Tissue Morphology and Antigenicity in Mouse and Rat Tibia: Comparing 12 Different Decalcification Conditions.

Conventional bone decalcification is a time-consuming process and is therefore unsuitable for clinical applications and time-limited research projects. Consequently, we compared the effect of four different decalcification solutions applied at three different temperatures, and assessed the rate of decalcification and the implications on tissue morphology and antigenicity of mouse and rat tibiae. Bones were decalcified with 10% ethylenediaminetetraacetic acid (EDTA), 10% formic acid, 5% hydrochloric acid, and 5% nitric acid at 4C, 25C, and 37C. Decalcification in both species was fastest in nitric acid at 37C and slowest in EDTA at 4C. Histological and immunohistochemical staining confirmed that the conventional protocols of EDTA at 4C and 25C remain the best option regarding the quality of tissue preservation. Whereas formic acid at 4C is a good alternative saving about 90% of the decalcification time, hydrochloric and nitric acids should be avoided particularly in case of rat tibia. By contrast, due to their smaller size, mouse tibiae had shorter decalcification times and tolerated higher temperatures and exposure to acids much better. In conclusion, this study demonstrated that depending on the specific research question and sample size, alternative decalcification methods could be used to decrease the time of decalcification while maintaining histological accuracy.

Melt Electrospun Bilayered Scaffolds for Tissue Integration of a Suture-Less Inflow Cannula for Rotary Blood Pumps.

Implantation of left ventricular assist devices typically requires cardiopulmonary bypass support, which is associated with postoperative complications. A novel suture-less inflow cannula, which can be implanted without bypass, uses mild myocardial compression to seal the interface, however, this may lead to necrosis of the myocardium. To circumvent this issue, a bilayered scaffold has been developed to promote tissue growth at the interface between cannula and myocardium. The bilayered scaffold consists of a silicone base layer, which mimics the seal, and a melt electrospun polycaprolactone scaffold to serve as a tissue integration layer. Biocompatibility of the bilayered scaffolds was assessed by analyzing cell viability, morphology, and metabolic activity of human foreskin fibroblasts cultured on the scaffolds for up to 14 days. There was no evidence of cytotoxicity and the cells adhered readily to the bilayered scaffolds, revealing a cell morphology characteristic of fibroblasts, in contrast to the low cell adhesion observed on flat silicone sheets. The rate of cell proliferation on the bilayered scaffolds rose over the 14-day period and was significantly greater than cells seeded on the silicone sheets. This study suggests that melt electrospun bilayered scaffolds have the potential to support tissue integration of a suture-less inflow cannula for cardiovascular applications. Furthermore, the method of fabrication described here and the application of bilayered scaffolds could also have potential uses in a diverse range of biomedical applications.

An Assessment of Cell Culture Plate Surface Chemistry for in Vitro Studies of Tissue Engineering Scaffolds.

The use of biopolymers as a three dimensional (3D) support structure for cell growth is a leading tissue engineering approach in regenerative medicine. Achieving consistent cell seeding and uniform cell distribution throughout 3D scaffold culture in vitro is an ongoing challenge. Traditionally, 3D scaffolds are cultured within tissue culture plates to enable reproducible cell seeding and ease of culture media change. In this study, we compared two different well-plates with different surface properties to assess whether seeding efficiencies and cell growth on 3D scaffolds were affected. Cell attachment and growth of murine calvarial osteoblast (MC3T3-E1) cells within a melt-electrospun poly-ε-caprolactone scaffold were assessed when cultured in either "low-adhesive" non-treated or corona discharged-treated well-plates. Increased cell adhesion was observed on the scaffold placed in the surface treated culture plates compared to the scaffold in the non-treated plates 24 h after seeding, although it was not significant. However, higher cell metabolic activity was observed on the bases of all well-plates than on the scaffold, except for day 21, well metabolic activity was higher in the scaffold contained in non-treated plate than the base. These results indicate that there is no advantage in using non-treated plates to improve initial cell seeding in 3D polymeric tissue engineering scaffolds, however non-treated plates may provide an improved metabolic environment for long-term studies.

Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control.

Direct writing melt electrospinning is an additive manufacturing technique capable of the layer-by-layer fabrication of highly ordered 3d tissue engineering scaffolds from micron-diameter fibers. The utility of these scaffolds, however, is limited by the maximum achievable height of controlled fiber deposition, beyond which the structure becomes increasingly disordered. A source of this disorder is charge build-up on the deposited polymer producing unwanted coulombic forces. In this study, the authors introduce a novel melt electrospinning platform with dual voltage power supplies to reduce undesirable charge effects and improve fiber deposition control. The authors produced and characterized several 90° cross-hatched fiber scaffolds using a range of needle/collector plate voltages. Fiber thickness was found to be sensitive only to overall potential and invariant to specific tip/collector voltage. The authors also produced ordered scaffolds up to 200 layers thick (fiber spacing 1 mm and diameter 40 µm) and characterized structure in terms of three distinct zones: ordered, semiordered, and disordered. Our in vitro analysis indicates successful cell attachment and distribution throughout the scaffolds, with little evidence of cell death after seven days. This study demonstrates the importance of electrostatic control for reducing destabilizing polymer charge effects and enabling the fabrication of morphologically suitable scaffolds for tissue engineering.

Method for estimating protein binding capacity of polymeric systems.

Composite biomaterials made from synthetic and protein-based polymers are extensively researched in tissue engineering. To successfully fabricate a protein-polymer composite, it is critical to understand how strongly the protein binds to the synthetic polymer, which occurs through protein adsorption. Currently, there is no cost-effective and simple method for characterizing this interfacial binding. To characterize this interfacial binding, we introduce a simple three-step method that involves: 1) synthetic polymer surface characterisation, 2) a quick, inexpensive and robust novel immuno-based assay that uses protein extraction compounds to characterize protein binding strength followed by 3) an in vitro 2D model of cell culture to confirm the results of the immuno-based assay. Fibrinogen, precursor of fibrin, was adsorbed (test protein) on three different polymeric surfaces: silicone, poly(acrylic acid)-coated silicone and poly(allylamine)-coated silicone. Polystyrene surface was used as a reference. Characterisation of the different surfaces revealed different chemistry and roughness. The novel immuno-based assay showed significantly stronger binding of fibrinogen to both poly(acrylic acid) and poly(allylamine) coated silicone. Finally, cell studies showed that the strength of the interaction between the protein and the polymer had an effect on cell growth. This novel immuno-based assay is a valuable tool in developing composite biomaterials of synthetic and protein-based polymers with the potential to be applied in other fields of research where protein adsorption onto surfaces plays an important role.

Melt-electrospun polycaprolactone strontium-substituted bioactive glass scaffolds for bone regeneration.

Polycaprolactone (PCL) is a resorbable polymer used extensively in bone tissue engineering owing to good structural properties and processability. Strontium-substituted bioactive glass (SrBG) has the ability to promote osteogenesis and may be incorporated into scaffolds intended for bone repair. Here, we describe for the first time, the development of a PCL-SrBG composite scaffold incorporating 10% (weight) of SrBG particles into PCL bulk, produced by the technique of melt electrospinning. We show that we are able to reproducibly manufacture composite scaffolds with an interconnected porous structure and, furthermore, these scaffolds were demonstrated to be noncytotoxic in vitro. Ions present in the SrBG component were shown to dissolve into cell culture media and promoted precipitation of a calcium phosphate layer on the scaffold surface which in turn led to noticeably enhanced alkaline phosphatase activity in MC3T3-E1 cells compared to PLC-only scaffolds. These results suggest that melt-electrospun PCL-SrBG composite scaffolds show potential to become effective bone graft substitutes.

Postproduction processing of electrospun fibres for tissue engineering.

Electrospinning is a commonly used and versatile method to produce scaffolds (often biodegradable) for 3D tissue engineering.(1, 2, 3) Many tissues in vivo undergo biaxial distension to varying extents such as skin, bladder, pelvic floor and even the hard palate as children grow. In producing scaffolds for these purposes there is a need to develop scaffolds of appropriate biomechanical properties (whether achieved without or with cells) and which are sterile for clinical use. The focus of this paper is not how to establish basic electrospinning parameters (as there is extensive literature on electrospinning) but on how to modify spun scaffolds post production to make them fit for tissue engineering purposes--here thickness, mechanical properties and sterilisation (required for clinical use) are considered and we also describe how cells can be cultured on scaffolds and subjected to biaxial strain to condition them for specific applications. Electrospinning tends to produce thin sheets; as the electrospinning collector becomes coated with insulating fibres it becomes a poor conductor such that fibres no longer deposit on it. Hence we describe approaches to produce thicker structures by heat or vapour annealing increasing the strength of scaffolds but not necessarily the elasticity. Sequential spinning of scaffolds of different polymers to achieve complex scaffolds is also described. Sterilisation methodologies can adversely affect strength and elasticity of scaffolds. We compare three methods for their effects on the biomechanical properties on electrospun scaffolds of poly lactic-co-glycolic acid (PLGA). Imaging of cells on scaffolds and assessment of production of extracellular matrix (ECM) proteins by cells on scaffolds is described. Culturing cells on scaffolds in vitro can improve scaffold strength and elasticity but the tissue engineering literature shows that cells often fail to produce appropriate ECM when cultured under static conditions. There are few commercial systems available that allow one to culture cells on scaffolds under dynamic conditioning regimes--one example is the Bose Electroforce 3100 which can be used to exert a conditioning programme on cells in scaffolds held using mechanical grips within a media filled chamber.(4) An approach to a budget cell culture bioreactor for controlled distortion in 2 dimensions is described. We show that cells can be induced to produce elastin under these conditions. Finally assessment of the biomechanical properties of processed scaffolds cultured with or without cells is described.

Developing biodegradable scaffolds for tissue engineering of the urethra.

OBJECTIVE: To develop a synthetic biodegradable alternative to using human allodermis for the production of tissue-engineered buccal mucosa for substitution urethroplasty, looking specifically at issues of sterilization and cell-seeding protocols and, comparing the results to native buccal mucosa. MATERIAL AND METHODS: Three methods of sterilization, peracetic acid (PAA), γ-irradiation and ethanol, were evaluated for their effects on a biodegradable electrospun scaffold of polylactide-co-glycolide (PLGA, 85:15), to identify a sterilization method with minimal adverse effects on the scaffolds. Two protocols for seeding oral cells on the scaffold were compared, co-culture of fibroblasts and keratinocytes on the scaffolds for 14 days, and seeding fibroblasts for 5 days then adding keratinocytes for a further 10 days. Cell viability and proliferation on the scaffolds, scaffold contraction and mechanical properties of the scaffolds with and without cells were examined. RESULTS: γ-irradiation and PAA sterilized scaffolds remained sterile for >3 months when incubated in antibiotic-free culture medium, while ethanol sterilized and unsterilized samples became infected within 2-14 days. All scaffolds showed extensive contraction (up to 50% over 14 days) irrespective of the method of sterilization or the presence of cells. All methods of sterilization, particularly ethanol, reduced the tensile strength of the scaffolds. The addition of cells tended to further reduce mechanical properties but increased elasticity. The cell-seeding protocol of adding fibroblasts for 5 days followed by keratinocytes for 10 days was the most promising, achieving a mean (sem) ultimate tensile stress of 1.20 (0.24) × 105 N/m² compared to 3.77 (1.05) × 105 N/m² for native buccal mucosa, and a Young's modulus of 2.40 (0.25) MPa, compared to 0.73 (0.09) MPa for the native buccal mucosa. CONCLUSION: This study adds to our understanding of how sterilization and cell seeding affect the physical properties of scaffolds. Both PAA and γ-irradiation appear to be suitable methods for sterilizing PLGA scaffolds, although both reduce the tensile properties of the scaffolds. Cells grow well on the sterilized scaffolds, and with our current protocol produce constructs which have ≈ 30% of the mechanical strength and elasticity of the native buccal mucosa. We conclude that sterilized PLGA 85:15 is a promising material for producing tissue-engineered buccal mucosa.

A novel route for the production of chitosan/poly(lactide-co-glycolide) graft copolymers for electrospinning.

Both chitosan and polylactide/polyglycolide have good biocompatibility and can be used to produce tissue engineering scaffolds for cultured cells. However the synthetic scaffolds lack groups that would facilitate their modification, whereas chitosan has extensive active amide and hydroxyl groups which would allow it to be subsequently modified for the attachment of peptides, proteins and drugs. Also chitosan is very hydrophilic, whereas PLGA is relatively hydrophobic. Accordingly there are many situations where it would be ideal to have a copolymer of both, especially one that could be electrospun to provide a versatile range of scaffolds for tissue engineering. Our aim was to develop a novel route of chitosan-g-PLGA preparation and evaluate the copolymers in terms of their chemical characterization, their performance on electrospinning and their ability to support the culture of fibroblasts as an initial biological evaluation of these scaffolds. Chitosan was first modified with trimethylsilyl chloride, and catalyzed by dimethylamino pyridine. PLGA-grafted chitosan copolymers were prepared by reaction with end-carboxyl PLGA (PLGA-COOH). FT-IR and(1)H-NMR characterized the copolymer molecular structure as being substantially different to that of the chitosan or PLGA on their own. Elemental analysis showed an average 18 pyranose unit intervals when PLGA-COOH was grafted into the chitosan molecular chain. Differential scanning calorimetry results showed that the copolymers had different thermal properties from PLGA and chitosan respectively. Contact angle measurements demonstrated that copolymers became more hydrophilic than PLGA. The chitosan-g-PLGA copolymers were electrospun to produce either nano- or microfibers as desired. A 3D fibrous scaffold of the copolymers gave good fibroblast adhesion and proliferation which did not differ significantly from the performance of the cells on the chitosan or PLGA electrospun scaffolds. In summary this work presents a methodology for making a hybrid material of natural and synthetic polymers which can be electrospun and reacts well as a substrate for cell culture.

Using poly(lactide-co-glycolide) electrospun scaffolds to deliver cultured epithelial cells to the cornea.

AIMS: To assess the potential of electrospun poly(lactide-co-glycolide) membranes to provide a biodegradable cell carrier system for limbal epithelial cells. MATERIAL & METHODS: 50:50 poly(lactide-co-glycolide) scaffolds were spun, sterilized and seeded with primary rabbit limbal epithelial cells. Cells were cultured on the scaffolds for 2 weeks and then examined by confocal microscopy, cryosectioning and scanning-electron microscopy. The tensile strength of scaffolds before and after annealing and sterilization was also studied. RESULTS: The limbal cells had formed a continuous multilayer of cells on either side of the scaffold. Scaffolds with cells showed signs of the onset of degradation within 2 weeks in culture media at 37 degrees C. Scaffolds that were annealed resulted in a more brittle and stiff mat. CONCLUSIONS: We suggest this carrier membrane could be used as a replacement for the human amniotic membrane in the treatment of limbal stem cell deficiency, lowering the risk of disease transmission to the patient.

Development of an Ibuprofen-releasing biodegradable PLA/PGA electrospun scaffold for tissue regeneration.

Our aim was to develop a biodegradable fibrous dressing to act as a tissue guide for in situ wound repair while releasing Ibuprofen to reduce inflammation in wounds and reduce pain for patients on dressing changes. Dissolving the acid form of Ibuprofen (from 1% to 10% by weight) in the same solvent as 75% polylactide, 25% polyglycolide (PLGA) polymers gave uniformly loaded electrospun fibers which gave rapid release of drug within the first 8 h and then slower release over several days. Scaffolds with 10% Ibuprofen degraded within 6 days. The Ibuprofen released from these scaffolds significantly reduced the response of fibroblasts to major pro-inflammatory stimulators. Fibroblast attachment and proliferation on scaffolds was unaffected by the addition of 1-5% Ibuprofen. Scaffolds loaded with 10% Ibuprofen initially showed reduced cell attachment but this was restored by soaking scaffolds in media for 24 h. In summary, addition of Ibuprofen to electrospun biodegradable scaffolds can give acute protection of adjacent cells to inflammation while the scaffolds provide an open 3D fibrous network to which cells can attach and migrate. By 6 days, such scaffolds will have completely dissolved into the wound bed obviating any need for dressing removal.

Development of biodegradable electrospun scaffolds for dermal replacement.

Our objective is to develop a synthetic biodegradable replacement dermal substitute for tissue engineering of skin and oral mucosa. Our in vivo criteria were that candidate scaffolds should allow surrounding cells to migrate fully into the scaffolds, enabling vasculogenesis and remodelling without invoking a chronic inflammatory response. We examined a total of six experimental electrospun polymer scaffolds: (1) poly-l-lactide (PLLA); (2) PLLA+10% oligolactide; (3) PLLA+rhodamine and (4-6) three poly(d,l)-lactide-co-glycolide (PLGA) random multiblock copolymers, with decreasing lactide/glycolide mole fractions (85:15, 75:25 and 50:50). These were evaluated for degradation in vitro up to 108 days and in vivo in adult male Wistar rats from 4 weeks to 12 months. In vivo, all scaffolds permitted good cellular penetration, with no adverse inflammatory response outside the scaffold margin and with no capsule formation around the periphery. The breakdown rate for each scaffold in vitro versus in vivo was similar, and an increase in the ratio of polyglycolide to polylactide correlated with an increase in breakdown rate, as expected. Scaffolds of PLLA were stable in vivo even after 12 months whereas scaffolds fabricated from PLGA 85:15 and 75:25 revealed a 50% loss of mass after 4 and 3 months, respectively. In vitro PLGA 85:15 and 75:25 scaffolds were able to support keratinocyte, fibroblast and endothelial cell growth and extracellular matrix production, with evidence of new collagen production after 7 days. In conclusion, the data supports the development of PLGA 85:15 and 75:25 electrospun polymer scaffolds as potential degradable biomaterials for dermal replacement.

Processed bovine dentine as a bone substitute.

OBJECTIVES: Different forms of allogenic dentine have been studied for their potential use as bone substitutes. We report a new method for processing bovine dentine that results in a sterile bioactive material for repair and regeneration of bone. METHODS: Extracted bovine dentine was processed mechanically and chemically with inorganic and organic solvents, and sterilised. The in vitro biocompatibility on human gingival fibroblasts was assessed by the Alamar Blue assay and the in vivo biocompatibility evaluated by implantation of the processed dentine into rats' femurs. RESULTS: The dentine showed excellent biocompatibility in vitro, stimulated formation of new bone and was completely incorporated into the new bone in vivo. SIGNIFICANCE: Processed bovine dentine has the potential to be used as a suitable substitute in bone repair and regeneration.

Novel UV cured coatings and adhesives based on the photoinitiated cyclopolymerization of derivatives of diallylamine.

A new family of non-acrylate UV cured three-dimensional polymeric networks for coatings and adhesives based on the photoinitiated cyclopolymerization of diallylamine salts and diallylamides using a low power (75 W) UVA domestic sunlamp is described.