An Integrated System Using Ultrasound-Based Registration for Surgical Navigation of Iliosacral Screw Insertions.

OBJECTIVE: Pelvic fractures often require fixation through iliosacral joint, typically guided by fluoroscopy using an untracked C-arm device. However, this involves ionizing radiation exposure and potentially inaccurate screw placement. We introduce the Navigated Orthopaedic Fixations using Ultrasound System (NOFUSS), a radiation-free ultrasound (US)-based end-to-end system for providing real-time navigation for iliosacral screw (ISS) insertions. METHODS: We performed surgeries on 8 human cadaver specimens, inserting four ISSs per specimen to directly compare NOFUSS against conventional fluoroscopy. Six specimens yielded usable (marginal or adequate quality) US images. RESULTS: The median screw entry error, midpoint error, and angulations errors for NOFUSS were 8.4 mm, 7.0 mm, and 1.4◦, compared to 7.5 mm (p = 0.52), 5.7 mm (p = 0.30), and 4.4◦ (p = 0.001) for fluoroscopy respectively. NOFUSS resulted in 6 (50%) breaches, compared to 2 (16.7%) in fluoroscopy (p = 0.19). The median insertion time was 7m 37s and 12m 36s per screw for NOFUSS and fluoroscopy respectively (p = 0.002). The median radiation exposure during the fluoroscopic procedure was 2m 44s, (range: 1m 44s - 3m 18s), with no radiation required for NOFUSS. When considering the three cadavers that yielded only adequate-quality US images (12 screws), the measured entry errors were 3.6 mm and 8.1 mm respectively for NOFUSS and fluoroscopy (p = 0.06). CONCLUSION: NOFUSS achieved insertion accuracies on par with the conventionalfluoroscopicmethod,andreducedinsertiontimesandradiation exposure significantly. SIGNIFICANCE: This study demonstrated the feasibility of an automated, radiation-free, US-based surgical navigation system for ISS insertions.

Evaluating femoral augmentation to prevent geriatric hip fracture: A scoping review of experimental methods.

Various femoral augmentation designs have been investigated over the past decade for the prevention of geriatric hip fracture. The experimental methods used to evaluate the efficacy of these augmentations have not been critically evaluated or compared in terms of biofidelity, robustness, or ease of application. Such parameters have significant relevance in characterizing future clinical success. In this study we aimed to use a scoping review to summarize the experimental studies that evaluate femoral augmentation approaches, and critically evaluate commonly applied protocols and identify areas for concordance with the clinical situation. We conducted a literature search targeting studies that used experimental test methods to evaluate femoral augmentation to prevent geriatric fragility fracture. A total of 25 studies met the eligibility criteria. The most commonly investigated augmentation to date is the injection of bone cement or another material that cured in situ, and a popular subsequent method for biomechanical evaluation was to load the augmented proximal femur until fracture in a sideways fall configuration. We noted limitations in the clinical relevance of sideways fall scenarios being modeled and large variance in the concordance of many of the studies identified. Our review brings about recommendations for enhancing the fidelity of experimental methods modeling clinical sideways falls, which include an improved representation of soft tissue effects, using outcome metrics beyond load-to-failure, and applying loads inertially. Effective augmentations are encouraging for their potential to reduce the burden of hip fracture; however, the likelihood of this success is only as strong as the methods used in their evaluation.

Caregiver Experiences Using Orthotic Treatment Options for Developmental Dysplasia of the Hip in Children.

BACKGROUND: Developmental dysplasia of the hip (DDH) is a common condition affecting 5 in 1000 newborns. The standard first line of treatment is the use of an orthotic, which has generally high success rates, but can pose substantial difficulties and put undue burden on caregivers. The general experience of caregivers using these orthotics has not been well documented on an orthotic-specific basis. The purpose of this study was to investigate caregiver experience using prescribed DDH orthotics to identify challenges, differences between treatment options, and areas of improvement. METHODS: A survey assessing treatment prescription, respondent demographics, and caregiver experience was distributed online to caregivers whose child/children were treated for DDH with an orthotic. Seven-point positively phrased Likert scale statements and open-ended questions were included to assess caregiver experience. The results were analyzed using summary statistics and orthotics with more than 30 responses were selected for more in-depth analysis. RESULTS: A total of 530 survey responses were collected with 63% (334/530) of respondents using a Pavlik harness, 45% (236/530) a Rhino brace, and 13% (67/530) a Denis Browne Bar. The overall weighted average score across all Likert Scale statements was positive for the Pavlik harness, Rhino brace, and Denis Browne Bar at 4.19 (95% CI, 3.83 to 4.54), 4.63 (95% CI, 4.27 to 4.99) and 4.91 (95% CI, 4.58 to 5.24), respectively. In the open-ended responses, all 3 orthotics were perceived as easy to use and not hindering child-caregiver bonding, but raised concerns of discomfort and skin irritation, as well as preventing the ability to cuddle their child the way they desired. The Pavlik harness respondents consistently brought up concerns regarding cleanability. CONCLUSIONS: The results show that the DDH orthotics analyzed are generally easy to use and perceived positively by caregivers, but have orthotic-specific challenges that should be a focus of future improvement work. CLINICAL RELEVANCE: This study evaluated opinions and attitudes of caregivers for children being treated with DDH orthotics, revealing experiences, concerns, and challenges associated with the use of commonly prescribed options.

No more rattling: biomechanical evaluation of a hexapod ring fixator free of play.

Hexapod-ring-fixators have a characteristic rattling sound during load changes due to play in the hexapod struts. This play is perceived as unpleasant by patients and can lead to frame instability. Using slotted-ball-instead of universal-joints for the ring-strut connection could potentially resolve this problem. The purpose of the study was to clarify if the use of slotted-ball-joints reduces play and also fracture gap movement. A hexapod-fixator with slotted-ball-joints and aluminum struts (Ball-Al) was compared to universal-joint-fixators with either aluminum (Uni Al) or steel struts (Uni Steel). Six fixator frames each were loaded in tension, compression, torsion, bending and shear and mechanical performance was analyzed in terms of movement, stiffness and play. The slotted-ball-joint fixator was the only system without measurable axial play (<0.01 mm) compared to Uni-Al (1.2 ± 0.1) mm and Uni-Steel (0.6 ± 0.2) mm (p≤0.001). In both shear directions the Uni-Al had the largest play (p≤0.014). The resulting axial fracture gap movements were similar for the two aluminum frames and up to 25% smaller for the steel frame, mainly due to the highest stiffness found for the Uni-Steel in all loading scenarios (p≤0.036). However, the Uni-Steel construct was also up to 29% (450 g) heavier and had fewer usable mounting holes. In conclusion, the slotted-ball-joints of the Ball-Al fixator reduced play and minimized shear movement in the fracture while maintaining low weight of the construct. The heavier and stiffer Uni-Steel fixator compensates for existing play with a higher overall stiffness.

Biomechanics of Osteoporotic Fracture Fixation.

PURPOSE OF REVIEW: Fractures of osteoporotic bone in elderly individuals need special attention. This manuscript reviews the current strategies to provide sufficient fracture fixation stability with a particular focus on fractures that frequently occur in elderly individuals with osteoporosis and require full load-bearing capacity, i.e., pelvis, hip, ankle, and peri-implant fractures. RECENT FINDINGS: Elderly individuals benefit immensely from immediate mobilization after fracture and thus require stable fracture fixation that allows immediate post-operative weight-bearing. However, osteoporotic bone has decreased holding capacity for metallic implants and is thus associated with a considerable fracture fixation failure rate both short term and long term. Modern implant technologies with dedicated modifications provide sufficient mechanical stability to allow immediate weight-bearing for elderly individuals. Depending on fracture location and fracture severity, various options are available to reinforce or augment standard fracture fixation systems. Correct application of the basic principles of fracture fixation and the use of modern implant technologies enables mechanically stable fracture fixation that allows early weight-bearing and results in timely fracture healing even in patients with osteoporosis.

External fixation of the lower extremities: Biomechanical perspective and recent innovations.

The concept of supporting fractured long bones externally with mechanical fixation has been evidentially applied for over 2000 years, and since been expanded on in the mid-19th century by percutaneous bone fixation. Surgical techniques, external fixator systems, and materials have made continued progress since. The benefits of traditional external fixation have been enhanced in recent years with the introduction of hexapod-style fixators, innovative configurations, and pin modifications, among other things. It is generally agreed upon that biomechanical testing of advancements in external fixation must be inclusive of transverse or torsional loading to simulate construct behaviour in realistic scenarios. Biomechanical studies indicate that hexapod-style fixators show comparable axial stiffness to Ilizarov-style systems and improved performance under torsional and transverse forces. The addition of configuration elements to fixators, inclusion of certain carbon fibre chemical compositions, and techniques intended to augment ring thickness have also been investigated, in hopes of increasing construct stiffness under loading. Novel external fixators attempt to broaden their applications by rethinking bone mounting mechanisms and either expanding on or simplifying the implementation of 3D bone segment transport for corrective osteotomy. Older and seemingly unconventional fixation techniques are being rediscovered and evolved further in order to increase patient comfort by improving everyday usability. The development of new pin coatings can potentially enhance the pin-bone interface while lowering infection rates typically expected at thicker soft tissue envelopes. Although complication, malunion, and nonunion rates have decreased over the past 50 years, the clinical results of external fixation today can still be optimized. Unsatisfactory healing in the lower extremities has especially been reported at locations such as the distal tibia; however, advancements such as osteoinductive growth hormone treatment may provide improved results. With the current progression of technology and digitization, it is only a matter of time before 'smart', partly-autonomous external fixation systems enter the market. This review article will provide a versatile overview of biomechanically proven fixator configurations and some carefully selected innovative systems and techniques that have emerged or been established in the past two decades.

Evaluation of a novel bicycle helmet concept in oblique impact testing.

BACKGROUND: A novel bicycle helmet concept has been developed to mitigate rotational head acceleration, which is a predominant mechanism of traumatic brain injury (TBI). This WAVECEL concept employs a collapsible cellular structure that is recessed within the helmet to provide a rotational suspension. This cellular concept differs from other bicycle helmet technologies for mitigation of rotational head acceleration, such as the commercially available Multi-Directional Impact Protection System (MIPS) technology which employs a slip liner to permit sliding between the helmet and the head during impact. This study quantified the efficacy of both, the WAVECEL cellular concept, and a MIPS helmet, in direct comparison to a traditional bicycle helmet made of rigid expanded polystyrene (EPS). METHODS: Three bicycle helmet types were subjected to oblique impacts in guided vertical drop tests onto an angled anvil: traditional EPS helmets (CONTROL group); helmets with a MIPS slip liner (SLIP group); and helmets with a WAVECEL cellular structure (CELL group). Helmet performance was evaluated using 4.8 m/s impacts onto anvils angled at 30°, 45°, and 60° from the horizontal plane. In addition, helmet performance was tested at a faster speed of 6.2 m/s onto the 45° anvil. Five helmets were tested under each of the four impact conditions for each of the three groups, requiring a total of 60 helmets. Headform kinematics were acquired and used to calculate an injury risk criterion for Abbreviated Injury Score (AIS) 2 brain injury. RESULTS: Linear acceleration of the headform remained below 90 g and was not associated with the risk of skull fracture in any impact scenario and helmet type. Headform rotational acceleration in the CONTROL group was highest for 6.2 m/s impacts onto the 45° anvil (7.2 ± 0.6 krad/s2). In this impact scenario, SLIP helmets and CELL helmets reduced rotational acceleration by 22% (p = 0003) and 73% (p < 0.001), respectively, compared to CONTROL helmets. The CONTROL group had the highest AIS 2 brain injury risk of 59 ± 8% for 6.2 m/s impacts onto the 45° anvil. In this impact scenario, SLIP helmets and CELL helmets reduced the AIS 2 brain injury risk to 34.2% (p = 0.001) and 1.2% (p < 0.001), respectively, compared to CONTROL helmets. DISCUSSION: Results of this study are limited to a narrow range of impact conditions, but demonstrated the potential that rotational acceleration and the associated brain injury risk can be significantly reduced by the cellular WAVECEL concept or a MIPS slip liner. Results obtained under specific impact angles and impact velocities indicated performance differences between these mechanisms. These differences emphasize the need for continued research and development efforts toward helmet technologies that further improve protection from brain injury over a wide range a realistic impact parameters.

Biomechanics of Femoral Neck Fractures and Implications for Fixation.

Fractures of the femoral neck can occur in young healthy individuals due to high loads occurring during motor vehicle accidents, impacts, or falls. Failure forces are lower if impacts occur sideways onto the greater trochanter as compared with vertical loading of the hip. Bone density, bone geometry, and thickness of cortical bone at the femoral neck contribute to its mechanical strength. Femoral neck fractures in young adults require accurate reduction and stable internal fixation. The available techniques for fracture fixation at the femoral neck (cannulated screws, hip screw systems, proximal femur plates, and cephallomedullary nails) are reviewed with respect to their competence to provide biomechanical stability. Mechanically unstable fractures require a load-bearing implant, such as hip screws, with antirotational screws or intramedullary nails. Subcapital or transcervical fracture patterns and noncomminuted fractures enable load sharing and can be securely fixed with cannulated screws or solitary hip screw systems without compromising fixation stability.

Dynamic Stabilization of Simple Fractures With Active Plates Delivers Stronger Healing Than Conventional Compression Plating.

OBJECTIVES: Active plates dynamize a fracture by elastic suspension of screw holes within the plate. We hypothesized that dynamic stabilization with active plates delivers stronger healing relative to standard compression plating. METHODS: Twelve sheep were randomized to receive either a standard compression plate (CP) or an active plate (ACTIVE) for stabilization of an anatomically reduced tibial osteotomy. In the CP group, absolute stabilization was pursued by interfragmentary compression with 6 cortical screws. In the ACTIVE group, dynamic stabilization after bony apposition was achieved with 6 elastically suspended locking screws. Fracture healing was analyzed weekly on radiographs. After sacrifice 9 weeks postsurgery, the torsional strength of healed tibiae and contralateral tibiae was measured. Finally, computed tomography was used to assess fracture patterns and healing modes. RESULTS: Healing in both groups included periosteal callus formation. ACTIVE specimens had almost 6 times more callus area by week 9 (P < 0.001) than CP specimens. ACTIVE specimens recovered on average 64% of their native strength by week 9, and were over twice as strong as CP specimens, which recovered 24% of their native strength (P = 0.008). Microcomputed tomography demonstrated that compression plating induced a combination of primary bone healing and gap healing. Active plating consistently stimulated biological bone healing by periosteal callus formation. CONCLUSIONS: Compared with compression plating, dynamic stabilization of simple fractures with active plates delivers significantly stronger healing.

Dynamic Stabilization with Active Locking Plates Delivers Faster, Stronger, and More Symmetric Fracture-Healing.

BACKGROUND: Axial dynamization of fractures can promote healing, and overly stiff fixation can suppress healing. A novel technology, termed active plating, provides controlled axial dynamization by the elastic suspension of locking holes within the plate. This prospective, controlled animal study evaluated the effect of active plates on fracture-healing in an established ovine osteotomy model. We hypothesized that symmetric axial dynamization with active plates stimulates circumferential callus and delivers faster and stronger healing relative to standard locking plates. METHODS: Twelve sheep were randomly assigned to receive a standard locking plate or an active locking plate for stabilization of a 3-mm tibial osteotomy gap. The only difference between plates was that locking holes of active plates were elastically suspended, allowing up to 1.5 mm of axial motion at the fracture. Fracture-healing was analyzed weekly on radiographs. After sacrifice at nine weeks postoperatively, callus volume and distribution were assessed by computed tomography. Finally, to determine their strength, healed tibiae and contralateral tibiae were tested in torsion until failure. RESULTS: At each follow-up, the active locking plate group had more callus (p < 0.001) than the standard locking plate group. At postoperative week 6, all active locking plate group specimens had bridging callus at the three visible cortices. In standard locking plate group specimens, only 50% of these cortices had bridged. Computed tomography demonstrated that all active locking plate group specimens and one of the six standard locking plate group specimens had developed circumferential callus. Torsion tests after plate removal demonstrated that active locking plate group specimens recovered 81% of their native strength and were 399% stronger than standard locking plate group specimens (p < 0.001), which had recovered only 17% of their native strength. All active locking plate group specimens failed by spiral fracture outside the callus zone, but standard locking plate group specimens fractured through the osteotomy gap. CONCLUSIONS: Symmetric axial dynamization with active locking plates stimulates circumferential callus and yields faster and stronger healing than standard locking plates. CLINICAL RELEVANCE: The stimulatory effect of controlled motion on fracture-healing by active locking plates has the potential to reduce healing complications and to shorten the time to return to function.