Application of FRET Microscopy to the Study of the Local Environment and Dynamics of DNA SAMs on Au Electrodes.

Immobilized DNA probe strands self-assembled on an electrode surface are the bases of many electrochemically based biosensors. Control or measurement of the local environment around each DNA molecule tethered to the electrode surface is needed because the local environment can influence the binding or hybridization efficiency of the target in solution. Measurement of this local environment in buffer or under electrochemical control can be challenging. Here we demonstrate the use of fluorescence microscopy and a Förster resonance energy transfer (FRET) methodology to characterize multicomponent DNA SAMs. The DNA SAMs that were studied were composed of a series of mole fraction ratios of alkylthiol-modified DNA which was labeled with either AlexaFluor488 or AlexaFluor647, a FRET donor and acceptor, respectively. The DNA SAMs were hybridized before assembly onto the electrode surface. Wide-field filter-based FRET microscopy was used to study the assembly of DNA SAMs onto gold bead electrodes. These single-crystal gold bead electrodes contain many surface crystallographic regions which enable the comparison of the adsorbed DNA local environment. These surfaces show that most surface modifications are uniformly prepared, and the FRET efficiency can be explained through simple surface density considerations. The FRET efficiency for different compositions of the donor and acceptor for these regions is also explained through 2D FRET modeling. Not all surfaces were similar to the (111) and (110) regions showing deviations from the expected FRET behavior. Also demonstrated is FRET imaging using a confocal microscope. This approach proves useful in the analysis of a more dynamic system, such as the analysis of reductive desorption of the mixed-component DNA SAM. FRET microscopy is useful for surface analysis of the DNA local environment, enabling a measure of the surface modification, local density, and clustering and eventually a new detection modality.

Open microwave cavity for use in a Purcell enhancement cooling scheme.

A microwave cavity is described which can be used to cool lepton plasmas for potential use in synthesis of antihydrogen. The cooling scheme is an incarnation of the Purcell effect: when plasmas are coupled to a microwave cavity, the plasma cooling rate is resonantly enhanced through increased spontaneous emission of cyclotron radiation. The cavity forms a three electrode section of a Penning-Malmberg trap and has a bulged cylindrical geometry with open ends aligned with the magnetic trapping axis. This allows plasmas to be injected and removed from the cavity without the need for moving parts while maintaining high quality factors for resonant modes. The cavity includes unique surface preparations for adjusting the cavity quality factor and achieving anti-static shielding using thin layers of nichrome and colloidal graphite, respectively. Geometric design considerations for a cavity with strong cooling power and low equilibrium plasma temperatures are discussed. Cavities of this weak-bulge design will be applicable to many situations where an open geometry is required.

A method for determining the actual rate of orientation switching of DNA self-assembled monolayers using optical and electrochemical frequency response analysis.

Electrostatic control of the orientation of fluorophore-labeled DNA strands immobilized on an electrode surface has been shown to be an effective bioanalytical tool. Modulation techniques and later time-resolved measurements were used to evaluate the kinetics of the switching between lying and standing DNA conformations. These measurements, however, are the result of a convolution between the DNA "switching" response time and the other frequency limited responses in the measurement. In this work, a method for analyzing the response of a potential driven DNA sensor is presented by calculating the potential effectively dropped across the electrode interface (using electrochemical impedance spectroscopy) as opposed to the potential applied to the electrochemical cell. This effectively deconvolutes the effect of the charging time on the observed frequency response. The corrected response shows that DNA is able to switch conformation faster than previously reported using modulation techniques. This approach will ensure accurate measurements independent of the electrochemical system, removing the uncertainty in the analysis of the switching response, enabling comparison between samples and measurement systems.

Synthesis and characterization of diverse Pt nanostructures in Nafion.

With the aid of TEM characterization, we describe two distinct Pt nanostructures generated via the electroless reduction of Pt(NH3)4(NO2)2 within Nafion. Under one set of conditions, we produce bundles of Pt nanorods that are 2 nm in diameter and 10-20 nm long. These bundled Pt nanorods, uniformly distributed within 5 µm of the Nafion surface, are strikingly similar to the proposed hydrated nanomorphology of Nafion, and therefore strongly suggestive of Nafion templating. By altering the reaction environment (pH, reductant strength, and Nafion hydration), we can also generate nonregular polyhedron Pt nanoparticles that range in size from a few nanometers in diameter up to 20 nm. These Pt nanoparticles form a dense Pt layer within 100-200 nm from the Nafion surface and show a power-law dependence of particle size and distribution on the distance from the Nafion membrane surface. Control over the distribution and the type of Pt nanostructures in the surface region may provide a cost-effective, simple, and scaleable pathway for enhancing manufacturability, activity, stability, and utilization efficiency of Pt catalysts for electrochemical devices.

A methodology for investigating new nonprecious metal catalysts for PEM fuel cells.

This paper reports an approach to investigate metal-chalcogen materials as catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane (PEM) fuel cells. The methodology is illustrated with reference to Co-Se thin films prepared by magnetron sputtering onto a glassy-carbon substrate. Scanning Auger microscopy (SAM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) have been used, in parallel with electrochemical activity and stability measurements, to assess how the electrochemical performance relates to chemical composition. It is shown that Co-Se thin films with varying Se are active for oxygen reduction, although the open circuit potential (OCP) is lower than for Pt. A kinetically controlled process is observed in the potential range 0.5-0.7 V (vs reversible hydrogen electrode) for the thin-film catalysts studied. An initial exposure of the thin-film samples to an acid environment served as a pretreatment, which modified surface composition prior to activity measurements with the rotating disk electrode (RDE) method. Based on the SAM characterization before and after electrochemical tests, all surfaces demonstrating activity are dominated by chalcogen. XRD shows that the thin films have nanocrystalline character that is based on a Co(1-x)Se phase. Parallel studies on Co-Se powder supported on XC72R carbon show comparable OCP, Tafel region, and structural phase as for the thin-film model catalysts. A comparison for ORR activity has also been made between this Co-Se powder and a commercial Pt catalyst.

Amphotericin B interactions with a DOPC monolayer. Electrochemical investigations.

A model lipid membrane consisting of a monolayer of dioleoyl phosphatidylcholine (DOPC) adsorbed onto a Hg electrode has been used to study the interaction between the lipid and different formulations of Amphotericin B (AmB) [Fungizone (FZ), Heated Fungizone (HFZ), and Abelcet]. The lipid organizational order was measured by electrochemical methods [capacitance and metal ion (Tl(+)) reduction], characterizing the change in lipid order due to interaction with the drug. The mean size and number density of pores formed in the monolayer were estimated by fitting the reduction current transients to a random array of microelectrode model. This method was shown sensitive for investigation of the interaction of drugs with the DOPC monolayer. Abelcet was found to have a smaller disruptive effect on lipid order than FZ and HFZ. The formulations used to solubilize the AmB were also studied. Sodium deoxycholate used as a solubilizer in FZ displayed significant influence on lipid order similar to that observed for Abelcet. The lipid complex, used in Abelcet, did not significantly perturb the DOPC monolayer order. The lipid complex used in Abelcet may have an annealing or healing effect that buffers the disruption possible due to AmB.

[Influence of hydrocortisone on the response to noradrenaline of segments of isolated coronary arteries in the presence of a beta-adrenergic blocking agent]. / Influenza dell'idrocortisone sulle risposte alla noradrenalina di segmenti di arterie coronarie isolate in presenza di un bloccante beta-adrenergico.

The effect of hydrocortisone on the noradrenaline-induces contraction, after propranolol, was studied in vitro. Contraction of response to noradrenaline were increased by hydrocortisone. We suggest that the hydrocortisone influence depends on inhibition of catecol-O-metiltransferase (COMT).