Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 4 de 4
Filter
Add more filters










Database
Language
Publication year range
1.
ACS Sustain Chem Eng ; 11(28): 10430-10440, 2023 Jul 17.
Article in English | MEDLINE | ID: mdl-37476421

ABSTRACT

Electrochemical CO2 reduction poses a promising pathway to produce hydrocarbon chemicals and fuels without relying on fossil fuels. Gas diffusion electrodes allow high selectivity for desired carbon products at high current density by ensuring a sufficient CO2 mass transfer rate to the catalyst layer. In addition to CO2 mass transfer, the product selectivity also strongly depends on the local pH at the catalyst surface. In this work, we directly visualize for the first time the two-dimensional (2D) pH profile in the catholyte channel of a gas-fed CO2 electrolyzer equipped with a bipolar membrane. The pH profile is imaged with operando fluorescence lifetime imaging microscopy (FLIM) using a pH-sensitive quinolinium-based dye. We demonstrate that bubble-induced mixing plays an important role in the Faradaic efficiency. Our concentration measurements show that the pH at the catalyst remains lower at -100 mA cm-2 than at -10 mA cm-2, implying that bubble-induced advection outweighs the additional OH- flux at these current densities. We also prove that the pH buffering effect of CO2 from the gas feed and dissolved CO2 in the catholyte prevents the gas diffusion electrode from becoming strongly alkaline. Our findings suggest that gas-fed CO2 electrolyzers with a bipolar membrane and a flowing catholyte are promising designs for scale-up and high-current-density operation because they are able to avoid extreme pH values in the catalyst layer.

2.
ACS Sens ; 8(5): 2050-2059, 2023 05 26.
Article in English | MEDLINE | ID: mdl-37128994

ABSTRACT

Spatiotemporal pH imaging using fluorescence lifetime imaging microscopy (FLIM) is an excellent technique for investigating dynamic (electro)chemical processes. However, probes that are responsive at high pH values are not available. Here, we describe the development and application of dedicated pH probes based on the 1-methyl-7-amino-quinolinium fluorophore. The high fluorescence lifetime and quantum yield, the high (photo)stability, and the inherent water solubility make the quinolinium fluorophore well suited for the development of FLIM probes. Due to the flexible fluorophore-spacer-receptor architecture, probe lifetimes are tunable in the pH range between 5.5 and 11. An additional fluorescence lifetime response, at tunable pH values between 11 and 13, is achieved by deprotonation of the aromatic amine at the quinolinium core. Probe lifetimes are hardly affected by temperature and the presence of most inorganic ions, thus making FLIM imaging highly reliable and convenient. At 0.1 mM probe concentrations, imaging at rates of 3 images per second, at a resolution of 4 µm, while measuring pH values up to 12 is achieved. This enables the pH imaging of dynamic electrochemical processes involving chemical reactions and mass transport.


Subject(s)
Fluorescent Dyes , Optical Imaging , Microscopy, Fluorescence/methods , Hydrogen-Ion Concentration , Water
3.
Sci Rep ; 12(1): 7993, 2022 May 14.
Article in English | MEDLINE | ID: mdl-35568713

ABSTRACT

Here we assess the route to convert low grade waste heat (< 100 °C) into electricity by leveraging the temperature dependency of redox potentials, similar to the Seebeck effect in semiconductor physics. We use fluid-based redox-active species, which can be easily heated and cooled using heat exchangers. By using a first principles approach, we designed a redox flow battery system with Fe(CN)63-/Fe(CN)64- and I-/I3- chemistry. We evaluate the continuous operation with one flow cell at high temperature and one at low temperature. We show that the most sensitive parameter, the temperature coefficient of the redox reaction, can be controlled via the redox chemistry, the reaction quotient and solvent additives, and we present the highest temperature coefficient for this RFB chemistry. A power density of 0.6 W/m2 and stable operation for 2 h are achieved experimentally. We predict high (close to Carnot) heat-to-power efficiencies if challenges in the heat recuperation and Ohmic resistance are overcome, and the temperature coefficient is further increased.

4.
J Phys Chem A ; 121(24): 4633-4644, 2017 Jun 22.
Article in English | MEDLINE | ID: mdl-28558214

ABSTRACT

We report here the synthesis and photophysical study of a series of electron donor-acceptor molecules, in which electron-donating 4-methoxyphenoxy groups are attached to the 1,7-bay positions of four different perylene tetracarboxylic acid derivatives, namely, perylene tetraesters 1, perylene monoimide diesters 2, perylene bisimides 3, and perylene monobenzimidazole monoimides 4. These perylene derivatives are used because of their increasing order of electron-accepting capability upon moving from 1 to 4. Two additional donor-acceptor molecules are synthesized by linking electron-donating 4-methoxyphenyl groups to the imide position of perylene monoimide diester 2 and perylene bisimide 3. The motivation for this study is to achieve a good control over the photoinduced charge-transfer (CT) process in perylene-based systems by altering the position of electron donors and tuning the electron deficiency of perylene core. A comprehensive study of the photophysical properties of these molecules has shown a highly systematic trend in the magnitude of CT as a function of increased electron deficiency of the perylene core and solvent polarity. Importantly, just by changing the attachment of electron-donating group from "bay" to "imide" position, we are able to block the CT process. This implies that the positioning of the electron donor at the perylene core strongly influences the kinetics of the photoinduced CT process. In these compounds, the CT process is characterized by the quenching of fluorescence and singlet excited-state lifetimes as compared to model compounds bearing non-electron-donating 4-tert-butylphenoxy groups. Transient absorption spectroscopy did not reveal spectra of CT states. This most likely implies that the CT state is not accumulated, because of the faster charge recombination.

SELECTION OF CITATIONS
SEARCH DETAIL
...