Electrochemical Pixels: Semi-open electrochemical cells with a vertically stacked design.

A novel electrochemical cell design in a vertically stacked configuration is presented. Through a layered structure using a top macroporous working electrode, a polyelectrolyte, and a bottom metallic conductor a standalone electrochemical cell with an internal reference electrode is built. This sensor allows monitoring an electrochemical property of an external solution with only one electrode in direct contact with the sample. Using paper-based platinum electrode for the porous top electrode and Nafion as polyelectrolyte material, the self-powered detection of hydrogen peroxide is performed. The system can be operated in multiple modes. In a capacitive way, the open circuit potential is measured. Alternatively, in a self-powered current mode, the system emulates a fuel cell. Additionally, a potential-current switched mode is also demonstrated. Because of this unique design and operational features this sensor is considered as an electrochemical pixel. To further demonstrate the advantages of this device, the detection of glucose is performed by building an array of sensors using a single back (reference) electrode and multiple working electrodes. These results lay the groundwork for the development of a new generation of simple and low cost biochemical sensors and electrochemical sensing arrays.

Potentiometric detection of creatinine in the presence of nicotine: Molecular recognition, sensing and quantification through multivariate regression.

Systematic errors in the calix [4] pyrrole-based potentiometric detection of creatinine have been observed in heavy smokers. This work further characterizes the interactions between the nicotinium cation and the cavitand as well as the resulting interference produced during the potentiometric detection. It is found that the nicotinium cation binds the electronic rich aromatic cavity defined by the pyrrole rings of the receptor's cone conformation with an estimated binding constant higher than 10-4 M-1 in methylene chloride. On the other hand, the creatininium cation is preferentially included in the hydrophobic aromatic cavity of the ionophore by establishing hydrogen bond interactions with the pyrrole NHs groups. Potentiometric calibrations confirmed the detection of the nicotinium cation at neutral and acidic pH, respectively. Due to the lower pka of creatinine, a methodology to quantify creatinine in presence of nicotine by using an array of three sensors at two pH values is proposed. A partial least squares regression was performed and reported recoveries of 103% with a standard deviation of 20%. The improved determination of creatinine was therefore discussed. This approach represents a step forward in the development of effective approaches to improve the measurement of creatinine in decentralized settings.

The Use of Conducting Polymers for Enhanced Electrochemical Determination of Hydrogen Peroxide.

The role of hydrogen peroxide in a wide range of biological processes has led to a steady increase in research into hydrogen peroxide determination in recent years, and conducting polymers have attracted much interest in electrochemistry as promising materials in this area. We present an overview of electrochemical devices for hydrogen peroxide determination using conducting polymers, either as a target or as a byproduct of redox reactions. We describe different combinations of electrode modifications through the incorporation of conducting polymers as the main component along with other materials or nanomaterials. We critically compare the analytical performances cited and highlight some of the future challenges for the feasible application of such devices.

Modulating the mixed potential for developing biosensors: Direct potentiometric determination of glucose in whole, undiluted blood.

The growing demand for tools to generate chemical information in decentralized settings is creating a vast range of opportunities for potentiometric sensors, since their combination of robustness, simplicity of operation and cost can hardly be rivalled by any other technique. In previous works, we have shown that the mixed potential of a Pt electrode can be controlled with analytical purposes using a coating of Nafion, thus providing a way to develop a potentiometric biosensor for glucose. Unfortunately, the linear range of this device did not match the relevant clinical range for glucose in blood. This work presents a novel strategy to control the mixed potential that allows the development of a potentiometric biosensor for the direct detection of glucose in whole, undiluted blood without any sample pretreatment. By changing the ionomer, the analytical response can be tuned, shifting the linear range while keeping the sensitivity. Aquivion, a polyelectrolyte from the same family as Nafion, is used to stabilize the mixed potential of a platinized paper-based electrode, to entrap the enzyme and to reduce the interference from negatively charged species. Factors affecting the generation of the signal and the principle of detection are discussed. Optimization of the biosensor composition was achieved with particular focus on the characterization of the linear range and sensitivity. The accurate measurement of blood sugar levels in a single drop of whole blood with excellent recovery is presented.

A novel point-of-care device for blood potassium detection of patients on dialysis: Comparison with a reference method / Un nuevo dispositivo de punto de atención para la detección de potasio en sangre de pacientes en diálisis: comparación con un método de referencia

No disponible

Controlling the mixed potential of polyelectrolyte-coated platinum electrodes for the potentiometric detection of hydrogen peroxide.

The use of a Pt electrode coated with a layer of Nafion has been described in previous works as an attractive way to perform the potentiometric detection of hydrogen peroxide. Despite of the attractive features of this approach, the nature of the non-Nernstian response of this system was not properly addressed. In this work, using a mixed potential model, the open circuit potential of the Pt electrode is shown to be under kinetic control of the oxygen reduction reaction (ORR). It is proposed that hydrogen peroxide acts as an oxygenated species that blocks free sites on the Pt surface, interfering with the ORR. Therefore, the effect of the polyelectrolyte coating can be understood in terms of the modulation of the factors that affects the kinetics of the ORR, such as an increase of the H+ concentration, minimization of the effect of the spectator species, etc. Because of the complexity and the lack of models that accurately describe systems with practical applications, this work is not intended to provide a mechanistic but rather a phenomenological view on problem. A general framework to understand the factors that affect the potentiometric response is provided. Experimental evidence showing that the use of polyelectrolyte coatings are a powerful way to control the mixed potential open new ways for the development of robust and simple potentiometric sensors.

A Wearable Paper-Based Sweat Sensor for Human Perspiration Monitoring.

The fabrication and performance of a wearable paper-based chemiresistor for monitoring perspiration dynamics (sweat rate and sweat loss) are detailed. A novel approach is introduced to measure the amount of aqueous solution in the order of microliters delivered to the sensor by monitoring a linear change in resistance along a conducting paper. The wearable sensor is based on a single-walled carbon nanotubes and surfactant (sodium dodecylbenzenesulfonate) nanocomposite integrated within cellulose fibers of a conventional filter paper. The analytical performance and the sensing mechanism are presented. Monitoring sweat loss in the human body while exercising is demonstrated using the integration of a wireless reader and a user-friendly interface. By addressing the barriers of cost, simplicity, and the truly in situ demanding measurements, this unique wearable sensor is expected to serve in the future in many different applications involving the on-body detection of biofluids, such as a monitoring tool of dehydration levels for athletes as well as a tool for enhancing the sport performance by providing an accurate recovery of the hydration status in daily exercises.

Ionophore-Based Optical Sensor for Urine Creatinine Determination.

Creatinine is a metabolite present in urine, and its concentration is used to diagnose and monitor kidney performance. For that reason, the development of new sensors to analyze this metabolite and obtain accurate results in a short period of time is necessary. An optical disposable sensor for monitoring creatinine levels in urine is described. The system, based on a new aryl-substituted calix[4]pyrrole synthetic receptor, has an unusual coextraction scheme. Due to the low p Ka values of creatininium (p Ka 4.8), a careful selection of a lipophilic pH indicator that works in acid medium is required. The sensor components were optimized, and the new sensor displays a good response time to creatinine (approximately 3 min) over a wide dynamic range (from 1 × 10-5 to 1 × 10-2 M). Moreover, the optical selectivity coefficients obtained for creatinine over common cations present in urine meet the requirements for real sample measurements. With a good sensor-to-sensor reproducibility (RSD, 5.1-6.9% in the middle of the range), this method provides a simple, quick, cost-effective, and selective alternative to the conventional methodology based on Jaffé's reaction.

A disposable, simple, fast and low-cost paper-based biosensor and its application to the determination of glucose in commercial orange juices.

A new biosensor for monitoring glucose levels in beverages is presented. The measurements are performed using potentiometric detection. Working electrodes are made using platinised paper as support and a biocompatible polymeric membrane made of a mixture of polyvinyl alcohol and chitosan containing glucose oxidase as the recognition layer. The system is based on the detection of the hydrogen peroxide generated by an enzymatic reaction performed in a highly sensitive, selective and simple way. The biosensors display suitable analytical performance (sensitivity -119.6 ±â€¯6.4 mV/dec in the 0.03-1.0 mM range with a limit of detection of 0.02 mM). Determination of glucose in commercial orange juices is presented. These results were validated against conventional standard methods, showing good accuracy and fast analytical response. The methodology presented herein does not require complex samples treatment, offering an alternative to conventional methods, particularly for determinations performed with minimal expertise and without a laboratory infrastructure.

Distributed electrochemical sensors: recent advances and barriers to market adoption.

Despite predictions of their widespread application in healthcare and environmental monitoring, electrochemical sensors are yet to be distributed at scale, instead remaining largely confined to R&D labs. This contrasts sharply with the situation for physical sensors, which are now ubiquitous and seamlessly embedded in the mature ecosystem provided by electronics and connectivity protocols. Although chemical sensors could be integrated into the same ecosystem, there are fundamental issues with these sensors in the three key areas of analytical performance, usability, and affordability. Nevertheless, advances are being made in each of these fields, leading to hope that the deployment of automated and user-friendly low-cost electrochemical sensors is on the horizon. Here, we present a brief survey of key challenges and advances in the development of distributed electrochemical sensors for liquid samples, geared towards applications in healthcare and wellbeing, environmental monitoring, and homeland security. As will be seen, in many cases the analytical performance of the sensor is acceptable; it is usability that is the major barrier to commercial viability at this moment. Were this to be overcome, the issue of affordability could be addressed. Graphical Abstract ᅟ.

A novel wireless paper-based potentiometric platform for monitoring glucose in blood.

A novel low-cost, compact and sensitive paper-based platform for the accurate monitoring of glucose in biological fluids is presented. Paper-based working and reference electrodes are combined to build a whole potentiometric cell, which also fits a sampling module for simple and fast determination of glucose in a single drop of blood. The working electrode is built using a platinized filter paper coated with a Nafion membrane that entraps the enzyme glucose oxidase; the reference electrode is made by casting a polyvinylbutyral-based membrane onto a conductive paper. The system works by detecting the hydrogen peroxide generated as a result of the enzymatic reaction. Selectivity is achieved due to the permselective behaviour of Nafion, while a significant enhancement of the sensitivity is reached by exploiting the Donnan-coupled formal potential. Under optimum conditions, a sensitivity of -95.9 ± 4.8 mV per decade in the 0.3-3 mM range is obtained. Validation of the measurements has been performed against standard methods in human serum and blood. Final integration with a wireless reader allows for truly in situ measurements with a less than 2 minute procedure including a two-point calibration, washing and measurement. This low-cost analytical device opens up new prospects for rapid diagnostic results in non-laboratory settings.

Characterization of a new ionophore-based ion-selective electrode for the potentiometric determination of creatinine in urine.

The optimization, analytical characterization and validation of a novel ion-selective electrode for the highly sensitive and selective determination of creatinine in urine is presented. A newly synthesized calix[4]pyrrole-based molecule is used as an ionophore for the enhanced recognition of creatininium cations. The calculation of the complex formation constants in the polymeric membrane with creatininium, potassium and sodium confirms the strong selective interactions between the ionophore and the target. The optimization of the potentiometric sensor presented here yields an outstanding analytical performance, with a linear range that spans from 1µM to 10mM and limit of detection of 10-6.2M. The calculation of the selectivity coefficients against most commonly found interferences also show significant improvements when compared to other sensors already reported. The performance of this novel sensor is tested by measuring creatinine in real urine samples (N=50) and comparing the values against the standard colorimetric approach (Jaffé's reaction). The results show that this sensor allows the fast and accurate determination of creatinine in real samples with minimal sample manipulation.

A Million Turnover Molecular Anode for Catalytic Water Oxidation.

Molecular ruthenium-based water oxidation catalyst precursors of general formula [Ru(tda)(Li )2 ] (tda2- is [2,2':6',2''-terpyridine]-6,6''-dicarboxylato; L1 =4-(pyren-1-yl)-N-(pyridin-4-ylmethyl)butanamide, 1 b; L2 =4-(pyren-1-yl)pyridine), 1 c), have been prepared and thoroughly characterized. Both complexes contain a pyrene group allowing ready and efficiently anchoring via π interactions on multi-walled carbon nanotubes (MWCNT). These hybrid solid state materials are exceptionally stable molecular water-oxidation anodes capable of carrying out more than a million turnover numbers (TNs) at pH 7 with an Eapp =1.45 V vs. NHE without any sign of degradation. XAS spectroscopy analysis before, during, and after catalysis together with electrochemical techniques allow their unprecedented oxidative ruggedness to be monitored and verified.

Recognition and Sensing of Creatinine.

Current methods for creatinine quantification suffer from significant drawbacks when aiming to combine accuracy, simplicity, and affordability. Here, an unprecedented synthetic receptor, an aryl-substituted calix[4]pyrrole with a monophosphonate bridge, is reported that displays remarkable affinity for creatinine and the creatininium cation. The receptor works by including the guest in its deep and polar aromatic cavity and establishing directional interactions in three dimensions. When incorporated into a suitable polymeric membrane, this molecule acts as an ionophore. A highly sensitive and selective potentiometric sensor suitable for the determination of creatinine levels in biological fluids, such as urine or plasma, in an accurate, fast, simple, and cost-effective way has thus been developed.

Sulphate-selective optical microsensors: overcoming the hydration energy penalty.

Novel membrane-free chemically modified polystyrene microspheres for the optical detection of sulphate in aqueous media are introduced. The working principle of this sensor is based on the surface mass-extraction equilibrium of the target species. This allows overcoming the strong hydration energy penalty, a typical problem for the detection of divalent anions. This optical sensor exhibits both enhanced sensitivity and selectivity, which allows the accurate detection of sulphate in biological samples. To illustrate these features the determination of sulphate in urine is presented.

Chloride-selective electrodes based on "two-wall" aryl-extended calix[4]pyrroles: combining hydrogen bonds and anion-π interactions to achieve optimum performance.

The performance of chloride-selective electrodes based on "two-wall" aryl-extended calix[4]pyrroles and multiwall carbon nanotubes is presented. The calix[4]pyrrole receptors bear two phenyl groups at opposite meso-positions. When the meso-phenyl groups are decorated with strong electron-withdrawing substituents, attractive anion-π interactions may exist between the receptor's aromatic walls and the sandwiched anion. These anion-π interactions are shown to significantly affect the selectivity of the electrodes. Calix[4]pyrrole, bearing a p-nitro withdrawing group on each of the meso-phenyl rings, afforded sensors that display anti-Hofmeister behavior against the lipophilic salicylate and nitrate anions. Based on the experimental data, a series of principles that help in predicting the suitability of synthetic receptors for use as anion-specific ionophores is discussed. Finally, the sensors deliver excellent results in the direct detection of chloride in bodily fluids.

Rubber-based substrates modified with carbon nanotubes inks to build flexible electrochemical sensors.

The development of a solid-contact potentiometric sensor based on conducting rubbers using a carbon nanotubes ink is described here. Commercial rubbers are turned into conductive ones by a simple and versatile method, i.e. painting an aqueous dispersion of single-walled carbon nanotubes on the polymer surface. On this substrate, both the working ion-selective electrode and the reference electrode are built in order to form an integrated potentiometric cell. As a proof-of-principle, selective potassium electrodes are fully characterized giving comparable performances to conventional electrodes (sensitivity, selectivity, stability, linear range, limit of detection and reproducibility). As an application of the rubber-based electrodes, a bracelet was constructed to measure potassium levels in artificial sweat. Since rubbers are ubiquitous in our quotidian life, this approach offers great promise for the generation of chemical information through daily objects.

A paper-based potentiometric cell for decentralized monitoring of Li levels in whole blood.

A novel approach to monitor Li levels in blood in decentralized (out of the lab) settings is presented. The approach uses a potentiometric cell fully made with filter paper as a support. Electrodes were built using carbon nanotubes ink to create a conductive path and a suitable polymeric membrane. Solid-state ion-selective electrodes for Li and a reference electrode were built and optimized. The results obtained on real samples of serum and whole blood are comparable with those obtained by conventional standard approaches. This platform shows an outstanding performance for the direct, fast and low-cost monitoring of Li levels in blood.

Evidence of Hybrid Excitons in Weakly Interacting Nanopeapods.

Nanopeapods, consisting of optically active π-conjugated molecules encapsulated inside of the cavity of carbon nanotubes, exhibit efficient photon emission in the visible spectral range. Combining optical experiments with ab initio theory, we show that the puzzling features observed in photoluminescence spectra are of excitonic nature. The subunits though being van der Waals bound are demonstrated to interact in the excited state, giving rise to the formation of hybrid excitons. We rationalize why this many-body effect makes such nanohybrids useful for optoelectronic devices.