Assessment of a low-frequency ultrasound device on prevention of biofilm formation and carbonate deposition in drinking water systems.

A device generating low-frequency and low-intensity ultrasound waves was used for mitigating biofilm accumulation and scaling. Two systems were tested: a lab-scale plate heat exchanger operated with continuously recycled water and a continually fed flow-through drinking water pilot used for mimicking water circulation in pipes. Initial deposition of bacterial cells was not prevented by ultrasound wave treatment. However, whatever the tested system, both further calcium carbonate deposition and biofilm growth were markedly inhibited. Biofilms formed in reactors subjected to low-frequency and low-intensity ultrasound waves were weakly attached to the material. Even though the activity of bacteria was affected as shown by their lower cultivability, membrane permeability did not appear compromised. Ultrasound technology sounds very promising in both the mitigation of drinking water biofilm and carbonate accumulation.

Nano-exploration of organic conditioning film formed on polymeric surfaces exposed to drinking water.

Adsorption of organic macromolecules onto surfaces in contact with waters forms a so-called conditioning film and induces modifications of the surface properties. Here, we characterized conditioning films formed onto two hydrophobic materials (used as pipe liner) and immersed for 24 h in tap water. Using combination of atomic force microscopy (AFM), and chemical force microscopy (CFM), we detected some changes in roughness and hydrophilic/hydrophobic balance of the surface of the tested coupons, and also the deposition of numerous organic polymers (few millions/cm2) randomly distributed on the surface. The maximum molecular extension of these organic polymers was in the range of 250-1250 nm according to the tested materials. Systematic analysis of the force curves with the theoretical models (WLC and FJC) allowed determining the proportion of rupture events related to the unfolding of both polysaccharide and polypeptide segments, which represented 75-80% and 20-25% of the analyzed curves, respectively. The number of autochthonous drinking water bacteria, which attached to the material within the same period of time was 10000-folds lower than the detected number of polymers attached to the surface. Even in drinking water systems with relatively low organic matter (dissolved organic carbon < 1.1 mg/L), the potential of formation of a conditioning biofilm is important.

Bacterial repopulation of drinking water pipe walls after chlorination.

The short-term kinetics of bacterial repopulation were evaluated after chlorination of high-density polyethylene (HDPE) colonized with drinking water biofilms and compared with bare HDPE surfaces. The effect of chlorination was partial as a residual biofilm persisted and was time-limited as repopulation occurred immediately after water resupply. The total number of bacteria reached the same levels on both the bare and chlorinated biofilm-fouled HDPE after a seven-day exposure to drinking water. Due to the presence of a residual biofilm, the hydrophobicity of chlorinated biofilm-fouled surface exhibited much lower adhesion forces (2.1 nN) compared to bare surfaces (8.9 nN). This could explain the rapid repopulation after chlorination, with a twofold faster bacterial accumulation rate on the bare HDPE surface. γ-Proteobacteria dominated the early stages of repopulation of both surfaces and a shift in the dominance occurred over the colonization time. Such observations define a timescale for cleaning frequency in industrial environments and guidelines for a rinsing procedure using drinking water.

Comparison of Buffered, Acidified Plate Antigen to Standard Serologic Tests for the Detection of Serum Antibodies to Brucella abortus in Elk (Cervus canadensis).

Brucellosis (caused by the bacterium Brucella abortus) is a zoonotic disease endemic in wild elk (Cervus canadensis) of the Greater Yellowstone Ecosystem, US. Because livestock and humans working with elk or livestock are at risk, validated tests to detect the B. abortus antibody in elk are needed. Using the κ-statistic, we evaluated the buffered, acidified plate antigen (BAPA) assay for agreement with the results of the four serologic tests (card test [card], complement fixation test [CF], rivanol precipitation plate agglutination test [RIV], standard plate agglutination test [SPT]) that are approved by the US Department of Agriculture for the detection of the B. abortus antibody in elk. From 2006 to 2010, serum samples collected from elk within B. abortus-endemic areas (n = 604) and nonendemic areas (n = 707) and from elk culture-positive for B. abortus (n = 36) were split and blind tested by four elk serum diagnostic laboratories. κ-Values showed a high degree of agreement for the card (0.876), RIV (0.84), and CF (0.774) test pairings and moderate agreement for the SPT (0.578). Sensitivities for the BAPA, card, RIV, CF, and SPT were 0.859, 0.839, 0.899, 1.00, and 0.813, whereas specificities were 0.986, 0.993, 0.986, 0.98, and 0.968, respectively. The positive predictive values and the negative predictive values were calculated for 2.6%, 8.8%, and 16.2% prevalence levels. These findings suggest the BAPA test is a suitable screening test for the B. abortus antibodies in elk.

Patterned hydrophobic domains in the exopolymer matrix of Shewanella oneidensis MR-1 biofilms.

Water-dispersible amphiphilic surface-engineered quantum dots (QDs) were found to be strongly accumulated within discrete zones of the exopolymer network of Shewanella oneidensis MR-1 biofilms, but not on the cell surfaces. These microdomains showed a patterned distribution in the exopolymer matrix, which led to a restricted diffusion of the amphiphilic nanoparticles.

Cohesiveness and hydrodynamic properties of young drinking water biofilms.

Drinking water biofilms are complex microbial systems mainly composed of clusters of different size and age. Atomic force microscopy (AFM) measurements were performed on 4, 8 and 12 weeks old biofilms in order to quantify the mechanical detachment shear stress of the clusters, to estimate the biofilm entanglement rate ξ. This AFM approach showed that the removal of the clusters occurred generally for mechanical shear stress of about 100 kPa only for clusters volumes greater than 200 µm3. This value appears 1000 times higher than hydrodynamic shear stress technically available meaning that the cleaning of pipe surfaces by water flushing remains always incomplete. To predict hydrodynamic detachment of biofilm clusters, a theoretical model has been developed regarding the averaging of elastic and viscous stresses in the cluster and by including the entanglement rate ξ. The results highlighted a slight increase of the detachment shear stress with age and also the dependence between the posting of clusters and their volume. Indeed, the experimental values of ξ allow predicting biofilm hydrodynamic detachment with same order of magnitude than was what reported in the literature. The apparent discrepancy between the mechanical and the hydrodynamic detachment is mainly due to the fact that AFM mechanical experiments are related to the clusters local properties whereas hydrodynamic measurements reflected the global properties of the whole biofilm.

Persistence and dissemination of the multiple-antibiotic-resistance plasmid pB10 in the microbial communities of wastewater sludge microcosms.

Plasmid-mediated dissemination of antibiotic resistance genes is widely recognized to take place in many environmental compartments but remains difficult to study in a global perspective because of the complexity of the environmental matrices considered and the lack of exhaustive tools. In this report, we used a molecular approach based on quantitative PCR to monitor the fate of the antibiotic resistance plasmid pB10 and its donor host in microbial communities collected from various wastewater treatment plant (WWTP) sludges and maintained in microcosms under different conditions. In aerated activated sludge microcosms, pB10 did not persist because of an apparent loss of the donor bacteria. The persistence of the donor bacteria noticeably increased in non-aerated activated sludge microcosms or after amending antibiotics (sulfamethoxazole or amoxicillin) at sub-inhibitory concentrations, but the persistence of the donor bacteria did not stimulate the dissemination of pB10. The dissemination of the plasmid appeared as an increasing plasmid to donor ratio in microcosm setups with microbial communities collected in anaerobic digesters or the spatially organized communities from fixed biofilm reactors. As a whole, the data collected suggest that some WWTP processes, more than others, may sustain microbial communities that efficiently support the dissemination of the multiple-antibiotic-resistance plasmid pB10.

Improving the recovery of qPCR-grade DNA from sludge and sediment.

DNA extraction is often considered as the limiting step of most molecular approaches in ecology and environmental microbiology. Ten existing DNA extraction protocols were compared for recovery of DNA from sludge and a modified version of the protocol described by Porteous et al. (Mol Ecol 6:787-791, 1997) was determined to be the best method for recovery of DNA suitable for PCR. In this respect, it appeared that the commonly used guanidine isothiocyanate could impair the quality of the extracted DNA unless its concentration is lowered. Second, conditioning the samples as liquors as opposed to pellets critically impacts the outcome of the extraction. The suitability of the modified Porteous protocol for quantitative PCR applications is demonstrated in a series of experiments showing the absence of interfering coextracted inhibitors and the linear correspondence between the concentrations of input target DNA and PCR product. Interestingly, it is also shown that the nature of the environmental matrices affects the recovery yield of both circular plasmids and chromosomal DNA, resulting in an apparent fluctuation of the plasmid copy number per cell. This means that quantitative data obtained by PCR remain comparable as long as they apply to an identical target sequence extracted from a similar environment and amplified under the same conditions.

Probing young drinking water biofilms with hard and soft particles.

The aim of our study was to investigate, through the use of soft (Escherichia coli) and hard (polystyrene microspheres) particles, the distribution and persistence of allochthonous particles inoculated in drinking water flow chambers. Biofilms were allowed to grow for 7-10 months in tap water from Nancy's drinking water network and were composed of bacterial aggregates and filamentous fungi. Both model particles adhered almost exclusively on the biofilms (i.e. on the bacterial aggregates and on the filamentous structures) and not directly on the uncolonized walls (glass or Plexiglas). Biofilm age (i.e. bacterial density and biofilm properties) and convective-diffusion were found to govern particle accumulation: older biofilms and higher wall shear rates both increased the velocity and the amount of particle deposition on the biofilm. Persistence of the polystyrene particles was measured over a two-month period after inoculation. Accumulation amounts were found to be very different between hard and soft particles as only 0.03 per thousand of the soft particles inoculated accumulated in the biofilm against 0.3-0.8% for hard particles.

Adhesion of Campylobacter jejuni and Mycobacterium avium onto polyethylene terephtalate (PET) used for bottled waters.

Adhesion of the bacteria Campylobacter jejuni and Mycobacterium avium onto polyethylene terephtalate (PET), a polymer widely used within the bottled water industry was measured in two different groundwater solutions. From this, it was found that whilst the percentage cell adhesion for a given strain did not change between groundwater types, substantial variation was obtained between the two bacterial species tested: M. avium (10-30% adhered cells) and C. jejuni (1-2%) and no major variations were measured as a function of groundwater composition for a given strain. To explain this, the interfacial electro-hydrodynamic properties of the bacteria were investigated by microelectrophoresis, with the resultant data analysed on the basis of electrokinetic theory for soft biocolloidal particles. The results obtained showed that M. avium carries a significant volume charge density and that its peripheral layer exhibits limited hydrodynamic flow permeation compared to that of C. jejuni. It was also demonstrated that steric hindrance to flow penetration and the degree of hydrophobicity within/of the outer bacterial interface are larger for M. avium cells. In line with this, the larger amount of M. avium cells deposited onto PET substrates as compared to that of C. jejuni can be explained by hydrophobic attraction and chemical binding between hydrophobic PET and outer soft surface layer of the bacteria. Hydrophobicity of PET was addressed by combining contact angle analyses and force spectroscopy using CH(3)-terminated AFM tip.

Role of glutathione metabolism status in the definition of some cellular parameters and oxidative stress tolerance of Saccharomyces cerevisiae cells growing as biofilms.

The resistance of Saccharomyces cerevisiae to oxidative stress (H(2)O(2) and Cd(2+)) was compared in biofilms and planktonic cells, with the help of yeast mutants deleted of genes related to glutathione metabolism and oxidative stress. Biofilm-forming cells were found predominantly in the G1 stage of the cell cycle. This might explain their higher tolerance to oxidative stress and the young replicative age of these cells in an old culture. The reduced glutathione status of S. cerevisiae was affected by the growth phase and apparently plays an important role in oxidative stress tolerance in cells growing as a biofilm.

Effect of wall shear rate on biofilm deposition and grazing in drinking water flow chambers.

The effect of four-wall shear rates (34.9, 74.8, 142.5, and 194.5 s(-1)) on bacterial deposition on glass slides in drinking water flow chambers was studied. Biofilm image acquisition was performed over a 50-day period. Bacterial accumulation and surface coverage curves were obtained. Microscopic observations allowed us to obtain information about the dynamics and spatial distribution of the biofilm. During the first stage of biofilm formation (210-518 h), bacterial accumulation was a function of the wall shear rate: the higher the wall shear rate, the faster the bacterial deposition (1.1 and 1.9 x 10(4) bacterial cells . cm(-2) for wall shear rates of 34.9 and 142.5 s(-1), respectively). A new similarity relationship characteristic of a non-dimensional time and function of the wall shear rate was proposed to describe initial bacterial deposition. After 50 days of exposure to drinking water, surface coverage was more or less identical under the entire wall shear rates (7.44 +/- 0.9%), suggesting that biofilm bacterial density cannot be controlled using hydrodynamics. However, the spatial distribution of the biofilm was clearly different. Under low wall shear rate, aggregates were composed of bacterial cells able to "vibrate" independently on the surface, whereas, under a high wall shear rate, aggregates were more cohesive. Therefore, susceptibility to the hydraulic discontinuities occurring in drinking water system may not be similar. In all the flow chambers, significant decreases in bacterial biomass (up to 77%) were associated with the presence of amoebae. This grazing preferentially targeted small, isolated cells.

Prevalence of antibodies to serotypes of Bluetongue virus and Anaplasma marginale in Montana feeder cattle: 2002-2003.

In a serologic survey of Montana-source weaned calves and yearling cattle, the apparent prevalence of antibodies to Bluetongue virus was 0.68% and 1.26% in 2002 and 2003, respectively, and to Anaplasma marginale at a positive cutoff at 30% inhibition it was 1.82% and 1.35% in 2002 and 2003, and at a positive cutoff at 42% inhibition it was 0.76% and 0.55% in 2002 and 2003, respectively, suggesting that the risk of importing infected animals was very low.

Advantage provided by iron for Escherichia coli growth and cultivability in drinking water.

The presence of iron, used both as a nutrient and as an electron acceptor, was demonstrated to give an advantage to Escherichia coli bacteria in drinking water. Slight additions of ferrous sulfate to water with initial low iron concentrations led to a significant increase in the number of E. coli bacteria. The presence of ferric oxide in water under anaerobic conditions increased bacterial cultivability.

Nucleic acid fluorochromes and flow cytometry prove useful in assessing the effect of chlorination on drinking water bacteria.

Flow cytometry (FCM), combined with staining using two fluorochromes (propidium iodide, PI, or SYBR Green II RNA gel stain, SYBR-II), was used to assess nucleic acid injuries to chlorinated drinking water bacteria. Highly fluorescent SYBR-II-stained bacteria were converted to bacteria with low fluorescence after chlorination. PI staining of bacteria exposed to different doses of chlorine showed membrane permeabilisation ([Cl2] < 0.2 mg L(-1)) and nucleic acid damage at higher doses ([Cl2] > 0.3 mg L(-1)). Above a threshold dose (between 1.5 and 3 mg Cl2 L(-1)), nucleic acids appeared severely damaged and incapable of being stained by PI or SYBR-II. These results constitute evidence that FCM is a promising tool for assessing drinking water bacteria injuries and for controlling chlorine disinfection efficiency much more rapidly than the standard sensitive but time-consuming heterotrophic plate count method.

Fatty acids of lipid fractions in extracellular polymeric substances of activated sludge flocs.

Phospholipid (PL), glycolipid (GL), and neutral lipid (NL) FA, and the lipopolysaccharide 2- and 3-hydroxy (LPS 2-OH and 3-OH) FA of activated sludges and extracted extracellular polymeric substances (EPS) were determined on samples collected from two wastewater treatment plants. EPS extracted from sludges by means of sonication and cation exchange contained proteins (43.4%), humic-like substances (11.5%), nucleic acids (10.9%), carbohydrates (9.9%), and lipid-bound FA (1.8%). The lipids associated with EPS were composed of GL, PL, NL, and LPS acids in proportions of 61, 21, 16, and 2%, respectively. The profiles of lipid-bound FA in activated sludges and EPS were similar (around 85 separate FA were identified). The FA signatures observed can be attributed to the likely presence of yeasts, fungi, sulfate-reducing bacteria, gram-positive and gram-negative bacteria, and, in lesser quantities, mycobacteria. Comparison of data from the dates of sampling (January and September) showed that there were more unsaturated PLFA in the EPS extracted from the activated sludges sampled in January. This observation could be partly related to microorganism adaptation to temperature variations. The comparison between two wastewater treatment plants showed that the FA profiles were similar, although differences in microbial community structure were also seen. Most of the FA in sludges had an even number of carbons.

Influence of phosphate on bacterial adhesion onto iron oxyhydroxide in drinking water.

The transport and storage of drinking water in water distribution systems can modify its initial composition and properties. The accumulation of bacteria on corroded pipes is prejudicial and may lower the microbiological quality of the water. Previous results have shown that when pipes are highly corroded, the addition of phosphate, used as an anticorrosion treatment, decreases the bacterial concentration in the water. We studied the possibility of using phosphate to reverse the surface charge of iron oxyhydroxide (FeOOH) to limit bacterial adhesion. Iron oxyhydroxide (IOH) particles and Escherichia coli SH 702 were used as models of corrosion products and bacterial contamination, respectively. Electrophoresis was used to characterize the initial surface charges of both types of particles and the modifications that occurred after the addition of phosphate anions. Flow cytometry and adhesion assays were used to build adsorption isotherms of bacteria on IOH versus (phosphated-) IOH. X-ray photoelectron spectroscopy permitted to determine the chemical composition of the E. coli envelope and to discuss on functional groups responsible for bacterial surface properties. In the present conditions, adding phosphate to water allowed a decrease of 75% of the bacteria adhering to IOH.

Iron(II,III) hydroxycarbonate green rust formation and stabilization from lepidocrocite bioreduction.

Bioreduction of the well-crystallized ferric oxyhydroxide gamma-FeOOH lepidocrocite was investigated in batch cultures using Shewanella putrefaciens bacterium (strain CIP 8040) at initial pH 7.5 in bicarbonate buffer. The cultures were performed with formate as electron donor without phosphate, in the presence or absence of anthraquinone-2,6-disulfonate (AQDS) as electron shuttle. During lepidocrocite reduction, the iron(II,III) hydroxycarbonate green rust GR(CO32-) was characterized by X-ray diffraction, transmission electron microscopy, and transmission Mössbauer spectroscopy. The AQDS accelerated the kinetics of GR formation. GR was the major end product when bacterial reduction was not stopped by lack of electron donor, and between 55 and 86% of the iron from gamma-FeOOH precipitated in GR(CO32-). However, when the bacterial reduction was stopped by freezing/thawing or the electron donor was exhausted, the large quantity of remaining lepidocrocite induced a transformation of GR into magnetite. This confirms that GR is metastable with respect to magnetite in the presence of gamma-FeOOH.