Kinetic Evaluation on Lithium Polysulfide in Weakly Solvating Electrolyte toward Practical Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are highly considered as next-generation energy storage techniques. Weakly solvating electrolyte with low lithium polysulfide (LiPS) solvating power promises Li anode protection and improved cycling stability. However, the cathodic LiPS kinetics is inevitably deteriorated, resulting in severe cathodic polarization and limited energy density. Herein, the LiPS kinetic degradation mechanism in weakly solvating electrolytes is disclosed to construct high-energy-density Li-S batteries. Activation polarization instead of concentration or ohmic polarization is identified as the dominant kinetic limitation, which originates from higher charge-transfer activation energy and a changed rate-determining step. To solve the kinetic issue, a titanium nitride (TiN) electrocatalyst is introduced and corresponding Li-S batteries exhibit reduced polarization, prolonged cycling lifespan, and high actual energy density of 381 Wh kg-1 in 2.5 Ah-level pouch cells. This work clarifies the LiPS reaction mechanism in protective weakly solvating electrolytes and highlights the electrocatalytic regulation strategy toward high-energy-density and long-cycling Li-S batteries.

Pd(II)-Catalyzed ß-C(sp3)-H Alkynylation of Alanine in Di- and Tripeptides with Asn as an Endogenous Directing Group.

The introduction of alkyne moieties into peptides remains in demand as it represents a promising approach for further structural diversification of peptides. Herein, we describe the Pd(II)-catalyzed C(sp3)-H alkynylation of Ala-Asn-embedded di- and tripeptides using Asn as the endogenous lead group. In addition, a key building block for the glycopeptide Tyc4PG-14 and Tyc4PG-15 was produced by our methodology.

Kinetic Promoters for Sulfur Cathodes in Lithium-Sulfur Batteries.

ConspectusLithium-sulfur (Li-S) batteries have attracted worldwide attention as promising next-generation rechargeable batteries due to their high theoretical energy density of 2600 Wh kg-1. The actual energy density of Li-S batteries at the pouch cell level has significantly exceeded that of state-of-the-art Li-ion batteries. However, the overall performances of Li-S batteries under practical working conditions are limited by the sluggish conversion kinetics of the sulfur cathodes. To overcome the above challenge, various kinetic promotion strategies have been proposed to accelerate the multiphase and multi-electron cathodic redox reactions between sulfur, lithium polysulfides (LiPSs), and lithium sulfide. Nowadays, kinetic promoters have been massively employed in sulfur cathodes to achieve Li-S batteries with high energy densities, high rates, and long lifespans. A comprehensive and timely summary of cutting-edge kinetic promoters for sulfur cathodes is of great essence to afford an in-depth understanding of the unique Li-S electrochemistry.In this Account, we outline the recent efforts on the design of sulfur cathode kinetic promoters for advanced Li-S batteries. The latest progress is discussed in detail regarding heterogeneous, homogeneous, and semi-immobilized kinetic promoters. Heterogeneous promoters, representatively known as electrocatalysts, function mainly by reducing the energy barriers of the interfacial electrochemical reactions. The working mechanism, activity regulation strategies, and reconstitution/deactivation processes of the heterogeneous promoters are reviewed to provide guiding principles for rational design. In comparison, homogeneous promoters are able to fully contact with the reaction interfaces and regulate the electron/ion-inaccessible reactants in working Li-S batteries. Redox mediators and redox comediators are typical homogeneous promoters. The former establishes extra chemical reaction pathways to circumvent the originally sluggish steps and boost the overall kinetics, while the latter fundamentally modifies the LiPS molecules to enhance their redox kinetics. For semi-immobilized promoters, the active units are generally anchored on the cathode substrate through flexible chains with mobile characteristics. Such a design endows the promoter with both heterogeneous and homogeneous characteristics to comprehensively regulate the multiphase sulfur redox reactions involving both mobile and immobile reactants.Overall, this Account summarizes the fundamental electrochemistry, design principles, and practical promotion effects of the various kinetic promoters used for the sulfur cathodes in Li-S batteries. We believe that this Account will provide an in-depth and cutting-edge understanding of the unique sulfur electrochemistry, thereby providing guidance for further development of high-performance Li-S batteries and analogous rechargeable battery systems.

Anion-Involved Solvation Structure of Lithium Polysulfides in Lithium-Sulfur Batteries.

Lithium polysulfides (LiPSs) are pivotal intermediates involved in all the cathodic reactions in lithium-sulfur (Li-S) batteries. Elucidating the solvation structure of LiPSs is the first step for rational design of electrolyte and improving Li-S battery performances. Herein, we investigate the solvation structure of LiPSs and find that Li salt anions tend to enter the first solvation sheath of LiPSs and form contact ion pairs in electrolyte. The anion-involved solvation structure of LiPSs significantly influences the intrinsic kinetics of the sulfur redox reactions. In particular, the LiPS solvation structure modified by lithium bis(fluorosulfonyl)imide endows Li-S batteries with reduced polarization and enhanced rate performances under high sulfur areal loading and lean electrolyte volume conditions. This work updates the fundamental understanding of the solvation chemistry of LiPSs and highlights electrolyte engineering for promoting the performances of Li-S batteries.

Improving Rate Performance of Encapsulating Lithium-Polysulfide Electrolytes for Practical Lithium-Sulfur Batteries.

The cycle life of high-energy-density lithium-sulfur (Li-S) batteries is severely plagued by the incessant parasitic reactions between Li metal anodes and reactive Li polysulfides (LiPSs). Encapsulating Li-polysulfide electrolyte (EPSE) emerges as an effective electrolyte design to mitigate the parasitic reactions kinetically. Nevertheless, the rate performance of Li-S batteries with EPSE is synchronously suppressed. Herein, the sacrifice in rate performance by EPSE is circumvented while mitigating parasitic reactions by employing hexyl methyl ether (HME) as a co-solvent. The specific capacity of Li-S batteries with HME-based EPSE is nearly not decreased at 0.1 C compared with conventional ether electrolytes. With an ultrathin Li metal anode (50 µm) and a high-areal-loading sulfur cathode (4.4 mgS cm-2 ), a longer cycle life of 113 cycles was achieved in HME-based EPSE compared with that of 65 cycles in conventional ether electrolytes at 0.1 C. Furthermore, both high energy density of 387 Wh kg-1 and stable cycle life of 27 cycles were achieved in a Li-S pouch cell (2.7 Ah). This work inspires the feasibility of regulating the solvation structure of LiPSs in EPSE for Li-S batteries with balanced performance.

Representative Data Selection for Efficient Medical Incremental Learning.

To train a deep neural network relies on a large amount of annotated data. In special scenarios like industry defect detection and medical imaging, it is hard to collect sufficient labeled data all at once. Newly annotated data may arrive incrementally. In practice, we also prefer our target model to improve its capability gradually as new data comes in by quick re-training. This work tackles this problem from a data selection prospective by constraining ourselves to always retrain the target model with a fix amount of data after new data comes in. A variational autoencoder (VAE) and an adversarial network are combined for data selection, achieving fast model retraining. This enables the target model to continually learn from a small training set while not losing the information learned from previous iterations, thus incrementally adapting itself to new-coming data. We validate our framework on the LGG Segmentation dataset for the semantic segmentation task.Clinical relevance- The proposed VAE-based data selection model combined with adversarial training can choose a representative and reliable subset of data for time-efficient medical incremental learning. Users can immediately see the improvement of the medical segmentation model whenever new annotated images are contributed (after a few minutes of model retraining).

Inductive Effect on Single-Atom Sites.

Single-atom catalysts exhibit promising electrocatalytic activity, a trait that can be further enhanced through the introduction of heteroatom doping within the carbon skeleton. Nonetheless, the intricate relationship between the doping positions and activity remains incompletely elucidated. This contribution sheds light on an inductive effect of single-atom sites, showcasing that the activity of the oxygen reduction reaction (ORR) can be augmented by reducing the spatial gap between the doped heteroatom and the single-atom sites. Drawing inspiration from this inductive effect, we propose a synthesis strategy involving ligand modification aimed at precisely adjusting the distance between dopants and single-atom sites. This precise synthesis leads to optimized electrocatalytic activity for the ORR. The resultant electrocatalyst, characterized by Fe-N3P1 single-atom sites, demonstrates remarkable ORR activity, thus exhibiting great potential in zinc-air batteries and fuel cells.

Molecular Recognition Regulates Coordination Structure of Single-Atom Sites.

Coordination engineering for single-atom sites has drawn increasing attention, yet its chemical synthesis remains a tough issue, especially for tailorable coordination structures. Herein, a molecular recognition strategy is proposed to fabricate single-atom sites with regulable local coordination structures. Specifically, a heteroatom-containing ligand serves as the guest molecule to induce coordination interaction with the metal-containing host, precisely settling the heteroatoms into the local structure of single-atom sites. As a proof of concept, thiophene is selected as the guest molecule, and sulfur atoms are successfully introduced into the local coordination structure of iron single-atom sites. Ultrahigh oxygen reduction electrocatalytic activity is achieved with a half-wave potential of 0.93 V versus reversible hydrogen electrode. Furthermore, the strategy possesses excellent universality towards diversified types of single-atom sites. This work makes breakthroughs in the fabrication of single-atom sites and affords new opportunities in structural regulation at the atomic level.

Correlating Polysulfide Solvation Structure with Electrode Kinetics towards Long-Cycling Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are promising due to ultrahigh theoretical energy density. However, their cycling lifespan is crucially affected by the electrode kinetics of lithium polysulfides. Herein, the polysulfide solvation structure is correlated with polysulfide electrode kinetics towards long-cycling Li-S batteries. The solvation structure derived from strong solvating power electrolyte induces fast anode kinetics and rapid anode failure, while that derived from weak solvating power electrolyte causes sluggish cathode kinetics and rapid capacity loss. By contrast, the solvation structure derived from medium solvating power electrolyte balances cathode and anode kinetics and improves the cycling performance of Li-S batteries. Li-S coin cells with ultra-thin Li anodes and high-S-loading cathodes deliver 146 cycles and a 338 Wh kg-1 pouch cell undergoes stable 30 cycles. This work clarifies the relationship between polysulfide solvation structure and electrode kinetics and inspires rational electrolyte design for long-cycling Li-S batteries.

Cathode Kinetics Evaluation in Lean-Electrolyte Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries afford great promise on achieving practical high energy density beyond lithium-ion batteries. Lean-electrolyte conditions constitute the prerequisite for achieving high-energy-density Li-S batteries but inevitably deteriorates battery performances, especially the sulfur cathode kinetics. Herein, the polarizations of the sulfur cathode are systematically decoupled to identify the key kinetic limiting factor in lean-electrolyte Li-S batteries. Concretely, an electrochemical impedance spectroscopy combined galvanostatic intermittent titration technique method is developed to decouple the cathodic polarizations into activation, concentration, and ohmic parts. Therein, activation polarization during lithium sulfide nucleation emerges as the dominant polarization as the electrolyte-to-sulfur ratio (E/S ratio) decreases, and the sluggish interfacial charge transfer kinetics is identified as the main reason for degraded cell performances under lean-electrolyte conditions. Accordingly, a lithium bis(fluorosulfonyl)imide electrolyte is proposed to decrease activation polarization, and Li-S batteries adopting this electrolyte provide a discharge capacity of 985 mAh g-1 under a low E/S ratio of 4 µL mg-1 at 0.2 C. This work identifies the key kinetic limiting factor of lean-electrolyte Li-S batteries and provides guidance on designing rational promotion strategies to achieve advanced Li-S batteries.

Reforming the Uniformity of Solid Electrolyte Interphase by Nanoscale Structure Regulation for Stable Lithium Metal Batteries.

The stability of high-energy-density lithium metal batteries depends on the uniformity of solid electrolyte interphase (SEI) on lithium metal anodes. Rationally improving SEI uniformity is hindered by poorly understanding the effect of structure and components of SEI on its uniformity. Herein, a bilayer structure of SEI formed by isosorbide dinitrate (ISDN) additives in localized high-concentration electrolytes was demonstrated to improve SEI uniformity. In the bilayer SEI, LiNx Oy generated by ISDN occupies top layer and LiF dominates bottom layer next to anode. The uniformity of lithium deposition is remarkably improved with the bilayer SEI, mitigating the consumption rate of active lithium and electrolytes. The cycle life of lithium metal batteries with bilayer SEI is three times as that with common anion-derived SEI under practical conditions. A prototype lithium metal pouch cell of 430 Wh kg-1 undergoes 173 cycles. This work demonstrates the effect of a reasonable structure of SEI on reforming SEI uniformity.

Electrolyte Design for Improving Mechanical Stability of Solid Electrolyte Interphase in Lithium-Sulfur Batteries.

Practical lithium-sulfur (Li-S) batteries are severely plagued by the instability of solid electrolyte interphase (SEI) formed in routine ether electrolytes. Herein, an electrolyte with 1,3,5-trioxane (TO) and 1,2-dimethoxyethane (DME) as co-solvents is proposed to construct a high-mechanical-stability SEI by enriching organic components in Li-S batteries. The high-mechanical-stability SEI works compatibly in Li-S batteries. TO with high polymerization capability can preferentially decompose and form organic-rich SEI, strengthening mechanical stability of SEI, which mitigates crack and regeneration of SEI and reduces the consumption rate of active Li, Li polysulfides, and electrolytes. Meanwhile, DME ensures high specific capacity of S cathodes. Accordingly, the lifespan of Li-S batteries increases from 75 cycles in routine ether electrolyte to 216 cycles in TO-based electrolyte. Furthermore, a 417 Wh kg-1 Li-S pouch cell undergoes 20 cycles. This work provides an emerging electrolyte design for practical Li-S batteries.

An Organodiselenide Comediator to Facilitate Sulfur Redox Kinetics in Lithium-Sulfur Batteries with Encapsulating Lithium Polysulfide Electrolyte.

Lithium-sulfur (Li-S) batteries are regarded as promising high-energy-density energy storage devices. However, the cycling stability of Li-S batteries is restricted by the parasitic reactions between Li metal anodes and soluble lithium polysulfides (LiPSs). Encapsulating LiPS electrolyte (EPSE) can efficiently suppress the parasitic reactions but inevitably sacrifices the cathode sulfur redox kinetics. To address the above dilemma, a redox comediation strategy for EPSE is proposed to realize high-energy-density and long-cycling Li-S batteries. Concretely, dimethyl diselenide (DMDSe) is employed as an efficient redox comediator to facilitate the sulfur redox kinetics in Li-S batteries with EPSE. DMDSe enhances the liquid-liquid and liquid-solid conversion kinetics of LiPS in EPSE while maintains the ability to alleviate the anode parasitic reactions from LiPSs. Consequently, a Li-S pouch cell with a high energy density of 359 Wh kg-1 at cell level and stable 37 cycles is realized. This work provides an effective redox comediation strategy for EPSE to simultaneously achieve high energy density and long cycling stability in Li-S batteries and inspires rational integration of multi-strategies for practical working batteries.

Polyphenolic-modified cellulose acetate membrane for bone regeneration through immunomodulation.

To enhance the bioactivity of cellulosic derivatives has become an important strategy to promote their value for clinical applications. Herein, protocatechualdehyde (PCA), a polyphenolic molecule, was used to modify a cellulose acetate (CA) membrane by combining with metal ions to confer an immunomodulatory activity. The PCA-modified CA membrane has shown a significant radical scavenging activity, thereby suppressed the inflammatory response and created a favorable immune microenvironment for osteogenesis and mineralization. Moreover, addition of metal ions could further stimulate the osteogenic differentiation of stem cells and accelerate bone regeneration both in vitro and in vivo. This study may provide a strategy to promote the immunomodulatory activity of cellulose-based biomaterials for bone regeneration.

Dilute Alloying to Implant Activation Centers in Nitride Electrocatalysts for Lithium-Sulfur Batteries.

Dilute alloying is an effective strategy to tune properties of solid catalysts but is rarely leveraged in complex reactions beyond small molecule conversion. In this work, dilute dopants are demonstrated to serve as activating centers to construct multiatom catalytic domains in metal nitride electrocatalysts for lithium-sulfur (Li-S) batteries, of which the sulfur cathode suffers from sluggish and complex conversion reactions. With titanium nitride (TiN) as a model system, the dilute cobalt alloying is shown to greatly improve the reaction kinetics while inducing negligible catalyst reconstruction. Compared to the pristine TiN, the dilute nitride alloy catalyst enables onefold increase in the high rate (2.0 C) capacities of Li-S batteries, as well as an impressively low cyclic decay rate of 0.17% at a sulfur loading of 4.0 mgS cm-2 . This work opens up new opportunities toward the rational design of Li-S electrocatalysts by dilute alloying and also enlightens the understandings of complex domain-catalyzed reactions in energy applications.

Taming Solvent-Solute Interaction Accelerates Interfacial Kinetics in Low-Temperature Lithium-Metal Batteries.

Lithium (Li)-metal batteries promise energy density beyond 400 Wh kg-1 , while their practical operation at an extreme temperature below -30 °C suffers severe capacity deterioration. Such battery failure highly relates to the remarkably increased kinetic barrier of interfacial processes, including interfacial desolvation, ion transportation, and charge transfer. In this work, the interfacial kinetics in three prototypical electrolytes are quantitatively probed by three-electrode electrochemical techniques and molecular dynamics simulations. Desolvation as the limiting step of interfacial processes is validated to dominate the cell impedance and capacity at low temperature. 1,3-Dioxolane-based electrolyte with tamed solvent-solute interaction facilitates fast desolvation, enabling the practical Li|LiNi0.5 Co0.2 Mn0.3 O2 cells at -40 °C to retain 66% of room-temperature capacity and withstand remarkably fast charging rate (0.3 C). The barrier of desolvation dictated by solvent-solute interaction environments is quantitatively uncovered. Regulating the solvent-solute interaction by low-affinity solvents emerges as a promising solution to low-temperature batteries.

BRICS report of 2021: The distribution and antimicrobial resistance profile of clinical bacterial isolates from blood stream infections in China / 中华临床感染病杂志

Objective:To report the results of national surveillance on the distribution and antimicrobial resistance profile of clinical bacterial isolates from bloodstream infections in China in 2021.Methods:The clinical bacterial strains isolated from blood culture from member hospitals of Blood Bacterial Resistant Investigation Collaborative System (BRICS) were collected during January 2021 to December 2021. Antibiotic susceptibility tests were conducted by agar dilution or broth dilution methods recommended by Clinical Laboratory Standards Institute (CLSI). WHONET 5.6 was used to analyze data.Results:During the study period, 11 013 bacterial strains were collected from 51 hospitals, of which 2 782 (25.3%) were Gram-positive bacteria and 8 231 (74.7%) were Gram-negative bacteria. The top 10 bacterial species were Escherichia coli (37.6%), Klebsiella pneumoniae (18.9%), Staphylococcus aureus (9.8%), coagulase-negative Staphylococci (6.3%), Pseudomonas aeruginosa (3.6%), Enterococcus faecium (3.6%), Acinetobacter baumannii (2.8%), Enterococcus faecalis (2.7%), Enterobacter cloacae (2.5%) and Klebsiella spp (2.1%). The prevalence of methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-resistant coagulase-negative Staphylococcus aureus were 25.3% and 76.8%, respectively. No glycopeptide- and daptomycin-resistant Staphylococci was detected; more than 95.0% of Staphylococcus aureus were sensitive to ceftobiprole. No vancomycin-resistant Enterococci strains were detected. The rates of extended spectrum B-lactamase (ESBL)-producing isolated in Escherichia coli, Klebsiella pneumoniae and Proteus mirabilis were 49.6%, 25.5% and 39.0%, respectively. The prevalence rates of carbapenem-resistance in Escherichia coli and Klebsiella pneumoniae were 2.2% and 15.8%, respectively; 7.9% of carbapenem-resistant Klebsiella pneumoniae was resistant to ceftazidime/avibactam combination. Ceftobiprole demonstrated excellent activity against non-ESBL-producing Escherichia coli and Klebsiella pneumoniae. Aztreonam/avibactam was highly active against carbapenem-resistant Escherichia coli and Klebsiella pneumoniae. The prevalence rate of carbapenem-resistance in Acinetobacter baumannii was 60.0%, while polymyxin and tigecycline showed good activity against Acinetobacter baumannii (5.5% and 4.5%). The prevalence of carbapenem-resistance in Pseudomonas aeruginosa was 18.9%. Conclusions:The BRICS surveillance results in 2021 shows that the main pathogens of blood stream infection in China are gram-negative bacteria, in which Escherichia coli is the most common. The MRSA incidence shows a further decreasing trend in China and the overall prevalence of vancomycin-resistant Enterococci is low. The prevalence of Carbapenem-resistant Klebsiella pneumoniae is still on a high level, but the trend is downwards.

Anti-platelet factor 4/heparin antibodies in patients with Hantaan virus infection.

Background: Hemorrhagic fever with renal syndrome (HFRS) induced by Hantaan virus infection and heparin-induced thrombocytopenia (HIT) are associated with symptoms such as thrombocytopenia and thrombosis. However, related molecules, such as anti-platelet factor 4 (PF4)/heparin antibodies, in patients with HFRS have not been evaluated. Objectives: To test plasma levels of anti-PF4/heparin antibodies and study the possible role of these antibodies in HFRS pathogenesis. Methods: Indirect ELISA was used to determine plasma levels of anti-PF4/heparin antibodies in 75 patients with HFRS and 20 normal controls. The 4Ts (thrombocytopenia, timing of platelet count fall, thrombosis or other sequelae, and other causes of thrombocytopenia) scoring system was used to determine the probability of HIT occurrence. A PF4-enhanced platelet activation assay was used to detect the pathological effects of anti-PF4/heparin antibodies. The laboratory/clinical features and viral load of all the patients were also assessed. Results: Of the 75 patients with HFRS enrolled in this study, 69 had thrombocytopenia. Platelet count was negatively correlated with Hantaan viral load. Moreover, the optical density (OD) values of plasma antibodies against PF4/heparin in normal controls were less than 0.65, 4 patients tested strongly positive for anti-PF4/heparin antibodies (OD values, 1.51-3.87), 21 patients were weakly positive (OD values, 0.66-0.74), and 50 patients were negative (OD values, 0.16-0.65). Moreover, all 4 patients who tested strongly positive for anti-PF4/heparin antibodies showed a low probability of HIT (4Ts score of 3 or less) and had negative results in the PF4-enhanced platelet activation assay. Conclusions: Hantaan virus infection produces nonpathogenic antibodies against PF4/heparin; however, the generation mechanism of these antibodies requires further study.

An Electrocatalytic Model of the Sulfur Reduction Reaction in Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) battery is strongly considered as one of the most promising energy storage systems due to its high theoretical energy density and low cost. However, the sluggish reduction kinetics from Li2 S4 to Li2 S during discharge hinders the practical application of Li-S batteries. Although various electrocatalysts have been proposed to improve the reaction kinetics, the electrocatalytic mechanism is unclear due to the complexity of sulfur reduction reactions (SRR). It is crucial to understand the electrocatalytic mechanism thoroughly for designing advanced electrocatalysts. Herein an electrocatalytic model is constructed to reveal the chemical mechanism of the SRR in Li-S batteries based on systematical density functional theory calculations, taking heteroatoms-doped carbon materials as an example. The adsorption energy of LiSy ⋅ (y=1, 2, or 3) radicals is used as a key descriptor to predict the reaction pathway, rate-determining step, and overpotential. A diagram for designing advanced electrocatalysts is accordingly constructed. This work establishes a theoretical model, which is an intelligent integration for probing the complicated SRR mechanisms and designing advanced electrocatalysts for high-performance Li-S batteries.

Untangling Degradation Chemistries of Lithium-Sulfur Batteries Through Interpretable Hybrid Machine Learning.

The development of emerging rechargeable batteries is often hindered by limited chemical understanding composing of entangled patterns in an enormous space. Herein, we propose an interpretable hybrid machine learning framework to untangle intractable degradation chemistries of conversion-type batteries. Rather than being a black box, this framework not only demonstrates an ability to accurately forecast lithium-sulfur batteries (with a test mean absolute error of 8.9 % for the end-of-life prediction) but also generate useful physical understandings that illuminate future battery design and optimization. The framework also enables the discovery of a previously unknown performance indicator, the ratio of electrolyte amount to high-voltage-region capacity at the first discharge, for lithium-sulfur batteries complying practical merits. The present data-driven approach is readily applicable to other energy storage systems due to its versatility and flexibility in modules and inputs.