Fibre Optic Sensor for Characterisation of Lithium-Ion Batteries.

The interaction between a fibre optic evanescent wave sensor and the positive electrode material, lithium iron phosphate, in a battery cell is presented. The optical-electrochemical combination was investigated in a reflection-based and a transmission-based configuration, both leading to comparable results. Both constant current cycling and cyclic voltammetry were employed to link the optical response to the charge and discharge of the battery cells, and the results demonstrated that the optical signal changed consistently with lithium ion insertion and extraction. More precisely, cyclic voltammetry showed that the intensity increased when iron was oxidised during charge and then decreased as iron was reduced during discharge. Cyclic voltammetry also revealed that the optical signal remained unchanged when essentially no oxidation or reduction of the electrode material took place. This shows that optical fibre sensors may be used as a way of monitoring state of charge and electrode properties under dynamic conditions.

DPPTE Thiolipid Self-Assembled Monolayer: A Critical Assay.

Supported lipid membranes represent an elegant way to design a fluid interface able to mimic the physicochemical properties of biological membranes, with potential biotechnological applications. In this work, a diacyl phospholipid, the 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol (DPPTE), functionalized with a thiol group, was immobilized on a gold surface. In this molecule, the thiol group, responsible for the Au-S bond (45 kJ/mol) is located on the phospholipid polar head, letting the hydrophobic chain protrude from the film. This system is widely used in the literature but is no less challenging, since its characterization is not complete, as several discordant data have been obtained. In this work, the film was characterized by cyclic voltammetry blocking experiments, to verify the SAM formation, and by reductive desorption measurements, to estimate the molecular density of DPPTE on the gold surface. This value has been compared to that obtained by quartz crystal microbalance measurements. Ellipsometry and impedance spectroscopy measurements have been performed to obtain information about the monolayer thickness and capacitance. The film morphology was investigated by atomic force microscopy. Finally, Monte Carlo simulations were carried out, in order to gain molecular information about the morphologies of the DPPTE SAM and compare them to the experimental results. We demonstrate that DPPTE molecules, incubated 18 h below the phase transition temperature (T = 41.1 ± 0.4 °C) in ethanol solution, are able to form a self-assembled monolayer on the gold surface, with domain structures of different order, which have never been reported before. Our results make possible rationalization of the scattered results so far obtained on this system, giving a new insight into the formation of phospholipids SAMs on a gold surface.

SEI Formation and Interfacial Stability of a Si Electrode in a LiTDI-Salt Based Electrolyte with FEC and VC Additives for Li-Ion Batteries.

An electrolyte based on the new salt, lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide (LiTDI), is evaluated in combination with nano-Si composite electrodes for potential use in Li-ion batteries. The additives fluoroethylene carbonate (FEC) and vinylene carbonate (VC) are also added to the electrolyte to enable an efficient SEI formation. By employing hard X-ray photoelectron spectroscopy (HAXPES), the SEI formation and the development of the active material is probed during the first 100 cycles. With this electrolyte formulation, the Si electrode can cycle at 1200 mAh g(-1) for more than 100 cycles at a coulombic efficiency of 99%. With extended cycling, a decrease in Si particle size is observed as well as an increase in silicon oxide amount. As opposed to LiPF6 based electrolytes, this electrolyte or its decomposition products has no side reactions with the active Si material. The present results further acknowledge the positive effects of SEI forming additives. It is suggested that polycarbonates and a high LiF content are favorable components in the SEI over other kinds of carbonates formed by ethylene carbonate (EC) and dimethyl carbonate (DMC) decomposition. This work thus confirms that LiTDI in combination with the investigated additives is a promising salt for Si electrodes in future Li-ion batteries.

Investigation of an Electrochemical Method for Separation of Copper, Indium, and Gallium from Pretreated CIGS Solar Cell Waste Materials.

Recycling of the semiconductor material copper indium gallium diselenide (CIGS) is important to ensure a future supply of indium and gallium, which are relatively rare and therefore expensive elements. As a continuation of our previous work, where we recycled high purity selenium from CIGS waste materials, we now show that copper and indium can be recycled by electrodeposition from hydrochloric acid solutions of dissolved selenium-depleted material. Suitable potentials for the reduction of copper and indium were determined to be -0.5 V and -0.9 V (versus the Ag/AgCl reference electrode), respectively, using cyclic voltammetry. Electrodeposition of first copper and then indium from a solution containing the dissolved residue from the selenium separation and ammonium chloride in 1 M HCl gave a copper yield of 100.1 ± 0.5% and an indium yield of 98.1 ± 2.5%. The separated copper and indium fractions contained no significant contamination of the other elements. Gallium remained in solution together with a small amount of indium after the separation of copper and indium and has to be recovered by an alternative method since electrowinning from the chloride-rich acid solution was not effective.

Properties of screen printed electrocardiography smartware electrodes investigated in an electro-chemical cell.

BACKGROUND: ECG (Electrocardiogram) measurements in home health care demands new sensor solutions. In this study, six different configurations of screen printed conductive ink electrodes have been evaluated with respect to electrode potential variations and electrode impedance. METHODS: The electrode surfaces consisted of a Ag/AgCl-based ink with a conduction line of carbon or Ag-based ink underneath. On top, a lacquer layer was used to define the electrode area and to cover the conduction lines. Measurements were performed under well-defined electro-chemical conditions in a physiologic saline solution. RESULTS: The results showed that all printed electrodes were stable and have a very small potential drift (less than 3 mV/30 min). The contribution to the total impedance was 2% of the set maximal allowed impedance (maximally 1 kΩ at 50 Hz), assuming common values of input impedance and common mode rejection ratio of a regular amplifier. CONCLUSION: Our conclusions are that the tested electrodes show satisfying properties to be used as elements in a skin electrode design that could be suitable for further investigations by applying the electrodes on the skin.

Evaluation of industrial cutting fluids using electrochemical impedance spectroscopy and multivariate data analysis.

In this paper we explore the combination of electrochemical impedance spectroscopy (EIS) and multivariate data analysis to evaluate the concentration and pH of an industrial cutting fluid. These parameters are vital for the performance of for instance tooling processes, and an on-line quality monitoring system would in such applications be very beneficial. It is shown that both the total impedance and the phase angle contain information that allows the simultaneous discrimination of the concentration and the pH. The final evaluation was conducted using the regression technique partial least squares (PLS), and this approach provided a way to quickly and easily find the correlation between EIS data and the sought parameters. The possibility to estimate both the concentration and pH level clearly indicates the potential of this method to be implemented for on-line evaluation.

Long-chain alkylthiol assemblies containing buried in-plane stabilizing architectures.

A series of alkylthiol compounds were synthesized to study the formation and structure of complex self-assembled monolayers (SAMs) consisting of interchanging structural modules stabilized by intermolecular hydrogen bonds. The chemical structure of the synthesized compounds, HS(CH(2))(15)CONH(CH(2)CH(2)O)(6)CH(2)CONH-X, where X refers to the extended chains of either -(CH(2))(n)CH(3) or -(CD(2))(n)CD(3), with n = 0, 1, 7, 8, 15, was confirmed by NMR and elemental analysis. The formation of highly ordered, methyl-terminated SAMs on gold from diluted ethanolic solutions of these compounds was revealed using contact angle goniometry, null ellipsometry, cyclic voltammetry, and infrared reflection absorption spectroscopy. The experimental work was complemented with extensive DFT modeling of infrared spectra and molecular orientation. New assignments were introduced for both nondeuterated and deuterated compounds. The latter set of compounds also served as a convenient tool to resolve the packing, conformation, and orientation of the buried and extended modules within the SAM. Thus, it was shown that the lower alkyl portion together with the hexa(ethylene glycol) portion is stabilized by the two layers of lateral hydrogen bonding networks between the amide groups, and they provide a structurally robust support for the extended alkyls. The presented system can be considered to be an extension of the well-known alkyl SAM platform, enabling precise engineering of nanoscopic architectures on the length scale from a few to approximately 60 A for applications such as cell membrane mimetics, molecular nanolithography, and so forth.

Potential and current density distributions at electrodes intended for bipolar patterning.

This paper deals with the use of reaction gradients on bipolar electrodes for the patterning of electrode surfaces.More specifically, the potential and current density distributions in two setups containing bipolar electrodes were investigated to optimize and design specific gradient geometries. Comparisons with simulations based on simple conductivity models showed a good qualitative agreement, demonstrating that these models could be used to predict bipolar behavior in more complex setups. In conjunction with imaging surface plasmon resonance(iSPR) experiments, the reaction gradients on bipolar electrodes could further be visualized. It was, for example,found that the gradient in potential difference was approximately linearly distributed in the center of the bipolar electrode and that these potential differences could be determined using an ordinary Ag/AgCl reference electrode.The present results thus provide a better understanding of the processes relevant for bipolar patterning.This approach was finally used to generate a circular gradient region in a self-assembled monolayer, thereby showing the possibilities to create interesting substrates for biosensors and microarray applications.

Self-arrangement among charge-stabilized gold nanoparticles on a dithiothreitol reactivated octanedithiol monolayer.

Gold surfaces and structures modified with octanedithiol were reacted with dithiothreitol prior to immersion in buffered solutions of charge stabilized gold nanoparticles. The procedure gives a dithiol layer with adequate properties for a homogeneous octanedithiol monolayer and uniform and reproducible gold nanoparticle binding. The distance between the adsorbing particles is controlled by the particle electrostatic interactions and can be carefully tuned by variation of ionic strength. To some extent, long-range ordering occurs among the adsorbed particles. This behavior is facilitated by the particles' small size compared to the Debye screening but also by the homogeneity of the surface modification. The simple character of the system makes it attractive for fabrication of controlled nanoparticle arrays where further chemical and biological modifications are required.

Folding induced assembly of polypeptide decorated gold nanoparticles.

Reversible assembly of gold nanoparticles controlled by the homodimerization and folding of an immobilized de novo designed synthetic polypeptide is described. In solution at neutral pH, the polypeptide folds into a helix-loop-helix four-helix bundle in the presence of zinc ions. When immobilized on gold nanoparticles, the addition of zinc ions induces dimerization and folding between peptide monomers located on separate particles, resulting in rapid particle aggregation. The particles can be completely redispersed by removal of the zinc ions from the peptide upon addition of EDTA. Calcium ions, which do not induce folding in solution, have no effect on the stability of the peptide decorated particles. The contribution from folding on particle assembly was further determined utilizing a reference peptide with the same primary sequence but containing both D and L amino acids. Particles functionalized with the reference peptide do not aggregate, as the peptides are unable to fold. The two peptides, linked to the nanoparticle surface via a cysteine residue located in the loop region, form submonolayers on planar gold with comparable properties regarding surface density, orientation, and ability to interact with zinc ions. These results demonstrate that nanoparticle assembly can be induced, controlled, and to some extent tuned, by exploiting specific molecular interactions involved in polypeptide folding.

Electrochemical impedance spectroscopy for investigations on ion permeation in omega-functionalized self-assembled monolayers.

Electrochemical impedance spectroscopy was employed to explore the possibility of relating the permeation of electrolyte ions in omega-functionalized self-assembled monolayers to structural or polarity changes induced by interaction with metal ions. The monolayers were based on alkanethiols modified with a phosphorylated tyrosine analogue, which from previous work are known to drastically change their organization on gold surfaces upon interaction with aluminum and magnesium ions. The ion permeation was evaluated by using relatively low excitation frequencies, 1000 to 2 Hz, and quantified by an extra resistive component in the equivalent circuit (RSAM). The extent of ion permeation influenced by the dc potential, the electrolyte concentration, the functional group, and the thiol length were also investigated. It was, for example, found that RSAM decreased approximately 20% when the thiol organization collapsed and that RSAM increased approximately 4-5 times when the electrolyte concentration was decreased by 1 order of magnitude. Interesting observations were also made regarding the potential dependence of RSAM and the double layer capacitance. The evaluation of the ion permeation can be used to indirectly detect whether the organization of a SAM is influenced by, for example, electric fields or chemical and biological interactions. This analysis can be performed without addition of redox species, but is on the other hand complicated by the fact that other factors also influence the presence of ions within the monolayer. In addition, a second parallel RC process was obtained in some of the impedance spectra when using even lower frequencies, and its resistive component revealed different results compared to RSAM. Such data may be useful for the understanding of complex double layer phenomena at modified electrodes.

Metal ion interaction with phosphorylated tyrosine analogue monolayers on gold.

Phosphorylated tyrosine analogue molecules (pTyr-PT) were assembled onto gold substrates, and the resulting monolayers were used for metal ion interaction studies. The monolayers were characterized by X-ray photoelectron spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRAS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), both prior to and after exposure to metal ions. XPS verified the elemental composition of the molecular adsorbate and the presence of metal ions coordinated to the phosphate groups. Both the angle-dependent XPS and IRAS results were consistent with the change in the structural orientation of the pTyr-PT monolayer upon exposure to metal ions. The differential capacitance of the monolayers upon coordination of the metal ions was evaluated using EIS. These metal ions were found to significantly change the capacitance of the pTyr-PT monolayers in contrast to the nonphosphorylated tyrosine analogue (TPT). CV results showed reduced electrochemical blocking capabilities of the phosphorylated analogue monolayer when exposed to metal ions, supporting the change in the structure of the monolayer observed by XPS and IRAS. The largest change in the structure and interfacial capacitance was observed for aluminum ions, compared to calcium, magnesium, and chromium ions. This type of monolayer shows an excellent capability to coordinate metal ions and has a high potential for use as sensing layers in biochip applications to monitor the presence of metal ions.

Structural and kinetic properties of laterally stabilized, oligo(ethylene glycol)-containing alkylthiolates on gold: a modular approach.

The formation of highly ordered self-assembled monolayers (SAMs) on gold from an unusually long and linear compound HS(CH(2))(15)CONH(CH(2)CH(2)O)(6)CH(2)CONH(CH(2))(15)CH(3) is investigated by contact angle goniometry, ex situ null ellipsometry, cyclic voltammetry and infrared reflection-absorption spectroscopy. The molecules are found to assemble in an upright position as a complete monolayer within 60 min. The overall structure of the SAM reaches equilibrium within 24 h as evidenced by infrared spectroscopy, although a slight improvement in water contact angles is observed over a period of a few weeks. The resulting SAM is 60 A thick and it displays an advancing water contact angle of 112 degrees and excellent electrochemical blocking characteristics with typical current densities about 20 times lower as compared to those observed for HS(CH(2))(15)CH(3) SAMs. The dominating crystalline phases of the supporting HS(CH(2))(15) and terminal (CH(2))(15)CH(3) alkyl portions, as well as the sealed oligo(ethylene glycol) (OEG) "core," appear as unusually sharp features in the infrared spectra at room temperature. For example, the splitting seen for the CH(3) stretching and CH(2) scissoring peaks is normally only observed for conformationally trapped alkylthiolate SAMs at low temperatures and for highly crystalline polymethylenes. Temperature-programmed infrared spectroscopy in ultrahigh vacuum reveals a significantly improved thermal stability of the SAM under investigation, as compared to two analogous OEG derivatives without the extended alkyl chain. Our study points out the advantages of adopting a "modular approach" in designing novel SAM-forming compounds with precisely positioned in plane stabilizing groups. We demonstrate also the potential of using the above set of compounds in the fabrication of "hydrogel-like" arrays with controlled wetting properties for application in the ever-growing fields of protein and cell analysis, as well as for bioanalytical applications.

Monitoring the interfacial capacitance at self-assembled phosphate monolayers on gold electrodes upon interaction with calcium and magnesium.

Electrochemical impedance spectroscopy has been used to evaluate the change in interfacial capacitance upon calcium and magnesium coordination to a phosphate-modified electrode. The phosphate electrode was prepared via immobilization of phosphorylated, thiol-containing, serine analogues onto gold. Upon subjection to calcium and magnesium, a substantial drop in capacitance was observed. Magnesium displayed the largest influence on the capacitance: a 27% capacitance drop was observed upon introduction of a 1 mM solution of magnesium ions. The lowered capacitance is a result of a change in the potential and charge distribution at the film/electrolyte interface as the cations coordinate to the phosphate groups. Moreover, the relationship between electrode potential and capacitance has been investigated and reveals a significant difference between monovalent and divalent cations. As complementary information, infrared reflection absorption spectra of the phosphorylated monolayer having different counterions are presented. The results reported in this paper indicate that the phosphorylated amino acid analogue monolayers could be used in investigations of the biochemically important coordination of calcium and magnesium to phosphates and phosphorylated amino acids.