Watch-sized 12 Tesla all-high-temperature-superconducting magnet.

We demonstrate the construction of 7 Tesla and 12 Tesla all high-temperature-superconducting (HTS) magnets, small enough to fit on your wrist. The size of the magnet reduces the cost of fabrication, decreases the fringe field to permit facile siting of magnets, and decreases the stored energy of high field magnets. These small HTS-based magnets are being developed for gyrotron microwave sources for use in high-field nuclear magnetic resonance applications. The 7 Tesla and 12 Tesla magnets employ a no-insulation winding technique and are cooled to 4.2 Kelvin in a liquid helium cryostat. The 7 Tesla magnet is a single pancake coil, made of only 9.4 m of HTS tape, with an inner diameter of 8 mm and an outer diameter of 24 mm. This magnet was charged up to 1168 Amperes, generating a field of 7.3 Tesla. The 12 Tesla magnet is comprised of two pancake coils (inner diameter of 10 mm and outer diameter of 27 mm) connected in series. This magnet reached its maximum field at a current of 850 Amperes.

Nature of GaOx Shells Grown on Silica by Atomic Layer Deposition.

Gallia-based shells with a thickness varying from a submonolayer to ca. 2.5 nm were prepared by atomic layer deposition (ALD) using trimethylgallium, ozone, and partially dehydroxylated silica, followed by calcination at 500 °C. Insight into the atomic-scale structure of these shells was obtained by high-field 71Ga solid-state nuclear magnetic resonance (NMR) experiments and the modeling of X-ray differential pair distribution function data, complemented by Ga K-edge X-ray absorption spectroscopy and 29Si dynamic nuclear polarization surface enhanced NMR spectroscopy (DNP SENS) studies. When applying one ALD cycle, the grown submonolayer contains mostly tetracoordinate Ga sites with Si atoms in the second coordination sphere ([4]Ga(Si)) and, according to 15N DNP SENS using pyridine as the probe molecule, both strong Lewis acid sites (LAS) and strong Brønsted acid sites (BAS), consistent with the formation of gallosilicate Ga-O-Si and Ga-µ2-OH-Si species. The shells obtained using five and ten ALD cycles display characteristics of amorphous gallia (GaOx), i.e., an increased relative fraction of pentacoordinate sites ([5]Ga(Ga)), the presence of mild LAS, and a decreased relative abundance of strong BAS. The prepared Ga1-, Ga5-, and Ga10-SiO2-500 materials catalyze the dehydrogenation of isobutane to isobutene, and their catalytic performance correlates with the relative abundance and strength of LAS and BAS, viz., Ga1-SiO2-500, a material with a higher relative fraction of strong LAS, is more active and stable compared to Ga5- and Ga10-SiO2-500. In contrast, related ALD-derived Al1-, Al5-, and Al10-SiO2-500 materials do not catalyze the dehydrogenation of isobutane and this correlates with the lack of strong LAS in these materials that instead feature abundant strong BAS formed via the atomic-scale mixing of Al sites with silica, leading to Al-µ2-OH-Si sites. Our results suggest that [4]Ga(Si) sites provide strong Lewis acidity and drive the dehydrogenation activity, while the appearance of [5]Ga(Ga) sites with mild Lewis activity is associated with catalyst deactivation through coking. Overall, the atomic-level insights into the structure of the GaOx-based materials prepared in this work provide a guide to design active Ga-based catalysts by a rational tailoring of Lewis and Brønsted acidity (nature, strength, and abundance).

Active Site Descriptors from 95Mo NMR Signatures of Silica-Supported Mo-Based Olefin Metathesis Catalysts.

The olefin metathesis activity of silica-supported molybdenum oxides depends strongly on metal loading and preparation conditions, indicating that the nature and/or amounts of the active sites vary across compositionally similar catalysts. This is illustrated by comparing Mo-based (pre)catalysts prepared by impregnation (2.5-15.6 wt % Mo) and a model material (2.3 wt % Mo) synthesized via surface organometallic chemistry (SOMC). Analyses of FTIR, UV-vis, and Mo K-edge X-ray absorption spectra show that these (pre)catalysts are composed predominantly of similar isolated Mo dioxo sites. However, they exhibit different reaction properties in both liquid and gas-phase olefin metathesis with the SOMC-derived catalyst outperforming a classical catalyst of a similar Mo loading by ×1.5-2.0. Notably, solid-state 95Mo NMR analyses leveraging state-of-the-art high-field (28.2 T) measurement conditions resolve four distinct surface Mo dioxo sites with distributions that depend on the (pre)catalyst preparation methods. The intensity of a specific deshielded 95Mo NMR signal, which is most prominent in the SOMC-derived catalyst, is linked to reducibility and catalytic activity. First-principles calculations show that 95Mo NMR parameters directly manifest the local strain and coordination environment: acute (SiO-Mo(O)2-OSi) angles and low coordination numbers at Mo lead to highly deshielded 95Mo chemical shifts and small quadrupolar coupling constants, respectively. Natural chemical shift analyses relate the 95Mo NMR signature of strained species to low LUMO energies, which is consistent with their high reducibility and corresponding reactivity. The 95Mo chemical shifts of supported Mo dioxo sites are thus linked to their specific electronic structures, providing a powerful descriptor for their propensity toward reduction and formation of active sites.

Solid-State NMR Spectra of Protons and Quadrupolar Nuclei at 28.2 T: Resolving Signatures of Surface Sites with Fast Magic Angle Spinning.

Advances in solid-state nuclear magnetic resonance (NMR) methods and hardware offer expanding opportunities for analysis of materials, interfaces, and surfaces. Here, we demonstrate the application of a very high magnetic field strength of 28.2 T and fast magic-angle-spinning rates (MAS, >40 kHz) to surface species relevant to catalysis. Specifically, we present as case studies the 1D and 2D solid-state NMR spectra of important catalyst and support materials, ranging from a well-defined silica-supported organometallic catalyst to dehydroxylated γ-alumina and zeolite solid acids. The high field and fast-MAS measurement conditions substantially improve spectral resolution and narrow NMR signals, which is particularly beneficial for solid-state 1D and 2D NMR analysis of 1H and quadrupolar nuclei such as 27Al at surfaces.

1H Detected Relayed Dynamic Nuclear Polarization.

Recently, it has been shown that methods based on the dynamics of 1H nuclear hyperpolarization in magic angle spinning (MAS) NMR experiments can be used to determine mesoscale structures in complex materials. However, these methods suffer from low sensitivity, especially since they have so far only been feasible with indirect detection of 1H polarization through dilute heteronuclei such as 13C or 29Si. Here we combine relayed-DNP (R-DNP) with fast MAS using 0.7 mm diameter rotors at 21.2 T. Fast MAS enables direct 1H detection to follow hyperpolarization dynamics, leading to an acceleration in experiment times by a factor 16. Furthermore, we show that by varying the MAS rate, and consequently modulating the 1H spin diffusion rate, we can record a series of independent R-DNP curves that can be analyzed jointly to provide an accurate determination of domain sizes. This is confirmed here with measurements on microcrystalline l-histidine·HCl·H2O at MAS frequencies up to 60 kHz, where we determine a Weibull distribution of particle sizes centered on a radius of 440 ± 20 nm with an order parameter of k = 2.2.

Colloidal-ALD-Grown Hybrid Shells Nucleate via a Ligand-Precursor Complex.

Colloidal atomic layer deposition (c-ALD) enables the growth of hybrid organic-inorganic oxide shells with tunable thickness at the nanometer scale around ligand-functionalized inorganic nanoparticles (NPs). This recently developed method has demonstrated improved stability of NPs and of their dispersions, a key requirement for their application. Nevertheless, the mechanism by which the inorganic shells form is still unknown, as is the nature of multiple complex interfaces between the NPs, the organic ligands functionalizing the surface, and the shell. Here, we demonstrate that carboxylate ligands are the key element that enables the synthesis of these core-shell structures. Dynamic nuclear polarization surface-enhanced nuclear magnetic resonance spectroscopy (DNP SENS) in combination with density functional theory (DFT) structure calculations shows that the addition of the aluminum organometallic precursor forms a ligand-precursor complex that interacts with the NP surface. This ligand-precursor complex is the first step for the nucleation of the shell and enables its further growth.

Bulk Hyperpolarization of Inorganic Materials.

Solid-state NMR spectroscopy is a well-established method to obtain atomic-level information about the structure of inorganic materials, but its use is often limited by low sensitivity. We review how solvent generated dynamic nuclear polarization can be used to increase sensitivity in solid-state NMR of inorganic materials, with emphasis on our recent method for hyperpolarization of proton-free bulk. We use selected examples to show how overall gains in sensitivity can be observed in both the surface and bulk spectra of inorganic compounds such as lithium titanate. The hyperpolarization methods reviewed here can be used to improve NMR sensitivity for a range of inorganic materials.

High Sensitivity Detection of a Solubility Limiting Surface Transformation of Drug Particles by DNP SENS.

We investigate the presence of a surface species for the active pharmaceutical ingredient (API) AZD9496 with dynamic nuclear polarization surface enhanced nuclear spectroscopy (DNP SENS). We show that using DNP we can elucidate the presence of an amorphous form of the API at the surface of crystalline particles of the salt form. The amorphous form of the API has distinguishable 13C chemical shifts when compared to the salt form under various acidic conditions. The predominant form in frozen particles of AZD9496 is the salt, and we provide evidence to suggest that the amorphous layer at the surface is mainly made up of the dissociated free form.

A Magic Angle Spinning Activated 17O DNP Raser.

In the raser effect, a sample spontaneously emits continuous radiofrequency radiation, allowing exceptionally narrow NMR line widths to be recorded without applying pulses. To achieve this phenomenon, a large negative magnetization must be induced, which we show here can be achieved for the 17O magnetization of isotopically labeled Gd-doped CeO2 using solid effect dynamic nuclear polarization (DNP), at high field and 110 K. This allows a 2 mHz line width to be measured, which is limited only by the magnetic field stability. The raser effect can be reversibly activated and deactivated by magic angle spinning (MAS), which modulates the nuclear spin coherence lifetime. The use of MAS DNP to enable the raser effect should be further applicable to other systems and nuclei.

Hyperpolarization transfer pathways in inorganic materials.

Dynamic nuclear polarization can be used to hyperpolarize the bulk of proton-free inorganic materials in magic angle spinning NMR experiments. The hyperpolarization is generated on the surface of the material with incipient wetness impregnation and from there it is propagated towards the bulk through homonuclear spin diffusion between weakly magnetic nuclei. This method can provide significant gains in sensitivity for MAS NMR spectra of bulk inorganic compounds, but the pathways of the magnetization transfer into the material have not previously been elucidated. Here we show how two-dimensional experiments can be used to study spin diffusion from the surface of a material towards the bulk. We find that hyperpolarization can be efficiently relayed from surface sites to multiple bulk sites simultaneously, and that the bulk sites also engage in rapid polarization exchange between themselves. We also show evidence that the surface peaks can exchange polarization between different sites in cases of disorder.

Dynamic Nuclear Polarization Enhancement of 200 at 21.15 T Enabled by 65 kHz Magic Angle Spinning.

Solid-state nuclear magnetic resonance under magic angle spinning (MAS) enhanced with dynamic nuclear polarization (DNP) is a powerful approach to characterize many important classes of materials, allowing access to previously inaccessible structural and dynamic parameters. Here, we present the first DNP MAS experiments using a 0.7 mm MAS probe, which allows us to reach spinning frequencies of 65 kHz, with microwave irradiation, at 100 K. At the highest magnetic field available for DNP today (21.1 T), we find that the polarizing agent HyTEK2 provides DNP enhancements as high as 200 at a spinning rate of 65 kHz at 100 K, and BDPA yields an enhancement of 106 under the same conditions. Fast spinning rates enable excellent DNP performance, but they also yield unprecedented 1H resolution under DNP conditions. We report well-resolved 1H-detected 1H-13C and 1H-15N correlation spectra of microcrystalline histidine·HCl·H2O.

Maximizing nuclear hyperpolarization in pulse cooling under MAS.

It has recently been shown how dynamic nuclear polarization can be used to hyperpolarize the bulk of proton-free solids. This is achieved by generating the polarization in a wetting phase, transferring it to nuclei near the surface and relaying it towards the bulk through homonuclear spin diffusion between weakly magnetic nuclei. Pulse cooling is a strategy to achieve this that uses a multiple contact cross-polarization sequence for bulk hyperpolarization. Here, we show how to maximize sensitivity using the pulse cooling method by experimentally optimizing pulse parameters and delays on a sample of powdered SnO2. To maximize sensitivity we introduce an approach where the magic angle spinning rate is modulated during the experiment: the CP contacts are carried out at a slow spin rate to benefit from faster spin diffusion, and the spin rate is then accelerated before detection to improve line narrowing. This method can improve the sensitivity of pulse cooling for 119Sn spectra of SnO2 by an additional factor of 3.5.

Bulk Nuclear Hyperpolarization of Inorganic Solids by Relay from the Surface.

NMR is a method of choice to determine structural and electronic features in inorganic materials, and has been widely used in the past, but its application is severely limited by its low relative sensitivity. We show how the bulk of proton-free inorganic solids can be hyperpolarized with a general strategy using impregnation dynamic nuclear polarization through homonuclear spin diffusion between low-γ nuclei. This is achieved either through direct hyperpolarization or with a pulse cooling cross-polarization method, transferring hyperpolarization from protons to heteronuclei at particle surfaces. We demonstrate a factor of 50 gain in overall sensitivity for the 119Sn spectrum of powdered SnO2, corresponding to an acceleration of a factor >2500 in acquisition times. The method is also shown for 31P spectra of GaP, 113Cd spectra of CdTe, and 29Si spectra of α-quartz.

DNP enhanced NMR with flip-back recovery.

DNP methods can provide significant sensitivity enhancements in magic angle spinning solid-state NMR, but in systems with long polarization build up times long recycling periods are required to optimize sensitivity. We show how the sensitivity of such experiments can be improved by the classic flip-back method to recover bulk proton magnetization following continuous wave proton heteronuclear decoupling. Experiments were performed on formulations with characteristic build-up times spanning two orders of magnitude: a bulk BDPA radical doped o-terphenyl glass and microcrystalline samples of theophylline, l-histidine monohydrochloride monohydrate, and salicylic acid impregnated by incipient wetness. For these systems, addition of flip-back is simple, improves the sensitivity beyond that provided by modern heteronuclear decoupling methods such as SPINAL-64, and provides optimal sensitivity at shorter recycle delays. We show how to acquire DNP enhanced 2D refocused CP-INADEQUATE spectra with flip-back recovery, and demonstrate that the flip-back recovery method is particularly useful in rapid recycling regimes. We also report Overhauser effect DNP enhancements of over 70 at 592.6 GHz/900 MHz.

Enabling electrochemical reduction of nitrogen to ammonia at ambient conditions through rational catalyst design.

Commercial design of a sustainable route for on-site production of ammonia represents a potential economic and environmental breakthrough. In an analogous process to the naturally occurring enzymatic mechanism, synthesis of ammonia could be achieved in an electrochemical cell, in which electricity would be used to reduce atmospheric nitrogen and water into ammonia at ambient conditions. To date, such a process has not been realized due to slow kinetics and low faradaic efficiencies. Although progress has been made in this regard, at present there exists no device that can produce ammonia efficiently from air and water at room temperature and ambient pressure. In this work, a scheme is presented in which electronic structure calculations are used to screen for catalysts that are stable, active and selective towards N2 electro-reduction to ammonia, while at the same time suppressing the competing H2 evolution reaction. The scheme is applied to transition metal nitride catalysts. The most promising candidates are the (100) facets of the rocksalt structures of VN and ZrN, which show promise of producing ammonia in high yield at low onset potentials.