Sulfur isotope enrichment during maintenance metabolism in the thermophilic sulfate-reducing bacterium Desulfotomaculum putei.

Values of Delta(34)S (=delta(34)S(HS)-delta(34)S(SO(4)), where delta(34)S(HS) and delta(34)S(SO(4)) indicate the differences in the isotopic compositions of the HS(-) and SO(4)(2-) in the eluent, respectively) for many modern marine sediments are in the range of -55 to -75 per thousand, much greater than the -2 to -46 per thousand epsilon(34)S (kinetic isotope enrichment) values commonly observed for microbial sulfate reduction in laboratory batch culture and chemostat experiments. It has been proposed that at extremely low sulfate reduction rates under hypersulfidic conditions with a nonlimited supply of sulfate, isotopic enrichment in laboratory culture experiments should increase to the levels recorded in nature. We examined the effect of extremely low sulfate reduction rates and electron donor limitation on S isotope fractionation by culturing a thermophilic, sulfate-reducing bacterium, Desulfotomaculum putei, in a biomass-recycling culture vessel, or "retentostat." The cell-specific rate of sulfate reduction and the specific growth rate decreased progressively from the exponential phase to the maintenance phase, yielding average maintenance coefficients of 10(-16) to 10(-18) mol of SO(4) cell(-1) h(-1) toward the end of the experiments. Overall S mass and isotopic balance were conserved during the experiment. The differences in the delta(34)S values of the sulfate and sulfide eluting from the retentostat were significantly larger, attaining a maximum Delta(34)S of -20.9 per thousand, than the -9.7 per thousand observed during the batch culture experiment, but differences did not attain the values observed in marine sediments.

Image averaging of flexible fibrous macromolecules: the clathrin triskelion has an elastic proximal segment.

We have developed computational techniques that allow image averaging to be applied to electron micrographs of filamentous molecules that exhibit tight and variable curvature. These techniques, which involve straightening by cubic-spline interpolation, image classification, and statistical analysis of the molecules' curvature properties, have been applied to purified brain clathrin. This trimeric filamentous protein polymerizes, both in vivo and in vitro, into a wide range of polyhedral structures. Contrasted by low-angle rotary shadowing, dissociated clathrin molecules appear as distinctive three-legged structures, called "triskelions" (E. Ungewickell and D. Branton (1981) Nature 289, 420). We find triskelion legs to vary from 35 to 62 nm in total length, according to an approximately bell-shaped distribution (mu = 51.6 nm). Peaks in averaged curvature profiles mark hinges or sites of enhanced flexibility. Such profiles, calculated for each length class, show that triskelion legs are flexible over their entire lengths. However, three curvature peaks are observed in every case: their locations define a proximal segment of systematically increasing length (14.0-19.0 nm), a mid-segment of fixed length (approximately 12 nm), and a rather variable end-segment (11.6-19.5 nm), terminating in a hinge just before the globular terminal domain (approximately 7.3 nm diameter). Thus, two major factors contribute to the overall variability in leg length: (1) stretching of the proximal segment and (2) stretching of the end-segment and/or scrolling of the terminal domain. The observed elasticity of the proximal segment may reflect phosphorylation of the clathrin light chains.

The maturation-dependent conformational change of phage T4 capsid involves the translocation of specific epitopes between the inner and the outer capsid surfaces.

After polymerization of the phage T4 prohead is complete, its capsid expands by approximately 16%, is greatly stabilized, and acquires the capacity to bind accessory proteins. These effects are manifestations of a large-scale, irreversible, conformational change undergone by the major capsid protein, gp23 (521 residues) which is cleaved to gp23* (residues 66-521) during this maturation process. In order to explore its structural basis, we have performed immunoelectron microscopy with antibodies raised against synthetic peptides that correspond to precisely defined segments of the amino acid sequence of gp23. These antibodies were used to label purified polyheads (tubular polymorphic variants of the normal icosahedral capsid), in experiments designed to impose constraints on the possible foldings of the gp23/gp23* polypeptide chains in their successive conformational states. Peptide 1 (residues 48-57), part of the gp23-delta domain that is excised when gp23 is converted to gp23*, resides on the inner surface of the precursor surface lattice, but--if not proteolyzed--is found on the outer surface of the mature surface lattice. Peptide 2 (residues 65-73), immediately distal to the cleavage site, is located on the inside of the precursor surface lattice, and remains there subsequent to expansion. Peptide 3 (residues 139-146) is translocated in the opposite direction from peptide 1, i.e., from the outer to the inner surface upon expansion; moreover, expansion greatly increases the polyheads' affinity for these antibodies. Peptide 5 (residues 301-308) is located on the inside in both the precursor and the mature states. Taking into account data from other sources, these observations imply that the conformational change that underlies capsid expansion involves a radical reorganization of the proteins' structure, in which at least three distinct epitopes, situated in widely differing parts of the polypeptide chain, are translocated from one side to the other. Moreover, the amino-terminal portion of gp23/gp23*, around the cleavage site, is particularly affected.

Biosynthetic pathways of filaggrin and loricrin--two major proteins expressed by terminally differentiated epidermal keratinocytes.

We have used immunoelectron microscopy to map the biosynthetic pathways of loricrin and filaggrin in epidermal keratinocytes at successive stages of differentiation in newborn mouse skin. The filaggrin epitope is first detected in large, irregularly shaped, keratohyalin granules (F-granules) in the stratum granulosum, and then distributed throughout the cytoplasms of the innermost layers of stratum corneum cells. We conclude that the poly-protein filaggrin precursor is first accumulated in F-granules, from which it is subsequently released and processed into filaggrin, and becomes associated with the densely packed bundles of keratin filaments inside stratum corneum cells. Its diminished visibility in the outer layers correlates with the known degradation of filaggrin to free amino acids. Loricrin is first detected in small round keratohyalin granules (L-granules), and subsequently at the periphery of cells throughout the stratum corneum. Labeling of purified keratinocyte envelopes establishes that this loricrin epitope is exposed only at their inner (cytoplasmic) surface. Thus loricrin is initially accumulated in L-granules, to be released at a specifically programmed stage of keratinocyte maturation, and incorporated into the covalently cross-linked lining of the cell envelope. Since loricrin is rich in cysteine, L-granules account for the sulfur-rich keratohyalin granules described earlier. Proposals are made to rationalize why, subsequent to synthesis, filaggrin precursor and loricrin should be segregated both from each other and from the rest of the cytoplasm.

Identification of a major keratinocyte cell envelope protein, loricrin.

During epidermal cell cornification, the deposition of a layer of covalently cross-linked protein on the cytoplasmic face of the plasma membrane forms the cell envelope. We have isolated and characterized cDNA clones encoding a major differentiation product of mouse epidermal cells, which has an amino acid composition similar to that of purified cell envelopes. Transcripts of this gene are restricted to the granular layer and are as abundant as the differentiation-specific keratins, K1 and K10. An antiserum against a C-terminal peptide localizes this protein in discrete granules in the stratum granulosum and subsequently at the periphery of stratum corneum cells. Immunofluorescence and immunoelectron microscopy detect this epitope only on the inner surface of purified cell envelopes. Taken together, these results suggest that it is a major component of cell envelopes. On the basis of its presumed function, this protein is named loricrin.

Identification of a 69-kilodalton nonfimbrial protein as an agglutinogen of Bordetella pertussis.

Cells of Bordetella pertussis BP353, a nonfimbriated Eldering serotype 1.3 strain, were used as an immunogen to produce three monoclonal antibodies, BPE3, BPD8, and BPE8, that agglutinated the immunizing cells, as well as certain other nonfimbriated and fimbriated serotype 3-containing B. pertussis strains. The antibodies did not agglutinate serotype 1 or nontypable B. pertussis cells. These monoclonal antibodies specifically detected a 69-kilodalton (kDa) band on Western blots (immunoblots) containing whole B. pertussis cell lysates of Eldering agglutinogen serotypes 1.3, 1.3.6, 1.2.3.4, and 1.2.3.4.6. This 69-kDa antigen was released from the bacteria by cell incubation for 60 min at 60 degrees C, and it was purified by affinity chromatography with a BPE3-agarose affinity matrix. Purified material was used to produce a polyclonal antiserum that agglutinated all nonfimbriated and fimbriated B. pertussis cells containing serotype 3 agglutinogen. Immunogold electron microscopy and indirect immunofluorescence studies demonstrated that it is an outer membrane constituent but nonfimbrial in appearance. BPE3 did not detect purified fimbriae on Western blots, and antibodies to these fimbriae did not bind to the 69-kDa component. Although B. bronchiseptica and B. parapertussis cells were not agglutinated by the monoclonal antibodies, antigenically similar proteins were detected in extracts of the bacteria. These results identify the 69-kDa protein as a nonfimbrial agglutinogen present on all virulent strains of B. pertussis. The monoclonal antibodies described here should be useful for further studies on the structure and function of this protein.

Naturally crystalline porin in the outer membrane of Bordetella pertussis.

The Gram-negative bacterium Bordetella pertussis is the agent responsible for whooping-cough, and much interest has focused on the functions, structures and immunological properties of the molecules exposed at its outer surface. We have found by electron microscopy that cells of two strains of B. pertussis are covered with a crystalline surface lattice. This lattice is not an extrinsic layer of high molecular weight glycoproteins, such as occur on many other bacteria, but is a natural crystal of an intrinsic membrane protein of 40,000 Mr. This molecule has been shown to be an anion-selective member of an extensive family of proteins ("porins") that render Gram-negative outer membranes permeable to solutes of up to approximately 650 Mr. Computer image processing reveals a trimeric channel-like structure that closely resembles other porins visualized in artificial arrays after treatment with detergents, but in a novel (p2) crystal form. This correlation provides a "missing link" between earlier structural studies based on artificial arrays of porins (of undefined physiological status), and membrane-permeabilization experiments with solubilized porins (in undefined structural states). For the strains characterized so far, crystallinity of the porin surface lattice shows an intriguing correlation with nonpathogenicity.

Membrane contents of distinct subpopulations of coated vesicles determined by scanning transmission electron microscopy.

In order to investigate the heterogeneity of clathrin-coated vesicles purified from rat liver, and to quantitate rigorously their membrane contents, we have analyzed scanning transmission electron micrographs of unstained coated vesicles before and after extraction with the non-ionic detergent Triton X-100, as well as of vesicles whose coats had been removed by dialysis against 10 mM or 100 mM Tris (pH 8.2). Their respective distributions of particle masses were thus determined and compared, in light of complementary biochemical quantitations of lipid and protein. Smaller coated particles, 25-45 MDa in mass and 60-80 nm in diameter, lose no mass when extracted with Triton, and disappear when their coats are dissociated. We conclude that they do not contain membrane vesicles, although they have dense, presumably proteinaceous, cores. They may represent particles generated during tissue homogenization or, possibly, a storage form of clathrin. The remaining 70% contain bona fide vesicles: these particles are 75-150 nm in diameter, and their average mass is about 80 MDa, of which 48 MDa is contributed by coat proteins, 10-12 MDa by phospholipid and cholesterol, and 20-22 MDa by vesicle-associated proteins. Their vesicles are of two types: smaller, denser, vesicles that contain substantial amounts of internalized material, and larger, less dense, vesicles that do not. The distinction between them may, in view of other findings, reflect a difference between coated vesicles derived respectively from the Golgi and the plasma membrane.

Coloration of silver-stained protein bands in polyacrylamide gels is caused by light scattering from silver grains of characteristic sizes.

This study investigates the physical basis of color effects in the detection of proteins in polyacrylamide gels by silver staining. Specifically, the hypothesis that different colors may correlate with the development of silver grains of characteristic sizes was investigated by electron microscopy. Protein bands that stained brown, yellow, and blue were excised from stained gels and prepared for electron microscopy by thin-sectioning. In each case, the size distributions of globular silver grains were determined directly from the electron micrographs. We found that blue bands have larger silver grains (with diameters of 40-100 nm) than yellow (21-39 nm) or brown bands (17-35 nm). On the basis of these and other observations, a general mechanism is proposed whereby chemical specificity of electrophoretically separated proteins is expressed in color-specific silver staining.

Helical structure of Bordetella pertussis fimbriae.

The helical structures of Bordetella pertussis fimbriae of serotypes 2 and 6 were determined by optical diffraction analysis of electron micrographs of negatively stained paracrystalline bundles of purified fimbriae. The fimbrial structure is based on an axial repeat of 13 nm that contains five repeating units in two complete turns of a single-start helix. This structure was confirmed by direct measurements of mass per unit length for individual fimbriae performed by dark-field scanning transmission electron microscopy of unstained specimens. These data further established that the helically repeating unit is a monomer of fimbrial protein (Mr congruent to 22,000 for type 2 and Mr congruent to 21,500 for type 6). Radial density profiles calculated from the scanning transmission electron micrographs showed that the fimbria has peak density at its center, i.e., no axial channel, consistent with the results of conventional negative-staining electron microscopy. The radial profile gives an outermost diameter of approximately 7.5 nm, although the peripheral density is, on average, diffuse, allowing sufficient intercalation between adjacent fimbriae to give a center-to-center spacing of approximately 5.5 nm in the paracrystals. Despite serological and biochemical differences between type 2 and type 6 fimbriae, the packing arrangements of their fimbrial subunits are identical. From this observation, we infer that the respective subunits may have in common conserved regions whose packing dictates the helical geometry of the fimbria. It is plausible that a similar mechanism may underlie the phenomenon of phase variations in other systems of bacterial fimbriae.

A physiological role for titin and nebulin in skeletal muscle.

Production of active force in skeletal muscle results from the interaction of myosin-containing thick filaments with actin-containing thin filaments. These muscles are also passively elastic, producing forces that resist stretch independently of ATP splitting or of interaction between the filaments. The mechanism of this passive elasticity is unknown; suggestions include gap filaments in the region between thick and thin filaments in muscles stretched beyond filament overlap, or intermediate filaments which connect successive Z-disks. Recently, the two exceptionally large proteins titin (also called connectin) and nebulin (originally called band 3) have been implicated in passive elasticity (for review see refs 7, 8). Here, we show that after these proteins are degraded by low doses of ionizing radiation, the ability of single skinned muscle cells to generate both passive tension in response to stretch and active tension in response to calcium is greatly reduced. These effects are accompanied by axial misalignment of thick filaments. Titin and/or nebulin apparently provide axial continuity for the production of resting tension on stretch and also tend to keep the thick filaments centred within the sarcomere during force generation.

Hexavalent capsomers of herpes simplex virus type 2: symmetry, shape, dimensions, and oligomeric status.

The structures of the hexavalent capsomers of herpes simplex virus type 2 were analyzed by negative staining electron microscopy of capsomer patches derived from partially disrupted nucleocapsids. Optimally computer-averaged images were formed for each of the three classes of capsomer distinguished by their respective positions on the surface of the icosahedral capsid with a triangulation number of 16; in projection, each capsomer exhibited unequivocal sixfold symmetry. According to correspondence analysis of our set of capsomer images, no significant structural differences were detected among the three classes of capsomers, as visualized under these conditions. Taking into account information from images of freeze-dried, platinum-shadowed nucleocapsid fragments, it was established that each hexavalent capsomer is a hexamer of the 155-kilodalton major capsid protein. The capsomer has the form of a sixfold hollow cone approximately 12 nm in diameter and approximately 15 nm in depth, whose axial channel tapers in width from the outside towards the inner capsid surface.

Assembly-dependent conformational changes in a viral capsid protein. Calorimetric comparison of successive conformational states of the gp23 surface lattice of bacteriophage T4.

Inter- and intra-subunit bonding within the surface lattice of the capsid of bacteriophage T4 has been investigated by differential scanning calorimetry of polyheads, in conjunction with electron microscopy, limited proteolysis and sodium dodecyl sulfate/polyacrylamide gel electrophoresis. The bonding changes corresponding to successive stages of assembly of the major capsid protein gp23, including its maturation cleavage, were similarly characterized. The uncleaved/unexpanded surface lattice exhibits two endothermic transitions. The minor event, at 46 degrees C, does not visibly affect the surface lattice morphology and probably represents denaturation of the N-terminal domain of gp23. The major endotherm, at 65 degrees C, represents denaturation of the gp23 polymers. Soluble gp23 from dissociated polyheads is extremely unstable and exhibits no endotherm. Cleavage of gp23 to gp23* and the ensuing expansion transformation effects a major stabilization of the surface lattice of polyheads, with single endotherms whose melting temperatures (t*m) range from 73 to 81 degrees C, depending upon the mutant used and the fraction of gp23 that is cleaved to gp23* prior to expansion. Binding of the accessory proteins soc and hoc further modulates the thermograms of cleaved/expanded polyheads, and their effects are additive. hoc binding confers a new minor endotherm at 68 degrees C corresponding to at least partial denaturation of hoc. Denatured hoc nevertheless remains associated with the surface lattice, although in an altered, protease-sensitive state which correlates with delocalization of hoc subunits visualized in filtered images. While hoc binding has little effect on the thermal stability of the gp23* matrix, soc binding further stabilizes the surface lattice (delta Hd approximately +50%; delta t*m = +5.5 degrees C). It is remarkable that in all states of the surface lattice, the inter- and intra-subunit bonding configurations of gp23 appear to be co-ordinated to be of similar thermal stability. Thermodynamically, the expansion transformation is characterized by delta H much less than 0; delta Cp approximately 0, suggesting enhancement of van der Waals' and/or H-bonding interactions, together with an increased exposure to solvent of hydrophobic residues of gp23* in the expanded state. These findings illuminate hypotheses of capsid assembly based on conformational properties of gp23: inter alia, they indicate a role for the N-terminal portion of gp23 in regulating polymerization, and force a reappraisal of models of capsid swelling based on the swivelling of conserved domains.

Molecular architecture of bacteriophage T7 capsid.

To determine the capsid structure of bacteriophage T7, we have investigated polycapsids, tubular capsid-related structures isolated from lysates of the T7 mutant am16. Biochemical analysis shows polycapsids to be composed of gp10, the major structural protein of the wild-type capsid. The conformational state of gp10 in polycapsids is indistinguishable from that in the mature virus capsid by the criteria of surface charge, buoyant density, and insensitivity to proteolysis by trypsin. Optical diffraction of electron micrographs of negatively stained polycapsids reveals a hexagonal surface lattice of periodicity 12.6 +/- 0.2 nm and is used to analyze the distribution of cylindrical foldings of this lattice into polycapsids (polymorphic variation). These foldings are found to be related to that of the capsid proper through the intrinsic curvature of gp10, each folding having a set of lattice lines whose radius of curvature is close to 29 nm. The fine structure of this surface lattice has been elucidated by digital image processing of electron micrographs. The capsomer is shown unequivocally to be a hexamer of characteristic morphology. By collating these results with earlier observations, we conclude that the structure of the normal T7 capsid is an orthodox icosahedron of triangulation class T = 7, composed of 60 hexamers and 12 pentamers.