Influence of bone density on stability in TBW.

Osteoporosis is a common disease that leads to a reduction in bone density and increases the risk of fractures. Stable surgical treatment is particularly important for these fractures. The aim of this study was to examine the influence of bone density in the area of ​​the proximal ulna on the failure of the fixation technique of K-wires in tension band wiring (TBW). We provided 10 ulna specimens with TBW and biomechanically examined the pull-out strength of bi- and tricortical K-wires. Bone density measurement was performed using qCT. In the paired t-test, the tricortical group showed a significantly higher pull-out strength in relation to bone density than the bicortical group (p = 0.001). Furthermore, the Pearson correlation showed a high influence of bone density on pull-out strength in the tricortical group (r = 0.544), but without significance (p = 0.100).Our work shows that bone density has a direct effect on the pull-out strength of K-wires in TBW. TBW should therefore be used as osteosynthesis technique, especially in young patients with non-osteoporotic bones. In the case of osteoporotic fractures, alternative procedures should be preferred.

A Case Showing a New Diagnostic Aspect of the Application of Radiofrequency Echographic Multi-Spectrometry (REMS).

Radiofrequency echographic multi-spectrometry (REMS) is an ultrasound technique that has been recently introduced in the medical field to detect osteoporosis and fracture risk at axial sites. The use of sonography to visualize the region of interest (ROI) of the hip neck provides the opportunity to identify occult fractures. A 91-year-old woman with persistent right leg pain was referred to rheumatologist due to a known history of arthritis and osteoporosis. She was able to walk using a crutch, although experiencing an antalgic gait. The patient had recently fallen on her right side from standing height. During the visualization of the ROI of the right femoral neck using REMS, an abrupt break of the femoral cortex suspected to be a fracture was seen; therefore, the measurement of the femoral neck was performed on the left side. The T-score had value of -2.9 SD and the fragility score was 86.7. Due to unclear signs of a fracture after an X-ray of the hip, a computed tomography (CT) exam of the hip was performed, which revealed a femoral neck fracture. Occult fractures of the femoral neck are challenging to diagnose and require numerous radiologic exams. The use of ultrasound as a method to measure bone density allows the simultaneous diagnosis of osteoporosis and detection of fractures.

Effect of the body mass index, basal metabolic rate, and body fat on the radiofrequency echographic multi-spectrometry (REMS)-based bone mineral density and fracture risk: a cross-sectional study.

Radiofrequency echographic multi-spectrometry (REMS) is a method to assess bone mineral density (BMD) of the axial skeleton, fragility score (FS), body mass index (BMI), basal metabolic rate (BMR), and body fat (BF) in %. The aim of the study was to investigate the influence of the BMI, BMR, and BF on the BMD and fracture risk with REMS. We conducted a cross-sectional study among 313 women, aged 20-90 years who underwent a screening for osteoporosis with REMS. Kruskal-Wallis was used to analyze the differences in BMI, BMR, and BF between the groups according to the BMD: normal BMD, osteopenia and osteoporosis and differences in the FS, fracture risk assessment (FRAX) for major osteoporotic fractures and for hip fractures (HF) according to the BMI groups: underweight, normal weight, overweight, obese, and extreme obese. Linear regression was used to assess the correlations BMI-BMD, BMR-BMD, and BF-BMD. BMI, BMR, and BF differed significantly between the groups according to the BMD (p < 0.001, p = 0.028, and p < 0.001, respectively). BMR showed high positive correlation to BMD (R = 0.765) with 95% confidence interval (CI) [0.715, 0.807] and significance of p < 0.001. BMI correlated significantly to BMD (p < 0.001), the correlation was low positive (R = 0.362) with 95% CI [0.262, 0.455]. In the BMI groups, there was significant difference in FRAX for HF and FS with p value 0.014 and < 0.001, respectively. Subjects with low BMI, BMR, and BF are at high risk for osteoporosis. Underweight women show significantly high fracture risk, assessed with FRAX and FS.

An observational study of the radiofrequency echographic multi-spectrometry (REMS)-based fragility score of the lumbar spine and total fracture risk at 5 years in women.

A novel fragility score (FS) parameter, obtained during radiofrequency echographic multi-spectrometry (REMS), was developed to estimate the ultrasound-based skeletal fragility. The aim of our study is to assess the REMS-based FS of the lumbar spine (LS) among the Bulgarian women and to compare their characteristics acquired with REMS between fracture risk classes corresponding to a total fracture risk at 5 years for major osteoporotic fractures (MOF). A total of 100 Bulgarian women, who underwent a screening for osteoporotic fracture risk using the REMS technology, were included in a prospective observational study. The mean age was 60 years (years) ± 13.9 standard deviations. We assessed the FS of the LS and for each subject. The fracture risk class (R1-R7) was identified using a table combining measured REMS T score and FS values. The mean FS was 36.9 ± 17.4 SD (range: 18.5-84.3). Twelve subjects (12%) were classified into the R6 group, twenty-three (23%) into the R5, sixty-one (61%) into R4, and four (4%) into R3. Statistical analysis showed significant difference in age, height, BMD, T score, Z score, age of menopause, FRAX for MOF, and FRAX for hip fractures between the risk class groups. This is the first study which showed the REMS-based FS of the lumbar spine among the Bulgarian women. T score alone is not a good predictor of fractures. Our study showed that its use in combination with the fragility score obtained during REMS offers a robust assessment of the fracture risk at 5 years for MOF.

Prevalence of low bone mineral density at axial sites and fracture risk in Bulgarian population.

Background: Osteoporosis is a common chronic disease characterized by low bone mineral density (BMD) and microarchitectural deterioration of the bone, which are associated with increased risk of fragility fractures. Currently the most popular tool is the fracture risk assessment model FRAX to calculate the 10-year probability of major osteoporotic fractures (MOF) and hip fractures (HF). Objective: To investigate the prevalence of low BMD at axial sites and fracture risk in Bulgarian population. Methods: We retrospectively analyzed dual energy X-ray absorptiometry (DXA) scan results of 12 478 subjects. Scan results included BMD and T-score assessments of lumbar spine and femoral neck. FRAX major osteoprotic fracture (MOF) and FRAX hip fracture (HF) were assessed in subjects between 40 and 90 years using BMD values. Results: Of total 12478 subjects, 12119 were women and 359 were men. The mean age of the subjects was 61 years (yrs.) ± 10 yrs. The overall prevalence of low BMD at the lumbar spine was 6084/9336 subjects (65.2%). 3502/9336 subjects (37.5%) were considered as osteopenic and 2582/9336 subjects (27.7%) were considered as osteoporotic. The overall prevalence of low BMD at the femoral neck was 2036/3140 (64.8%). 1641/3140 subjects (52.3%) were classified as osteopenic and 395/3 140 subjects (12.6%) were classified as osteoporotic. The mean values of FRAX MOF and FRAX HF increased significantly with increasing the age interval. Conclusion: This study is the largest epidemiological research in Bulgaria up to date about the prevalence of low BMD at axial sites.

Instability of the proximal radioulnar joint in Monteggia fractures-an experimental study.

BACKGROUND: A Monteggia fracture is defined as a fracture of the proximal ulna combined with a luxation of the radial head. The aim of the present work is to evaluate the extent of instability of the radius head in the proximal radioulnar joint (PRUJ) as a function of the severity of elbow fracture and ligamentous injury in an experimental biomechanical approach. METHODS: Eight fresh-frozen cadaver arms were used. All soft tissues were removed except for the ligamentous structures of the PRUJ and forearm. A tensile force of 40 N was exerted laterally, anteriorly or posteriorly onto the proximal radius. The dislocation in the PRUJ was photometrically recorded and measured by two independent examiners. After manual dissection of the ligamentous structures up to the interosseous membrane, the instability was documented and subsequently measured. The following dissection levels were differentiated: intact ligamentous structures, dissection of annular ligament, oblique cord and proximal third of interosseous membrane. RESULTS: An anterior instability remains relatively constant until the proximal third of the interosseous membrane is dissected. The radial head already dislocates relevantly in the posterior direction after dissection of the annular ligament with an additional considerable stability anteriorly and laterally. Subsequently, the posterior instability increases less pronouncedly in regard of distal resected structures. The lateral instability increases constantly during the progressing resection of the ligamentous structures. CONCLUSION: On the one hand, a complete healing of the ligament injury after functional treatment is hardly conceivable with ligamentary damage up to the level of the proximal interosseous membrane. A remaining instability of the proximal radius could therefore be a possible cause for the unsatisfactory clinical results after certain Monteggia fractures. On the other hand, the present study may give a possible explanation (i.e. early dorsal radius head dislocation after dissection of annular ligament) why the Bado II injury is the most frequent type of Monteggia fractures.

Methods to reliably estimate faecal sludge quantities and qualities for the design of treatment technologies and management solutions.

Sanitation access in urban areas of low-income countries is provided through unstandardized onsite technologies containing accumulated faecal sludge. The demand for infrastructure to manage faecal sludge is increasing, however, no reliable method exists to estimate total accumulated quantities and qualities (Q&Q) This proposed approach averages out complexities to estimate conditions at a centralized to semi-centralized scale required for management and treatment technology solutions, as opposed to previous approaches evaluating what happens in individual containments. Empirical data, demographic data, and questionnaires were used in Kampala, Uganda to estimate total faecal sludge accumulation in the city, resulting in 270 L/cap∙year for pit latrines and 280 L/cap∙year for septic tanks. Septic tank sludge was more dilute than pit latrine sludge, however, public toilet was not a distinguishing factor. Non-household sources of sludge represent a significant fraction of the total and have different characteristics than household-level sludge. Income level, water connection, black water only, solid waste, number of users, containment volume, emptying frequency, and truck size were predictors of sludge quality. Empirical relationships such as a COD:TS of 1.09 ±â€¯0.56 could be used for more resource efficient sampling campaigns. Based on this approach, spatially available demographic, technical and environmental (SPA-DET) data and statistical relationships between parameters could be used to predict Q&Q of faecal sludge.

The pleiotropic profile of the indirubin derivative 6BIO overcomes TRAIL resistance in cancer.

TRAIL (TNFα-related apoptosis-inducing factor) has been promoted as a promising anti-cancer agent. Unfortunately many tumor cells develop resistance towards TRAIL due to numerous defects in apoptotic signaling. To handle this problem combination therapy with compounds affecting as many different anti-apoptotic targets as possible might be a feasible approach. The bromo-substituted indirubin derivative 6BIO meets this challenge: Treatment of breast cancer and bladder carcinoma cell lines with micromolar concentrations of 6BIO abrogates cellular growth and induces apoptosis. Combination of subtoxic amounts of 6BIO with ineffective doses of TRAIL completely abolishes proliferation and long-term survival of cancer cells. As shown in two-dimensional as well as three-dimensional cell culture models, 6BIO potently augments TRAIL-induced apoptosis in cancer cell lines. The potent chemosensitizing effect of 6BIO to TRAIL-mediated cell death is due to the pleiotropic inhibitory profile of 6BIO. As shown previously, 6BIO abrogates STAT3, PDK1 as well as GSK3 signaling and moreover, inhibits the expression of the anti-apoptotic Bcl-2 family members Bcl-xL and Mcl-1 on mRNA as well as on protein level, as demonstrated in this study. Moreover, the expression of cFLIP and cIAP1 is significantly downregulated in 6BIO treated cancer cell lines. In sum (subtoxic concentration of) the multi-kinase inhibitor 6BIO serves as a potent chemosensitizing agent fighting TRAIL resistant cancer cells.

Indirubin derivative 6BIO suppresses metastasis.

While metastasis is the chief cause of cancer mortality, there nonetheless remains a lack of antimetastatic therapies that are clinically available. In this study, we present the indirubin derivative 6-bromo-indirubin-3'-oxime (6BIO) as a promising antimetastatic agent. 6BIO strongly reduced formation of lung metastasis in the well-established 4T1 mouse model of aggressive breast cancer. Several major hallmarks of the metastatic process were affected by subtoxic concentrations of 6BIO, which inhibited adhesion, migration, and invasion of a variety of metastatic cell types in vitro. Mechanistic analyses focused on known targets of 6BIO, which were silenced by this compound. Unexpectedly, RNAi-mediated silencing of glycogen synthase kinase 3ß (GSK3ß) and phosphoinositide-dependent protein kinase 1 (PDK1), both modulators of cellular metastasis targeted by 6BIO, were not found to affect invasive migration in this study. Instead, the Jak/STAT3 signaling pathway appeared to play a major role through modulation of its downstream migration regulators C-terminal tensin-like protein and matrix metalloproteinase 2. However, PDK1 and GSK3ß contributed to the overall response to 6BIO, as silencing of all three pathways resulted in almost complete inhibition of migration, phenocopying the 6BIO response. Taken together, our findings illustrate the antimetastatic activity of 6BIO on the basis of its ability to simultaneously inhibit several kinase cascades involved in metastasis of cancer cells, supporting the concept of "polypharmacology" in developing drugs to attack metastasis, the most deadly aspect of cancer.