Bright and ultrafast electron point source made of LaB6 nanotip.

The development of time-resolved transmission electron microscopy (TEM), ultrafast electron spectroscopy and pulsed X-ray sources relies on the realization of stable and high brightness sources of ultra-short electron bunches with a long service time. The flat photocathodes implanted in thermionic electron guns have been replaced by Schottky-type or cold-field emission sources driven by ultra-fast laser. Recently, lanthanum hexaboride (LaB6) nanoneedles have been reported to have high brightness and high emission stability when working in a continuous emission mode. Here, we prepare nano-field emitters from bulk LaB6 and we report on their use as ultra-fast electron sources. Using a high repetition rate laser in the infrared range, we present different field emission regimes as a function of the extraction voltage and laser intensity. The properties of the electron source (brightness, stability, energy spectrum and emission pattern) are determined for the different regimes. Our results show that LaB6 nanoneedles can be used as ultrafast and ultra-bright sources for time-resolved TEM, with better performances as compared to metallic ultra-fast field-emitters.

Detecting Dissociation Dynamics of Phosphorus Molecular Ions by Atom Probe Tomography.

Dissociation processes involving phosphorus cations were investigated during laser-assisted atom probe tomography of crystalline indium phosphide (InP). This technique not only allows the formation of medium-sized phosphorus cations by means of femtosecond laser pulses under ultrahigh vacuum and high electric field conditions but also allows one to study the time-resolved dissociation dynamics. Data reveal the formation of cations up to P232+ and their subsequent dissociation into two smaller Pk+ cations (k > 2). The use of a time- and position-sensitive detector combined with numerical calculations provided information related to the molecule orientation, decay time, and kinetic energy release during dissociation phenomena. Results suggest that the dissociation processes are most likely due to the emission of Pk2+ cations in excited states and their subsequent decay in low field regions during their flight toward the detector. This study provides operative guidelines to obtain information on dissociation processes using a tomographic atom probe as a reaction microscope and indicates the current capabilities and limitations of such an approach.

Photoassisted and multiphoton emission from single-crystal diamond needles.

Practical realization of stable and high brightness sources of ultra-short electron pulses is an important issue in the development of time-resolved electron microscopy for the study of ultra-fast dynamics in materials. Here, we report on the experimental investigation of static (in the dark) and pulsed (under illumination by sub-picosecond laser pulses at 1040 nm) electron emission from single-crystal diamond needles. A significant increase of electron emission current was detected under laser illumination. The nonlinear dependence of the emission current on the laser intensity and on the angle between the needle and the laser beam polarization axis suggests multi-photon emission processes. This interpretation is in agreement with electron spectroscopy measurements performed for electrons emitted at different bias voltages and different laser power levels and repetition rates. The remarkable feature of the diamond emitters is their stability under high average power of laser radiation. This provides a new highly efficient source of photoemitted electrons based on single-crystal diamond.

Dissociation of GaN2+ and AlN2+ in APT: Analysis of experimental measurements.

The use of a tip-shaped sample for the atom probe tomography technique offers the unique opportunity to analyze the dynamics of molecular ions in strong DC fields. We investigate here the stability of AlN2+ and GaN2+ dications emitted from an Al0.25Ga0.75N sample in a joint theoretical and experimental study. Despite the strong chemical resemblance of these two molecules, we observe only stable AlN2+, while GaN2+ can only be observed as a transient species. We simulate the emission dynamics of these ions on field-perturbed potential energy surfaces obtained from quantum chemical calculations. We show that the dissociation is governed by two independent processes. For all bound states, a mechanical dissociation is induced by the distortion of the potential energy surface in the close vicinity of the emitting tip. In the specific case of GaN2+, the relatively small electric dipole of the dication in its ground 13Σ- and excited 11Δ states induces a weak coupling with the electric field so that the mechanical dissociation into Ga+ + N+ lasts for sufficient time to be observed. By contrast, the AlN2+ mechanical dissociation leads to Al2+ + N which cannot be observed as a correlated event. For some deeply bound singlet excited states, the spin-orbit coupling with lower energy triplet states gives another chance of dissociation by system inter-system crossing with specific patterns observed experimentally in a correlated time of flight map.

Compositional accuracy of atom probe tomography measurements in GaN: Impact of experimental parameters and multiple evaporation events.

A systematic study of the biases occurring in the measurement of the composition of GaN by Atom Probe Tomography was carried out, in which the role of surface electric field and laser pulse intensity has been investigated. Our data confirm that the electric field is the main factor influencing the measured composition, which exhibits a deficiency of N at low field and a deficiency of Ga at high field. The deficiency of Ga at high field is interpreted in terms of preferential evaporation of Ga. The detailed analysis of multiple evaporation events reveals that the measured composition is not affected by pile-up phenomena occurring in detection system. The analysis of correlation histograms yields the signature of the production of neutral N2 due to the dissociation of GaN32+ ions. However, the amount of N2 neutral molecules that can be detected cannot account for the N deficiency found at low field. Therefore, we propose that further mechanisms of neutral N evaporation could be represented by dissociation reactions such as GaN+→ Ga++ N and GaN2+→ Ga2++ N.

Electronic structure and stability of the SiO2+ dications produced in tomographic atom probe experiments.

The molecular electronic states of the SiO2+ dication have been investigated in a joint theoretical and experimental analysis. The use of a tip-shaped sample for tomographic atom probe analysis offers the unique opportunity to produce and to analyze the lifetime of some excited states of this dication. The perturbation brought by the large electric field of the polarized tip along the ion trajectory is analyzed by means of molecular dynamics simulation. For the typical electric fields used in the experiment, the lowest energy triplet states spontaneously dissociate, while the lowest energy singlet states do not. We show that the emission process leads to the formation of some excited singlet state, which dissociates by means of spin-orbit coupling with lower-energy triplet states to produce specific patterns associated with Si+ + O+ and Si2+ + O dissociation channels. These patterns are recorded and observed experimentally in a correlated time-of-flight map.

Bespoke video vignettes - an approach to enhancing reflective learning developed by dental undergraduates and their clinical teachers.

This study explores the selective use of video as a medium to support reflective processes as related to dental undergraduate learning. With the objective of developing and enhancing high-quality adult dental care, the use of compiled video materials created in an undergraduate clinical setting was investigated. Video cameras were used to capture elements of reflection-in-action and reflection-on-action typically found during everyday clinical practice. 'Gold standard' or 'textbook outcomes' are rarely, if ever, fully achieved in dental practice. Real-life clinical experiences offer challenges and opportunities for both teachers and students to engage with reflective learning processes. The materials generated allowed for an experience of individual reflective learning and the creation of a data bank or archive with potential use for the benefit of a wider student cohort. Various aspects of the students' views and comments on the process of reflection were reported and explored by means of a semi-structured focus group moderated by a linked educational advisor.

Role of the resistivity of insulating field emitters on the energy of field-ionised and field-evaporated atoms.

In order to improve the accuracy of laser atom probe analyses, it is important to understand all the physical processes induced by the combination of the high electrical field and the femtosecond laser beam during field evaporation. New information can be accessed from the energy of evaporated surface atoms or field-ionised atoms of an imaging gas. In order to study the ions energy, we combine La-APT and FIM analyses in a new experimental setup equipped with electrostatic lenses. We report measurements for semiconductors and oxides and we study the influence of the illumination conditions (laser power and wavelength), the evaporation rate, the sample geometry and the tip preparation processes. The results are discussed taking into account the resistive properties of non-metallic samples and the photo-stimulated conductivity. This work clarifies the role of the laser and DC field in the energy deficit of field evaporated ions.

Ghrelin receptor-knockout mice display alterations in circadian rhythms of activity and feeding under constant lighting conditions.

Ghrelin is an orexigenic hormone produced by the stomach. Ghrelin, however, may also be a modulator of the circadian system given that ghrelin receptors are expressed in the master clock, the suprachiasmatic nucleus (SCN) and several outputs of this region. To investigate this, we performed analyses of running wheel activity and neuronal activation in wild type (WT) and growth hormone secretagogue receptor-knockout (GHSR-KO) mice under various lighting conditions. GHSR-KO and WT mice were maintained under constant dark (DD) or constant light (LL) with ad libitum access to food before being placed on a schedule of temporally restricted access to food (4 h/day) for 2 weeks. There were no differences between KO and WT mice in free-running period under DD, but GHSR-KO mice required more days to develop a high level of food anticipatory activity, and this was lower than that observed in WT mice. Under LL, GHSR-KO mice showed greater activity overall, lengthening of their circadian period, and more resistance to the disorganisational effects of LL. Furthermore, GHSR-KO mice showed greater activity overall, and greater activity in anticipation of a scheduled meal under LL. These behavioral effects were not correlated with changes in the circadian expression of the Fos, Per1 or Per2 proteins under any lighting conditions. These results suggest that the ghrelin receptor plays a role in modulating the activity of the circadian system under normal conditions and under restricted feeding schedules, but does so through mechanisms that remain to be determined.

The management of defective resin composite restorations: current trends in dental school teaching in Japan.

AIM: The aim of this article is to investigate the contemporary teaching of the management of defective direct resin composite restorations in dental schools in Japan. METHODS: A questionnaire relating to the teaching of the management of defective resin composite restorations was developed and e-mailed to 29 dental schools in Japan in 2010. RESULTS: Completed responses were received from 19 of the 29 invited schools (response rate = 66%). Eighteen schools (95%) report that they included the teaching of repair of direct defective resin composite restorations in their dental school programs. Thirteen schools reported that they included both clinical and didactic instruction on the repair of direct resin composite restorations. Fourteen schools did not teach any mechanical roughening of the exposed resin composite restoration surface before undertaking a repair. The most commonly reported treatment was acid etching with phosphoric acid (12 schools). The most commonly taught material for completing repairs was a flowable resin composite (16 schools). CONCLUSION: The teaching of repair of defective resin composite restorations is well established within many Japanese dental schools, to a greater extent than in some other regions of the world. The impact of this teaching on subsequent clinical practices in Japan should be investigated. Furthermore, it is concluded that there is a need for much stronger leadership in operative and conservative dentistry, ideally at the global level, to resolve differences in key aspects of operative procedures such as repairs.

Morphology control of nanostructures: Na-doped PbTe-PbS system.

The morphology of crystalline precipitates in a solid-state matrix is governed by complex but tractable energetic considerations driven largely by volume strain energy minimization and anisotropy of interfacial energies. Spherical precipitate morphologies are favored by isotropic systems, while anisotropic interfacial energies give energetic preference to certain crystallographically oriented interfaces, resulting in a faceted precipitate morphology. In conventional solid-solution precipitation, a precipitate's morphological evolution is mediated by surface anchoring of capping molecules, which dramatically alter the surface energy in an anisotropic manner, thereby providing exquisite morphology control during crystal growth. Herein, we present experimental evidence and theoretical validation for the role of a ternary element (Na) in controlling the morphology of nanoscale PbS crystals nucleating in a PbTe matrix, an important bulk thermoelectric system. The PbS nanostructures formed by phase separation from a PbI(2)-doped or undoped PbTe matrix have irregular morphologies. However, replacing the iodine dopant with Na (1-2 mol %) alters dramatically the morphology of the PbS precipitates. Segregation of Na at PbTe/PbS interfaces result in cuboidal and truncated cuboidal morphologies for PbS. Using analytical scanning/transmission electron microscopy and atom-probe tomography, we demonstrate unambiguously that Na partitions to the precipitates and segregates at the matrix/precipitate interfaces, inducing morphological anisotropy of PbS precipitates. First-principles and semiclassical calculations reveal that Na as a solute in PbTe has a higher energy than in PbS and that Na segregation at a (100) PbTe/PbS interface decreases the total energy of matrix/precipitate system, resulting in faceting of PbS precipitates. These results provide an impetus for a new strategy for controlling morphological evolution in matrix/precipitate systems, mediated by solute partitioning of ternary additions.

Ghrelin-deficient mice have fewer orexin cells and reduced cFOS expression in the mesolimbic dopamine pathway under a restricted feeding paradigm.

Ghrelin is an orexigenic stomach peptide previously found to be important for the full display of anticipatory locomotor activity and hypothalamic neuronal activation that precedes a daily scheduled meal in mice. Ghrelin is also important for food-related motivation and seems to have direct effects in the mesocorticolimbic dopamine reward system. Here we hypothesized that neuronal activation in reward-related areas in anticipation of a scheduled meal could be mediated by elevated ghrelin induced by scheduled feeding, and therefore this would be attenuated in ghrelin receptor knock-out (GHSR KO) animals. We found that this was indeed the case for the ventral tegmental area and the shell, but not the core, of the nucleus accumbens. In addition, our results show a reduction in the proportion of activated orexin-immunoreactive (IR) neurons in GHSR KO animals in anticipation of the scheduled meal in comparison to the proportion of activated orexin neurons in wild type (WT) mice. Interestingly we observed that both GHSR and ghrelin KO mice had fewer orexin-IR cells than their WT littermates suggesting that lack of ghrelin or sensitivity to ghrelin may play a role in the development of the orexin system. Our data also suggest that ghrelin may mediate food anticipation, in part, by stimulating both the orexin system and the mesolimbic reward system.

Teaching of direct composite restoration repair in undergraduate dental schools in the United Kingdom and Ireland.

AIM: To investigate aspects of the teaching of restoration repair as a minimally invasive alternative to the replacement of defective direct composite restorations in teaching programmes in undergraduate curricula in dental schools in the United Kingdom and Ireland. METHODS: An online questionnaire which sought information in relation to the current teaching of composite restoration repair was developed and distributed to the 17 established UK and Irish dental schools with undergraduate teaching programmes in Spring 2010. RESULTS: Completed responses were received from all 17 schools (response rate= 100%). Fifteen schools reported that they included teaching of repair techniques for defective direct composite restorations in their programme. Of the two remaining schools, one indicated that it would introduce teaching of repair techniques during the next five years. The most common indication for a composite repair was that of 'tooth substance preservation' (15 schools). The defects in restorations considered appropriate for repair rather than replacement by the largest number of schools included partial loss of restoration (13 schools) and marginal defects (12 schools). The most commonly taught surface treatment when performing a repair was mechanical roughening of the existing composite with removal of the surface layer (14 schools). Thirteen schools taught etching and the application of an adhesive bonding agent to the prepared surfaces, while the most commonly taught material for completing the repair was a hybrid composite resin (12 schools). Popular finishing implements included diamond finishing instruments (13 schools) and finishing discs (11 schools). CONCLUSION: Not withstanding reluctance amongst general dental practitioners, the teaching of repair of a defective composite restoration, rather than total restoration replacement, is firmly established within UK and Irish dental school programmes. Repair techniques have clear advantages for patients, not least including a minimally invasive approach to treatment and avoidance of unnecessary loss of tooth tissue and pulpal damage. Dental practitioners should look more to repair techniques when managing defective composite restorations and clinical dental teachers should continue to research and refine composite repair techniques.

Competing clocks: metabolic status moderates signals from the master circadian pacemaker.

Food anticipation and its behavioural manifestation, food anticipatory activity (FAA), require entrainment of a suprachiasmatic nucleus (SCN) independent circadian mechanism, a food entrainable oscillator (FEO), with an unknown neural substrate. While the FEO entrains to fasting/feeding related cues and drives FAA independently of the pacemaker in the SCN, it must disengage the suppressing signals of the SCN for the behavioural and physiological manifestations of meal anticipation to occur outside of the typical period of arousal. This review provides a brief overview of mammalian circadian biology before summarizing experimental data demonstrating several mechanisms by which this may occur, including: reducing activation of SCN cells receiving retinal input, transient disorganization of SCN outputs, and reduced sensitivity to SCN signals in hypothalamic sites responsible for integrating homeostatic and circadian information. Further investigation of these mechanisms will be key to elucidating pharmacological or behavioural interventions that suppress the negative psychological and health effects of light-driven circadian rhythms in humans, specifically those with work schedules that do not conform to the solar day.

Teaching of the repair of defective composite restorations in Scandinavian dental schools.

Given increased tooth retention into later years of life, dentists face increasing challenges in maintaining teeth with extensive composite restorations. Accompanying the increase in placement of composite restorations in general practice, there has also been increased evidence that repair, rather than replacement, of composite restorations is being increasingly considered as a treatment option. Previous work has demonstrated that such techniques are often underutilised in practice. The aim of this study was to examine contemporary teaching of composite repair techniques in Scandinavian dental schools. A questionnaire was distributed by email to each of the 12 Scandinavian dental schools in late 2010/early 2011. This questionnaire sought information on the undergraduate teaching of composite repair techniques as well as indications and materials utilised for this technique. A 100% response rate was achieved (12 schools). Eleven of the 12 respondent schools indicated that they included the teaching of composite repair techniques within their dental school programme. The most commonly reported indications for the teaching of the repair of direct composite restorations were tooth substance preservation (11 schools) and reduced risk of harmful effects on the pulp (10 schools). The most commonly taught surface treatment was mechanical roughening of the existing composite restoration, including the removal of the surface layer of material, prior to application of fresh composite (11 schools). Overall, the results of this study showed that the teaching of composite repair techniques is established within Scandinavian dental schools. This may influence the practising habits of dentists graduating from these schools when considering treatment options for defective composite restorations.

Defective dental restorations: to repair or not to repair? Part 1: direct composite restorations.

The presentation of patients with failing dental restorations that exhibit minor defects is a common clinical situation in everyday dental practice. The repair of such restorations, rather than replacement, is increasingly considered to be a viable alternative to the replacement of the defective restoration. This first of two papers considers indications and techniques for the repair of defective direct composite restorations. It is possible that some dental practitioners are unaware of the option of repair rather than replacement of composite restorations. This article provides an overview of contemporary knowledge and understanding of restoration repair in the clinical management of defective composite restorations.

Defective dental restorations: to repair or not to repair? Part 2: all-ceramics and porcelain fused to metal systems.

With the increasing use of ceramics in restorative dentistry, and trends to extend restoration longevity through the use of minimal interventive techniques, dental practitioners should be familiar with the factors that may influence the decision either to repair or replace fractured metal-ceramic and all-ceramic restorations and, also, the materials and techniques available to repair these restorations. This second of two papers addresses the possible modes of failure of ceramic restorations and outlines indications and techniques in this developing aspect of restoration repair in clinical practice.

State-of-the-art techniques in operative dentistry: contemporary teaching of posterior composites in UK and Irish dental schools.

AIM: Advances of composite systems and their application have revolutionised the management of posterior teeth affected by caries, facilitating a minimally invasive approach. Previous surveys have indicated that the teaching of posterior composites within dental schools was developing, albeit not keeping pace with clinical evidence and the development of increasingly predictable techniques and materials. Concurrently, surveys of dental practice indicate that dental amalgam still predominates as the 'material of choice' for the restoration of posterior teeth within UK general dental practice. In light of such considerations, the aim of this study was to investigate current teaching of posterior composites in Irish and UK dental schools. METHODS: An online questionnaire which sought information in relation to the current teaching of posterior composites was developed and distributed to the 17 established Irish and UK dental schools with undergraduate teaching programmes in late 2009. RESULTS: Completed responses were received from all 17 schools (response rate = 100%). All 17 schools taught the placement of occlusal and two-surface occlusoproximal composites in premolar and permanent molar teeth. Two schools did not teach placement of three-surface occlusoproximal composites in either premolars or molars. In their preclinical courses, ten schools taught posterior composites before teaching dental amalgams. Fifty-five percent of posterior restorations placed by dental students were of composite (range = 10-90%) and 44% amalgam (range = 10-90%), indicating an increase of 180% in the numbers of posterior composites placed over the past five years. Diversity was noted in the teaching of clinical techniques and students at different schools are trained with different composites and bonding systems. Some cause for concern was noted in the teaching of certain techniques that were not in keeping with existing best evidence, such as the teaching of transparent matrix bands and light-transmitting wedges for occluso-proximal composites (eight schools) and the teaching of bevels on the cavosurface enamel margins of both the occlusal and proximal box margins (three schools). CONCLUSION: The teaching of posterior composites in the Irish and UK dental schools has substantially increased over the last five years. Dental students in these schools often gain more experience in the placement of posterior composites than amalgam. However, practice trends indicate that a majority of GDPs continue to place amalgam in preference to composite, thereby suggesting a source of tension as current dental students emerge into the dental workforce over the coming years. There is, as a consequence, a challenge to the dental profession and its funding agencies in the UK to encourage more of a shift towards the minimally interventive use of composite systems in the restoration of posterior teeth, in particular among established practitioners.