlled grazing with long rest periods for the paddock and higher proportions of aboveground biomass, to improve soil health and farm profitability. This paper uses a delta life cycle assessment, focusing only on the differences between regenerative and conventional production systems to assess the potential impact of regenerative agriculture on a full range of midpoint impact categories and end-point areas of protection for an extensive sheep system in Australia. We assess the potential improvement to the water, carbon, and biodiversity footprints of sheep production, and find that regenerative agriculture has the potential to improve environmental performance compared with current industrial agricultural practices. In particular, there seems to be considerable potential to offset a significant proportion of the on-farm climate change impacts through a combination of biosequestration in soils and aboveground biomass and using harvested biomass to offset fossil fuel use. The assessment highlights the need for additional data to confirm the findings and the potential contribution that regenerative agriculture can make to sustainability of ruminant livestock production. Integr Environ Assess Manag 2020;16:282-290. © 2019 SETAC.

Defining Temporally Dynamic Life Cycle Assessment: A Review.

Durable goods last for years, decades, or even centuries. The environmental implications of the changing social, economic, and material conditions in which these goods are embedded can be overlooked by conventional life cycle assessment (LCA) that assumes a static world. To avoid this oversight, methods such as dynamic LCA (DLCA) are increasingly being used. Despite the growing use of DLCA, numerous questions remain, including how this dynamism is incorporated and what aspects of any given DLCA are dynamic. To answer these questions, we performed a review of 56 DLCAs, of which 44 propose a framework for DLCA covering all International Organization for Standardization phases of an LCA or that carry out a DLCA. Three types of LCA dynamism are identified and assessed for the reviewed literature: dynamic process inventory, dynamic systems, and dynamic characterization, while a further 2 types of LCA dynamism, dynamic scope and dynamic weighting, are proposed but not applied in the assessed literature. We found that the implementation of DLCA varies widely, and inventories accounting for dynamic characteristics are by far the most prevalent expression of DLCA. To reduce confusion surrounding the discussion of DLCA, we propose a definition of DLCA and its subtypes: full DLCA, partial DLCA, and prospective LCA. It is concluded that, among the current array of DLCA definitions, the implementation of partially dynamic LCA (PDLCA), which applies dynamism in only some parts of the LCA, is common and likely to continue. This is because PDLCA offers quantifiable marginal utility in terms of increased validity of the assessment, in relation to conventional LCA methods, but caution is needed in applying PDLCA because of potential for introducing bias into the LCA. To avoid this problem, we propose incorporating system dynamism as part of a sensitivity analysis, particularly in PDLCA that are limited by missing data. Integr Environ Assess Manag 2020;16:314-323. © 2019 SETAC.

Electricity production and consumption data from Danish power grid and governmental office buildings.

This data article is the second component of the two-part study on the effects of high-resolution energy data on building life cycle assessments (LCAs) (Environmental performance assessment of the use stage of buildings using dynamic high-resolution energy consumption and data on grid composition, in press) [1]. The first part being the article serving as the main platform for the communication of the conclusions of the study, and this data article serving as Supporting information, as well as a means to present any results and analysis not included in the article. The focus is to present additional information strengthening the findings of the article, by showing data, graphs, and tables not included in the research article due to size limitations.

Techno-environmental assessment of the green biorefinery concept: Combining process simulation and life cycle assessment at an early design stage.

The Green biorefinery (GBR) is a biorefinery concept that converts fresh biomass into value-added products. The present study combines a Process Flowsheet Simulation (PFS) and Life Cycle Assessment (LCA) to evaluate the technical and environmental performance of different GBR configurations and the cascading utilization of the GBR output. The GBR configurations considered in this study, test alternatives in the three main steps of green-biorefining: fractionation, precipitation, and protein separation. The different cascade utilization alternatives analyse different options for press-pulp utilization, and the LCA results show that the environmental profile of the GBR is highly affected by the utilization of the press-pulp and thus by the choice of conventional product replaced by the press-pulp. Furthermore, scenario analysis of different GBR configurations shows that higher benefits can be achieved by increasing product yields rather than lowering energy consumption. Green biorefining is shown to be an interesting biorefining concept, especially in a Danish context. Biorefining of green biomass is technically feasible and can bring environmental savings, when compared to conventional production methods. However, the savings will be determined by the processing involved in each conversion stage and on the cascade utilization of the different platform products.

WW LCI v2: A second-generation life cycle inventory model for chemicals discharged to wastewater systems.

We present a second-generation wastewater treatment inventory model, WW LCI 2.0, which on many fronts represents considerable advances compared to its previous version WW LCI 1.0. WW LCI 2.0 is a novel and complete wastewater inventory model integrating WW LCI 1.0, i.e. a complete life cycle inventory, including infrastructure requirement, energy consumption and auxiliary materials applied for the treatment of wastewater and disposal of sludge and SewageLCI, i.e. fate modelling of chemicals released to the sewer. The model is expanded to account for different wastewater treatment levels, i.e. primary, secondary and tertiary treatment, independent treatment by septic tanks and also direct discharge to natural waters. Sludge disposal by means of composting is added as a new option. The model also includes a database containing statistics on wastewater treatment levels and sludge disposal patterns in 56 countries. The application of the new model is demonstrated using five chemicals assumed discharged to wastewater systems in four different countries. WW LCI 2.0 model results shows that chemicals such as diethylenetriamine penta (methylene phosphonic acid) (DTPMP) and Diclofenac, exhibit lower climate change (CC) and freshwater ecotoxicity (FET) burdens upon wastewater treatment compared to direct discharge in all country scenarios. Results for Ibuprofen and Acetaminophen (more readily degradable) show that the CC burden depends on the country-specific levels of wastewater treatment. Higher treatment levels lead to lower CC and FET burden compared to direct discharge. WW LCI 2.0 makes it possible to generate complete detailed life cycle inventories and fate analyses for chemicals released to wastewater systems. Our test of the WW LCI 2.0 model with five chemicals illustrates how the model can provide substantially different outcomes, compared to conventional wastewater inventory models, making the inventory dependent upon the atomic composition of the molecules undergoing treatment as well as the country specific wastewater treatment levels.

Can farmers mitigate environmental impacts through combined production of food, fuel and feed? A consequential life cycle assessment of integrated mixed crop-livestock system with a green biorefinery.

This study evaluates environmental impacts of an integrated mixed crop-livestock system with a green biorefinery (GBR). System integration included production of feed crops and green biomasses (Sys-I) to meet the demand of a livestock system (Sys-III) and to process green biomasses in a GBR system (Sys-II). Processing of grass-clover to produce feed protein was considered in Sys-II, particularly to substitute the imported soybean meal. Waste generated from the livestock and GBR systems were considered for the conversion to biomethane (Sys-IV). Digestate produced therefrom was assumed to be recirculated back to the farmers' field (Sys-I). A consequential approach of Life Cycle Assessment (LCA) method was used to evaluate the environmental impacts of a combined production of suckler cow calves (SCC) and Pigs, calculated in terms of their live weight (LW). The functional unit (FU) was a basket of two products "1kgLW-SCC+1kgLW-Pigs", produced at the farm gate. Results obtained per FU were: 19.6kg CO2 eq for carbon footprint; 0.11kg PO4 eq for eutrophication potential, -129MJ eq for non-renewable energy use and -3.9 comparative toxicity units (CTUe) for potential freshwater ecotoxicity. Environmental impact, e.g. greenhouse gas (GHG) emission was primarily due to (i) N2O emission and diesel consumption within Sys-I, (ii) energy input to Sys-II, III and IV, and (iii) methane emission from Sys-III and Sys-IV. Specifically, integrating GBR with the mixed crop-livestock system contributed 4% of the GHG emissions, whilst its products credited 7% of the total impact. Synergies among the different sub-systems showed positive environmental gains for the selected main products. The main effects of the system integration were in the reductions of GHG emissions, fossil fuel consumption, eutrophication potential and freshwater ecotoxicity, compared to a conventional mixed crop-livestock system, without the biogas conversion facility and the GBR.

Potential to curb the environmental burdens of American beef consumption using a novel plant-based beef substitute.

The food demands of the United States (US) impart significant environmental pressures. The high rate of consumption of beef has been shown to be the largest driver of food-borne greenhouse gas emissions, water use and land occupation in the US diet. The environmental benefits of substituting animal products with vegetal foods are well documented, but significant psychological barriers persist in reducing meat consumption. Here we use life cycle assessment to appraise the environmental performance of a novel vegetal protein source in the mean US diet where it replaces ground beef, and in vegetarian and vegan diets where it substitutes for legumes, tofu and other protein sources. We find that relative to the mean US diet, vegetarian and vegan diets significantly reduce per-capita food-borne greenhouse gas emission (32% and 67%, respectively), blue water use (70% and 75%, respectively) and land occupation (70% and 79%, respectively), primarily in the form of rangeland. The substitution of 10%, 25% and 50% of ground beef with plant-based burger (PBB) at the national scale results in substantial reductions in annual US dietary greenhouse gas emissions (4.55-45.42 Mt CO2 equivalents), water consumption (1.30-12.00 km3) and land occupation (22300-190100 km2). Despite PBB's elevated environmental pressures compared to other vegetal protein sources, we demonstrate that minimal risk exists for the disservices of PBB substitution in non-meat diets to outweigh the benefits of ground-beef substitution in the omnivorous American diet. Demand for plant-based oils in PBB production has the potential to increase land use pressures in biodiversity hotspots, though these could be obviated through responsible land stewardship. Although the apparent environmental benefits of the PBB are contingent on actual uptake of the product, this study demonstrates the potential for non-traditional protein substitutes to play a role in a transition towards more sustainable consumption regimes in the US and potentially abroad.

Contributions of Local Farming to Urban Sustainability in the Northeast United States.

Food consumption is an important contributor to a city's environmental impacts (carbon emissions, land occupation, water use, etc.) Urban farming (UF) has been advocated as a means to increase urban sustainability by reducing food-related transport and tapping into local resources. Taking Boston as an illustrative Northeast U.S. city, we developed a novel method to estimate sub-urban, food-borne carbon and land footprints using multiregion-input-output modeling and nutritional surveys. Computer simulations utilizing primary data explored UF's ability to reduce these footprints using select farming technologies, building on previous city-scale UF assessments which have hitherto been dependent on proxy data for UF. We found that UF generated meagre food-related carbon footprint reductions (1.1-2.9% of baseline 2211 kg CO2 equivalents/capita/annum) and land occupation increases (<1% of baseline 9000 m2 land occupation/capita/annum) under optimal production scenarios, informing future evidence-based urban design and policy crafting in the region. Notwithstanding UF's marginal environmental gains, UF could help Boston meet national nutritional guidelines for vegetable intake, generate an estimated $160 million U.S. in revenue to growers and act as a pedagogical and community building tool, though these benefits would hinge on large-scale UF proliferation, likely undergirded by environmental remediation of marginal lands in the city.

Environmental impacts of producing bioethanol and biobased lactic acid from standalone and integrated biorefineries using a consequential and an attributional life cycle assessment approach.

This study evaluates the environmental impacts of biorefinery products using consequential (CLCA) and attributional (ALCA) life cycle assessment (LCA) approaches. Within ALCA, economic allocation method was used to distribute impacts among the main products and the coproducts, whereas within the CLCA system expansion was adopted to avoid allocation. The study seeks to answer the questions (i) what is the environmental impacts of process integration?, and (ii) do CLCA and ALCA lead to different conclusions when applied to biorefinery?. Three biorefinery systems were evaluated and compared: a standalone system producing bioethanol from winter wheat-straw (system A), a standalone system producing biobased lactic acid from alfalfa (system B), and an integrated biorefinery system (system C) combining the two standalone systems and producing both bioethanol and lactic acid. The synergy of the integration was the exchange of useful energy necessary for biomass processing in the two standalone systems. The systems were compared against a common reference flow: "1MJEtOH+1kgLA", which was set on the basis of products delivered by the system C. Function of the reference flow was to provide service of both fuel (bioethanol) at 99.9% concentration (wt. basis) and biochemical (biobased lactic acid) in food industries at 90% purity; both products delivered at biorefinery gate. The environmental impacts of interest were global warming potential (GWP100), eutrophication potential (EP), non-renewable energy (NRE) use and the agricultural land occupation (ALO). Regardless of the LCA approach adopted, system C performed better in most of the impact categories than both standalone systems. The process wise contribution to the obtained environmental impacts also showed similar impact pattern in both approaches. The study also highlighted that the recirculation of intermediate materials, e.g. C5 sugar to boost bioethanol yield and that the use of residual streams in the energy conversion were beneficial for optimizing the system performance.

Environmental life cycle assessment of producing willow, alfalfa and straw from spring barley as feedstocks for bioenergy or biorefinery systems.

The current study aimed at evaluating potential environmental impacts for the production of willow, alfalfa and straw from spring barley as feedstocks for bioenergy or biorefinery systems. A method of Life Cycle Assessment was used to evaluate based on the following impact categories: Global Warming Potential (GWP100), Eutrophication Potential (EP), Non-Renewable Energy (NRE) use, Agricultural Land Occupation (ALO), Potential Freshwater Ecotoxicity (PFWTox) and Soil quality. With regard to the methods, soil organic carbon (SOC) change related to the land occupation was calculated based on the net carbon input to the soil. Freshwater ecotoxicity was calculated using the comparative toxicity units of the active ingredients and their average emission distribution fractions to air and freshwater. Soil quality was based on the change in the SOC stock estimated during the land use transformation and land occupation. Environmental impacts for straw were economically allocated from the impacts obtained for spring barley. The results obtained per ton dry matter showed a lower carbon footprint for willow and alfalfa compared to straw. It was due to higher soil carbon sequestration and lower N2O emissions. Likewise, willow and alfalfa had lower EP than straw. Straw had lowest NRE use compared to other biomasses. PFWTox was lower in willow and alfalfa compared to straw. A critical negative effect on soil quality was found with the spring barley production and hence for straw. Based on the energy output to input ratio, willow performed better than other biomasses. On the basis of carbohydrate content of straw, the equivalent dry matter of alfalfa and willow would be requiring higher. The environmental impacts of the selected biomasses in biorefinery therefore would differ based on the conversion efficiency, e.g. of the carbohydrates in the related biorefinery processes.

Personal Metabolism (PM) coupled with Life Cycle Assessment (LCA) model: Danish Case Study.

Sustainable and informed resource consumption is the key to make everyday living sustainable for entire populations. An intelligent and strategic way of addressing the challenges related with sustainable development of the everyday living of consumers is to identify consumption-determined hotspots in terms of environmental and health burdens, as well as resource consumptions. Analyzing consumer life styles in terms of consumption patterns in order to identify hotspots is hence the focus of this study. This is achieved by taking into account the entire value chain of the commodities consumed in the context of environmental and human health burdens, as well as resource consumptions. A systematic commodity consumption, commodity disposal, and life style survey of 1281 persons living in urbanized Danish areas was conducted. The findings of the survey showed new impact dimensions in terms of Personal Metabolism (PM) patterns of residents living in urbanized areas of Denmark. Extending the PM analysis with Life Cycle Assessment (LCA) provided a clear picture of the per capita environmental and human health burdens, as well as resource consumptions, and the exact origin hereof. A generic PM-LCA Model for all the 1281 persons was set-up in Gabi 6. The assessment results obtained applying the model on all 1281 personal consumption scenarios yielded the 1281 Personal Impact Profiles (PIPs). Consumption of food and energy (electricity and thermal energy) proved to be the primary impact sources of PM, followed by transport. The PIPs further revealed that behavioral factors (e.g. different diets, use of cars, household size) affect the profiles. Hence, behavioral changes are one means out of many that humanity will most likely have to rely on during the sustainable development process. The results of this study will help the Danish and other comparable populations to identify and prioritize the steps towards reducing their environmental, human health, and resource consumption burdens.

Chemical footprint method for improved communication of freshwater ecotoxicity impacts in the context of ecological limits.

The ecological footprint method has been successful in communicating environmental impacts of anthropogenic activities in the context of ecological limits. We introduce a chemical footprint method that expresses ecotoxicity impacts from anthropogenic chemical emissions as the dilution needed to avoid freshwater ecosystem damage. The indicator is based on USEtox characterization factors with a modified toxicity reference point. Chemical footprint results can be compared to the actual dilution capacity within the geographic vicinity receiving the emissions to estimate whether its ecological limit has been exceeded and hence whether emissions can be expected to be environmentally sustainable. The footprint method was illustrated using two case studies. The first was all inventoried emissions from European countries and selected metropolitan areas in 2004, which indicated that the dilution capacity was likely exceeded for most European countries and all landlocked metropolitan areas. The second case study indicated that peak application of pesticides alone was likely to exceed Denmark's freshwater dilution capacity in 1999-2011. The uncertainty assessment showed that better spatially differentiated fate factors would be useful and pointed out other major sources of uncertainty and some opportunities to reduce these.

Choosing co-substrates to supplement biogas production from animal slurry--a life cycle assessment of the environmental consequences.

Biogas production from animal slurry can provide substantial contributions to reach renewable energy targets, yet due to the low methane potential of slurry, biogas plants depend on the addition of co-substrates to make operations profitable. The environmental performance of three underexploited co-substrates, straw, organic household waste and the solid fraction of separated slurry, were assessed against slurry management without biogas production, using LCA methodology. The analysis showed straw, which would have been left on arable fields, to be an environmentally superior co-substrate. Due to its low nutrient content and high methane potential, straw yields the lowest impacts for eutrophication and the highest climate change and fossil depletion savings. Co-substrates diverted from incineration to biogas production had fewer environmental benefits, due to the loss of energy production, which is then produced from conventional fossil fuels. The scenarios can often provide benefits for one impact category while causing impacts in another.

Reproductive performance in East Greenland polar bears (Ursus maritimus) may be affected by organohalogen contaminants as shown by physiologically-based pharmacokinetic (PBPK) modelling.

Polar bears (Ursus maritimus) feed mainly on ringed seal (Phoca hispida) and consume large quantities of blubber and consequently have one of the highest tissue concentrations of organohalogen contaminants (OHCs) worldwide. In East Greenland, studies of OHC time trends and organ system health effects, including reproductive, were conducted during 1990-2006. However, it has been difficult to determine the nature of the effects induced by OHC exposures on wild caught polar bears using body burden data and associated changes in reproductive organs and systems. We therefore conducted a risk quotient (RQ) evaluation to more quantitatively evaluate the effect risk on reproduction (embryotoxicity and teratogenicity) based on the critical body residue (CBR) concept and using a physiologically-based pharmacokinetic (PBPK) model. We applied modelling approaches to PCBs, p,p'-DDE, dieldrin, oxychlordane, HCHs, HCB, PBDEs and PFOS in East Greenland polar bears based on known OHC pharmacokinetics and dynamics in laboratory rats (Rattus rattus). The results showed that subcutaneous adipose tissue concentrations of dieldrin (range: 79-1271 ng g(-1) lw) and PCBs (range: 4128-53,923 ng g(-1) lw) reported in bears in the year 1990 were in the range to elicit possible adverse health effects on reproduction in polar bears in East Greenland (all RQs > or = 1). Similar results were found for PCBs (range: 1928-17,376 ng g(-1) lw) and PFOS (range: 104-2840 ng g(-1) ww) in the year 2000 and for dieldrin (range: 43-640 ng g(-1) lw), PCBs (range: 3491-13,243 ng g(-1) lw) and PFOS (range: 1332-6160 ng g(-1) ww) in the year 2006. The concentrations of oxychlordane, DDTs, HCB and HCHs in polar bears resulted in RQs<1 and thus appear less likely to be linked to reproductive effects. Furthermore, sumRQs above 1 suggested risk for OHC additive effects. Thus, previous suggestions of possible adverse health effects in polar bears correlated to OHC exposure are supported by the present study. This study also indicates that PBPK models may be a supportive tool in the evaluation of possible OHC-mediated health effects for Arctic wildlife.